💪 Balboa HA440NG Spa Pump – 1.5HP Single Speed

Reliable single-speed performance for powerful hydrotherapy jet applications

📋 Product Overview

The Balboa HA440NG 1.5HP Single Speed Spa Pump represents the ultimate benchmark in design, flexibility and performance from HydroAir, a division of Balboa Water Group. This powerful jet pump delivers the specific performance features you require and the long service life spa owners demand.

Engineered for demanding spa applications from zone seating and focused therapy up to multi-pump configurations running several jetted systems, the HA440NG supplies exceptional hydraulic performance with flow rates exceeding 34 m³/h at 2900 RPM. The single-speed operation provides consistent, powerful jet massage whenever activated.

Built with carbon ceramic seals featuring Viton® elastomers for long-lasting performance, this pump easily endures prolonged heat and chemical exposure. VDE approved according to European norms EN60335-1 and EN60335-2-41, the HA440NG is a direct replacement for older HA440 Magnaflow models and is commonly found in Spaform hot tubs. Offering performance comparable to the previous 2HP HA440 model, this efficient 1.5HP pump delivers exceptional power.

✨ Key Features

✅ 1.5HP Single Speed Motor – 1.3 kW power output delivering consistent jet performance at 2900 RPM

✅ High Flow Rate – Exceeds 34 m³/h for maximum performance in luxury spa applications

✅ Carbon Ceramic Seals – Premium seals with Viton® elastomers resist heat and chemical degradation

✅ Class F Insulation – High-temperature motor insulation for reliable operation in hot spa environments

✅ TEFC Motor – Totally Enclosed Fan Cooled motor with IPX5 water protection rating

✅ Multi-Directional Volute – Flexible mounting with centre suction and radial side discharge

✅ 2-Inch Ports – Standard 2″ suction and discharge ports with multiple union options available

✅ VDE/CE/GS Certified – Approved to European safety standards EN60335-1 and EN60335-2-41

✅ Pre-Wired with AMP Plug – Includes 3-metre cable with AMP connector for plug-and-play installation

✅ Dual Drain Connections – Centre suction with 2 drain connections for complete pump drainage

✅ Made in the USA – Quality manufacturing from Balboa Water Group

⚙️ Technical Specifications

Specification	Value
Pump Type	Jet Pump (Massage) – Single Speed
Manufacturer	HydroAir (Balboa Water Group)
Model	HA440NG
Motor Power	1.5 HP
Power Output	1.3 kW
Speed Settings	Single Speed
Voltage	230 V
Frequency	50 Hz
Amperage	5.6 A
Motor Speed	2900 RPM
Flow Rate (Max)	>34 m³/h
Motor Type	TEFC (Totally Enclosed Fan Cooled)
Motor Insulation	Class F
Water Protection	IPX5
Discharge Port	2 inch
Suction Port	2 inch
Port Position	Centre Suction / Side Discharge
Dimension (A)	394 mm
Dimension (B)	67 mm
Dimension (C)	109 mm
Dimension (D)	102 mm
Dimension (E)	124 mm
Dimension (F)	197 mm
Dimension (G)	168 mm
Dimension (H)	94 mm
Seal Type	Carbon Ceramic with Viton® Elastomers
Cable Length	3 metres
Cable Connector	3-Core AMP Plug
Certifications	VDE, CSA, CE/GS
Material Number	1023063

⚡ Electrical Requirements

Electrical Specification	Requirement
Supply Voltage	230 V
Frequency	50 Hz
Power Output	1.3 kW
Full Load Amps	5.6 A
Motor Speed	2900 RPM
Motor Type	TEFC (IPX5)
Motor Insulation	Class F
Cable Supplied	3m with 3-core AMP plug
Wiring	3-wire connection (Live, Neutral, Earth)

⚠️ IMPORTANT ELECTRICAL SAFETY:

All electrical work must be carried out by a qualified electrician in accordance with UK wiring regulations (BS 7671). Hot tubs require RCD protection (30mA). Ensure proper earthing and bonding of all electrical components. VDE approval applies to the pump without cable.

