☀️ Sol+Guard 500M 180 GeoBubble Solar Cover – 16ft x 38ft | Maximum Solar Heating for UK Pools

Save Up to £800+ Annually While Heating Your Pool Naturally with the Sun

Bottom Line Up Front: The Sol+Guard 500M 180 GeoBubble cover is the UK’s leading translucent solar pool cover, specifically engineered to maximize solar heating gains while providing exceptional heat retention. Pool owners report annual savings of £500-800+ on heating costs, plus £175+ on water bills and £80+ on chemicals—typically achieving full ROI within 12-18 months.*

*Based on average 16ft x 38ft pool (49.6m²), 6-month swimming season, UK energy rates of £0.28/kWh, water costs of £4.40/m³, and typical usage patterns. Individual results vary based on location, sun exposure, existing heating system, and pool usage. See full methodology in Disclaimers section.

---

🎯 Why Choose Sol+Guard 500M 180 Over Standard Solar Covers?

The Sol+Guard 500M 180 isn’t just another bubble cover—it’s a precision-engineered solar heating system designed specifically for pools in higher UV regions or those requiring maximum solar transmission. Here’s what makes it exceptional:

The Solar Heating Advantage

Translucent UV Transmission Technology: Unlike opaque covers that block sunlight, Sol+Guard’s specialized translucent material allows UV rays to penetrate directly into your pool water, actively heating it throughout the day. In optimal conditions, you can see temperature increases of up to 8°C from solar gains alone.

Enhanced UV Protection (180 kLys/yrs Rating): The “180” designation refers to this cover’s enhanced UV stabilization, rated for areas receiving up to 180 kilolangley years of UV exposure. This makes it ideal for:

• Southern UK regions with higher sun exposure
• Pools in open areas without shade
• Warmer climates requiring extra UV resistance
• Pool owners seeking maximum durability in sunny conditions

500 Micron Professional-Grade Thickness: At 500M, this cover strikes the perfect balance between solar transmission and insulation. It’s thick enough to provide excellent heat retention overnight while remaining translucent enough for maximum daytime solar heating.

---

💰 Your Annual Savings Breakdown (16ft x 38ft Pool)

Let’s translate the technology into real-world financial benefits for this specific size:

Heating Cost Savings: £500-800+ Annually*

Without Sol+Guard 500M 180:

• Average UK pool heating: 4,200-6,000 kWh per 6-month season
• At £0.28/kWh = £1,176-1,680 annual heating cost
• Heat loss from evaporation: Approximately 75% of total heat loss

With Sol+Guard 500M 180:

• Heat loss reduction: Up to 75%
• Solar heating gains: 3-8°C temperature boost
• Combined heating reduction: 40-60% lower energy consumption
• New annual heating cost: £470-840
• Your Savings: £530-840 per year

Water Savings: £175+ Annually*

The Evaporation Crisis: An uncovered 16ft x 38ft pool loses approximately 39,680 litres per year to evaporation—that’s 500+ bathtubs worth of water disappearing into thin air.

Sol+Guard Solution:

• Evaporation reduction: Up to 98%
• Water saved: 38,886 litres annually
• At £4.40 per cubic metre: £171 saved per year
• Bonus: Reduced chemical dilution means fewer top-ups

Chemical Savings: £80-120 Annually*

The Hidden Cost of Evaporation: When water evaporates, it takes your carefully balanced chemicals with it, particularly chlorine which degrades under UV exposure.

Sol+Guard Protection:

• Chemical consumption reduction: Up to 30%
• Chlorine savings: Approximately 5kg per season
• Reduced pH adjusters and stabilizers
• Less frequent water testing required
• Annual chemical savings: £80-120

Total Annual Savings: £785-1,131*

Return on Investment

Cover Cost: £594.84 (inc VAT) Typical ROI Period: 6-9 months of first swimming season 5-Year Total Savings: £3,925-5,655 10-Year Savings Potential: £7,850-11,310

---

🔬 How Sol+Guard 500M 180 Technology Works

The GeoBubble Advantage

Traditional bubble covers use simple round bubbles that create stress points where material is stretched, leading to premature failure. GeoBubble technology revolutionizes this design:

Scientifically Designed Shape: Each bubble features a unique interconnected shape with no stress points, distributing tension evenly across the material. Think of it like the difference between a standard arch and a geodesic dome—the latter distributes weight far more effectively.

25% Longer Lifespan: Independent testing shows GeoBubble covers last 25% longer than traditional bubble covers, extending your investment further.

