🏊 Plastica iFlo Pool Pump 1HP (0.75kW) Single Phase – Reliable Circulation for Above-Ground & In-Ground Pools

Exceptional Performance, Unbeatable Value – The Smart Choice for Pool Owners

Transform your pool maintenance experience with the Plastica iFlo 1HP Pool Pump. Engineered for reliability and built to last, this powerful circulation pump delivers professional-grade performance at less than half the price of comparable models. Whether you’re managing an above-ground pool or a small in-ground installation, the iFlo pump ensures crystal-clear water with virtually zero maintenance headaches.

✅ Proven Reliability – Virtually zero failure rate
✅ Outstanding Value – Less than half the price of comparable pumps
✅ Simple to Install – Standard 1.5″ connections and straightforward setup
✅ Ultra Quiet Operation – Smooth, low-noise performance

Why Pool Owners Choose the Plastica iFlo Pump

💰 Outstanding Value Without Compromise

Get premium pump performance without the premium price tag. The iFlo pump costs significantly less than competing brands while matching or exceeding their reliability and efficiency. This isn’t about cutting corners – it’s about smart engineering that eliminates unnecessary costs without sacrificing quality.

🔧 Built for the Long Haul

The heavy-duty air-cooled motor and reinforced pump casing are designed to handle years of continuous operation. With a proven track record of extremely low failure rates, you can trust the iFlo pump to keep working season after season. The robust construction withstands the demands of both residential and light commercial pool applications.

⚡ Self-Priming Efficiency

No more frustrating pump priming struggles. The self-priming design with high-load impeller means faster startup times and consistent performance. The pump automatically draws water from your pool, even after extended periods of inactivity, making seasonal startups effortless.

🔇 Ultra Quiet Operation

Unlike noisy older pumps that disturb your outdoor relaxation, the iFlo runs whisper-quiet. The precision-balanced impeller and quality motor bearings ensure smooth, low-vibration operation. You’ll barely notice it’s running, making it perfect for installations near patios, gardens, or neighboring properties.

🧺 Oversized Strainer Basket = Less Maintenance

The extra-large debris basket captures more leaves, hair, and particles before they reach your filter. This means fewer interruptions to clean the basket and better protection for your filtration system. Quick-access design lets you check and empty the basket in seconds.

📊 Complete Technical Specifications

Specification	Detail
Brand	Plastica
Model	iFlo Series
Power Rating	1 HP / 0.75 kW
Voltage	Single Phase (check nameplate for specific voltage)
Motor Type	Heavy-duty, air-cooled with thermal protection
Pump Design	Self-priming centrifugal
Suction Connection	1.5″ (1.5 inch)
Delivery Connection	1.5″ (1.5 inch)
Connection Type	Standard pool fittings
Priming Capability	Self-priming (may take several minutes depending on installation height)
Maximum Water Temperature	35°C (95°F)
Strainer Basket	Oversized capacity with transparent cover
Operation Noise Level	Ultra quiet – low vibration design
Installation Position	Horizontal shaft mounting (pre-filter cover on top)
Maximum Recommended Height Above Water	3 metres (to optimize priming performance)
Drain Plug	Included for winterization
Cable Type Required	H07 RN-F, 3 x 1mm² minimum
Electrical Protection	Built-in thermal motor protection + RCD required (30mA max)
Compliance	EN 60335-1, EN 60335-2-41, EMC 2004/108/EC, LVD 2006/95/EC
Environmental	WEEE 2002/96/EC, RoHS 2002/95/EC compliant
Warranty – Motor	2 Years
Warranty – Pump Body	1 Year
Warranty – Pump Seal	1 Year

✅ Top Features & Benefits

🎯 1. Proven Reliability You Can Count On

Virtually zero failure rate in real-world conditions means you spend less time troubleshooting and more time enjoying your pool. The iFlo has earned a reputation for dependable operation among pool professionals and homeowners alike. With a 2-year motor warranty, you have double the peace of mind.

💪 2. Heavy-Duty Motor Engineering

The air-cooled motor design prevents overheating during extended run times. Built-in thermal protection automatically shuts down the motor if temperatures exceed safe limits, protecting your investment from damage. The extended 2-year motor warranty demonstrates the manufacturer’s confidence in long-term reliability.

🌊 3. Optimized Water Flow

The high-efficiency impeller design maximizes circulation while minimizing energy consumption. Your pool water cycles through the filtration system more effectively, resulting in clearer water and reduced chemical usage.

