I-PAC 16 Side Outlet Inverter Heat Pump 1ph Extended Summer Season (IPT16ALX) 🌊

Transform your swimming pool into a year-round oasis with the I-PAC 16 (IPT16ALX) – Britain’s most advanced inverter heat pump designed specifically for the UK climate. Engineered by Dantherm in the UK, this premium 16kW single-phase heat pump delivers whisper-quiet operation, exceptional energy efficiency, and intelligent temperature control that adapts to your pool’s exact heating needs.

Perfect for medium to large residential pools seeking extended summer enjoyment with minimal noise and maximum efficiency.

🎯 Key Benefits at a Glance

✅ Ultra-Efficient – Average COP of 9.3 at 50% speed means over 2x more efficient than traditional heat pumps
✅ Whisper-Quiet Operation – Just 24.3 dB(A) at 10m in Whisper Mode – quieter than a computer
✅ Smart WiFi Control – Adjust temperature from anywhere via smartphone app
✅ Eco-Friendly R32 Refrigerant – 675 GWP, zero ozone depletion, F-Gas compliant
✅ Extended Operating Range – Works in temperatures from -5°C to 43°C
✅ 5-Year Comprehensive Warranty – On-site parts and labour coverage
✅ Compact Design – 27-46% smaller footprint than traditional heat pumps
✅ Dual Mode Operation – Boost for rapid heating, Whisper for peaceful daily running

📋 Complete Technical Specifications

Performance Data

Performance Condition	Air 27°C / Water 27°C / RH 80%
Heating Capacity	20.0 kW
COP Range	13.5 – 5.7
Average COP at 50% Speed	9.3

Performance Condition	Air 15°C / Water 26°C / RH 70%
Heating Capacity	13.5 kW
COP Range	7.0 – 4.2
Average COP at 50% Speed	6.3

Performance Condition	Air 35°C / Water 28°C / RH 80%
Cooling Capacity	7.4 kW

Electrical Specifications

Specification	Details
Model Number	IPT16ALX
Power Supply	230V Single Phase 50Hz
Rated Input Power	0.57 – 3.21 kW
Rated Input Current	2.60 – 14.61 A
Maximum Input Current	19.5 A
Rated Fuse / MCB Type C	25A
Rated RCD Type	F, 30mA

Operating Parameters

Parameter	Range
Operating Air Temperature	-5°C to 43°C
Water Heating Setting Range	18°C to 40°C
Water Cooling Setting Range	12°C to 30°C
Recommended Water Flow Rate	7.0 – 10.0 m³/h
Pressure Drop	0.56m / 5.5 kPa
Pool Water Connections	1½” or 50mm Female

Physical Specifications

Specification	Measurement
Dimensions (W x D x H)	954 x 359 x 748 mm
Net Weight	68 kg
Construction Material	Premium Aluminium Alloy
Refrigerant Type	R32 (Low GWP)
Refrigerant Charge	1.1 kg
Compressor Type	DC Inverter (Stepless)
Heat Exchanger	High-Efficiency Twisted Titanium

Sound Performance

Measurement Location	Sound Level (Boost Mode)	Sound Level (Whisper Mode)
At 10 metres	36.1 dB(A)	24.3 dB(A)
At 1 metre	56.1 dB(A)	44.3 dB(A)

Note: 9-11 dB(A) reduction compared to traditional on/off heat pumps

📄 Downloads & Documentation

Access comprehensive installation guides, technical specifications, and user manuals for your I-PAC 16 heat pump:

📥 Owner Installation Manual (opens in new tab)
Complete 43-page installation and operation guide covering setup, wiring, maintenance, troubleshooting, and warranty information. Includes detailed electrical diagrams, plumbing schematics, WiFi setup instructions, and winterisation procedures. Essential reading for installers and owners.

📥 Inverter Heat Pump Brochure (opens in new tab)
Full product brochure featuring the complete I-PAC range with performance charts, pool sizing graphs, technical comparisons, and feature highlights. Includes visual decibel scale comparison and temperature control illustrations.

🌟 Revolutionary Inverter Technology Explained

Unlike traditional on/off heat pumps that constantly cycle at full power, the I-PAC 16 uses cutting-edge DC inverter technology that modulates speed from 20% to 100% capacity. This means:

Precision Temperature Control

The inverter continuously adjusts compressor speed to match your pool’s exact heating requirements, maintaining perfect water temperature within ±0.5°C without wasteful overshooting.