🔗 Compatibility Guide

This Pump Specifications:

📍 Model: HA440NG 📍 Material Number: 1023063 📍 Suction Port: 2 inch (Centre) 📍 Discharge Port: 2 inch (Side) 📍 Speed Control: Single speed (always on when powered) 📍 Cable: 3m with 3-core AMP plug

Direct Replacement For:

• HA440 Magnaflow pumps (single speed models)
• Older 2HP HA440 models (offers comparable performance at 1.5HP)

Commonly Found In:

• Spaform hot tubs
• Other spa systems using HA440 series pumps

Union Options Available Separately:

• 2″ Female Socket Union – Material No: 2614029
• 63mm Female Socket Union – Material No: 2614020
• 2.5″ Female Socket Union – Material No: 2614030

Vibration Mount:

• Anti-Vibration Mount – Material No: 1216001

🔧 Installation Requirements

Pump Dimensions (mm):

Reference	Dimension	Description
A	394 mm	Overall length
B	67 mm	Port centre to mounting
C	109 mm	Wet end height
D	102 mm	Mounting hole spacing
E	124 mm	Mounting hole spacing
F	197 mm	Motor diameter
G	168 mm	Overall width
H	94 mm	Mounting height

Note: D & E represent centre line of mounting holes

Plumbing Connections:

Connection	Size
Suction	2 inch (Centre)
Discharge	2 inch (Side/Radial)

Installation Notes:

⚠️ Pump must be installed below water level (flooded suction) to ensure proper priming

⚠️ Never run the pump dry – this causes seal damage

⚠️ Ensure proper electrical bonding to earth

⚠️ Use anti-vibration mounts (Material No: 1216001) to reduce noise transmission

⚠️ Single-speed pump runs at full power when activated – no speed control required

💡 Multi-directional volute mountings provide flexibility to accommodate any configuration

💡 The pump is supplied with centre suction and 2 drain connections to ensure total drainage

🛠️ Maintenance Guide

Routine Maintenance:

Task	Frequency	Notes
Check for leaks	Monthly	Inspect around seal plate and union connections
Inspect unions	Monthly	Tighten if necessary, check O-rings
Clean strainer/filter	As needed	Remove debris to maintain flow
Check amperage draw	Annually	Should read approximately 5.6A
Inspect motor vents	Quarterly	Keep cooling fins clear of debris
Check mounting bolts	Quarterly	Tighten if vibration has loosened

Warning Signs – Consider Replacement If:

• Unusual noise (grinding, screeching, or humming)
• Water leaking from the seal plate area
• Motor trips the circuit breaker repeatedly
• Noticeably reduced water flow to jets
• Motor overheating or hot to touch
• Visible corrosion or damage to motor housing

Seal Replacement Information:

📍 Seal Type: Carbon Ceramic with Viton® Elastomers

⚠️ Replace the mechanical seal at the first sign of leakage to prevent motor damage

🎯 Ideal Applications

Application	Suitability	Notes
♨️ Hot Tub Jet Pump	Yes	Powerful single-speed jet performance
♨️ Zone Seating Therapy	Yes	Ideal for focused therapy applications
♨️ Multi-Pump Configurations	Yes	Suitable for several jetted systems
♨️ Spaform Hot Tubs	Yes	Direct replacement for OEM pumps
♨️ Dedicated Jet Pump	Yes	Use with separate circulation pump
🛁 Whirlpool Bath	Yes	Suitable for whirlpool applications

❓ Frequently Asked Questions

Q: What horsepower is this pump? A: This is a 1.5HP single-speed jet pump delivering 1.3 kW of power at 2900 RPM.

Q: How does this compare to the older 2HP HA440 model? A: The HA440NG 1.5HP offers performance comparable to the previous 2HP HA440 model whilst being more energy efficient.

Q: What is the difference between single-speed and dual-speed? A: Single-speed pumps run at full power whenever activated, ideal for dedicated jet applications. Dual-speed pumps offer high speed for jets and low speed for filtration/heating cycles.

