♨️ Vian Power VP200 Spa Pump – 2.0 HP Single Speed

High-performance single-speed jet pump for powerful hydrotherapy massage

💧 Product Overview

The Vian Power VP200 is a robust single-speed jet pump engineered specifically for hot tub and spa applications. Delivering a powerful 2.0 HP (1.5 kW) output at 2900 RPM, this pump provides exceptional water flow to drive your spa’s massage jets with impressive force and consistency.

Designed as a dedicated jet or booster pump, the VP200 focuses entirely on delivering maximum performance when you need it most – during your relaxing hydrotherapy sessions. The single-speed design offers simplicity and reliability with fewer components to maintain compared to dual-speed alternatives.

Built to the same high standards as the VP200-II, this pump features a 56 frame motor, 2-inch plumbing connections, and comes pre-wired with a 3-metre cable and AMP plug for easy installation. The VP200 is widely used in Chinese-manufactured hot tubs and is compatible with various spa control systems, making it an excellent replacement choice for existing single-speed jet pumps.

⭐ Key Features

✅ Powerful 2.0 HP Motor – 1.5 kW output delivers strong, satisfying jet pressure for effective hydrotherapy

✅ Single Speed Simplicity – Dedicated high-speed operation for maximum jet performance

✅ 2900 RPM Operation – High rotational speed ensures powerful water flow through jets

✅ Industry-Standard Design – Compatible with common spa configurations

✅ 230V/50Hz UK Compatible – Designed for UK electrical supply

✅ 2-Inch Plumbing Connections – Standard 78mm OD male threaded ports

✅ Pre-Wired with AMP Plug – 3-metre, 3-core cable ready for connection

✅ Mechanical Seals – Quality shaft seal for reliable operation

✅ Compact Dimensions – 400 × 205 × 205 mm fits most spa cabinet installations

✅ Robust Construction – Reinforced pump housing with aluminium cooling fins

🔩 Technical Specifications

Specification	Value
Pump Type	Single-Speed Jet/Massage Pump
Motor Power	2.0 HP / 1.5 kW
Speed Settings	Single Speed
Voltage	230 V
Frequency	50 Hz
Amperage	7.0 A
RPM	2900
Capacitor	30 µF
Wet End Configuration	2-inch
Discharge Port	2 inch / 78 mm OD (male threaded)
Suction Port	2 inch / 78 mm OD (male threaded)
Dimensions (L × W × H)	400 × 205 × 205 mm
Cable Length	3 metres
Cable Type	3-core with AMP plug

⚡ Electrical Requirements

Electrical Specification	Requirement
Supply Voltage	230 V
Frequency	50 Hz
Phase	Single Phase
Full Load Amps	7.0 A
Capacitor Rating	30 µF
Thermal Protection	Built-in
Cable Configuration	3-core (Live, Neutral, Earth)

⚠️ IMPORTANT ELECTRICAL SAFETY NOTICE:

All electrical work must be carried out by a qualified electrician in accordance with UK wiring regulations (BS 7671). Hot tubs require RCD protection (30mA). The pump must be properly bonded to the spa’s earthing system.

⚙️ Compatibility Guide

This Pump:

📍 Type: Single-Speed Jet/Booster Pump
📍 Wet End: 2 inch
📍 Discharge: 2 inch (78mm thread OD)
📍 Suction: 2 inch (78mm thread OD)
📍 Electrical: 3-metre, 3-core cable with AMP plug connector

Compatible With:

• Chinese-manufactured hot tubs and spas
• Spas using Balboa control systems
• Hot tubs requiring dedicated jet/booster pump
• Systems with standard 2″ plumbing connections

Can Replace:

• LX LP200 single-speed pumps (verify dimensions before ordering)
• Similar 2HP single-speed pumps with 2″ connections

Note: This is a single-speed pump for jet operation only. If you need a pump that also handles filtration and heating at low speed, consider the dual-speed VP200-II.

🔌 Installation Requirements

Mounting:

Requirement	Specification
Mounting Position	Horizontal (motor shaft horizontal)
Base	Solid, level, vibration-dampening surface
Ventilation	Minimum 50mm clearance around motor for cooling
Access	Minimum 300mm clearance for maintenance access

Plumbing Connections:

Connection	Size
Suction Port	2 inch / 78 mm OD
Discharge Port	2 inch / 78 mm OD
Union Type	Standard spa unions (sold separately if required)

Electrical Connections:

The VP200 comes pre-fitted with a 3-metre, 3-core cable with AMP plug connector. The three wires are:

• 1 × Live (Red, Brown or Black) – high speed
• 1 × Neutral (Blue or White)
• 1 × Earth (Green/Yellow)

If your control system uses a different connector, the cable can be swapped from your existing pump.

