Transform Your Hot Tub Experience with the Balboa GL2001 + TS-ML700 Control System

As a dedicated hot tub enthusiast and parts supplier, I’m thrilled to introduce you to the Balboa GL2001 control pack paired with the TS-ML700 topside control. This advanced system is designed to bring a new level of sophistication and control to your hot tub, whether you’re upgrading an existing setup or outfitting a new installation.

Cutting-Edge M7 Technology for Simplified Operation

The Balboa GL2001 + TS-ML700 system showcases the latest in hot tub control technology. Featuring innovative M7 technology, this system eliminates the need for complex external sensors and flow switches. All the magic happens inside the control box with just two sensors, simplifying your setup and maintenance while ensuring optimal performance.

Intuitive and Feature-Rich User Interface

The TS-ML700 topside control is your gateway to a truly personalized hot tub experience. Its large, hi-tech display screen offers a wealth of features designed to enhance your control and enjoyment:

Key Features:

• Customizable filter time settings
• Built-in clock function for accurate time display
• Detailed error reporting for easy troubleshooting
• Component symbols for at-a-glance system status

Versatile Performance for Various Hot Tub Configurations

This system is engineered to cater to a wide range of hot tub setups:

• Support for two main pumps with additional options
• Pump 1: Single or dual speed, with optional circulation pump functionality
• Pump 2: Single or dual speed
• Third output for either a single-speed pump or air blower
• 3KW heater for precise water temperature control
• Ozone-ready for enhanced water purification
• Flexible lighting options: 12-volt or 230-volt compatibility
• Radio and TV/AV point available for entertainment integration

Specifications Table

Feature	Specification
Power	230VAC, 50Hz, 16A or 32A
Pump 1	Single or dual speed with optional circulation pump
Pump 2	Single or dual speed
Pump 3 or Blower	Single speed
Heater	1 x 3KW
Ozone	1 port
Light	1 x 12 volt or 230 volt
Control Box Dimensions	390mm x 120mm x 300mm
Topside Dimensions	248mm x 79mm
Topside Controls	Time, Mode/Prog, Warm, Cool, Light, Blower, Jets 1, Jets 2

Documentation

• GL2001

Flexible Installation and Compatibility

The Balboa GL2001 + TS-ML700 system is designed for easy integration into a variety of hot tub setups:

• Compatible with any retrofit system
• Ideal for upgrades to existing hot tubs
• 2-inch socket heater union sleeves for secure connections
• Amp cables that plug directly into the PCB for straightforward component operation

Comprehensive Package

The system includes the Balboa GL2001 Mach 3 control box and the Balboa ML700 topside control, providing you with the core components needed to revolutionize your hot tub’s operation. While cables are not included, this allows for customization based on your specific hot tub configuration and installation requirements.

Alternative Part Numbers

Complete GL2001 Mach 3 system: 55216-04
3.0 kW heater: 58118
Printed circuit board only : 53975-04
Expansion card only : 53311

Keypad with overlay: 52649-02
Keypad without overlay: 52798, 50563

Enhanced User Experience

With its large hi-tech display screen, the TS-ML700 topside control offers an unparalleled user experience. You’ll enjoy:

• Easy-to-read information at a glance
• Intuitive control over all hot tub functions
• Real-time status updates and error reporting
• Personalized settings for filter cycles and operation modes

Upgrade your hot tub today with the Balboa GL2001 + TS-ML700 control system. This powerful combination of advanced technology and user-friendly design will elevate your hot tub from a simple spa to a sophisticated relaxation center. Experience the pinnacle of hot tub control and enjoy a new level of comfort and convenience in your personal oasis.

 

 

Hot Tub Wiring – Configuring a Balboa BP7 Spa Control 4.0kW Spa Pack

If you are using a basic setup, and by basic I mean a regular dual speed hot tub pump with a single speed blower, out of the box, your Balboa pack is likely to work without any additional configuration. However, if you are not using a separate circulation pump, the chances are you will need to “configure” the pack using the details below.

On the underside of the Spa Pack covers, you will see a circuit diagram that looks something like this.

Firstly, you need to work through the setup table at the bottom on the left hand side and work out which setup number you need. For example, a 2 speed pump and a single speed blower will need setup #12.

Next, you need to change the DIP switch settings to match your setup. Once you have the right combination of DIP switches, using the topside control you should do the following to change the pack’s setup mode to #12.

To go into the low levels follow the following steps please.

1. Turn tub off.
2. DIP switch 1 move to ON.
3. Turn tub on
4. On the top side control, Press “WARM” twice
5. Press “LIGHT”
6. Press “WARM”
7. Then use “WARM” to move down to the low levels until you get on the set up number you need.
8. Turn off tub
9. DIP switch one back to OFF
10. Turn on tub

Getting the right setup and config is important for the pack to function correctly and the buttons on the top side to do what you expect them to.

