💧 Mr. Light Salt Chlorinator – Smart Inverter Pool Sanitisation for Pools up to 70m³

Experience crystal-clear pool water with revolutionary 1g/L low-salt technology and intelligent Wi-Fi control

🌊 Product Overview

Say goodbye to complicated pool chemistry and hello to effortless, eco-friendly pool care. The Mr. Light Salt Chlorinator represents the next generation of pool sanitisation – an intelligent, inverter-driven system that automatically generates chlorine from salt whilst keeping your water perfectly balanced.

What makes Mr. Light truly revolutionary? Its ultra-low 1g/L salt requirement – that’s three times less salt than conventional systems. Less salt means less corrosion to your pool equipment, a softer feel on your skin, and a more sustainable approach to pool ownership.

The heart of the system is InverPure Technology – a smart algorithm that continuously monitors your water quality through ORP, pH, and temperature sensors, then automatically adjusts chlorine production to maintain perfect swimming conditions. Whether it’s a scorching summer day with heavy pool use or a quiet midweek morning, Mr. Light adapts in real-time to deliver exactly what your pool needs.

The intuitive OvalPad touchscreen gives you instant water quality feedback through colour-coded LED indicators – blue means perfect, orange means attention needed, red means action required. It’s pool chemistry made simple, even for first-time pool owners.

And with the InverGo smartphone app, you’re always connected to your pool. Check water quality, adjust settings, or activate Turbo mode from anywhere – whether you’re at work, on holiday, or simply relaxing indoors.

✨ Key Features

✅ Revolutionary 1g/L Low-Salt Technology – Operates at just 1g/L salinity – three times lower than conventional systems. Enjoy softer water, reduced equipment corrosion, and lower running costs

✅ InverPure Smart Automation – Intelligent inverter algorithm continuously monitors and adjusts chlorine production, responding instantly to changing pool conditions

✅ 120% Hyper Disinfection Mode – Automatic power boost when water quality drops. Perfect recovery after pool parties, heavy rain, or returning from holiday

✅ Built-in pH Regulation – Integrated peristaltic dosing pump automatically maintains optimal pH balance – no more manual acid dosing

✅ OvalPad Touch Control – Elegant, intuitive touchscreen with colour-coded LED water quality indicators. See your pool’s health at a glance

✅ Wi-Fi App Control – Full remote monitoring and control through the InverGo smartphone app. Your pool in your pocket

✅ Real-Time Sensor Monitoring – ORP, pH, temperature, and salinity readings displayed live on screen and app

✅ Self-Cleaning Cell Technology – Automatic polarity reversal every 2-6 hours prevents scale build-up and extends electrode life to an impressive 12,000 hours

✅ Intelligent Salinity Detection – Built-in sensor monitors salt levels with ±500 PPM accuracy and alerts you when top-up is needed

✅ IP65 Weatherproof Design – Control unit fully protected for outdoor installation in all weather conditions

✅ Automatic Winter Protection – Smart temperature sensing reduces operation in cold weather and pauses completely below 5°C to protect your investment

✅ Flexible Plumbing Options – Compatible with 63mm, 60.3mm, 50mm, and 48.3mm pipework for easy integration

🔧 Technical Specifications

Specification	Value
Model	Mr. Light (MLS23)
Maximum Pool Volume	70 m³ (at 1000 PPM, water temp ≤28°C)
Chlorine Production (100%)	19.0 g/h (at 1000 PPM)
Chlorine Production (120% Hyper Mode)	23.0 g/h (at 1000 PPM)
Chlorine Production (120% at 3000 PPM)	36.0 g/h
Operating Salt Level	1-2 g/L (1000-2000 PPM)
Power Supply	220-240V AC, 50/60Hz
Maximum Power Consumption	202 W
Maximum DC Output Voltage	12V DC
IP Rating	IP65 (Weatherproof)
Cell Lifetime	Up to 12,000 hours
Self-Cleaning Cycle Options	2, 4, or 6 hours (default 4h)
Control Unit Dimensions (L×W×H)	305 × 200 × 75 mm
Water Connection Options	63 / 60.3 / 50 / 48.3 mm
Advised Water Flow Rate	5-28 m³/h
Operating Water Temperature	5°C to 40°C
Operating Ambient Temperature	-7°C to 42°C
Maximum Operating Pressure	3 Bar
Gross Weight	9.5 kg
Package Dimensions (L×W×H)	550 × 400 × 300 mm