🔒 4. Leak-Resistant Construction

Precision-engineered seals and robust pump casing prevent water leaks and air infiltration. This means consistent performance without the frustration of hunting down leak sources or dealing with prime-losing issues. The pump seal warranty ensures leak-free operation throughout your first year.

🛠️ 5. Simple Installation & Maintenance

Straightforward mounting requirements and standard 1.5″ pool fitting connections make installation quick for professionals or confident DIYers. The transparent strainer cover lets you visually monitor debris accumulation without disassembly. No special tools or complicated procedures required.

🔇 6. Ultra Quiet Performance

Enjoy your pool area without the constant drone of a noisy pump. The iFlo’s precision-engineered motor and balanced impeller produce minimal operational noise. Perfect for residential installations where peace and quiet matter.

🧊 7. Winterization-Ready Design

The convenient drain plug allows complete water evacuation for winter storage. This prevents freeze damage and makes spring startup hassle-free. Store the pump in a dry, ventilated area and it’ll be ready to go next season.

🔌 8. Safety-First Electrical Design

Compliant with international pool equipment standards, the iFlo pump includes equipotential bonding terminals and requires RCD protection for maximum electrical safety around water.

Backed by Comprehensive Warranty Coverage:

• ⚡ 2 Years Motor Warranty – Double the protection for the heart of your pump
• 🔩 1 Year Pump Body Warranty – Quality construction you can trust
• 🔒 1 Year Pump Seal Warranty – Leak-free operation guaranteed

🏊 Ideal Applications & Pool Compatibility

The Plastica iFlo 1HP pump is perfectly suited for:

✅ Above-Ground Pools

• Small to medium-sized above-ground pools (up to approximately 60,000 litres)
• Intex, Bestway, and other above-ground pool brands
• Seasonal and year-round installations

✅ Small In-Ground Pools

• Compact in-ground installations
• Plunge pools and swim spas
• Pools with sand or cartridge filtration systems

✅ Pool Heating Systems

• Compatible with solar heating systems
• Works with heat pump installations
• Maintains proper flow rates for effective heat transfer

✅ Water Features & Circulation

• Fountains and water jets
• Waterfall features
• Enhanced circulation for problem areas

✅ Residential & Light Commercial

• Single-family home pools
• Holiday lets with pools
• Small hotel or B&B pool facilities

📐 Pool Sizing & Performance Guide

Recommended Pool Volumes

The 1HP (0.75kW) iFlo pump is designed to effectively circulate pools within these approximate volumes:

Pool Type	Recommended Volume	Turnover Time*
Above-Ground Pools	Up to 60,000 litres	6-8 hours
Small In-Ground Pools	30,000 – 50,000 litres	6-8 hours
Plunge Pools	15,000 – 30,000 litres	4-6 hours

*Turnover time = time to cycle entire pool volume through the filtration system

💡 Pro Tip: For optimal water quality, aim to run your pump long enough to complete 1-2 full turnovers daily. In hot weather or with heavy pool usage, increase run times accordingly.

Installation Height Considerations

Critical for optimal performance: The iFlo pump should be installed as close to pool water level as possible.

Height Above Water	Performance Impact
0-1 metre	✅ Optimal priming & flow
1-2 metres	✅ Good performance, slight delay in priming
2-3 metres	⚠️ Acceptable, priming may take several minutes
Over 3 metres	❌ Not recommended – priming difficulties likely

⚠️ Important: If the pump must be installed above 2 metres, ensure all suction-side connections are completely airtight and consider installing a foot valve at the pool intake to assist priming.

⚙️ Installation Requirements & Guidelines

📍 Location Requirements

✅ Must Be:

• Positioned on a firm, level base
• Installed with shaft horizontal (strainer cover on top)
• In a dry, well-ventilated area
• Protected from rain and moisture
• Minimum 2 metres from pool edge (electrical safety)
• Easily accessible for maintenance

❌ Must NOT Be:

• Installed in areas prone to flooding
• Positioned where terminal box can get wet
• Mounted vertically or at an angle
• In unventilated enclosures (motor needs airflow)

🔧 Plumbing Installation Best Practices

Connection Specifications:

• Suction (Inlet) Port: 1.5 inches
• Delivery (Outlet) Port: 1.5 inches
• Recommended Pipe Size: 1.5″ or 2″ for optimal flow

Pipe Sizing:

