☀️ Sol+Guard 500M 180 GeoBubble Solar Cover – Maximum Solar Heating with Enhanced UV Protection

Save £800-1,200+ Annually While Heating Your Pool Naturally

The Bottom Line Up Front

The Sol+Guard 500M 180 GeoBubble solar cover delivers industry-leading solar heating gains of up to 8°C while slashing your annual pool running costs by £800-1,200*. Unlike standard covers, the 180 formulation features enhanced UV stabilization specifically engineered for harsher sunlight conditions, extending cover lifespan by up to 25% compared to conventional bubble covers while maximizing heat transmission.

For a 15ft x 30ft pool at £440.00, this cover typically pays for itself in under 6 months through reduced heating, chemical, and water costs.

---

🎯 Who Is This Cover For?

The Sol+Guard 500M 180 is specifically designed for pool owners who:

✅ Prioritize solar heating gains over pure heat retention
✅ Experience intense sunlight or extended UV exposure (see UV map below)
✅ Want to minimize reliance on expensive heating systems
✅ Have pools with consistent sun exposure for natural heating
✅ Need superior UV protection for longer cover lifespan
✅ Seek to reduce chemical consumption and evaporation losses

Not ideal for: Heavily shaded pools (consider RaeGuard 500M), pools prone to algae (Energy Guard 500M is better), or those prioritizing maximum heat retention over solar gains (600M Gold offers superior insulation).

---

💰 Your Annual Savings Breakdown

For an average 4m x 8m (13ft x 26ft) UK pool, the Sol+Guard 500M 180 delivers:

Savings Category	Annual Reduction	Estimated £ Saved
Heating Energy	Up to 70% reduction (5,000-7,000 kWh)	£600-840/year*
Water Loss	98% evaporation reduction (32,000L saved)	£140/year**
Chemical Use	30% reduction (5kg chlorine)	£60-80/year***
Cleaning Time	75% less debris entry	Priceless
TOTAL SAVINGS	—	£800-1,060/year

Payback period for 15ft x 30ft cover (£440): Approximately 5-6 months

<details> <summary><em>*Calculation Assumptions & Variables (Click to expand)</em></summary>

Energy Cost Calculations:

• Based on UK electricity rates of £0.24-0.34/kWh (November 2024 average)
• Assumes pool heated to 26-28°C for 5-6 month season
• Heat pump efficiency: COP 4-6 (typical for modern units)
• Actual savings depend on: pool size, target temperature, local climate, heating system efficiency, cover usage consistency

Water Cost Calculations:

• Based on UK water rates averaging £4.40/m³ (including supply and wastewater)
• Evaporation estimate: 32,000L annually for 4x8m pool (Parks & Recreation study)
• Reduction rate: 90-98% with consistent cover use

Chemical Cost Calculations:

• Based on retail chlorine pricing (£12-16/kg for quality products)
• Average pool chemical spend: £200-400 annually
• Reduction reflects decreased UV degradation and evaporation losses

Individual results will vary based on pool usage patterns, local climate, heating system type, and maintenance practices.

</details>

---

🔬 What Makes Sol+Guard 180 Different?

The Translucent Solar Heating Advantage

Unlike opaque covers that simply retain heat, Sol+Guard’s translucent design actively heats your pool by transmitting UV rays directly into the water. This makes it the most effective solar heating cover available.

How it works:

1. UV Transmission: Clear material allows beneficial UV rays to penetrate to water below
2. Greenhouse Effect: GeoBubble air pockets trap solar heat like miniature greenhouses
3. Heat Transfer: Warmth conducts from bubbles directly into pool water
4. Reduced Reliance: Less need for expensive gas, electric, or heat pump operation

Result: Water temperature increases of up to 8°C in optimal conditions – often the difference between a comfortable swim and needing artificial heating.

Enhanced UV 180 Protection Technology

The 180 formulation contains advanced UV stabilizers rated for environments receiving up to 180 kilolangley years (kLys/yrs) of UV exposure.