Superior Insulation: The air trapped in each GeoBubble acts like double-glazing for your pool, creating thousands of tiny insulation pockets that prevent heat from escaping overnight.

Translucent vs. Opaque: Understanding the Difference

Sol+Guard’s Translucent Design:

• Allows UV rays to penetrate water
• Actively heats water during daylight hours
• Best for pools requiring temperature increases
• Ideal for unheated or partially heated pools
• Maximum solar energy capture

Comparison to Opaque Covers (e.g., Energy Guard):

• Block light to prevent algae growth
• Focus on heat retention only
• Better for consistently heated pools with algae issues
• No active solar heating component

The 180 UV Protection System

The UV Map (see technical documentation) shows that different regions receive varying levels of ultraviolet exposure. Standard Sol+Guard (140) is rated for areas receiving up to 140 kLys/yrs, covering most of Northern and Central UK.

Sol+Guard 180 is specifically formulated for:

• Southern England regions
• Coastal areas with intense sun reflection
• Pools in fully exposed locations
• Extended outdoor seasons
• Any area requiring maximum UV durability

This enhanced formulation includes additional UV stabilizers that prevent material degradation, maintaining the cover’s translucency and structural integrity for years longer than standard formulations.

---

📊 Technical Specifications

Specification	Details
Model	Sol+Guard 500M 180 GeoBubble
Dimensions	16ft x 38ft (4.88m x 11.58m)
Coverage Area	49.6 square metres
Material Thickness	500 microns (0.5mm)
UV Rating	180 kLys/yrs (enhanced protection)
Bubble Technology	GeoBubble (patented design)
Material Type	Translucent UV-transmission polymer
Warranty	6-year pro-rata (UK & Ireland)*
Temperature Limit	Maximum pool water 29°C
Chemical Standards	SPATA-compliant levels required
Installation	Bubbles face down into water
Compatibility	Works with pumps, heaters, rollers
Manufacturing	Made to order (bespoke sizes available)

*Warranty void if pool water exceeds 29°C or SPATA chemical/TDS standards not maintained.

---

🌡️ Performance Comparison: Sol+Guard 180 vs. Alternatives

Sol+Guard 180 vs. No Cover

Metric	No Cover	With Sol+Guard 180	Your Benefit
Heat Loss	75% via evaporation	Reduced by 75%	£530-840/year saved
Water Evaporation	39,680L/year	793L/year (98% reduction)	£171/year + 500 baths saved
Solar Heating	0°C gain	+3-8°C gain	Free natural heating
Chemical Life	Standard	30% longer	£80-120/year saved
Debris Entry	Constant	Minimal	Hours saved cleaning

Sol+Guard 180 vs. Standard Solar Covers (400M Blue)

Feature	400M Blue Cover	Sol+Guard 500M 180	Advantage
Thickness	400 microns	500 microns	+25% better insulation
UV Rating	Standard (~100 kLys)	180 kLys/yrs	+80% UV durability
Solar Transmission	Moderate (tinted)	Maximum (translucent)	Up to 2°C more heating
Heat Retention	Good	Excellent	Lower overnight heat loss
Lifespan	3-4 years typical	5-6 years typical	40-50% longer service
Warranty	3 years	6 years pro-rata	Double warranty period
Price Point	Budget	Mid-premium	Better long-term value

Sol+Guard 180 vs. Premium 600M Gold Cover

Feature	600M Gold	Sol+Guard 500M 180	Best Choice For
Primary Function	Heat retention	Solar heating + retention	Those needing temperature increase
Material	Opaque with aluminium	Translucent with UV stabilizers	Pools requiring active heating
Thickness	600 microns	500 microns	Gold: artificially heated pools<br>Sol+Guard: maximizing free solar energy
Solar Gains	Minimal (blocks UV)	Maximum (transmits UV)	Sol+Guard: unheated/partially heated pools
Cost	Higher	Mid-premium	Sol+Guard: better value for solar heating

---

❓ Comprehensive FAQ

About This Specific Product

Q: What makes the “180” version different from standard Sol+Guard? A: The 180 designation indicates enhanced UV protection rated for areas receiving up to 180 kilolangley years of ultraviolet exposure, compared to 140 kLys for standard versions. This provides 29% more UV stabilization, making it ideal for southern UK regions, coastal areas, or pools in full sun exposure. The enhanced formula maintains material integrity and translucency longer in high-UV environments.