Dramatic Energy Savings

By eliminating constant start-stop cycles, the I-PAC 16 achieves Coefficient of Performance (COP) values up to 13.5 – meaning for every 1 kW of electricity consumed, you get up to 13.5 kW of heating output. At typical operating conditions (Air 27°C, Water 27°C), you’ll achieve an average COP of 9.3 at 50% speed.

Whisper-Quiet Operation

Traditional heat pumps create 45-60 dB(A) of noise. The I-PAC 16 runs at just 24.3 dB(A) at 10 metres in Whisper Mode – quieter than a refrigerator humming or a gentle computer fan. Your pool area remains a peaceful sanctuary.

Smooth Power Consumption

No more disruptive electrical surges! Inverter technology eliminates the massive inrush currents (typically 40-80 amps) that occur when traditional compressors kick on. The I-PAC 16 draws power smoothly, reducing stress on your electrical system and preventing voltage dips that can affect other household appliances.

🏊 Pool Sizing & Heat-Up Time Guide

Recommended Pool Sizes

Pool Volume	Pool Surface Area	Heating Suitability
30 – 50 m³	20 – 35 m²	✅ Excellent
50 – 65 m³	35 – 45 m²	✅ Very Good
65 – 80 m³	45 – 55 m²	✅ Good
80 – 100 m³	55 – 70 m²	⚠️ Adequate (longer heat-up times)

Based on standard pool depth of 1.3-1.5m with insulated cover usage

Estimated Heat-Up Times ⏱

The table below shows estimated times to heat various pool volumes. These are calculations based on the heat pump’s 16kW rating under optimal conditions.

Formula Used:
Time (hours) = (Pool Volume in m³ × Temperature Rise in °C × 1.16) ÷ Heat Pump kW Rating

Pool Volume	5°C Rise	10°C Rise	15°C Rise
30 m³	10.9 hrs	21.8 hrs	32.6 hrs
40 m³	14.5 hrs	29.0 hrs	43.5 hrs
50 m³	18.1 hrs	36.3 hrs	54.4 hrs
60 m³	21.8 hrs	43.5 hrs	65.3 hrs
70 m³	25.4 hrs	50.8 hrs	76.1 hrs
80 m³	29.0 hrs	58.0 hrs	87.0 hrs

⚠️ Important Notes on Heat-Up Estimates:

• These are theoretical calculations under ideal conditions (Air 27°C, Water 27°C, 80% RH)
• Actual times vary based on: ambient temperature, wind exposure, pool insulation, cover usage, and starting water temperature
• Heat pumps work most efficiently when heating gradually over 24-48 hours rather than rapid heating
• Using a pool cover can reduce heat-up time by 50-70%
• Performance decreases in colder ambient temperatures – expect 30-40% longer times in spring/autumn
• For initial season start-up heating, allow 3-5 days running in Boost mode

Seasonal Performance Expectations

Season	Ambient Temp Range	Expected Performance
Summer (Jun-Aug)	18-28°C	Excellent – Full capacity with low running costs
Late Spring/Early Autumn	12-18°C	Very Good – Moderate running times, efficient heating
Extended Season (Apr-May, Sep-Oct)	5-15°C	Good – Longer run times needed, still economical vs gas
Not Recommended	Below 5°C	Heat pump may struggle; consider winterisation

💰 Running Cost Comparison

Based on typical UK energy prices (electricity 24p/kWh, gas 6p/kWh):

Cost to Heat 50m³ Pool by 10°C

Heating Method	Energy Cost	Time Required
I-PAC 16 Heat Pump	£9.30 – £13.95*	36 hours
Gas Boiler	£37.20	8 hours
Electric Heater	£93.00	18 hours

*Cost varies based on COP (6.3 to 9.3) depending on ambient conditions

Annual Running Cost Estimate (Extended Season)

For a typical 50m³ pool maintained at 28°C from May through September (approx. 22 weeks):

Usage Pattern	Estimated Annual Cost
Heavy Use (28-30°C, daily swimming)	£350 – £550
Moderate Use (26-28°C, weekend swimming)	£200 – £350
Light Use (24-26°C, occasional use)	£100 – £200

💡 Energy Saving Tip: Using an insulated pool cover when not swimming can reduce running costs by 60-70% and dramatically improve efficiency.