⚡ Electrical Requirements

Electrical Specification	Requirement
Supply Voltage	220-240V AC
Frequency	50/60 Hz
Phase	Single Phase
Maximum Power	202 W
IP Rating	IP65
Relay Output	Normally open (for external pump control)
Communications	MODBUS RS485 / Wi-Fi / Dry Contact
Auxiliary Outputs	VS Pumps + 2 configurable auxiliary relays

⚠️ IMPORTANT SAFETY NOTICE:

All electrical installation must be carried out by a qualified 
electrician in accordance with UK wiring regulations (BS 7671).

The device must be powered via an isolating transformer or 
residual current device (RCD) with nominal operating residual 
current not exceeding 30mA.

Never use an extension cable - connect directly to a wall socket.

💧 Water Chemistry Guide

Achieve perfect pool water by maintaining these parameters:

Parameter	Recommended Level	Why It Matters
Salt Concentration	1.0-2.0 g/L	Provides chlorine generation feedstock
Free Chlorine	1.0-3.0 ppm	Sanitises and kills bacteria
pH Level	7.2-7.6	Optimises chlorine effectiveness
Cyanuric Acid (Stabiliser)	20-30 ppm max	Protects chlorine from UV (outdoor only)
Total Alkalinity	80-120 ppm	Buffers pH fluctuations
Water Hardness	200-300 ppm	Prevents equipment corrosion
Metals	0 ppm	Prevents staining

💡 Getting Started: Add 1-2 kg of salt per cubic metre of pool water. Run filtration for 24 hours to fully dissolve before activating the chlorinator.

📱 Smart Control & Connectivity

OvalPad Touchscreen – Water Quality at a Glance

The elegant OvalPad display makes monitoring your pool effortless:

LED Colour	Status	Action Required
🔵 Blue	Perfect water quality	Relax and enjoy!
🟠 Orange	Approaching setpoints	Monitor closely
🔴 Red	Needs attention	System working to restore balance

On-Screen Information:

• Real-time ORP value (oxidation-reduction potential)
• Current pH reading
• Water temperature
• Salt concentration
• Chlorine production percentage
• Timer status
• Error notifications

InverGo Smartphone App – Your Pool in Your Pocket

Download the free InverGo app and unlock complete remote control:

📊 Monitor – View real-time ORP, pH, temperature, and salinity readings

🎛️ Control – Adjust chlorine production and pH setpoints remotely

⚡ Boost – Activate Turbo mode before guests arrive

⏰ Schedule – Set filtration timers from anywhere

📈 Review – Check logs and historical data

👨‍👩‍👧‍👦 Share – Grant access to family members

🔄 Update – Receive automatic firmware improvements via OTA

Available on: Apple App Store & Google Play

🔄 Intelligent Operating Modes

Inverter Mode (Automatic)

The system continuously monitors ORP levels and automatically adjusts chlorine production:

Production Level	When It’s Used
0-40%	Light pool usage, ideal conditions
0-100%	Standard automatic adjustment
0-120%	Hyper disinfection when ORP drops significantly

Manual Mode

Take direct control with user-defined chlorine production (0-100% in 5% increments) and pH dosing volume settings.

🚀 Turbo Mode – Rapid Recovery

One-tap activation delivers 24-hour boost at 120% production. Perfect for:

• ✅ Post-party pool recovery
• ✅ After heavy rainfall
• ✅ Returning from holiday
• ✅ Algae treatment support
• ✅ Before guests arrive

❄️ Winter Mode (Automatic)

Smart temperature protection activates automatically:

Water Temperature	System Response
Above 10°C	Normal operation
5-10°C	Production capped at 20%
Below 5°C	Electrolysis paused (equipment protection)

🏠 Pool Cover Mode

When a pool cover is detected, production automatically reduces to 20% – preventing over-chlorination and saving energy.