Q: How much will this cover actually heat my pool? A: Temperature increases depend on multiple factors: sun exposure duration, starting water temperature, ambient air temperature, and existing heating systems. In optimal UK summer conditions (6+ hours of direct sunlight), you can expect 3-5°C increases on sunny days, with potential peaks up to 8°C. The translucent material maximizes UV penetration for active solar heating, unlike opaque covers that only retain existing heat.

Q: Will this work with my existing pool heating system? A: Absolutely—in fact, it’s designed to work in tandem with heat pumps, gas heaters, or solar heating systems. By reducing heat loss by up to 75% and adding 3-8°C of free solar heating, your existing system works far less to maintain temperature. Most customers report 40-60% reductions in heating system runtime, extending equipment life while slashing energy bills.

Q: Is this the right cover for my pool size and shape? A: This 16ft x 38ft (4.88m x 11.58m) cover is designed for pools of that specific rectangular dimension. If your pool is slightly smaller, the cover can be trimmed to fit. For different sizes, Parts4Tubs offers the Sol+Guard 180 in multiple standard sizes, plus bespoke custom sizing for irregular shapes. The cover should overlap the pool edge by 10-15cm for proper installation with a roller system.

Installation & Use

Q: Which way do the bubbles face—up or down? A: Bubbles always face DOWN into the water. The air trapped inside the bubbles is heated by the sun, and placing them in direct contact with water ensures maximum heat transfer. The smooth side faces up toward the sun. This is critical for both solar heating performance and heat retention.

Q: Do I need a roller system for this cover? A: While not strictly required, a roller system is highly recommended for a 16ft x 38ft cover. This size weighs approximately 25-30kg when dry and becomes heavier when wet. A roller makes daily use practical and prevents back strain. It also extends cover life by reducing dragging and folding stress. Parts4Tubs offers compatible roller systems designed for this cover size.

Q: Can I leave the cover on while running my pool pump and filter? A: Yes, absolutely. A properly installed cover won’t interfere with pump operation or water circulation. In fact, running your pump with the cover on improves filtration efficiency by reducing debris entry and maintaining more consistent water chemistry. Ensure the cover doesn’t obstruct skimmers or return jets.

Q: How do I remove the cover for swimming? A: With a roller system: Simply crank the handle to roll the cover onto the roller mechanism at one end of the pool—takes 2-3 minutes for this size. Without a roller: Fold the cover accordion-style and remove it, requiring two people for a cover this size. Store it out of direct sunlight when removed to prevent UV damage to the unprotected underside.

Maintenance & Durability

Q: How long will this cover last? A: With proper care, the Sol+Guard 500M 180 typically lasts 5-7 years, backed by a 6-year pro-rata warranty. GeoBubble technology extends lifespan 25% beyond standard bubble covers. Key longevity factors include:

• Maintaining pool water below 29°C (higher temps accelerate degradation)
• Keeping chemicals within SPATA standards (excessive chlorine damages material)
• Proper storage when not in use (out of season)
• Using a roller system (reduces handling stress)
• Regular cleaning (prevents chemical buildup)

Q: What maintenance does the cover require? A: Minimal maintenance needed:

• Rinse with fresh water weekly to remove chemical residue
• Check water chemistry stays within SPATA guidelines (excessive chlorine/low pH damages covers)
• Remove standing water from cover surface after rain (prevents weight stress)
• Store properly during winter months (clean, dry, out of sunlight)
• Inspect quarterly for damage and repair small holes immediately with patch kits

Q: What happens if my pool water exceeds 29°C? A: The 29°C maximum water temperature limit is critical for warranty coverage and material longevity. Higher temperatures accelerate chemical breakdown of the polymer material, causing premature bubbling, warping, and failure. If your pool regularly exceeds this temperature (common with dark liners in hot climates or aggressive heating), consider the Energy Guard or RaeGuard alternatives which are designed for hotter water conditions.

Q: Can I use this cover year-round in the UK? A: No—solar covers are designed for swimming season use (typically April-September in the UK). As temperatures drop and you close your pool for winter, switch to a purpose-designed winter cover. Solar covers aren’t built to withstand harsh winter conditions, heavy snow loads, or extended freezing. Proper seasonal storage (clean, dry, indoors) ensures your cover is ready for the next season.

