Revolutionize Your Hot Tub Experience with the Balboa GS520DZ + TS-VL801 Control System

As a dedicated hot tub enthusiast and parts supplier, I’m thrilled to introduce you to the Balboa GS520DZ control pack paired with the TS-VL801 topside control. This powerful combination is designed to transform your hot tub into a state-of-the-art relaxation oasis.

Cutting-Edge Technology for Ultimate Control

The Balboa GS520DZ + TS-VL801 system represents the pinnacle of hot tub control technology. With its advanced M7 technology, this system eliminates the need for complicated sensor and flow switch installations in your tub. Everything is seamlessly managed within the control box by two highly efficient sensors, simplifying your setup and maintenance.

Intuitive User Interface

The TS-VL801 topside control isn’t just a control panel – it’s your gateway to a personalized hot tub experience. Its large, easy-to-read screen provides detailed information about your hot tub’s operation, complete with symbols that indicate which components are currently running.

Key Features:

• Built-in clock for precise time display
• Customizable filter cycle settings
• Real-time status updates on hot tub operations
• Clear visibility of active filter cycles

Versatile Performance

This system is designed to cater to a wide range of hot tub configurations:

• Support for up to two pumps (single or dual speed)
• Optional circulation pump functionality
• Air blower compatibility
• 3KW heater for optimal water temperature control
• Ozone-ready for enhanced water purification
• 12-volt light connection for ambiance
• Radio and TV/AV point available for entertainment options

Flexible Installation

Whether you’re upgrading an existing system or installing in a new hot tub, the Balboa GS520DZ + TS-VL801 is designed for compatibility and ease of use:

• Suitable for any retrofit system
• 2-inch socket heater union sleeves for secure connections
• Amp cables that plug directly onto the PCB for straightforward component operation

Specifications Table

Feature	Specification
Power	230VAC, 50Hz, 16A or 32A
Pump 1	Single or dual speed
Pump 2	Single or dual speed
Air Blower	Optional
Heater	1 x 3KW
Ozone	1 port
Light	1 x 12 volt
Control Box Dimensions	500mm (inc. heater), 320mm (box only) x 270mm
Topside Dimensions	187mm x 83mm
Topside Controls	Time, Mode, Warm, Cool, Blower, Light, Jets 1, Jets 2

Expandability and Customization

The J17 port on this system offers exciting possibilities for customization. You have the flexibility to connect either an air blower for luxurious bubble massages or an additional single-speed pump for enhanced water circulation. This port is protected by a 10-amp quick-blow fuse, ensuring safe operation no matter which option you choose.

Easy Integration

Integrating this system into your hot tub setup is a breeze. The package includes the Balboa GS520DZ control box and the Balboa VL801D topside control, giving you everything you need to get started. While cables are not included, this allows you to customize your installation to your specific hot tub configuration.

Upgrade your hot tub experience today with the Balboa GS520DZ + TS-VL801 control system. It’s more than just a control pack – it’s your ticket to a new level of relaxation and enjoyment in your personal spa oasis.

 

 

Hot Tub Wiring – Configuring a Balboa BP7 Spa Control 4.0kW Spa Pack

If you are using a basic setup, and by basic I mean a regular dual speed hot tub pump with a single speed blower, out of the box, your Balboa pack is likely to work without any additional configuration. However, if you are not using a separate circulation pump, the chances are you will need to “configure” the pack using the details below.

On the underside of the Spa Pack covers, you will see a circuit diagram that looks something like this.

Firstly, you need to work through the setup table at the bottom on the left hand side and work out which setup number you need. For example, a 2 speed pump and a single speed blower will need setup #12.

Next, you need to change the DIP switch settings to match your setup. Once you have the right combination of DIP switches, using the topside control you should do the following to change the pack’s setup mode to #12.

To go into the low levels follow the following steps please.

1. Turn tub off.
2. DIP switch 1 move to ON.
3. Turn tub on
4. On the top side control, Press “WARM” twice
5. Press “LIGHT”
6. Press “WARM”
7. Then use “WARM” to move down to the low levels until you get on the set up number you need.
8. Turn off tub
9. DIP switch one back to OFF
10. Turn on tub

Getting the right setup and config is important for the pack to function correctly and the buttons on the top side to do what you expect them to.

