Elevate Your Hot Tub Experience with the Balboa GS100 2.0kW + VL401 Touch Pad

Product Overview

I’m thrilled to introduce you to the Balboa GS100 2.0kW Control Pack paired with the VL401 touch pad – a combination that promises to transform your hot tub experience. As someone who’s passionate about providing top-notch hot tub solutions, I can confidently say this setup offers the perfect blend of performance, efficiency, and user-friendly control.

The Power of the Balboa GS100 2.0kW Control Pack

At the heart of this system lies the Balboa GS100 control box, a marvel of modern hot tub technology. This control pack is designed to deliver reliable performance while offering the versatility needed for both new installations and upgrades to existing systems.

Key Features:

1. Efficient Heating: The included 2.0kW heater ensures your hot tub reaches and maintains the perfect temperature with minimal energy consumption.
2. Dual Speed Pump Control: Manage water flow and jet pressure with precision, balancing power and energy efficiency.
3. M7 Technology: Advanced internal sensors eliminate the need for external sensors and flow switches, simplifying installation and maintenance.
4. Versatile Compatibility: Designed to work seamlessly with a wide range of hot tub setups, making it perfect for retrofits and upgrades.
5. Compact Design: With its space-saving dimensions, it fits perfectly into various hot tub configurations.

VL401 Touch Pad: Intuitive Control at Your Fingertips

The Balboa VL401 touch pad is your gateway to a personalized hot tub experience. Its sleek design and intuitive interface put you in complete control of your relaxation.

Touch Pad Features:

• Four-Button Layout: JETS, LIGHT, COOL, and WARM buttons for easy operation
• Digital Display: Clear, easy-to-read temperature and status information
• Waterproof Design: Built to withstand the hot tub environment
• Sleek Aesthetics: Enhances the look of your hot tub with its modern design

Perfect for Entry-Level Systems

With its 2.0kW heating capacity, this system is an excellent choice for entry-level setups or for those looking to optimize their energy usage. The heater draws only around 8.5 amps, potentially allowing for operation from a standard domestic 13amp supply when properly configured.

Installation and Compatibility

This control pack is designed for straightforward integration into your hot tub system. It’s compatible with 1.5-inch socket heater union sleeves, and the amp cables plug directly onto the PCB for easy component operation. However, I always recommend consulting with a qualified electrician to ensure proper setup and electrical safety.

Specifications Table

Feature	Specification
Control Box Model	Balboa GS100 (New Version)
Topside Control	Balboa VL401 Touch Pad
Voltage	230VAC
Frequency	50Hz
Amperage	16A
Heater Power	2.0kW
Pump Control	Dual speed pump 1
Ozone Capability	1 x 230VAC
Light Output	1 x 12V
Control Box Dimensions	215mm (L) x 73mm (W) x 133mm (H)
Touch Pad Dimensions	160mm x 57mm
Heater Length (with unions)	375mm
Touch Pad Functions	JETS, LIGHT, COOL, WARM

Documentation

• Balboa GS100 tech sheet
• gs100 operation guide
• VL series
• cutout template

What’s Included in the Pack

• 1 x Balboa GS100 Control System (new style)
• 1 x Balboa VL405 Touch Panel
• 1 x 2.0kW Heater
• 1 x Wire Grommit

M7 Technology: Simplified Installation and Operation

The advanced M7 technology integrated into this system means you don’t need external sensors or flow switches. Everything is handled inside the control box by two internal sensors, simplifying installation and reducing potential points of failure.

Alternative Part Numbers

Balboa 2 kW : 58350
Balboa 3 kW : 58351
Wellis 3 kW : ACM0713
Dream Maker Spas : 405011

Keypad with overlay: 54094
Keypad without overlay: 52424
Wellis : ACM0367

A Note on Customization

If you prefer a three-button topside control (Jets, Temp & Light), you’ll need to order this separately. The part number for this alternative topside is OL-40131.

Cables and Additional Components

Please note that connecting cables are not included with this package. This allows you the flexibility to choose the appropriate cable lengths for your specific setup, ensuring a clean and efficient installation.

By choosing the Balboa GS100 2.0kW Control Pack with VL401 touch pad, you’re investing in a reliable, efficient, and user-friendly solution for your hot tub. It’s the perfect way to enhance your relaxation experience and ensure your hot tub runs smoothly for years to come. Remember, while this system is designed for easy integration, always consult with a qualified electrician for installation to ensure safety and optimal performance.

 

Hot Tub Wiring – Configuring a Balboa BP7 Spa Control 4.0kW Spa Pack

If you are using a basic setup, and by basic I mean a regular dual speed hot tub pump with a single speed blower, out of the box, your Balboa pack is likely to work without any additional configuration. However, if you are not using a separate circulation pump, the chances are you will need to “configure” the pack using the details below.

On the underside of the Spa Pack covers, you will see a circuit diagram that looks something like this.

Firstly, you need to work through the setup table at the bottom on the left hand side and work out which setup number you need. For example, a 2 speed pump and a single speed blower will need setup #12.

Next, you need to change the DIP switch settings to match your setup. Once you have the right combination of DIP switches, using the topside control you should do the following to change the pack’s setup mode to #12.