Performance & ROI

Q: How quickly will I see the savings? A: Immediately. From day one, you’ll notice:

• Week 1: Water stays warmer overnight, less heating system runtime
• Month 1: First energy bill shows 40-60% reduction in pool heating costs
• Month 3: Noticeable reduction in water top-ups and chemical additions
• Month 6-9: Cover typically pays for itself through combined savings
• Year 2+: Pure profit—all savings go straight to your pocket

Q: What factors affect my actual savings? A: Individual results vary based on:

• Sun exposure: South-facing pools with 6+ hours of direct sunlight see maximum benefits
• Existing heating: Heavily heated pools save more in absolute terms; unheated pools see bigger percentage reductions
• Usage patterns: Pools covered 80%+ of the time show best results
• Water temperature: Maintaining lower temps (26-28°C vs 30°C+) increases savings
• Chemical management: Proper balanced chemistry maximizes cover effectiveness
• Cover condition: Well-maintained covers perform better longer

Q: Does this cover prevent algae growth? A: No—Sol+Guard’s translucent design intentionally allows UV light to penetrate, which means it does NOT prevent algae growth like opaque covers. If your pool has persistent algae issues, consider the Energy Guard 500M instead, which uses selective transmission technology to block algae-causing light wavelengths while still allowing some heat transmission. Sol+Guard is best for pools with good chemical balance that prioritize maximum solar heating.

Warranty & Support

Q: What does the 6-year pro-rata warranty cover? A: The warranty covers manufacturing defects and material failure under normal use conditions within SPATA standards. It’s “pro-rata,” meaning if failure occurs in year 3, you receive a credit toward a replacement based on the remaining warranty period. The warranty is VOID if:

• Pool water exceeds 29°C
• Chemical levels exceed SPATA guidelines (particularly high chlorine or low pH)
• TDS (total dissolved solids) levels are excessive
• Cover is used outside UK & Ireland
• Damage from improper installation, storage, or handling

Q: What if I need a different size? A: Parts4Tubs offers Sol+Guard 500M 180 in multiple standard sizes plus fully bespoke custom sizing for irregular pool shapes. All covers are made to order, allowing precise fitting for your specific pool dimensions. Use the online cover calculator to determine your exact requirements, or contact the team for expert sizing advice.

Q: Can I get replacement parts or repair kits? A: Yes, patch repair kits are available for small punctures or tears. However, extensive damage (large tears, separated bubbles, or material degradation) typically requires cover replacement. Regular inspection and immediate repair of minor damage extends cover life significantly.

---

🛡️ Important: What This Cover Is NOT Designed For

To set proper expectations and ensure safety:

❌ NOT a Safety Cover

This cover CANNOT support the weight of children, adults, or animals walking across it. If a person or pet steps onto the cover, they may fall through into the pool, creating a drowning hazard. If pool safety is a concern (young children, pets, unfenced pools), you need a dedicated safety cover system with weight-bearing capacity, not a solar cover.

❌ NOT a Winter Cover

Solar covers are designed for swimming season use only. They are not built to withstand:

• Heavy snow accumulation
• Ice formation
• Freezing temperatures
• Extended UV exposure when not being regularly removed
• Harsh winter weather conditions

Always switch to a proper winter cover when closing your pool for the season.

❌ NOT for Extremely Hot Pools

If your pool consistently runs above 29°C, this cover will degrade prematurely and void the warranty. Extremely hot water accelerates polymer breakdown. Consider whether you need this much solar heating—if your pool is already too hot, you might be better served by the RaeGuard or Energy Guard covers designed for heat retention in warmer water.

---

📋 Detailed Performance Disclaimers & Methodology

Savings Calculations Explained

The financial projections in this page are based on the following assumptions and methodologies. Your actual results will vary based on your specific circumstances.

Heating Cost Calculations:

• Pool size: 16ft x 38ft (49.6m²) with average depth of 1.5m = 74.4m³ water volume
• Swimming season: 6 months (April-September, UK average)
• Baseline heating consumption: 4,200-6,000 kWh per season (typical for this size with heat pump)
• Heat loss reduction: 75% (based on manufacturer and industry studies)
• Solar heating contribution: 3-8°C average temperature increase in optimal conditions
• Combined heating reduction: 40-60% of baseline consumption
• UK electricity rates: £0.28/kWh (domestic average as of 2024)
• Energy savings: £530-840 annually

Variables That Affect Your Heating Savings:

• Starting water temperature and target temperature
• Type of heating system (heat pump, gas, electric, solar)
• Hours of direct sunlight (south-facing pools see better results)
• Wind exposure (wind increases evaporative cooling)
• Ambient air temperature and humidity
• How consistently you use the cover (80%+ coverage time recommended)
• Pool insulation and construction materials
• Local electricity/gas rates

Water Cost Calculations:

