💧 SuitSpin PE Water Collector – Grey | 18 Litre Capacity for SuitSpin Dryers

The essential accessory for SuitSpin installations without direct drainage

📋 Product Overview

The SuitSpin PE Water Collector (SUSPWCG) is the official accessory designed for use with all SuitSpin Swimwear Dryers when a direct waste drain connection is not available. This 18-litre capacity polyethylene container mounts directly beneath the SuitSpin dryer unit, collecting extracted water hygienically and efficiently.

Each SuitSpin drying cycle extracts up to 95% of water from swimwear, which must be properly disposed of. While direct drain connections or floor drains are the preferred installation methods, many facilities lack convenient drainage at the desired installation location. The SUSPWCG water collector provides a practical, hygienic solution that allows you to install your SuitSpin dryer anywhere with suitable wall support – no plumbing required.

The grey PE (polyethylene) construction is lightweight yet durable, resistant to moisture and corrosion in humid poolside environments. The container is designed for easy manual emptying when full, with a simple lift-off removal from its wall bracket. For typical usage patterns, the 18-litre capacity provides ample collection volume before emptying is required.

Manufactured by Bamiko s.r.o. in the Czech Republic and imported to the UK by Certikin International Ltd, the water collector is fully compatible with all SuitSpin dryer models including Blue (SUSP001), White (SUSP002), Stainless Steel (SUSP003), Marble (SUSP004), Matt Black (SUSP005), and Wood Effect (SUSP006).

⭐ Key Features

✅ 18-Litre Capacity – Generous volume reduces emptying frequency for busy facilities

✅ Universal Compatibility – Works with all SuitSpin dryer models (SUSP001-SUSP006)

✅ Durable PE Construction – High-density polyethylene resists moisture and corrosion

✅ Wall-Mounted Design – Mounts directly beneath the SuitSpin dryer for a clean installation

✅ No Plumbing Required – Perfect solution when direct drainage is unavailable

✅ Easy Manual Emptying – Simple lift-off removal when container needs emptying

✅ Hygienic Collection – Enclosed design prevents splashing and odours

✅ Lightweight – Easy to handle when emptying

✅ Neutral Grey Colour – Complements all SuitSpin dryer finishes

✅ European Quality – Manufactured by Bamiko s.r.o. in Czech Republic

🔧 Technical Specifications

Specification	Value
Product Name	SuitSpin PE Water Collector
Model Number	SUSPWCG
Colour	Grey
Material	High-density polyethylene (PE)
Capacity	18 litres
Mounting Type	Wall-mounted bracket
Emptying Method	Manual (lift-off and empty)
Drain Hose Insertion	Through hole in top of container
Manufacturer	Bamiko s.r.o., Czech Republic

🔗 Compatibility

The SUSPWCG water collector is compatible with all SuitSpin Swimwear Dryer models:

Model	Product	Compatible
SUSP001	SuitSpin Dryer – Blue	✅ Yes
SUSP002	SuitSpin Dryer – White	✅ Yes
SUSP003	SuitSpin Dryer – Stainless Steel	✅ Yes
SUSP004	SuitSpin Dryer – Marble Effect	✅ Yes
SUSP005	SuitSpin Dryer – Matt Black	✅ Yes
SUSP006	SuitSpin Dryer – Wood Effect	✅ Yes

🔩 Installation Requirements

Wall Requirements

Requirement	Specification
Wall Load Capacity	Minimum 50 kg hanging weight
Wall Type	Solid masonry recommended
Position	Directly beneath SuitSpin dryer unit

⚠️ IMPORTANT: When using the water collector, the wall must support a minimum of 50 kg hanging weight (increased from 30 kg for dryer-only installations). This accounts for the combined weight of the dryer, the water collector, and collected water when full. Plasterboard walls are not suitable.

Installation Position

Measurement	Value
SuitSpin Dryer Top Edge (from floor)	1080 mm
Water Collector Position	Directly beneath dryer
Drain Hose Extension	50-100 mm below top of container

Drain Hose Connection

The SuitSpin dryer’s drain hose connects to the water collector as follows:

1. After installing the dryer and water collector on the wall, shorten the drain hose so it extends 50-100 mm below the top of the water container
2. Insert the drain hose through the hole in the top of the container
3. Ensure the hose is not bent or twisted
4. The hole within the container will hold the hose in place

💡 Note: Installation must be completed in accordance with all applicable local plumbing codes and regulations. If in doubt, consult a qualified plumber.