• Use 1.5″ minimum pipe size to match pump connections
• 2″ pipes reduce head loss and improve efficiency
• Never use pipes smaller than the pump connections

Reduce Head Loss:

• Minimize length of suction (inlet) pipe
• Avoid unnecessary bends and elbows
• Use large-radius sweeping bends instead of 90° elbows
• Every bend and fitting adds resistance – keep it simple

Sealing:

• Use PTFE tape on all threaded connections
• Wrap clockwise (looking at the threads) 3-4 times
• Ensure all unions are new and clean
• Check for air leaks before final startup

Valves (Recommended): Install isolation valves (ball valves or gate valves) on both suction and discharge sides for easier maintenance and servicing.

Support: Pipe runs must be independently supported – do NOT allow pipes to put stress on the pump body. Use proper pipe hangers or supports every 1-1.5 metres.

🔌 Electrical Requirements (CRITICAL)

⚠️ WARNING: Electrical installation must be completed by a qualified electrician and comply with all local regulations.

Mandatory Safety Requirements:

• ✅ Residual Current Device (RCD) with ≤30mA trip rating
• ✅ All-pole isolation switch with adequate contact separation
• ✅ Equipotential bonding to pool electrical system
• ✅ Power supply minimum 3.5 metres from pool edge
• ✅ Cable type: H07 RN-F, 3 x 1mm² or larger
• ✅ Verify voltage on pump nameplate matches mains supply

Built-in Protection: The motor includes thermal overload protection that automatically shuts down the pump if it overheats.

---

🚀 Startup & Operation Procedure

First-Time Startup (Initial Priming)

Step 1: Check Electrical Verify that mains voltage and frequency match the pump nameplate specifications.

Step 2: Check Rotation Manually rotate the pump shaft to ensure it spins freely. If stiff or stuck, investigate before applying power.

Step 3: Fill the Pump

1. Unscrew the transparent strainer cover
2. Fill the pump body with clean water up to the lower level of the suction pipe
3. Securely tighten the cover back in place

Step 4: Open Valves Open all suction (inlet) and delivery (outlet) valves fully.

Step 5: Start Motor Switch on the power. Wait for the self-priming process to complete. Priming time varies (few seconds to several minutes) depending on installation height and pipe configuration.

Step 6: Verify Prime The pump is properly primed when the water level stabilizes just below the transparent strainer cover. You should see consistent flow and hear a smooth, quiet motor sound.

⚠️ NEVER operate the pump dry or with inlet blocked. Running without water will cause immediate damage and void warranty.

Regular Operation

Once primed, the iFlo pump can be operated with standard pool timers or controllers. For daily filtration:

• Summer (Heavy Use): 8-12 hours per day
• Spring/Autumn (Moderate Use): 6-8 hours per day
• Winter (Light Use/Covered): 2-4 hours per day or as needed

Adjust run times based on water clarity, bather load, and weather conditions.

🧰 Maintenance & Winterization

Regular Maintenance (Minimal Required!)

Weekly During Pool Season:

• Visually inspect strainer basket through transparent cover
• Clean basket when 1/2 to 3/4 full of debris

Monthly:

• Check all connections for leaks or moisture
• Verify motor is running smoothly without unusual noise
• Listen for the characteristic quiet operation – changes may indicate issues

Seasonally:

• Inspect strainer cover seal/gasket – replace if cracked or compressed
• Check pump mounting – ensure base is still secure
• Verify electrical connections remain tight and corrosion-free

Cleaning the Strainer Basket

1. Turn off pump power (ensure electrical safety)
2. Close suction and delivery valves
3. Loosen the cover retaining ring or nuts
4. Remove transparent cover
5. Lift out and empty basket
6. Rinse basket thoroughly
7. Inspect cover gasket – replace if damaged
8. Reassemble and tighten securely
9. Open valves and restart pump

💡 Tip: Keep a spare gasket on hand for quick replacement without waiting for parts delivery. This keeps you covered under the 1-year seal warranty.

Winter Storage & Freeze Protection

If your area experiences freezing temperatures:

1. Turn off and disconnect electrical power
2. Close all valves on suction and discharge sides
3. Remove drain plug (located on pump body)
4. Drain completely – tilt pump if necessary to remove all water
5. Remove strainer basket and clean thoroughly
6. Store indoors in a dry, ventilated area away from chemicals
7. Keep drain plug with pump for spring reinstallation

⚠️ Freeze Damage Warning: Water left in the pump can freeze and crack the housing. This damage is NOT covered under warranty. Always drain completely before storage in freezing conditions.