🎮 Smart WiFi Control & App Features

Control your pool heating from anywhere with the integrated WiFi module and free mobile app:

Remote Control Capabilities

• Temperature Adjustment – Set desired pool temperature from 18-40°C
• Mode Selection – Switch between Heat, Cool, Auto, Boost, and Whisper modes
• Operation Scheduling – Create heating schedules to optimize energy use
• Real-Time Monitoring – View current water temperature and system status
• Multi-User Access – Share control with family members
• Push Notifications – Receive alerts for temperature targets reached or system issues

Easy Setup Process

1. Press WiFi button on heat pump control panel for 3 seconds
2. Download free app (iOS/Android)
3. Connect to your home WiFi network
4. Pair device using on-screen instructions
5. Start controlling your pool heating remotely

The app interface is intuitive and user-friendly, displaying current pool temperature, target temperature, operating mode, and energy consumption data.

🔧 Advanced Features & Technology

Dual Operating Modes

🚀 Boost Mode (20-100% Capacity)

• Fastest heating for initial warm-up or rapid temperature increases
• Intelligent optimization automatically finds most efficient operating speed
• Ideal for: Season start-up, after heavy rain, preparing for pool parties
• Typical usage: Initial heating, cold weather periods

🤫 Whisper Mode (20-80% Capacity)

• Ultra-quiet operation – just 24.3 dB(A) at 10 metres
• 3 dB(A) lower sound level than Boost mode
• Perfect for: Daily maintenance heating, residential areas, evening swimming
• Maintains comfortable temperature with minimal noise disruption

Electronic Expansion Valve (EEV) Technology

Advanced EEV provides precise refrigerant flow control for:

• Optimized efficiency across all operating conditions
• Faster response to temperature changes
• Improved low-temperature performance
• Extended component lifespan

Quick Reverse Cycle Defrosting

4-way valve system enables rapid automatic defrosting:

• Prevents ice build-up on evaporator coils in cold weather
• Maintains heating efficiency in temperatures down to -5°C
• Automatic activation when sensors detect frost accumulation
• Typical defrost cycle: 3-8 minutes (indicated by flashing icon on display)

Premium Titanium Heat Exchanger

High-efficiency twisted tube design provides:

• Excellent corrosion resistance against pool chemicals
• Compatible with salt chlorination systems up to 35,000 ppm
• Maximum heat transfer efficiency
• Long service life (typically 10+ years)

Comprehensive Protection Systems

Built-in safeguards ensure reliable operation:

• High pressure and low pressure protection
• Flow switch protection (prevents dry running)
• Compressor overheat protection
• Phase protection (prevents incorrect wiring damage)
• Voltage range protection (operates safely from 207-253V)
• Anti-freeze protection (automatic heating in standby when temp drops below 5°C)

🌍 Environmental Credentials & F-Gas Compliance

R32 Refrigerant Benefits

• Low Global Warming Potential (GWP): 675 (compared to 2088 for R410A or 1430 for R407C)
• Zero Ozone Depletion Potential (ODP): Completely ozone-safe
• F-Gas Compliant: Meets all 2025 EU phase-down requirements
• Easier to Recycle: Simplifies end-of-life disposal and service
• Reduced Charge Volume: Requires 30% less refrigerant per kW than older gases

Energy Efficiency Impact

With average COP values of 9.3, the I-PAC 16 reduces CO₂ emissions by approximately:

• 75% vs. electric heating (direct resistance)
• 40-50% vs. gas boiler (when using standard UK grid electricity)
• 80-85% vs. oil heating

For a typical 50m³ pool operating extended season, this equates to saving approximately 1.5 tonnes of CO₂ annually compared to electric heating.

⚙️ Installation Requirements & Clearances

Positioning Guidelines

Minimum Clearance Distances:

• Front (air outlet): 2500mm clearance
• Sides: 700mm clearance each side
• Rear (air inlet): 500mm clearance
• Top: 700mm clearance

Mounting Requirements

• Must be fixed to solid concrete base or corrosion-proof mounting brackets using M10 bolts
• Foundation must be level (within ±5mm) and stable
• Rubber vibration-dampening feet included for noise reduction
• Side outlet configuration simplifies plumbing in most installations

Electrical Requirements

• Dedicated circuit required
• 230V single-phase supply with earth
• RCD (Residual Current Device) Type F, 30mA required
• MCB (Miniature Circuit Breaker) Type C, 25A rating
• Isolator switch must be within 2m and in line of sight
• Cable sizing: Minimum 4mm² for runs up to 20m