🛠️ Installation Overview

Positioning Requirements

Requirement	Specification
Location	Dry, well-ventilated area
Mounting	Wall-mounted control unit
Sunlight	Avoid direct exposure (install shade if needed)
Clearance	Adequate space for maintenance access

Plumbing Integration

Connection Point	Options Available
Pipe Sizes	63mm, 60.3mm, 50mm, or 48.3mm
Cell Position	After filter, before heater
Isolation Valves	Required either side of cell
Flow Direction	Follow marked arrows on cell

Included Sensors & Components

• ✅ ORP Probe (BNC connection)
• ✅ pH Probe (BNC connection)
• ✅ Temperature Sensor (integrated)
• ✅ Flow Switch
• ✅ Built-in pH Dosing Pump

🔧 Maintenance Made Simple

Routine Care Schedule

Task	Frequency	What to Do
Check salt level	Monthly	Maintain 1000-2000 PPM, top up as needed
Clean pH probe	Every 6 months	Wash in mild detergent, rinse thoroughly
Clean ORP probe	Every 6 months	Rinse in distilled water
Calibrate all probes	Start of each season	Use pH 7.0, pH 10.0, and ORP 468mV buffer solutions
Inspect cell	Monthly	Check for scale build-up (self-cleaning reduces this)
Check acid tank	Weekly	Replenish hydrochloric acid (≤12.5%) as needed

Cell Cleaning (When Required)

1. Turn off chlorinator and filtration pump
2. Close isolation valves either side of cell
3. Disconnect power at isolating switch
4. Remove cell and place upside down
5. Fill with cleaning solution (1 part hydrochloric acid : 9 parts water)
6. Leave for 15 minutes to dissolve scale
7. Dispose of solution responsibly (not into drains)
8. Rinse thoroughly with clean water
9. Reinstall, open valves, and restart system

Winterising Options

Active Winterising (filtration continues):

• System automatically manages production based on temperature
• No user intervention required

Passive Winterising (pool drained/covered):

• Remove ORP and pH probes
• Store in probe caps with storage solution
• Keep at 5-30°C
• Never allow probes to dry out

⚠️ Error Codes & Solutions

Code	Meaning	What to Do
A1	Acid Tank Low/Empty	Replenish acid tank, check dosing tubes for leaks
A2	Salt Level Low	Add salt to reach 1000-2000 PPM
A3	No Water Flow	Check pump is running, valves are open
E1	Power Supply Issue	Verify cell connections, check for damage
E2	pH Target Not Reached	Clean and calibrate pH probe, test with separate kit
E4	Control Unit Overheating	Improve ventilation, install shade cover
E5	Low Water Temperature	Winter mode active – normal operation
E6	Air Detected in Cell	Check pump operation, bleed air from system
E7	pH Sensor Failure	Restart unit, contact support if persists
E8	ORP Sensor Failure	Restart unit, contact support if persists
E9	Power Module Failure	Restart unit, contact support if persists
Eb	Salinity Module Failure	Restart unit, contact support if persists

🎯 Ideal Applications

Application	Suitability	Notes
🏊 Residential Outdoor Pools	✅ Excellent	Designed for pools up to 70m³
🏊 Indoor Swimming Pools	✅ Excellent	Use 0 PPM cyanuric acid stabiliser
🏊 Above Ground Pools	✅ Good	Verify pool volume is within range
🏊 Fibreglass Pools	✅ Excellent	Low salt gentle on all surfaces
🏊 Vinyl Liner Pools	✅ Excellent	Reduced chemical handling protects liner
🏊 Concrete/Tiled Pools	✅ Excellent	Self-cleaning cell prevents scaling

💡 Hot Climate Note: For water temperatures consistently above 28°C, reduce maximum pool volume by 25-40%.

❓ Frequently Asked Questions

Q: What size pool is this chlorinator suitable for? A: The Mr. Light is designed for pools up to 70 cubic metres under standard conditions (1000 PPM salt, water temperature ≤28°C). In consistently hot climates, we recommend reducing the maximum pool size by 25-40% for optimal performance.

Q: How much salt do I need to add to my pool? A: Add 1-2 kg of high-quality pool salt per cubic metre of water to achieve the recommended 1-2 g/L concentration. For a 50m³ pool, that’s 50-100 kg of salt. Always allow 24 hours with filtration running for complete dissolution before activating the chlorinator.