Q: What voltage does this pump require? A: 230V / 50Hz. All electrical installation must be carried out by a qualified electrician in accordance with BS 7671.

Q: Does the pump come with a cable? A: Yes, the pump is supplied with a 3-metre cable and 3-core AMP plug, ready for spa pack or plug-and-play connection.

Q: What flow rate does this pump deliver? A: The pump delivers flow rates exceeding 34 m³/h for maximum performance in luxury applications.

Q: What size are the plumbing connections? A: Both suction and discharge ports are 2 inch. Unions are sold separately with options for 2″, 63mm, and 2.5″ connections.

Q: Can the wet end be rotated? A: Yes, multi-directional volute mountings provide the flexibility to accommodate any plumbing configuration.

Q: What certifications does this pump have? A: The pump is VDE, CSA, and CE/GS certified, approved according to European norms EN60335-1 and EN60335-2-41.

Q: What type of seals does this pump use? A: All seals are carbon ceramic with Viton® elastomers for long-lasting performance, easily enduring prolonged heat and chemical exposure.

Q: How do I know if my pump needs replacing? A: Common signs include unusual noises, water leaking from the seal, reduced jet pressure, or the motor tripping the breaker repeatedly.

Q: Should I choose single-speed or dual-speed? A: Choose single-speed if you have a separate circulation pump for filtration. Choose dual-speed if you need one pump for both jets (high) and filtration/heating (low).

📥 Downloads & Resources

📄 HA440NG Technical Datasheet – Complete manufacturer specifications and performance curves

🏆 Why Choose the Balboa HA440NG 1.5HP Single Speed

✅ Proven Reliability – Ultimate benchmark in design, flexibility and performance from Balboa Water Group

✅ High Flow Rate – Exceeds 34 m³/h for powerful jet performance

✅ Consistent Power – Single-speed operation delivers full power every time

✅ Premium Seals – Carbon ceramic with Viton® elastomers for long-lasting performance

✅ European Certified – VDE, CSA, CE/GS approved to EN60335-1 and EN60335-2-41

✅ Plug-and-Play Ready – Pre-wired with 3m cable and AMP connector

✅ Flexible Installation – Multi-directional volute and multiple union options

✅ Made in USA – Quality manufacturing from Balboa Water Group

🤝 Why Buy From Parts4Tubs

✅ UK-based company with expert local support

✅ Fast UK delivery options available

✅ Knowledgeable advice from spa industry specialists

✅ Competitive pricing on genuine Balboa products

✅ Full warranty support

✅ Replacement seals, unions, and accessories in stock

✅ Easy returns within 30 days

✨ Summary

The Balboa HA440NG 1.5HP Single Speed Spa Pump (Material No: 1023063) delivers the ultimate benchmark in design, flexibility and performance from HydroAir/Balboa Water Group. Producing 1.3 kW / 5.6A at 2900 RPM, this single-speed jet pump provides flow rates exceeding 34 m³/h for powerful hydrotherapy. Built with carbon ceramic seals with Viton® elastomers, Class F insulation, and TEFC IPX5 motor protection, the HA440NG offers VDE/CE/GS certified reliability. Features 2-inch centre suction and side discharge ports with multiple union options. Pre-wired with a 3-metre 3-core AMP cable for easy installation. Direct replacement for HA440 Magnaflow pumps, commonly found in Spaform hot tubs. Offers performance comparable to the previous 2HP model.

The hot tub industry doesnt make it easy for you when you are trying to match up the size of the unions (the part that screws your pipe work onto the pumps) Below you can see the physical sizes of the collars, and how they relate to the actual union size you need. So a measurement of 2.5", edge to edge on the collar of the pump is actually a 1.5" union - confusing - absolutely! If you are not sure, give me a shout!

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.
2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)
3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.
4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.
5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.
6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.
7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.
8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.
9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.
10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.
11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.
12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.
13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.
14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.
15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.
2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.
3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.
4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.
5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.