🌿 SuitSpin Swimwear Dryer – Wood Effect | 95% Water Extraction in 10 Seconds

Natural elegance meets powerful centrifugal drying technology

📋 Product Overview

The SuitSpin Swimwear Dryer (SUSP006) is a premium Czech-engineered centrifugal drying system that extracts up to 95% of water from wet swimsuits in just 10 seconds. Featuring a warm wood-effect printed finish over marine-grade AISI 316 stainless steel, this model delivers natural elegance that harmonises beautifully with timber-decked pool areas, eco-inspired spas, and wellness retreats with organic aesthetics.

Unlike traditional heat-based dryers, the SuitSpin uses centrifugal force to gently spin water out of swimwear, preserving fabric quality and eliminating the risk of heat damage. This makes it safe for all swimsuit materials including lycra, nylon, and delicate fabrics. The process is simple: place a single piece of swimwear in the drum, close the lid, hold for 10 seconds, and remove your nearly dry swimsuit.

The SuitSpin helps maintain safer, cleaner facilities by significantly reducing water on changing room floors, preventing slips, and inhibiting mould and mildew growth. Each unit returns an average of 20,000 litres of water to the drainage system annually, supporting water recycling efforts and eliminating the need for plastic bags for wet swimwear.

Manufactured by Bamiko s.r.o. in the Czech Republic and imported to the UK by Certikin International Ltd, the SuitSpin is CE marked and fully compliant with European safety directives. The wood-effect model is perfect for natural spas, eco resorts, timber-style pool decks, wellness retreats, and any facility where organic design elements are a priority.

⭐ Key Features

✅ Ultra-Fast Drying – Removes up to 95% of water in just 10 seconds using centrifugal force

✅ No Heat Technology – Safe for all swimwear fabrics including lycra, nylon, and delicate materials

✅ Marine-Grade Construction – AISI 316 stainless steel body ensures corrosion resistance in humid environments

✅ Natural Wood-Effect Finish – Warm printed exterior complements timber-decked and eco-inspired interiors

✅ Simple Operation – Manual start, automatic stop mechanism requires no technical knowledge

✅ Built-In Safety Features – Integrated RCD, mechanical end switch, and thermal motor protection

✅ Low Power Consumption – Just 0.21 kW during operation, 0.003 kW on standby

✅ Quiet Operation – Operates at less than 70 dB during the 10-second cycle

✅ Easy Maintenance – Both inner and outer drums are accessible for quick cleaning

✅ Flexible Installation – Direct drain connection or optional PE water collector for locations without plumbing

✅ Environmentally Friendly – Returns approximately 20,000 litres of water annually to drainage systems

✅ European Quality – CE marked, manufactured in Czech Republic to EU safety standards

🔧 Technical Specifications

Specification	Value
Product Name	SuitSpin by Bamiko
Model Number	SUSP006
Type	OD 100
Model Designation	B 250-1
Finish	Wood-effect printed finish
Body Material	AISI 316 stainless steel
Top Cover Material	Grey polycarbonate (PE)
Drying Method	Centrifugal spin (no heat)
Drying Time	10 seconds per cycle
Water Extraction	Up to 95% moisture removed
Voltage	230V
Frequency	50-60 Hz
Phase	Single phase (1N~)
Power (In Operation)	0.21 kW
Power (Idle/Standby)	0.003 kW
Noise Level	<70 dB
Dimensions (H×W×D)	555 × 350 × 300 mm
Weight (Unit Only)	22 kg
Weight (With Packaging)	25 kg
Power Cable Length	2.5 m (pre-attached)
Drain Hose Length	Approximately 0.7 m
Drain Hose Inner Diameter	25 mm
Drain Hose Outer Diameter	31 mm
Fuse Rating	5 A
Manufacturer	Bamiko s.r.o., Czech Republic

🛡️ Safety Features & Certifications

Safety Feature	Description
Built-In RCD	Residual current device for electrical protection
Safety Mechanical End Switch	Stops motor immediately when lid is opened
IP66 Cable Glands	Dust-tight and protected against powerful water jets
IP65 Junction Box	Dust-tight and protected against water jets
IP65 Electrical Box	Dust-tight and protected against water jets
IP54 Motor	Protected against dust ingress and water splashing
Motor Thermal Protection	Built-in overheat protection shuts down motor if overheated
5A Fuse	Overcurrent protection
No Exposed Moving Parts	All rotating components are fully enclosed
Manual Start / Auto Stop	Cycle requires deliberate activation and stops automatically