What does this mean for you?

• Extended lifespan in high-UV environments (UK typically 80-120 kLys/yrs)
• Maintained performance – material doesn’t degrade prematurely under intense sun
• Better value – 6-year pro-rata warranty vs 3-4 years for standard covers
• Consistent heating – optical clarity maintained longer for sustained solar gains

UV Protection Map – Is 180 Right for Your Location?

<details> <summary><em>View UV Exposure Map (Click to expand)</em></summary>

The Sol+Guard 180 formulation is designed for areas receiving up to 180 kLys/yrs of UV exposure annually. While the UK typically ranges from 80-120 kLys/yrs, the 180 formulation provides:

• Over-engineered protection for UK conditions = longer lifespan
• Future-proofing against climate change and increased UV intensity
• Ideal for south-facing pools with maximum sun exposure
• Essential for conservatory pools where UV reflection intensifies exposure

Standard Sol+Guard (140) is rated for areas up to 140 kLys/yrs. The 180 formulation offers 28% more UV protection, translating to potential lifespan improvements of 1-2 years.

Reference: UV Map Guard Products Technical Documentation (Plastipack)

</details>

---

🏗️ GeoBubble Technology – Built to Last 25% Longer

The Sol+Guard 500M 180 features patented GeoBubble design that outlasts traditional bubble covers by 25%.

Why GeoBubble Outperforms Standard Bubble Wrap Covers

Feature	GeoBubble Design	Traditional Round Bubbles
Stress Points	Optimized geometry distributes stress evenly	Concentration at thin “waist” sections
Thickness	50% thicker material at joins	Thin, weak connection points
UV Exposure	Reduced surface area facing sun	Maximum surface area degradation
Expected Lifespan	6-8 years (with 6-year warranty)	3-4 years typical
Heat Retention	Superior air pocket stability	Bubble collapse over time

500M (micron) thickness strikes the optimal balance between:

• Solar transmission – not so thick it blocks beneficial UV
• Insulation value – substantial air gap for heat retention
• Durability – resistant to pool chemicals, physical handling
• Weight – manageable for daily cover/uncover operations

Comparison to alternatives:

• 400M covers: 20% less material = reduced lifespan and heat retention
• 600M covers: Better insulation but reduced solar transmission (better for heat retention than solar gains)

---

📊 How Sol+Guard 180 Compares to Other Cover Types

Choosing the right cover depends on your pool’s primary challenge. Here’s how Sol+Guard 180 stacks up:

Cover Type	Best For	Solar Heating	Heat Retention	Algae Prevention	Price Point
Sol+Guard 180	Solar heating gains	⭐⭐⭐⭐⭐	⭐⭐⭐	⭐⭐	Mid
Energy Guard 500M	Algae-prone pools	⭐⭐⭐⭐	⭐⭐⭐	⭐⭐⭐⭐⭐	Mid
RaeGuard 500M	Heat retention	⭐⭐	⭐⭐⭐⭐⭐	⭐⭐⭐⭐	Mid
Gold 600M	Maximum insulation	⭐⭐	⭐⭐⭐⭐⭐	⭐⭐⭐⭐	High
Blue 400M	Budget coverage	⭐⭐	⭐⭐	⭐⭐	Budget

When to Choose Sol+Guard 180 Over Alternatives:

Choose Sol+Guard 180 if:

• Your pool receives 6+ hours of direct sunlight daily
• You want to reduce heating system runtime significantly
• Solar heating gains are your primary objective
• You experience high UV intensity (south-facing, conservatory, or elevated exposure)
• You want excellent all-around performance without premium pricing

Choose Energy Guard 500M instead if:

• You struggle with persistent algae growth
• Pool is partially shaded but still needs heat retention
• You prioritize selective transmission (blocks algae-causing wavelengths, transmits heating wavelengths)