• Evaporation rate: 6mm per day average for uncovered UK pool in summer
• Pool surface area: 49.6m²
• Daily evaporation: 297.6 litres
• 6-month season evaporation: 54,468 litres
• Sol+Guard evaporation reduction: 98%
• Water saved: 53,338 litres per season (rounded to 39,680L for conservative estimate)
• UK water costs: £4.40 per cubic metre (average including sewerage)
• Annual water savings: £171-234

Chemical Cost Calculations:

• Chemical reduction: Up to 30% (manufacturer data based on reduced evaporation)
• Typical seasonal chemical costs for this pool size: £250-400
• Chlorine savings: Approximately 5kg per season
• Additional savings from reduced pH adjusters, stabilizers, and algaecides due to less water dilution
• Conservative annual chemical savings: £80-120

Performance Metrics Sources

Temperature Increase Claims (up to 8°C): Based on manufacturer testing and industry studies in optimal conditions: full sun exposure, minimal cloud cover, south-facing pools, 8+ hours of direct sunlight, minimal wind. Most UK pools realistically see 3-5°C increases during peak summer months.

Heat Loss Reduction (75%): Sourced from industry research showing evaporation accounts for approximately 75% of pool heat loss. GeoBubble cover reduces evaporation by 90-98%, directly correlating to heat loss reduction.

GeoBubble 25% Longer Lifespan: Based on independent testing comparing GeoBubble design to traditional circular bubble covers under identical conditions.

6-9 Month ROI Period: Calculated by dividing cover cost (£594.84) by combined monthly savings (£98-131) during swimming season. Assumes consistent cover use and average UK conditions.

Warranty Limitations

The 6-year pro-rata warranty is subject to:

• Pool water temperature not exceeding 29°C
• Adherence to SPATA standards for chemical levels and TDS
• Proper installation and maintenance
• Use only in UK & Ireland
• No evidence of physical damage, chemical abuse, or improper storage

Pro-rata means the warranty value decreases over time. If failure occurs in Year 3, you receive 50% credit toward replacement.

---

🌍 Understanding UV Ratings: Is Sol+Guard 180 Right for Your Location?

UK UV Map Reference

The UV protection rating indicates how much ultraviolet exposure the material can withstand while maintaining its integrity and performance. Different formulations exist for different climatic regions.

Sol+Guard 140 (Standard Version):

• Rated for areas receiving up to 140 kLys/year UV exposure
• Suitable for most of Northern and Central UK
• Covers Scotland, Northern England, Wales, Midlands
• Appropriate for shaded or partially shaded pools
• Slightly lower cost than 180 version

Sol+Guard 180 (This Product):

• Rated for areas receiving up to 180 kLys/year UV exposure
• Designed for Southern UK regions
• Ideal for coastal areas with sun reflection
• Best for pools in fully exposed locations
• Enhanced UV stabilizers for maximum durability
• Recommended when in doubt about UV exposure levels

When to Choose Sol+Guard 180:

• Your pool is in southern England below Birmingham
• Coastal locations with intense sun reflection from water
• Pools without shade structures or trees
• Full sun exposure throughout the day
• You want maximum durability and longevity
• Extended swimming seasons (March-October)

When Standard 140 May Suffice:

• Northern UK locations (Yorkshire and above)
• Pools with significant shade during peak UV hours
• Budget-conscious buyers in appropriate regions
• Shorter swimming seasons (May-August only)

---

✅ Who Should Buy Sol+Guard 500M 180?

This cover is the ideal solution if you:

✓ Need to Increase Pool Temperature Your pool struggles to reach comfortable swimming temperatures, or you want to extend your season earlier in spring and later in autumn. The translucent design maximizes free solar heating.

✓ Want to Reduce Heating Bills You’re tired of expensive heating costs and want to slash your energy consumption by 40-60% while still enjoying warm water.

✓ Have Good Chemical Balance Your pool doesn’t suffer from persistent algae issues, and you maintain proper chemical levels. Sol+Guard’s translucent design doesn’t prevent algae growth like opaque covers.

✓ Live in Southern UK or High-Sun Areas Your location receives high UV exposure, or your pool sits in full sun most of the day. The 180 UV rating ensures longevity in these conditions.

✓ Want Professional-Grade Performance You’re looking for a mid-premium solution that outperforms budget covers without the cost of 600M premium options. The 500M thickness provides excellent value.

✓ Have Unheated or Partially Heated Pools Your pool relies primarily on solar heating, or you want to minimize heat pump runtime. Sol+Guard adds the most solar gain of any cover type.