Q: Why is 1g/L salt better than traditional 3-4g/L systems? A: Lower salt concentration means softer-feeling water that’s gentler on skin and eyes, significantly reduced corrosion to pool equipment and surroundings, lower ongoing salt costs, and a more environmentally sustainable approach – all whilst delivering identical sanitisation performance.

Q: Does the system control pH automatically? A: Yes! The Mr. Light includes a built-in peristaltic pH dosing pump that automatically adds acid when pH rises above your setpoint. You’ll need to supply hydrochloric acid (≤12.5% concentration) and refill the tank as needed.

Q: Can I really control my pool from my phone? A: Absolutely. The free InverGo app (iOS and Android) connects via Wi-Fi and gives you full monitoring and control from anywhere in the world. Check water quality, adjust settings, activate Turbo mode, and receive alerts – all from your smartphone.

Q: How long does the electrolytic cell last? A: With proper maintenance and the automatic self-cleaning function, the cell is designed to deliver up to 12,000 hours of operation. That’s many years of trouble-free service for typical residential use.

Q: What happens to my pool in winter? A: The Mr. Light automatically protects itself and your pool. When water drops below 10°C, production reduces to 20%. Below 5°C, electrolysis pauses completely. The system resumes normal operation automatically when temperatures rise.

Q: What electrical supply do I need? A: Standard UK 220-240V AC, 50/60Hz single phase supply. Maximum power consumption is just 202W – similar to a few light bulbs. Installation must be completed by a qualified electrician with RCD protection (30mA maximum).

Q: Is professional installation required? A: Whilst technically competent pool owners may self-install, we strongly recommend professional installation to ensure correct plumbing integration, proper electrical connection, and optimal sensor positioning.

📥 Downloads & Resources

📄 Product Brochure – Technical overview and features

📄 Installation Manual – Complete installation and operating instructions (33 pages)

📄 Installation Guide Sheet – Quick reference installation guide

📱 InverGo App – Free download on Apple App Store and Google Play

🏆 Why Choose Mr. Light Salt Chlorinator

Benefit	What It Means For You
🌿 Ultra-Low 1g/L Salt	Softer water, less corrosion, lower running costs
🧠 InverPure Intelligence	Set it and forget it – automatic perfect water balance
📱 Wi-Fi Connected	Monitor and control your pool from anywhere
⚡ 120% Hyper Mode	Rapid recovery after parties, rain, or holidays
🔄 Self-Cleaning Cell	12,000 hour lifespan with minimal maintenance
🌡️ Smart Winter Protection	Automatic equipment protection in cold weather
💧 Built-in pH Control	Complete water management in one system
🛡️ IP65 Weatherproof	Designed for outdoor UK conditions
🇬🇧 UK Distribution	Certikin support and local availability

🤝 Why Buy from Parts4Tubs

✅ UK-Based Expertise – Local support from pool and spa specialists who understand your needs

✅ Fast UK Delivery – Quick dispatch to get your equipment installed sooner

✅ Technical Advice – Our knowledgeable team can answer your installation and compatibility questions

✅ Competitive Pricing – Great value on professional-grade pool equipment

✅ Full Product Support – We stand behind every product we sell

✅ Comprehensive Range – Your one-stop shop for all pool and spa equipment needs

✨ Summary

Transform your pool maintenance experience with the Mr. Light Salt Chlorinator. This intelligent system delivers automated chlorine generation and pH control for pools up to 70 cubic metres, using revolutionary 1g/L low-salt technology that’s gentler on your pool, your skin, and the environment.

With InverPure smart automation, the system continuously monitors ORP, pH, and temperature to maintain perfect water balance automatically. The 120% Hyper Disinfection mode ensures rapid recovery after heavy use, whilst Wi-Fi connectivity via the InverGo app puts complete control in your pocket.

Built to last with a 12,000-hour self-cleaning cell, IP65 weatherproof construction, and automatic winter protection, the Mr. Light represents the future of effortless pool ownership.

Order today and discover what crystal-clear, perfectly balanced pool water feels like.