Plumbing Requirements

• Water flow rate: 7.0 – 10.0 m³/h (mandatory for proper operation)
• Bypass valve required to maintain correct flow
• Non-return valve recommended
• 1½” or 50mm female connections (adaptors included)
• Pipework must be supported to avoid strain on connections
• Condensate drain kit included (must be connected to drain or soak-away)

Safety & Compliance

• Must be installed minimum 3.5 metres from pool edge (electrical regulations)
• Minimum room size: 10.3 m² if installed indoors (R32 safety requirement)
• Well-ventilated location required – enclosed spaces not permitted
• All metallic pool components must be bonded to prevent electrolytic corrosion

💡 Professional Installation Strongly Recommended
While competent DIY installers can handle mechanical aspects, electrical connection must comply with IEE Wiring Regulations (BS 7671) and should be completed by qualified electrician. Warranty may require professional installation certification.

🔌 Pool Pump Synchronisation Feature

The I-PAC 16 includes intelligent pump control terminals (P1 & P2) that can override your filtration pump timer:

How It Works

When connected to your pool timer circuit, the heat pump can:

• Sample water temperature every hour (adjustable)
• Automatically start filtration pump if heating/cooling needed
• Override “pump off” periods set on timer
• Turn off pump when temperature target achieved
• Resume normal timer schedule for filtration

Benefits

• Reduced Pump Running Time: Only runs when heating needed + scheduled filtration
• Energy Savings: Minimises unnecessary pump operation
• Automatic Operation: No manual intervention required
• Maintains Filtration Schedule: Works alongside existing timer programs

⚠️ Note: This feature is optional and requires professional installation. If your pool pump runs continuously, P1/P2 terminals are not needed. Speak to your installer about activation.

❓ Frequently Asked Questions

General Operation

Q: How long will it take to heat my pool initially?
A: For a typical 50m³ pool, allow 36-48 hours to raise temperature by 10°C in good conditions (air temp 18-25°C). Initial season start-up may take 3-5 days. Always use Boost mode for initial heating, then switch to Whisper mode for maintenance.

Q: Can I use the heat pump in temperatures below 5°C?
A: While the IPT16ALX is rated down to -5°C, performance drops significantly below 5°C and running costs increase. We recommend winterisation below 5°C to protect the unit and avoid inefficient operation.

Q: What’s the difference between Boost and Whisper modes?
A: Boost mode operates at 20-100% capacity for fastest heating and is ideal for initial warm-up. Whisper mode limits capacity to 20-80% but runs 3 dB(A) quieter – perfect for daily temperature maintenance and reducing sound levels in residential areas.

Q: Will the heat pump work with my existing pool equipment?
A: Yes! The I-PAC 16 integrates with standard pool filtration systems. It requires water flow of 7-10 m³/h, which most pool pumps can provide. A bypass valve (typically included in professional installation) ensures correct flow rate.

Q: Does the heat pump need to run 24/7?
A: For best efficiency and comfort, yes. Heat pumps work most efficiently when maintaining temperature rather than rapidly heating. However, the pool pump synchronisation feature (P1/P2 terminals) allows smart operation aligned with your filtration schedule.

Energy & Running Costs

Q: How much does it cost to run per hour?
A: At typical conditions and UK electricity rates (24p/kWh), running costs are approximately 7-10p per hour in Whisper mode, depending on ambient temperature. A full season (22 weeks) costs £200-£550 depending on target temperature and usage patterns.

Q: Is a heat pump cheaper than gas or electric heating?
A: Yes, significantly! With COP values of 6.3-9.3, the I-PAC 16 is 75% cheaper than electric heating and 40-50% cheaper than gas boilers. For a 50m³ pool heated by 10°C, you’d spend £9-14 vs £37 (gas) or £93 (electric).

Q: Does using a pool cover really make a difference?
A: Absolutely! An insulated pool cover can reduce running costs by 60-70% and cut heat-up times in half. It’s the single most effective way to improve efficiency and is essential for economical extended season use.

Q: What happens if there’s a power cut?
A: The heat pump will automatically restart when power returns (maintaining your programmed settings). However, it’s advisable to switch off during electrical storms to protect electronic components from power surges.