🔧 Troubleshooting Guide

Problem	Possible Causes	Solutions
Pump won’t prime	Air leaks in suction line	Check all 1.5″ connections, unions, and seals for tightness
	Suction pipe not filled with water	Re-prime by filling pump housing with water
	Pump installed too high	Maximum 3m above water level – consider lowering pump
	Incorrect cover seal	Clean seating surface and verify gasket condition
Low flow rate	Clogged strainer basket	Clean basket and check for obstructions
	Clogged filter	Backwash or clean pool filter
	Undersized pipes	Verify pipe diameter is at least 1.5″ (matches pump ports)
	Air in system	Check for leaks allowing air entry
Strange motor noise	Air entering pump	Verify all suction-side connections are airtight
	Refuse/debris in impeller	Turn off power, inspect and clean pump internals
	Motor bearings worn	Contact professional – may require service under warranty
Motor won’t start	No electrical power	Check circuit breaker, RCD, and isolation switch
	Thermal protection tripped	Allow motor to cool, check for cause of overheating
	Incorrect voltage	Verify supply voltage matches nameplate rating
	Motor seized	Check shaft rotation – seek professional help if stuck
Motor hums but doesn’t turn	Capacitor failure (if equipped)	Contact qualified service technician
	Blocked impeller	Turn off power, check for debris blocking rotation
Pump louder than usual	Air in system	Check suction-side connections and prime properly
	Bearing wear	May require professional service – check warranty coverage

⚠️ Safety First: Always disconnect electrical power before inspecting or servicing the pump. If you’re unsure about any electrical or mechanical issue, consult a qualified professional.

🛡️ Warranty Note: For issues covered under the motor (2 years), pump body (1 year), or seal (1 year) warranty, contact your supplier before attempting repairs to avoid voiding coverage.

🛡️ Warranty Coverage & Protection

Comprehensive Peace of Mind

The Plastica iFlo pump comes with industry-leading warranty coverage that demonstrates the manufacturer’s confidence in quality and durability:

Component	Warranty Period	Coverage Details
Motor	⚡ 2 YEARS	Manufacturing defects, thermal protection failures, bearing issues, electrical component failures
Pump Body	🔩 1 YEAR	Casing cracks, manufacturing defects, structural failures (not including freeze damage)
Pump Seal	🔒 1 YEAR	Seal failures, leaks from seal degradation, material defects

What’s Covered

✅ Manufacturing defects in materials or workmanship
✅ Component failures under normal operating conditions
✅ Motor issues including thermal protection and windings
✅ Seal leaks not caused by improper installation
✅ Pump body cracks or structural failures

What’s NOT Covered

❌ Damage from improper installation or electrical connection
❌ Freeze damage from failure to drain before storage
❌ Running the pump dry or with blocked inlet
❌ Damage from operating outside specified parameters
❌ Normal wear items (gaskets, O-rings after warranty period)
❌ Damage from chemicals, debris, or foreign objects
❌ Modifications or repairs by unauthorized personnel

Making a Warranty Claim

1. Keep your proof of purchase – you’ll need this for any warranty claim
2. Document the issue – photos and description of the problem
3. Contact your supplier – they’ll guide you through the warranty process
4. Professional installation recommended – improper DIY installation may void warranty
5. Follow all installation instructions – compliance is required for warranty validity

💡 Pro Tip: Register your pump with your supplier after purchase. This creates a record of your warranty start date and makes future claims smoother.

❓ Frequently Asked Questions

What size pool is the iFlo 1HP pump suitable for?

The iFlo 1HP pump is ideal for above-ground pools and small in-ground pools with volumes up to approximately 60,000 litres. It works best when it can complete a full water turnover (cycling the entire pool volume through the filter) in 6-8 hours. For example, a 40,000-litre pool would be perfectly matched with this pump’s capacity.

Can I install the pump myself or do I need a professional?

While experienced DIYers can handle the mechanical plumbing installation (the standard 1.5″ connections are straightforward), electrical connection must be completed by a qualified electrician to comply with pool electrical safety regulations. Improper electrical installation can be extremely dangerous and will void your warranty. The pump must be connected through a 30mA RCD and properly bonded to the pool’s equipotential system.

What size pipes should I use with the 1.5″ connections?