🛠️ Maintenance Guide

Regular Maintenance

Task	Frequency	Description
Check water level	Daily	Monitor fill level to prevent overflow
Empty container	As required	Remove from bracket and empty when approaching capacity
Clean interior	Weekly	Rinse with clean water and mild disinfectant
Inspect mounting	Monthly	Check bracket is secure and wall fixings are tight
Check drain hose	Monthly	Verify hose is not blocked, bent, or twisted

Emptying the Water Collector

1. Lift the water collector from its wall bracket
2. Carry to a suitable drain or disposal point
3. Pour out collected water
4. Rinse interior if required
5. Return to wall bracket beneath dryer
6. Ensure drain hose is correctly positioned through top hole

⚠️ IMPORTANT: Do not allow the water collector to overflow. Check daily and empty when approaching capacity. Overflow can create slip hazards and hygiene issues.

🎯 When You Need This Accessory

The SUSPWCG water collector is the ideal solution when:

Scenario	Solution
❌ No waste drain at installation location	✅ Use water collector
❌ No floor drain nearby	✅ Use water collector
❌ Listed building restrictions on plumbing	✅ Use water collector
❌ Temporary or mobile installation required	✅ Use water collector
❌ Rental premises where plumbing changes not permitted	✅ Use water collector
✅ Direct waste drain available	Direct connection preferred
✅ Floor drain within reach	Floor drain connection preferred

❓ Frequently Asked Questions

Q: How often will I need to empty the water collector? A: This depends on usage. The SuitSpin extracts approximately 50-100ml of water per drying cycle. With 18-litre capacity, the collector can handle 180-360 cycles before needing to be emptied. For busy facilities, daily emptying may be required; for lighter use, weekly emptying may suffice.

Q: Is the water collector included with the SuitSpin dryer? A: No, the water collector is sold separately as an optional accessory. SuitSpin dryers are designed primarily for direct drain or floor drain connections. The water collector is for installations where these options are not available.

Q: Can I use any container instead of the official water collector? A: We recommend using the official SUSPWCG water collector for best results. It is specifically designed to mount beneath the SuitSpin dryer and accept the drain hose correctly. Using alternative containers may create installation challenges and hygiene issues.

Q: What happens if the water collector overflows? A: Overflow creates slip hazards and hygiene issues. Monitor the water level daily and empty before it reaches capacity. For high-volume facilities, consider whether a plumbed drainage solution would be more practical.

Q: Does the water collector require any special cleaning products? A: No, simply rinse with clean water and a mild disinfectant weekly. Avoid harsh chemicals that could damage the polyethylene material.

Q: Can I install the water collector on plasterboard walls? A: No. The combined weight of the dryer, water collector, and collected water requires a wall capable of supporting minimum 50 kg hanging weight. Solid masonry walls are recommended.

Q: Is the water collector suitable for outdoor installations? A: The water collector is made from durable PE plastic suitable for both indoor and outdoor poolside environments. However, ensure it is protected from direct sunlight exposure which could degrade plastics over time.

Q: What colour options are available? A: The water collector is available in grey only, which complements all SuitSpin dryer colour options.

📥 Downloads & Resources

📄 Water Disposal Installation Guide (PDF) – Complete installation instructions for all drainage options

📄 SuitSpin User Manual (PDF) – Full dryer operating instructions including water collector information

📄 Product Brochure (PDF) – SuitSpin product range overview

🏆 Why Choose the Official SuitSpin Water Collector

✅ Purpose-Built Design – Engineered specifically for SuitSpin dryers

✅ Perfect Fit – Mounts seamlessly beneath any SuitSpin model

✅ Generous Capacity – 18 litres reduces emptying frequency

✅ Durable Construction – PE plastic withstands poolside environments

✅ Hygienic Solution – Enclosed design prevents splashing and odours

✅ Easy Maintenance – Simple lift-off emptying and cleaning

✅ European Quality – Manufactured to same standards as SuitSpin dryers

✅ Full Support – Backed by Parts4Tubs and Certikin

🤝 Why Buy from Parts4Tubs

✅ UK-Based Company – Local support from pool and spa equipment specialists based in Northamptonshire

✅ Fast UK Delivery – Quick dispatch to complete your SuitSpin installation

✅ Expert Technical Advice – Knowledgeable team to assist with installation queries

✅ Competitive Pricing – Great value on quality European-manufactured accessories

✅ Full Documentation – Complete installation guides and user manuals

✅ Easy Returns – 30-day returns policy for peace of mind

✅ Established Reputation – Built on the success of buildahottub.com

✨ Summary

The SuitSpin PE Water Collector (SUSPWCG) is the essential accessory for SuitSpin Swimwear Dryer installations where direct drainage is not available. With 18-litre capacity and durable grey PE construction, it mounts directly beneath any SuitSpin dryer model, collecting extracted water hygienically for manual emptying. The wall-mounted design requires no plumbing, making it perfect for facilities without convenient drain access. Compatible with all SuitSpin dryer colours and models (SUSP001-SUSP006), it’s manufactured by Bamiko in the Czech Republic to the same quality standards as the dryer units. Order from Parts4Tubs for fast UK delivery.