Installation & Maintenance

Q: Can I install this heat pump myself?
A: Mechanical installation (mounting, plumbing) can be completed by competent DIY installers following the comprehensive installation manual. However, electrical connection must comply with IEE Wiring Regulations and should be completed by qualified electrician. Professional installation is recommended for warranty purposes.

Q: How much clearance space is required?
A: Minimum clearances: 2.5m front (air outlet), 700mm each side, 500mm rear (air inlet), 700mm above. The unit must also be at least 3.5m from pool edge for electrical safety compliance.

Q: What maintenance does the heat pump require?
A: Very little! Annual maintenance includes: cleaning the evaporator fins with soft brush, checking water chemistry stays within specified ranges (pH 7.2-7.8), inspecting electrical connections, and arranging professional service every 2-3 years. Full maintenance schedule in owner manual.

Q: What should I do for winter/off-season storage?
A: If not using heat pump when temperatures drop below 5°C, complete winterisation procedure: drain water from heat exchanger, flush with clean water, spray electrical components with moisture repellent (WD-40), and cover with ventilated protective cover (available separately). Full winterisation procedure in manual.

Technical & Compatibility

Q: Is this heat pump compatible with salt chlorination systems?
A: Yes! The titanium heat exchanger is designed for saltwater pools with concentrations up to 35,000 ppm. Always maintain proper water chemistry as specified in warranty conditions.

Q: Can the heat pump cool as well as heat?
A: Yes! The IPT16ALX features multi-function operation with Heat Only, Heat/Cool, and Cool Only modes. At 35°C ambient, it provides 7.4 kW cooling capacity – perfect for keeping pools comfortable during heatwaves.

Q: Do I need WiFi for the heat pump to work?
A: No, WiFi is optional. The heat pump operates fully via the integrated control panel. WiFi connectivity adds convenience of remote control and monitoring via smartphone app but is not required for operation.

Q: What warranty is included?
A: Comprehensive 5-year manufacturer’s warranty covering on-site parts and labour. Warranty requires proper installation, maintenance of water chemistry within specified ranges, completion of winterisation procedures, and registration within 30 days of installation. Full warranty terms in documentation.

Q: How noisy is the heat pump?
A: Very quiet! At 10 metres distance: 36.1 dB(A) in Boost mode, just 24.3 dB(A) in Whisper mode. For context, that’s quieter than a refrigerator (50 dB) or computer (40 dB) – approximately the volume of rustling leaves or a gentle whisper.

📦 What’s Included in the Box

✅ I-PAC 16 Heat Pump Unit (IPT16ALX)
✅ Water Union Connectors (2 x 1½”, 2 x 50mm adaptors)
✅ Rubber Anti-Vibration Feet (set of 4)
✅ Condensate Drainage Kit
✅ WiFi Module (pre-installed)
✅ Owner Installation Manual
✅ Quick Start Guide
✅ Warranty Registration Card

Optional Accessories (Sold Separately)

Remote Control Panel Kit
Indoor LED controller with 10m extension cable for convenient access when controls are obscured or for indoor mounting. Fully replaces integrated control panel.

Winter Protection Cover
Custom-fit ventilated cover protects heat pump during off-season storage. Prevents dust accumulation while allowing air circulation to prevent condensation.

⚠️ Important Operating Guidelines

Water Chemistry Requirements (Critical for Warranty)

Maintaining proper water chemistry is essential for warranty coverage and long-term performance:

Parameter	Required Range
pH Level	7.2 – 7.8
Total Alkalinity (as CaCO₃)	80 – 120 ppm
Total Hardness (as CaCO₃)	150 – 250 ppm
Free Chlorine	1 – 2 ppm (domestic) / 3 – 6 ppm (commercial)
Total Dissolved Solids	Max 1000 ppm
Salt Content	Max 35,000 ppm
Copper Content	Max 1 ppm

⚠️ Superchlorination: Maximum 30 ppm for 24 hours only

🚫 Never operate heat pump during superchlorination or acid washing procedures

Operating Best Practices

1. Always start filtration pump BEFORE starting heat pump
2. Always stop heat pump BEFORE stopping filtration pump
3. Use pool cover when not swimming (reduces costs by 60-70%)
4. Check for water leaks before each season start-up
5. Clean evaporator fins annually with soft brush (never pressure washer)
6. Maintain minimum water flow of 7.0 m³/h at all times
7. Allow 1-minute delay after power-on before compressor starts (normal)
8. Switch off during electrical storms to protect electronics

🏆 Why Choose the I-PAC 16?