To go into the low levels follow the following steps please.

1. Turn tub off.
2. DIP switch 1 move to ON.
3. Turn tub on
4. On the top side control, Press “WARM” twice
5. Press “LIGHT”
6. Press “WARM”
7. Then use “WARM” to move down to the low levels until you get on the set up number you need.
8. Turn off tub
9. DIP switch one back to OFF
10. Turn on tub

Getting the right setup and config is important for the pack to function correctly and the buttons on the top side to do what you expect them to.

 

Balboa DIP Switches Explained

Most of the Balboa Spa Packs have a set of DIP switches that can seem a little confusing in the setup. In the most basic form, you are telling the Spa Pack how many pumps or blowers you have connected and how many it should allow to run before it turns off the heater (or let them all run at once). The reason for this is if you are limiting the amount of current the pack can draw. You are also telling the pack wither you need additional cool down times if you are using an gas/propane/ASHP additional heater. This to stop the kettling effect you can get in the heaters.

Check the circuit diagram that is on the inside of your Balboa pack and do not just copy the settings I explain below as they may be in a different order. The “logic” behind them is the same so just check what each of the DIP switches says it does.

Fixed-fuction DIP Switches 

A1 Test Mode (normally Off). 

A2 In “ON” position, add one high-speed pump (or blower) with Heater. (If you have 1 pump and NO blower use this)

A3 In “ON” position, add two high-speed pumps (or 1 HS Pump and Blower) with Heater. (If you have a pump and a blower use this)

A4 In “ON” position, add four high-speed pumps (or 3 HS Pumps and Blower) with Heater. (If you have two or three pumps and a blower use this)

You should only enable one of the A2, A3 or A4. You can use them in combinations, but it is easier just to use one.

A5 In “ON” position, enables Special Amperage Rule B.  In “OFF” position, enables Special Amperage Rule A. 

Special Amperage Rule A No Limitation (if you are not sure, set it to this. Worst case, your electric will trip if you don’t have enough current available)

Special Amperage Rule B 2 High Speed Pump Maximum, in Setups 1 – 9 1 High Speed Pump Maximum, and also Blower turns off with 1 High Speed Pump, in Setups 10 – 18 (avoid this if you can)

A6 Persistent memory reset (Used when the spa is powering up to restore factory settings as determined by software configuration). 

A2, A3, and A4 work in combination to determine the number of high-speed devices and blowers that can run before the heat is disabled. i.e. A2 and A3 in the ON position and A4 in the OFF position will allow the heater to operate with up to 3 high‑speed pumps (or two HS Pumps and Blower) running at the same time. Heat is disabled when the fourth high-speed pump or blower is turned on. 

Note: A2/A3/A4 all off = No heat with any high-speed pump or blower. 

Assignable DIP Switches 

A7 In “ON” position, enables a 5-minute cooldown for some gas heaters (Cooling Time B). In “OFF” position, enables a 1-minute cooldown for electric heaters (Cooling Time A). 

 

Who are Balboa Water Group?

Balboa Water Group is a prominent manufacturer and supplier of innovative spa and hot tub components. With a rich history spanning several decades, Balboa Water Group has established itself as a leading brand in the industry, known for its cutting-edge technology, quality craftsmanship, and exceptional customer service.

Balboa Water Group specializes in designing and manufacturing spa control systems, which serve as the brains behind the operation of hot tubs and spas. These control systems include a control panel, circuit board, and other components that regulate various functions, such as temperature control, water flow, jet activation, and lighting.

One of the key strengths of Balboa Water Group is their dedication to innovation. They continuously strive to develop new and advanced technologies that enhance the spa experience for users. From user-friendly interfaces and touchscreens to wireless connectivity and smartphone apps, Balboa control systems offer convenient and intuitive control over every aspect of the spa.

Balboa Water Group also places a strong emphasis on safety and energy efficiency. Their control systems often feature built-in safety mechanisms, such as high-limit sensors and automatic shutdowns, to protect users from potential hazards. Additionally, they incorporate energy-saving features that optimize power consumption, helping to reduce operating costs and environmental impact.

In addition to control systems, Balboa Water Group offers a comprehensive range of spa components and accessories. These include pumps, heaters, filters, jets, valves, and more. Their products are known for their durability, reliability, and compatibility with various hot tub models and brands.

Customer satisfaction is a top priority for Balboa Water Group. They provide excellent technical support, troubleshooting assistance, and product documentation to help spa owners and industry professionals make the most of their products. Balboa also collaborates closely with spa manufacturers and distributors worldwide, ensuring that their components are widely available and supported.

Balboa Water Group's commitment to quality and innovation has earned them a stellar reputation within the spa industry. Whether you are a hot tub owner, a spa designer, or a service professional, choosing Balboa products can provide you with the confidence and reliability you need to create a superior spa experience.

Overall, Balboa Water Group is a trusted and respected name in the spa industry, known for its technologically advanced spa components, commitment to customer satisfaction, and ongoing pursuit of innovation. Their products and solutions continue to elevate the spa experience for users around the world.