Compliance & Certifications

Directive/Standard	Description
CE Marked	Full European conformity
2006/42/EU	Machinery Directive
2014/30/EU	Electromagnetic Compatibility (EMC) Directive
2011/65/EU	RoHS Directive

⚡ Electrical Requirements

Electrical Specification	Requirement
Supply Voltage	230V
Frequency	50-60 Hz
Phase	Single Phase
Power Consumption (Operating)	0.21 kW (210W)
Power Consumption (Standby)	0.003 kW (3W)
Fuse Rating	5 A
Cable Length	2.5 m (pre-attached)
RCD	Built-in

⚠️ IMPORTANT ELECTRICAL SAFETY:

All electrical wiring must be carried out by a qualified electrician in accordance with UK wiring regulations (BS 7671). The power supply should be in the vicinity of the installation location. Check that the product voltage matches your power supply before installation.

🔩 Installation Requirements

Location Requirements

Requirement	Specification
Environment	Dry or slightly humid only
Maximum Ambient Temperature	35°C
Minimum Distance from Water Sources	3 metres (to prevent splashing)
Wall Load Capacity	Minimum 30 kg hanging weight
Wall Load Capacity (with water container)	Minimum 50 kg hanging weight
Wall Type	Solid masonry recommended (not plasterboard)

Installation Dimensions

Measurement	Value
Wall Bracket Height (top edge from floor)	900 mm
Dryer Top Edge Height (from floor)	1080 mm
Operating Instructions Plaque Height (top edge)	1650 mm

Suitable Installation Locations

✅ Changing rooms
✅ Drying rooms
✅ Access corridors (where free passage is not restricted)
✅ Private pool houses
✅ Hotel spa areas

Unsuitable Installation Locations

❌ Directly next to swimming pools or spas
❌ Shower rooms
❌ Areas where water may splash onto the unit
❌ High humidity environments
❌ Plasterboard walls (insufficient load capacity)

Water Drainage Options

Option	Description
Direct Drain Connection	Connect drain hose directly to waste outlet in wall
Floor Drain	Position drain hose near or connected to floor drain
PE Water Collector	Optional 18-litre container (SUSPWCG) for locations without plumbing access

💡 Note: The drain hose must always slope downwards along its full length and must not be bent or twisted. Failure to ensure proper drainage can cause unpleasant odours and damage to the motor.

🛠️ Maintenance Guide

Daily Routine

Task	Description
Clean inner drum	Spray disinfectant inside drum, let it work, wipe with soft cloth
Test operation	Run cycle with wet cloth to verify water exits freely and is clear
Check cycle timing	Motor should start immediately, run for 10 seconds, and stop instantly

Weekly Routine

Task	Description
Clean exterior	Use lukewarm water with mild detergent – avoid abrasive products on printed finish
Clean plastic parts	Soft cloth only – no alcohol, flammable, or abrasive products
Disinfect inner drum	Spray disinfectant, let it work, clean thoroughly with soft cloth
Check drain hose	Verify water flows freely and is clear
Inspect inner drum	Check drum is intact and level (not tilted to one side)
Check bristle ring	Verify protective bristle ring is fixed properly and intact

Monthly Routine

Task	Description
Deep clean exterior	Thorough cleaning of all external surfaces with appropriate cleaners
Clean between drums	Remove white plastic plate, clean space between inner and outer drums with bottle brush
Check shock absorbers	Verify springs are attached and intact
Check drain outlet	Ensure hose connection at bottom of outer drum is not clogged
Test RCD	Press TEST button – switch must move to OFF position
Full operation test	Run complete cycle and verify all functions

⚠️ IMPORTANT: Always isolate the power supply before any cleaning or maintenance. Never pour water inside the device.

🎯 Ideal Applications

Application	Suitability	Notes
🌿 Natural Spas & Wellness Retreats	✅ Excellent	Organic design environments
🏕️ Eco Resorts & Lodges	✅ Excellent	Sustainable, nature-inspired facilities
🪵 Timber-Decked Pool Areas	✅ Excellent	Matches wooden surroundings
♨️ Scandinavian-Style Spas	✅ Excellent	Nordic design aesthetics
🏠 Private Pool Houses	✅ Excellent	Rustic residential installations
🏨 Country Hotels & Estates	✅ Excellent	Traditional and heritage settings
🧘 Yoga & Meditation Centres	✅ Excellent	Calm, natural environments

❓ Frequently Asked Questions

Q: How does the SuitSpin work? A: The SuitSpin uses centrifugal force to spin water out of swimwear – similar to the spin cycle on a washing machine but faster and gentler. Place a single piece of swimwear in the drum, close the lid, hold for 10 seconds, and the spinning action extracts up to 95% of the water. No heat is used.

