💧 Vian Power VP250 Spa Pump – 2.5 HP Single Speed

High-performance single-speed jet pump for powerful hydrotherapy massage

💦 Product Overview

The Vian Power VP250 is a powerful single-speed massage pump designed for high-performance water circulation in hot tubs and spas. Delivering an impressive 2.5 HP (1.9 kW) output at 2900 RPM, this pump provides exceptional water flow to drive your spa’s massage jets with strong, consistent pressure.

As a dedicated jet pump, the VP250 focuses entirely on delivering maximum performance when you need it most – during your relaxing hydrotherapy sessions. The single-speed design offers simplicity and reliability, with the full 2.5 HP power dedicated to driving massage jets.

With 2-inch plumbing connections and a 3-core cable for electrical connection, the VP250 is designed for straightforward installation in larger spas requiring powerful jet performance.

⭐ Key Features

✅ Powerful 2.5 HP Motor – 1.9 kW output delivers strong, satisfying jet pressure

✅ Single Speed Operation – Dedicated high-speed for maximum jet performance

✅ 2900 RPM – High rotational speed ensures powerful water flow

✅ 8 Amp Current Draw – Efficient power consumption for the performance delivered

✅ 2-Inch Plumbing – Standard connections for easy installation

✅ 3-Core Cable – Plain cable for flexible electrical connection

✅ 40 µF Capacitor – Reliable motor starting

✅ Compact Design – 400 × 205 × 205 mm fits most spa cabinets

🔩 Technical Specifications

Specification	Value
Pump Type	Single-Speed Massage Pump
Motor Power	2.5 HP / 1.9 kW
Speed Settings	Single Speed
Voltage	230 V
Frequency	50 Hz
Amperage	8 A
RPM	2900
Capacitor	40 µF
Plumbing Size	2 inch
Dimensions (L × H × D)	400 × 205 × 205 mm
Cable Type	3-core plain cable

⚡ Electrical Requirements

Electrical Specification	Requirement
Supply Voltage	230 V
Frequency	50 Hz
Phase	Single Phase
Full Load Amps	8 A
Capacitor	40 µF
Cable Configuration	3-core plain cable

⚠️ IMPORTANT ELECTRICAL SAFETY NOTICE:

All electrical work must be carried out by a qualified electrician in accordance with UK wiring regulations (BS 7671). Hot tubs require RCD protection (30mA). The pump must be properly bonded to the spa’s earthing system.

⚙️ Compatibility Guide

This Pump:

📍 Type: Single-Speed Massage Pump
📍 Plumbing: 2 inch
📍 Electrical: 3-core plain cable

Compatible With:

• Spas requiring 2.5 HP single-speed jet pump
• Systems with standard 2″ plumbing connections
• Hot tubs needing dedicated jet/booster pump

Note: This is a single-speed pump for jet operation only. If you need a pump that also handles filtration and heating at low speed, consider the dual-speed VP250-II.

🔌 Installation Requirements

Mounting:

Requirement	Specification
Mounting Position	Horizontal
Base	Solid, level, vibration-dampening surface
Ventilation	Adequate clearance for motor cooling
Access	Sufficient space for maintenance

Plumbing Connections:

Connection	Size
Plumbing Size	2 inch

Electrical Connections:

The VP250 comes with a 3-core plain cable. The three wires are:

• 1 × Live – high speed
• 1 × Neutral
• 1 × Earth

Installation Notes:

⚠️ Pump must be installed below water level or primed before operation
⚠️ Never run pump dry – causes seal and motor damage
⚠️ Ensure proper bonding to earth as per BS 7671 regulations
⚠️ Check all union connections for leaks before powering on

🔧 Maintenance Guide

Routine Maintenance:

Task	Frequency	Notes
Check for leaks	Monthly	Inspect around seal and unions
Inspect unions	Monthly	Hand-tighten if loose
Clean strainer/filter	As needed	Ensure adequate water flow
Check amperage draw	Annually	Should match rated value (8A)
Inspect motor vents	Quarterly	Keep clear of debris
Check mounting bolts	Quarterly	Tighten if loose

Warning Signs – Consider Pump Replacement If:

• Unusual noise (grinding, screeching, or humming)
• Water leaking from seal area
• Motor trips circuit breaker repeatedly
• Noticeably reduced water flow
• Motor runs excessively hot

🛁 Ideal Applications

Application	Suitability	Notes
♨️ Hot tub jet pump	✅ Excellent	High speed powers massage jets
♨️ Spa booster pump	✅ Excellent	Additional pump for extra jet zones
🛁 Whirlpool bath	✅ Good	Suitable for whirlpool systems

Not Suitable For:

• 24-hour circulation duty (use circulation pump instead)
• Filtration cycles (no low-speed option)
• Heating circulation (requires separate circulation pump)

❓ Frequently Asked Questions

Q: What horsepower is this pump?
A: The Vian Power VP250 is rated at 2.5 HP (1.9 kW) single speed.

Q: What is the difference between the VP250 and VP250-II?
A: The VP250 is a single-speed pump running only at high speed for jet operation. The VP250-II is a dual-speed pump that also has a low-speed setting for quiet filtration and heating.

Q: What are the amperage and RPM ratings?
A: The pump draws 8A and runs at 2900 RPM.

Q: What size are the plumbing connections?
A: 2-inch plumbing connections.

Q: What cable does this pump have?
A: 3-core plain cable.

Q: What is the capacitor size?
A: 40 µF.

Q: Will this fit my hot tub?
A: Check your existing pump’s dimensions and port sizes. This pump measures 400 × 205 × 205 mm with 2-inch connections. Contact Parts4Tubs for compatibility assistance.

✅ Why Choose the Vian Power VP250

✅ High Power Output – 2.5 HP for demanding jet systems

✅ Simple & Reliable – Single-speed design with fewer components

✅ Strong Performance – 2900 RPM delivers powerful water flow

✅ Easy Installation – Standard 2″ connections and 3-core cable

✅ Compact Size – Fits standard spa cabinets

✅ Quality Construction – Reliable performance for long service life

🤝 Why Buy From Parts4Tubs

✅ UK-based company with local customer support

✅ Fast UK delivery to minimise spa downtime

✅ Expert advice from spa specialists

✅ Competitive pricing on quality components

✅ Full warranty support for peace of mind

✅ Easy returns within 30 days

♨️ Summary

The Vian Power VP250 is a powerful 2.5 HP (1.9 kW) single-speed massage pump for hot tub and spa applications. Running at 2900 RPM with 8A current draw at 230V/50Hz, this dedicated jet pump delivers strong water flow for satisfying hydrotherapy performance. Featuring 2-inch plumbing connections, 40 µF capacitor, and 3-core plain cable, the VP250 is designed for spas requiring powerful single-speed jet operation. Compact dimensions of 400 × 205 × 205 mm ensure easy fitment. Order today for reliable jet performance.