Choose RaeGuard 500M or Gold 600M instead if:

• Pool is artificially heated (heat pump/gas) and you prioritize retention over gains
• Heat loss overnight is your primary concern
• Pool receives limited direct sunlight

---

🛡️ Real-World Performance: What to Expect

Temperature Gains in British Conditions

Realistic expectations for UK climate (May-September):

Scenario	Typical Temperature Increase	Additional Notes
Sunny day (6+ hours sun)	+3-5°C	Peak performance conditions
Partly cloudy	+1-3°C	Still beneficial, reduced gains
Overcast	+0.5-1°C	Minimal solar gain, good heat retention
Overnight retention	-0.5-1°C loss (vs -3-5°C uncovered)	Insulation effect dominant

Season-long impact: Used consistently May-September, Sol+Guard 180 can maintain pool temperatures 4-8°C higher than an uncovered pool, often eliminating the need for heating in July-August.

Evaporation Reduction

32,000 litres saved annually = approximately 400 baths or 177 full bathtubs

For the average UK 4x8m pool:

• Uncovered loss: 3-6mm/day (windier/warmer = higher)
• With Sol+Guard: 0.1-0.5mm/day (90-98% reduction)

Financial impact: At £4.40/m³ water rates, that’s £140 in water costs plus another £60-100 in replacement chemicals that would have evaporated.

Chemical Lifespan Extension

30% reduction in chemical consumption comes from:

1. Reduced evaporation = chlorine stays in pool longer
2. UV protection = less photodegradation of chlorine
3. Debris prevention = chlorine not consumed breaking down organic matter

Typical annual savings: 5kg chlorine (£60-80 value) plus reduced pH balancing and clarifier needs.

---

⚙️ Technical Specifications

Specification	Details
Material	UV-stabilized polyethylene with GeoBubble technology
Thickness	500 microns (0.5mm)
UV Rating	180 kLys/yrs (enhanced formulation)
Warranty	6 years pro-rata (UK & Ireland only)*
Colour/Design	Translucent (optimized for UV transmission)
Bubble Design	Patented GeoBubble (25% longer lifespan than traditional)
Heat Retention	Up to 75% reduction in heat loss
Evaporation Control	90-98% reduction
Temperature Increase	Up to 8°C in optimal conditions**
Installation	Bubble side down (air pockets toward water)
Made to Order	Custom sizes available – see sizing guide
Suitable For	Outdoor pools, conservatory pools, solar heating priority

Warranty conditions:

• Pool water must not exceed 29°C
• Must maintain SPATA standards for chemical levels and TDS
• Pro-rata basis (proportional replacement value based on age)

Temperature increase variables:

• Hours of direct sunlight received
• Pool size and depth
• Ambient air temperature
• Wind conditions
• Cover usage consistency (full-time use vs partial)

---

🎓 Frequently Asked Questions

Installation & Usage

Q: Which way do the bubbles face – up or down?
A: Always install with bubbles facing DOWN toward the water. The air pockets need direct contact with the pool surface to transfer heat effectively. The flat side faces the sun.

Q: Can I run my pool pump with the cover on?
A: Yes, absolutely. When properly secured, the Sol+Guard cover will not interfere with pump circulation or skimmer operation. Many pool owners leave covers on 24/7 during the season for maximum efficiency.

Q: Do I need a roller system?
A: While not mandatory, a roller system is highly recommended for covers 12ft+ due to weight and handling ease. For a 15ft x 30ft cover:

• Manual handling: Possible but awkward, requires 2 people
• With roller: One person can easily deploy/retract in 2-3 minutes

Parts4Tubs offers compatible roller systems – contact for recommendations.