 

Balboa DIP Switches Explained

Most of the Balboa Spa Packs have a set of DIP switches that can seem a little confusing in the setup. In the most basic form, you are telling the Spa Pack how many pumps or blowers you have connected and how many it should allow to run before it turns off the heater (or let them all run at once). The reason for this is if you are limiting the amount of current the pack can draw. You are also telling the pack wither you need additional cool down times if you are using an gas/propane/ASHP additional heater. This to stop the kettling effect you can get in the heaters.

Check the circuit diagram that is on the inside of your Balboa pack and do not just copy the settings I explain below as they may be in a different order. The “logic” behind them is the same so just check what each of the DIP switches says it does.

Fixed-fuction DIP Switches 

A1 Test Mode (normally Off). 

A2 In “ON” position, add one high-speed pump (or blower) with Heater. (If you have 1 pump and NO blower use this)

A3 In “ON” position, add two high-speed pumps (or 1 HS Pump and Blower) with Heater. (If you have a pump and a blower use this)

A4 In “ON” position, add four high-speed pumps (or 3 HS Pumps and Blower) with Heater. (If you have two or three pumps and a blower use this)

You should only enable one of the A2, A3 or A4. You can use them in combinations, but it is easier just to use one.

A5 In “ON” position, enables Special Amperage Rule B.  In “OFF” position, enables Special Amperage Rule A. 

Special Amperage Rule A No Limitation (if you are not sure, set it to this. Worst case, your electric will trip if you don’t have enough current available)

Special Amperage Rule B 2 High Speed Pump Maximum, in Setups 1 – 9 1 High Speed Pump Maximum, and also Blower turns off with 1 High Speed Pump, in Setups 10 – 18 (avoid this if you can)

A6 Persistent memory reset (Used when the spa is powering up to restore factory settings as determined by software configuration). 

A2, A3, and A4 work in combination to determine the number of high-speed devices and blowers that can run before the heat is disabled. i.e. A2 and A3 in the ON position and A4 in the OFF position will allow the heater to operate with up to 3 high‑speed pumps (or two HS Pumps and Blower) running at the same time. Heat is disabled when the fourth high-speed pump or blower is turned on. 

Note: A2/A3/A4 all off = No heat with any high-speed pump or blower. 

Assignable DIP Switches 

A7 In “ON” position, enables a 5-minute cooldown for some gas heaters (Cooling Time B). In “OFF” position, enables a 1-minute cooldown for electric heaters (Cooling Time A). 

 

Who are Balboa Water Group?

Balboa Water Group is a prominent manufacturer and supplier of innovative spa and hot tub components. With a rich history spanning several decades, Balboa Water Group has established itself as a leading brand in the industry, known for its cutting-edge technology, quality craftsmanship, and exceptional customer service.

Balboa Water Group specializes in designing and manufacturing spa control systems, which serve as the brains behind the operation of hot tubs and spas. These control systems include a control panel, circuit board, and other components that regulate various functions, such as temperature control, water flow, jet activation, and lighting.

One of the key strengths of Balboa Water Group is their dedication to innovation. They continuously strive to develop new and advanced technologies that enhance the spa experience for users. From user-friendly interfaces and touchscreens to wireless connectivity and smartphone apps, Balboa control systems offer convenient and intuitive control over every aspect of the spa.

Balboa Water Group also places a strong emphasis on safety and energy efficiency. Their control systems often feature built-in safety mechanisms, such as high-limit sensors and automatic shutdowns, to protect users from potential hazards. Additionally, they incorporate energy-saving features that optimize power consumption, helping to reduce operating costs and environmental impact.

In addition to control systems, Balboa Water Group offers a comprehensive range of spa components and accessories. These include pumps, heaters, filters, jets, valves, and more. Their products are known for their durability, reliability, and compatibility with various hot tub models and brands.

Customer satisfaction is a top priority for Balboa Water Group. They provide excellent technical support, troubleshooting assistance, and product documentation to help spa owners and industry professionals make the most of their products. Balboa also collaborates closely with spa manufacturers and distributors worldwide, ensuring that their components are widely available and supported.

Balboa Water Group's commitment to quality and innovation has earned them a stellar reputation within the spa industry. Whether you are a hot tub owner, a spa designer, or a service professional, choosing Balboa products can provide you with the confidence and reliability you need to create a superior spa experience.

Overall, Balboa Water Group is a trusted and respected name in the spa industry, known for its technologically advanced spa components, commitment to customer satisfaction, and ongoing pursuit of innovation. Their products and solutions continue to elevate the spa experience for users around the world.