Use 1.5″ pipes as a minimum to match the pump’s suction and delivery ports. For optimal performance and reduced head loss, consider using 2″ pipes with reducer fittings at the pump connections. Never use pipes smaller than 1.5″ as this will severely restrict flow and reduce efficiency.

How far can the pump be located from the pool?

For electrical safety, the pump must be at least 2 metres from the pool edge, with power connections at least 3.5 metres away. From a performance perspective, install as close to the pool water level as practical. The pump can be up to 3 metres above water level, but lower heights result in faster priming and better efficiency.

Why won’t my pump prime?

Priming issues usually stem from air leaks in the suction (inlet) side of the system. Check every connection, union, and seal between the pool and the pump inlet for tightness. Ensure the pump housing is filled with water before starting. If installed more than 2 metres above water level, priming will naturally take longer. Using PTFE tape on all threaded connections and ensuring gaskets are in good condition typically resolves priming problems.

How quiet is “ultra quiet”?

The iFlo operates at significantly lower noise levels than standard pool pumps thanks to its precision-balanced impeller and quality motor bearings. You’ll hear a gentle hum during operation rather than the loud droning typical of older or cheaper pumps. It’s quiet enough to run during evening pool use without disturbing conversation or relaxation.

How often should I clean the strainer basket?

This depends on your pool’s environment and usage. During heavy leaf-fall seasons or periods of high bather load, you might need to check it every few days. The transparent cover lets you visually monitor debris accumulation without opening anything. Generally, clean the basket when it’s 1/2 to 3/4 full. A fuller basket restricts flow and reduces pump efficiency.

Can this pump be used with a heated pool or heat pump?

Yes! The iFlo pump is compatible with pool heating systems including solar heaters, gas heaters, and heat pumps. Ensure the water temperature doesn’t exceed 35°C (95°F) and maintain proper flow rates required by your heating equipment. The pump’s consistent circulation helps distribute heat evenly throughout the pool.

What happens if the pump runs dry (without water)?

Never run the pump dry. Operating without water causes immediate damage to seals, impeller, and motor. The built-in thermal protection should shut down the motor, but damage may already have occurred. Dry running voids your warranty. Always ensure the pump is properly primed and never operate with the inlet blocked.

How long should I run the pump each day?

Most pool experts recommend running the pump long enough to turn over the entire pool volume 1-2 times per day. For typical pools matched to this pump (30,000-60,000 litres), this translates to 6-12 hours daily depending on season, weather, and usage. Summer months or heavy usage periods may require longer run times. Use a timer to automate daily operation.

What maintenance does the pump require?

The iFlo is designed for low-maintenance operation. Regular tasks include: cleaning the strainer basket as needed (weekly during heavy use), checking for leaks monthly, and inspecting the cover gasket seasonally. Before winter or extended shutdown periods, drain the pump completely to prevent freeze damage. There are no scheduled motor maintenance items – the sealed motor design is maintenance-free under normal operation.

Can I use this pump for a saltwater pool?

Yes, the iFlo pump is compatible with saltwater chlorination systems. The robust construction and quality materials resist corrosion from salt. However, as with any saltwater application, rinse external surfaces periodically and monitor for any signs of corrosion on metal fasteners or connections. Maintain proper water chemistry to minimize corrosive effects on all pool equipment.

How do I know if a problem is covered under warranty?

Review the warranty coverage section above. Generally, manufacturing defects and component failures under normal use are covered. Issues caused by improper installation, freeze damage, running dry, or neglect are not covered. When in doubt, contact your supplier before attempting any repairs – unauthorized repairs may void your warranty. Keep your proof of purchase and installation records.

What’s the difference between the motor warranty and pump body warranty?

The motor warranty (2 years) covers the electric motor, thermal protection, windings, bearings, and electrical components. The pump body warranty (1 year) covers the plastic housing, strainer basket assembly, and structural integrity. The seal warranty (1 year) specifically covers the mechanical seal that prevents water leaking between the motor and pump sections.

💡 Pro Tips for Maximum Performance

🔹 Install a Check Valve: Adding a foot valve or check valve on the suction line helps maintain prime during shutdowns, making restarts faster and easier.

🔹 Use Quality Pipe: Don’t cheap out on plumbing materials. Quality PVC pipes and fittings with properly applied PTFE tape prevent air leaks that cause endless priming headaches. The pump’s 1.5″ connections work with standard pool plumbing.