Q: How do I store the cover when not in use?
A:

• During season: Leave on pool 24/7 for best results, or store on roller when swimming
• Off-season (October-April): Clean, dry thoroughly, fold loosely, store in cool, dry place away from direct sunlight
• Winter: Replace with purpose-made winter cover; do NOT use solar covers in freezing conditions

Performance & Expectations

Q: Will this completely eliminate my heating costs?
A: No cover can entirely replace mechanical heating in UK conditions. Sol+Guard 180 will:

• Reduce heating runtime by 50-70% (huge cost savings)
• Extend comfortable swimming season by 4-6 weeks on either end
• Potentially eliminate heating during peak summer (July-August) if pool receives excellent sun

For early/late season or cooler climates, pair with a heat pump for maximum efficiency.

Q: How much difference does the 180 vs 140 formulation make?
A: For UK conditions (80-120 kLys/yrs UV), the 180 formulation provides:

• Over-engineered protection = extended lifespan (potentially 1-2 years longer)
• Future-proofing against increasing UV intensity due to climate change
• Maintained optical clarity longer = sustained solar heating performance

The 140 formulation works fine in most UK locations; 180 is the premium choice for longevity.

Q: I have a shaded pool – will this still help?
A: Sol+Guard is optimized for solar heating gains, so performance is significantly reduced in heavily shaded conditions. For shaded pools:

• Heat retention benefit remains (75% heat loss reduction)
• Evaporation control benefit remains (90-98% reduction)
• Solar heating benefit is minimal

Recommendation for shaded pools: Consider RaeGuard 500M or Gold 600M, which prioritize insulation over solar transmission.

Q: What water temperature increase should I realistically expect?
A: Highly variable based on conditions, but realistic UK expectations:

• Best case (full sun, May-August): +4-6°C over uncovered pool
• Typical case (mixed conditions): +2-4°C average
• Overcast/winter: +0.5-1°C (mostly heat retention, not solar gain)

Up to 8°C is achievable in ideal circumstances (full sun, shallow pool, warm ambient temp, minimal wind).

Algae & Water Quality

Q: Will the clear cover make algae problems worse?
A: Potentially yes if your pool is already prone to algae. Sol+Guard’s translucent design allows all wavelengths of light through, including those that promote algae growth.

Solutions:

• Maintain proper chemical balance (1-3 ppm free chlorine, balanced pH)
• Use algaecide preventatively during warm months
• Consider Energy Guard 500M instead – uses selective transmission technology to block algae-causing wavelengths while still transmitting heating wavelengths

Q: Does the cover keep debris out?
A: Yes, Sol+Guard provides excellent debris protection:

• Blocks 95%+ of leaves, insects, dirt, pollen
• Significantly reduces cleaning time and filter strain
• Not a safety cover – will not support weight of children/animals

For safety requirements, consider a dedicated safety cover system.

Sizing & Ordering

Q: How do I know what size to order?
A: The 15ft x 30ft (4.6m x 9.1m) listing is one of many standard sizes available. For custom sizing:

1. Measure your pool at the waterline (not the coping)
2. Add 10-15cm overlap on all sides for optimal coverage
3. Use the Parts4Tubs solar cover calculator for exact measurements
4. Bespoke sizes available – covers are made to order

Note: All Sol+Guard covers are made to order – typical lead time is 7-14 days.

Q: Can I trim the cover if it’s slightly too large?
A: Yes, GeoBubble covers can be trimmed with heavy-duty scissors or a sharp knife. However, order as close to exact size as possible – significant trimming wastes material and money.

Durability & Warranty

Q: How long will the Sol+Guard 180 last?
A: With proper care and maintenance:

• 6-year pro-rata warranty (manufacturer guarantee)
• Realistic lifespan: 6-8 years for well-maintained covers
• GeoBubble technology extends life 25% beyond traditional bubble covers

Lifespan factors:

• Water temperature (warranty void if >29°C maintained)
• Chemical balance (must meet SPATA standards – excessive chlorine degrades material)
• Handling care (dragging on rough surfaces damages bubbles)
• Off-season storage (protect from UV when not in use)

Q: What does “pro-rata warranty” mean?
A: If the cover fails due to material defects during the warranty period, replacement value is calculated proportionally:

• Year 1: 100% replacement value
• Year 2: 83% replacement value
• Year 3: 67% replacement value
• Year 4: 50% replacement value
• Year 5: 33% replacement value
• Year 6: 17% replacement value

Warranty does not cover: normal wear and tear, improper storage, chemical damage from poor water balance, physical damage from sharp objects, or use in water exceeding 29°C.