 

Balboa DIP Switches Explained

Most of the Balboa Spa Packs have a set of DIP switches that can seem a little confusing in the setup. In the most basic form, you are telling the Spa Pack how many pumps or blowers you have connected and how many it should allow to run before it turns off the heater (or let them all run at once). The reason for this is if you are limiting the amount of current the pack can draw. You are also telling the pack wither you need additional cool down times if you are using an gas/propane/ASHP additional heater. This to stop the kettling effect you can get in the heaters.

Check the circuit diagram that is on the inside of your Balboa pack and do not just copy the settings I explain below as they may be in a different order. The “logic” behind them is the same so just check what each of the DIP switches says it does.

Fixed-fuction DIP Switches 

A1 Test Mode (normally Off). 

A2 In “ON” position, add one high-speed pump (or blower) with Heater. (If you have 1 pump and NO blower use this)

A3 In “ON” position, add two high-speed pumps (or 1 HS Pump and Blower) with Heater. (If you have a pump and a blower use this)

A4 In “ON” position, add four high-speed pumps (or 3 HS Pumps and Blower) with Heater. (If you have two or three pumps and a blower use this)

You should only enable one of the A2, A3 or A4. You can use them in combinations, but it is easier just to use one.

A5 In “ON” position, enables Special Amperage Rule B.  In “OFF” position, enables Special Amperage Rule A. 

Special Amperage Rule A No Limitation (if you are not sure, set it to this. Worst case, your electric will trip if you don’t have enough current available)

Special Amperage Rule B 2 High Speed Pump Maximum, in Setups 1 – 9 1 High Speed Pump Maximum, and also Blower turns off with 1 High Speed Pump, in Setups 10 – 18 (avoid this if you can)

A6 Persistent memory reset (Used when the spa is powering up to restore factory settings as determined by software configuration). 

A2, A3, and A4 work in combination to determine the number of high-speed devices and blowers that can run before the heat is disabled. i.e. A2 and A3 in the ON position and A4 in the OFF position will allow the heater to operate with up to 3 high‑speed pumps (or two HS Pumps and Blower) running at the same time. Heat is disabled when the fourth high-speed pump or blower is turned on. 

Note: A2/A3/A4 all off = No heat with any high-speed pump or blower. 

Assignable DIP Switches 

A7 In “ON” position, enables a 5-minute cooldown for some gas heaters (Cooling Time B). In “OFF” position, enables a 1-minute cooldown for electric heaters (Cooling Time A). 

 

Who are Balboa Water Group?

Balboa Water Group is a prominent manufacturer and supplier of innovative spa and hot tub components. With a rich history spanning several decades, Balboa Water Group has established itself as a leading brand in the industry, known for its cutting-edge technology, quality craftsmanship, and exceptional customer service.

Balboa Water Group specializes in designing and manufacturing spa control systems, which serve as the brains behind the operation of hot tubs and spas. These control systems include a control panel, circuit board, and other components that regulate various functions, such as temperature control, water flow, jet activation, and lighting.

One of the key strengths of Balboa Water Group is their dedication to innovation. They continuously strive to develop new and advanced technologies that enhance the spa experience for users. From user-friendly interfaces and touchscreens to wireless connectivity and smartphone apps, Balboa control systems offer convenient and intuitive control over every aspect of the spa.

Balboa Water Group also places a strong emphasis on safety and energy efficiency. Their control systems often feature built-in safety mechanisms, such as high-limit sensors and automatic shutdowns, to protect users from potential hazards. Additionally, they incorporate energy-saving features that optimize power consumption, helping to reduce operating costs and environmental impact.

In addition to control systems, Balboa Water Group offers a comprehensive range of spa components and accessories. These include pumps, heaters, filters, jets, valves, and more. Their products are known for their durability, reliability, and compatibility with various hot tub models and brands.

Customer satisfaction is a top priority for Balboa Water Group. They provide excellent technical support, troubleshooting assistance, and product documentation to help spa owners and industry professionals make the most of their products. Balboa also collaborates closely with spa manufacturers and distributors worldwide, ensuring that their components are widely available and supported.

Balboa Water Group's commitment to quality and innovation has earned them a stellar reputation within the spa industry. Whether you are a hot tub owner, a spa designer, or a service professional, choosing Balboa products can provide you with the confidence and reliability you need to create a superior spa experience.

Overall, Balboa Water Group is a trusted and respected name in the spa industry, known for its technologically advanced spa components, commitment to customer satisfaction, and ongoing pursuit of innovation. Their products and solutions continue to elevate the spa experience for users around the world.