Installation Notes:

⚠️ Pump must be installed below water level (flooded suction) or primed before operation
⚠️ Never run pump dry – causes immediate seal and motor damage
⚠️ Ensure proper bonding to earth as per BS 7671 regulations
⚠️ This is a single-speed pump – runs at full power when activated
⚠️ Check all union connections for leaks before powering on

🔧 Maintenance Guide

Routine Maintenance:

Task	Frequency	Notes
Check for leaks	Monthly	Inspect around mechanical seal and unions
Inspect unions	Monthly	Hand-tighten if loose; do not overtighten
Clean strainer/filter	As needed	Ensure adequate water flow to pump
Check amperage draw	Annually	Should match rated value (7.0A)
Inspect motor vents	Quarterly	Keep cooling fins clear of debris
Check mounting bolts	Quarterly	Tighten if loose to prevent vibration

Warning Signs – Consider Pump Replacement If:

• Unusual noise (grinding, screeching, or humming)
• Water leaking from mechanical seal area
• Motor trips circuit breaker repeatedly
• Noticeably reduced water flow or jet pressure
• Motor runs excessively hot
• Pump fails to start or runs intermittently

Mechanical Seal Information:

📍 Seal Location: Between wet end and motor
📍 Seal Type: Mechanical shaft seal
⚠️ Replace seal at first sign of leakage to prevent motor damage

---

🛁 Ideal Applications

Application	Suitability	Notes
♨️ Hot tub jet pump	✅ Excellent	Primary application – dedicated jet power
♨️ Spa booster pump	✅ Excellent	Additional pump for extra jet zones
🛁 Whirlpool bath	✅ Good	Suitable for whirlpool jet systems
💦 Swim spa jets	✅ Good	Can power swim spa jet systems

Not Suitable For:

• 24-hour circulation duty (use circulation pump instead)
• Filtration cycles (no low-speed option)
• Heating circulation (requires separate circulation pump)

❓ Frequently Asked Questions

Q: What is the difference between the VP200 and VP200-II?
A: The VP200 is a single-speed pump running only at high speed for jet operation. The VP200-II is a dual-speed pump that also has a low-speed setting for quiet filtration and heating. Choose VP200 if you have a separate circulation pump, or VP200-II if you need one pump for both jets and circulation.

Q: What horsepower is this pump?
A: The Vian Power VP200 is rated at 2.0 HP (1.5 kW) single speed at 2900 RPM.

Q: Will this pump fit my hot tub?
A: This pump has 2-inch suction and discharge ports (78mm thread OD). Measure your existing pump’s dimensions and port sizes to confirm compatibility. Contact Parts4Tubs for assistance.

Q: What voltage does this pump require?
A: 230V / 50Hz single-phase supply, which is standard UK mains voltage. All electrical installation must be completed by a qualified electrician.

Q: How much power does this pump draw?
A: The VP200 draws 7.0A at full load, consuming 1.5 kW when running.

Q: What size are the ports?
A: Both suction and discharge ports are 2-inch with 78mm outer thread diameter.

Q: Can I use this for filtration?
A: No, this is a single-speed pump designed for jet operation only. For filtration, you need either a separate circulation pump or a dual-speed pump like the VP200-II.

Q: What cable connection does this pump use?
A: The pump comes with a 3-metre, 3-core cable pre-fitted with an AMP plug connector.

✅ Why Choose the Vian Power VP200

✅ Maximum Jet Power – Full 2.0 HP dedicated to driving massage jets

✅ Simple & Reliable – Single-speed design with fewer components to fail

✅ Strong Performance – 2900 RPM delivers powerful, consistent water flow

✅ Easy Installation – Pre-wired with AMP plug and standard 2″ connections

✅ Broad Compatibility – Standard 2″ connections for most spa systems

✅ Quality Construction – Robust motor with upgraded mechanical seals

🤝 Why Buy From Parts4Tubs

✅ UK-based company with local customer support and technical expertise

✅ Fast UK delivery to get your hot tub back up and running quickly

✅ Expert advice from spa specialists who understand your needs

✅ Competitive pricing on genuine quality spa components

✅ Full warranty support for peace of mind

✅ Easy returns within 30 days if you need to exchange

✅ Replacement seals and parts available for ongoing maintenance

♨️ Summary

The Vian Power VP200 is a powerful 2.0 HP (1.5 kW) single-speed jet pump designed for hot tub and spa massage applications. Running at 2900 RPM with 7.0A current draw at 230V/50Hz, this dedicated jet pump delivers strong water flow for satisfying hydrotherapy performance. With 2-inch connections (78mm thread OD) and pre-wired 3-metre cable with AMP plug, the VP200 is an excellent choice for Chinese-manufactured spas requiring a reliable single-speed jet pump. Perfect for spas with separate circulation pumps or as a booster pump for additional jet zones. Order today for powerful, reliable jet performance.