🔹 Shade the Pump: If possible, position the pump in a shaded area. This reduces thermal stress on the motor and slightly improves efficiency, potentially extending your 2-year motor warranty period.

🔹 Keep the Area Clean: Ensure good airflow around the motor. Don’t let leaves, grass clippings, or debris accumulate around the pump housing – the motor needs cooling air to maintain its ultra-quiet operation.

🔹 Match to Filter Size: Pair your pump with an appropriately-sized filter. An undersized filter creates excessive back pressure; an oversized filter may not clean effectively at lower flow rates.

🔹 Monitor Your Electricity Costs: Consider your local electricity rates when setting run times. Many areas offer lower rates during off-peak hours – program your timer accordingly.

🔹 Pre-Season Check: Before each season, manually rotate the shaft before applying power. A seized shaft from extended storage needs attention before electrical startup.

🔹 Use the Right Pipe Size: While 1.5″ is the minimum, using 2″ pipes with appropriate reducers at the pump can improve flow and reduce strain on the motor.

🔹 Keep Documentation: Store your warranty information, proof of purchase, and installation photos together. You’ll thank yourself if you need to make a warranty claim.

📥 Downloads & Documentation

Complete product information and installation guides:

📄 iFlo Pump Product Leaflet (opens in new tab)
Quick-reference product specifications, key features including ultra-quiet operation and simple installation, warranty information (2-year motor, 1-year pump body and seal), and connection specifications (1.5″ suction and delivery).

📄 iFlo Pump Complete Instruction Manual (opens in new tab)
Comprehensive installation guide including electrical requirements, plumbing best practices, startup procedures, troubleshooting flowcharts, maintenance schedules, and safety compliance information. Essential reading before installation – required to maintain warranty coverage.

💡 Recommendation: Download and save both documents before beginning installation. Share the instruction manual with your electrician to ensure compliance with all electrical safety requirements. Keep these documents with your warranty information.

🏆 Why the Plastica iFlo Pump Stands Out

In a market crowded with overpriced pool pumps that promise performance but deliver frustration, the Plastica iFlo takes a refreshingly different approach. This pump proves that exceptional reliability doesn’t require an exceptional price tag.

Real Value

When we say the iFlo costs less than half the price of comparable pumps, we’re not talking about a flimsy budget option. This is a genuinely well-engineered pump that simply eliminates the markup you’d pay for heavily-advertised brand names. The comprehensive warranty (2 years on the motor!) backs up the quality promise.

Proven in the Field

The virtually zero failure rate isn’t marketing speak – it’s earned through thousands of installations in real-world conditions. Pool professionals choose the iFlo when they need dependable performance without callbacks. The extended motor warranty demonstrates the manufacturer’s confidence.

Smart Engineering

Every design choice serves a purpose:

• The oversized strainer basket means less frequent maintenance
• The self-priming impeller means faster startups
• The air-cooled motor means longer life
• The thermal protection means safeguarded operation
• The ultra-quiet design means peaceful pool enjoyment
• The standard 1.5″ connections mean simple installation

Nothing complicated, nothing gimmicky – just thoughtful engineering that works.

Right-Sized for Real Pools

This isn’t an industrial pump pretending to be residential, nor a toy pump trying to handle serious workloads. At 1HP/0.75kW, it’s perfectly calibrated for above-ground and small in-ground pools – the installations most UK homeowners actually have.

Installation Friendly

The simple 1.5″ connections work with standard pool plumbing. No need for special adapters, unusual fittings, or complicated pipe configurations. Install it once, properly, and it’ll run reliably for years.

Peace and Quiet

The ultra-quiet operation sets the iFlo apart from noisy competitors. Enjoy your garden without the constant drone of a loud pump. Run it during the evening without disturbing outdoor dining or conversation.

The Bottom Line

If you’re tired of pool pumps that either cost a fortune or fail within a season, the Plastica iFlo offers a genuine third option: affordable reliability. It won’t break the bank when you buy it, and it won’t break your schedule with constant repairs and replacements.

The numbers speak for themselves:

• ✅ Less than half the price of comparable pumps
• ✅ Virtually zero failure rate
• ✅ 2-year motor warranty (double many competitors)
• ✅ Ultra-quiet operation
• ✅ Simple installation with standard 1.5″ connections

For pool owners who want crystal-clear water without the maintenance headaches or the premium price tag, the iFlo 1HP pump delivers exactly what you need – and nothing you don’t.