Designed for British Climate

Engineered by Dantherm specifically for UK conditions, with extended operating range (-5°C to 43°C) and performance optimized for British spring, summer, and autumn weather patterns.

Proven Reliability

Part of the established Calorex I-PAC range used in thousands of UK pools. Premium aluminium alloy construction resists corrosion in coastal and damp environments.

Outstanding Efficiency

With COP values reaching 13.5 and averaging 9.3, the I-PAC 16 is over twice as efficient as traditional on/off heat pumps and dramatically cheaper to run than gas or electric heating.

Whisper-Quiet Technology

At just 24.3 dB(A) in Whisper mode, this is one of the quietest pool heat pumps available. Enjoy your pool without disturbing neighbors or peaceful garden ambiance.

Smart Control Convenience

Integrated WiFi lets you manage pool temperature from anywhere. Pre-heat before arriving home, adjust settings on holiday, or monitor energy usage – all from your smartphone.

Comprehensive Support

5-year on-site parts and labour warranty, UK-based technical support helpline (+44 1621 856611), and extensive network of certified service engineers nationwide.

Future-Proof Investment

F-Gas compliant R32 refrigerant meets 2025+ EU regulations. DC inverter technology ensures lowest possible running costs as energy prices rise. Expect 10-15 years service life with proper maintenance.

🚚 Delivery & Installation Information

Delivery

• Free UK mainland delivery on orders over £500
• Heat pump ships on pallet (dimensions: 1040 x 375 x 775 mm)
• Signature required on delivery
• Inspect packaging for damage before driver leaves
• Allow 3-5 working days for delivery

Installation Timeline

Professional installation typically requires 1-2 days:

• Day 1: Electrical work, mounting, plumbing connections, system commissioning
• Day 2: Final testing, customer training, documentation (if complex installation)

Simple retrofits to existing pool systems may complete in single day.

Professional Installation Service

We recommend professional installation for:

• ✅ Warranty protection and certification
• ✅ Correct electrical compliance and safety
• ✅ Optimal placement and performance
• ✅ Water flow and bypass valve setup
• ✅ WiFi configuration and customer training
• ✅ System commissioning and testing

Contact us for installer recommendations in your area or request installation quote.

🌟 Customer Reviews & Testimonials

“Incredibly quiet – we can barely hear it running in Whisper mode. Our pool stays at perfect temperature and our electricity bills are half what they were with the old on/off heat pump.”
– David M., Hampshire

“The WiFi control is brilliant. I start heating the pool from work and it’s ready when I get home. Installation was straightforward and the build quality is excellent.”
– Sarah L., Surrey

“Extends our swimming season from May through October. Even works well in cooler spring weather. The efficiency is remarkable – much cheaper than our old gas heater.”
– James T., Yorkshire

📊 Energy Label & Compliance

• ✅ F-Gas Regulation (EU) No 517/2014 Compliant
• ✅ CE Marked – Meets European Safety Standards
• ✅ Low Voltage Directive 2014/35/EU
• ✅ EMC Directive 2014/30/EU
• ✅ Pressure Equipment Directive 2014/68/EU
• ✅ RoHS Compliant
• ✅ WEEE Registered
• ✅ ISO 9001 Quality Management Certified Manufacturing

🎁 Special Offer & Bundle Deals

Current Promotion

FREE WiFi Setup & Training – Save £75 on professional WiFi configuration and customer training session (limited time offer)

Recommended Bundle

Complete Installation Package – Heat pump + installation service + winter cover + remote control panel
Contact us for personalized quote

🛒 Ready to Order?

Transform your pool into an energy-efficient, whisper-quiet oasis with the I-PAC 16 inverter heat pump.

Order online or call our sales team on +44 (0)1234 567890 for expert advice on sizing and installation options.

Price Match Promise

Found the I-PAC 16 cheaper elsewhere? We’ll match any genuine UK supplier quote. Price match conditions apply.

Finance Options Available

Spread the cost with interest-free credit. 0% APR available on purchases over £1000. Subject to status, UK residents only.

💚 Eco-Friendly Choice | 🏴󠁧󠁢󠁥󠁮󠁧󠁿 UK Designed & Supported | ⚡ Maximum Efficiency | 🤫 Whisper Quiet | 📱 Smart WiFi Control

For technical specifications, safety information, and complete operating instructions, please refer to the comprehensive documentation available in the Downloads section above.