✓ Value Long-Term Investment You understand that spending slightly more upfront on quality (GeoBubble technology, 500M thickness, enhanced UV protection) pays dividends through longer lifespan and better performance.

---

❌ Who Should Consider Alternatives?

This cover may NOT be your best choice if:

❌ Your Pool Has Persistent Algae Problems Sol+Guard’s translucent design allows light penetration, which can support algae growth if chemical balance isn’t perfect. Consider Energy Guard 500M instead—it uses selective transmission technology to block algae-causing wavelengths.

❌ Your Pool Already Runs Too Hot If your pool consistently exceeds 28-29°C, additional solar heating isn’t beneficial and may void the warranty. Consider RaeGuard 500M or 600M Gold covers designed for heat retention in already-warm pools.

❌ You Need Maximum Heat Retention for a Heated Pool If you have aggressive artificial heating and your priority is keeping heat IN rather than adding solar heating, the opaque 600M Gold with aluminium backing provides superior overnight heat retention.

❌ You’re on an Extremely Tight Budget If cost is the absolute priority and you’re in a low-UV area, the 400M Blue budget cover may be sufficient, though it won’t offer the same performance, durability, or warranty.

❌ You Need a Safety or Winter Cover Solar covers don’t provide safety protection or winter durability. You need dedicated safety covers or winter covers for those purposes.

---

🛒 What’s Included & Ordering Information

Package Contents

• 1x Sol+Guard 500M 180 GeoBubble solar cover, 16ft x 38ft (4.88m x 11.58m)
• 6-year pro-rata manufacturer warranty (UK & Ireland)
• Installation guide (bubbles face down)
• UV protection documentation

Important Ordering Notes

Made to Order: All GeoBubble solar covers are manufactured to order, meaning:

• Lead time: Typically 7-14 working days from order
• No returns on made-to-order items unless defective
• Covers cannot be cancelled once manufacturing begins
• Ensure you have accurate measurements before ordering

Bespoke Sizing Available: If this 16ft x 38ft size doesn’t match your pool exactly, Parts4Tubs offers custom sizing for rectangular, oval, and irregular pool shapes. Contact the team with your dimensions for a quote.

Not Included:

• Roller system (highly recommended—available separately)
• Repair/patch kit (available separately)
• Winter storage cover

---

🤔 Still Not Sure? Compare Sol+Guard Models

Parts4Tubs offers Sol+Guard in multiple configurations:

Model	UV Rating	Best For	Typical Cost	Warranty
Sol+Guard 140	140 kLys/yr	Northern/Central UK, shaded pools	10-15% less	6 years
Sol+Guard 180 (This Product)	180 kLys/yr	Southern UK, high sun exposure, maximum durability	Mid-range	6 years

Both versions offer:

• Same 500M thickness
• Same GeoBubble technology
• Same translucent solar heating design
• Same heat retention and evaporation reduction

The ONLY difference is UV stabilization level—choose based on your geographic location and sun exposure.

📞 Expert Guidance Available

Not sure if Sol+Guard 500M 180 is right for your pool?

The Parts4Tubs team can help you:

• Confirm your pool’s actual dimensions
• Assess your UV exposure level
• Compare Sol+Guard vs Energy Guard vs RaeGuard vs 600M Gold
• Recommend appropriate roller systems
• Provide custom sizing quotes
• Answer technical questions about your specific setup

Why buy from Parts4Tubs?

• Direct manufacturer relationship ensures authenticity
• Competitive UK pricing with VAT included
• Expert advice from Andi and the team (not just automated internet sales)
• Made-to-measure options for perfect fit
• Part of the trusted buildahottub.com family

🎯 Final Recommendation

The Sol+Guard 500M 180 GeoBubble solar cover is the right choice if:

You want to maximize free solar heating while also achieving excellent heat retention, evaporation reduction, and chemical preservation. The enhanced 180 UV rating makes it the most durable translucent solar cover for UK conditions, particularly in southern regions or high-exposure locations.

At £594.84, this cover typically pays for itself in 6-9 months through combined energy, water, and chemical savings of £785-1,131 annually. Over its expected 5-7 year lifespan, you’re looking at £3,925-7,917 in total savings—a return on investment of 6.6x to 13.3x your initial outlay.

If your pool needs active temperature increases, you maintain good chemical balance, and you want professional-grade performance that lasts, the Sol+Guard 500M 180 is an exceptional investment.

Ready to start saving? This 16ft x 38ft cover is made to order—typically ships within 7-14 working days.