Q: Is it safe for all types of swimwear? A: Yes, because the SuitSpin uses centrifugal force rather than heat, it is safe for all swimwear fabrics including lycra, nylon, polyester, and delicate materials. The gentle spinning action does not damage elastic fibres.

Q: Can I dry multiple swimsuits at once? A: No, the SuitSpin is designed for ONE piece of swimwear at a time. Attempting to dry multiple items may cause excessive vibration and could damage the machine.

Q: How much power does it use? A: The SuitSpin is very energy efficient, consuming just 0.21 kW (210 watts) during the 10-second operating cycle and only 0.003 kW (3 watts) on standby.

Q: What if I don’t have a drain nearby? A: An optional PE water collector (SUSPWCG, available separately) can be wall-mounted beneath the unit. It has an 18-litre capacity and is emptied manually when full.

Q: How loud is it? A: The SuitSpin operates at less than 70 dB during its 10-second cycle – comparable to a normal conversation or background music.

Q: What maintenance is required? A: Daily disinfecting of the inner drum, weekly cleaning of exterior surfaces and checking the drain hose, and monthly deep cleaning including RCD testing. Detailed maintenance instructions are provided.

Q: Can it be connected to a coin or token system? A: Yes, the SuitSpin can be connected to coin machines or chip systems. This requires a qualified electrician and specific timer settings as detailed in the installation manual.

Q: What is the warranty? A: Contact Parts4Tubs for full warranty terms and coverage information.

Q: What wall type is required for installation? A: The wall must support a minimum hanging weight of 30 kg (50 kg if using the optional water collector). Solid masonry is recommended – plasterboard walls are not suitable.

Q: How should I clean the wood-effect finish? A: Use lukewarm water with mild detergent and a soft cloth. Avoid abrasive cleaners or products containing alcohol as these may damage the printed finish.

📥 Downloads & Resources

📄 User Manual (PDF) – Complete operating instructions and safety information

📄 Installation Manual (PDF) – Step-by-step installation guide

📄 Daily & Weekly Cleaning Guide (PDF) – Routine maintenance procedures

📄 Monthly Cleaning Guide (PDF) – Deep cleaning procedures

📄 Water Disposal Installation Guide (PDF) – Drainage connection options

📄 Product Brochure (PDF) – Overview and colour options

🏆 Why Choose the SuitSpin Swimwear Dryer

✅ Fast Results – 95% water extraction in just 10 seconds saves time for users

✅ Fabric Safe – No heat means no damage to swimwear, extending garment life

✅ Facility Protection – Reduces floor moisture, preventing slips and mould growth

✅ Energy Efficient – Low power consumption of just 210 watts during operation

✅ Durable Construction – Marine-grade AISI 316 stainless steel resists corrosion

✅ Safe Operation – Multiple built-in safety features including RCD and thermal protection

✅ European Quality – CE marked, manufactured to EU safety directives

✅ Environmentally Responsible – Eliminates plastic bags and returns water to drainage systems

✅ Easy Maintenance – Accessible design for quick cleaning and servicing

✅ Natural Aesthetics – Warm wood-effect finish brings organic elegance to wellness spaces

🤝 Why Buy from Parts4Tubs

✅ UK-Based Company – Local support from pool and spa equipment specialists based in Northamptonshire

✅ Fast UK Delivery – Quick dispatch to get your facility equipped promptly

✅ Expert Technical Advice – Knowledgeable team to assist with installation queries

✅ Competitive Pricing – Great value on quality European-manufactured equipment

✅ Full Documentation – Complete user manuals, installation guides, and maintenance instructions

✅ Easy Returns – 30-day returns policy for peace of mind

✅ Established Reputation – Built on the success of buildahottub.com

🌟 Summary

The SuitSpin Swimwear Dryer (SUSP006) in wood effect offers fast, safe, and efficient swimwear drying using centrifugal technology. Extracting up to 95% of water in just 10 seconds without heat, it protects swimwear fabrics whilst keeping changing facilities dry and safe. Built from marine-grade AISI 316 stainless steel with comprehensive safety features including built-in RCD, it’s CE marked and manufactured in Europe. The warm wood-effect printed finish brings natural elegance to eco resorts, wellness retreats, timber-decked pool areas, and spa facilities where organic design elements enhance the guest experience. Order from Parts4Tubs for fast UK delivery.