Cost & Value

Q: Why is this more expensive than basic blue bubble covers?
A: Price differences reflect material quality and technology:

Feature	Basic 400M Blue	Sol+Guard 500M 180
Material thickness	400 microns	500 microns (25% more)
Bubble design	Traditional round	Patented GeoBubble
UV protection	Standard	Enhanced 180 kLys rating
Warranty	2-3 years typical	6 years pro-rata
Expected lifespan	3-4 years	6-8 years
Solar transmission	Limited	Optimized for max heating

Cost per year of use:

• Blue 400M at £200 ÷ 3 years = £67/year
• Sol+Guard 180 at £440 ÷ 7 years = £63/year

Sol+Guard delivers superior performance at similar annual cost, plus significantly better heating efficiency that increases annual savings.

Q: Is there a cheaper option that’s still good quality?
A: The Sol+Guard 500M (140 formulation) offers the same solar heating performance at a slightly lower price point – the difference is UV stabilization rating (140 vs 180 kLys/yrs). For most UK locations, 140 is perfectly adequate.

For budget-conscious buyers accepting reduced lifespan: Blue 400M covers provide basic coverage at £200-300 depending on size.

---

✅ Why Buy from Parts4Tubs?

Made-to-Measure Perfection

All GeoBubble covers are manufactured to your exact specifications:

• No compromises on fit – every pool is unique
• Minimal waste – custom sizing means no unnecessary material
• Optimal coverage – precise measurements ensure complete heat retention and evaporation control

Standard sizes available (including this 15ft x 30ft listing) for immediate ordering, or request a custom quote for non-standard dimensions.

Expert Guidance Available

Parts4Tubs isn’t just an online store – you’re buying from real people with real pool expertise:

“Hi, I’m Andi! When you buy from parts4tubs.co.uk, you’re buying from me – not just the internet. I built my own hot tub and pool systems and created this store to help others find the right solutions. Can’t find what you need? Get in touch!”

• Direct access to knowledgeable staff who understand pool systems
• Honest product recommendations – we’ll tell you if another cover suits your needs better
• Sizing assistance – help measuring and determining optimal cover size
• Post-purchase support – installation guidance and care advice

Transparent Pricing & Service

• No hidden fees – price shown is price paid (including VAT)
• Made to order – typical 7-14 day lead time from order to dispatch
• Secure payment options – Visa, Mastercard, PayPal, Apple Pay, Google Pay
• UK-based company – Amandi Holdings Limited, fully registered and insured

---

🚨 Important Disclaimers & Warranty Terms

Performance Variables

All performance figures (temperature increases, savings calculations, evaporation reduction) are estimates based on typical conditions and will vary based on:

Environmental factors:

• Hours of direct sunlight received daily
• Ambient air temperature and seasonal variation
• Wind conditions (wind significantly increases evaporation)
• Pool location and shading

Pool-specific factors:

• Pool size, shape, and depth
• Water temperature target
• Heating system type and efficiency
• Usage patterns (how often cover is removed)

Maintenance factors:

• Water chemistry balance (affects cover lifespan and clarity)
• Cleaning and care practices
• Proper storage during off-season

Warranty Conditions (CRITICAL)

The 6-year pro-rata warranty is subject to strict conditions:

✅ Warranty IS VALID if:

• Pool water temperature remains below 29°C at all times
• Water chemistry maintained within SPATA standards (pH 7.2-7.6, chlorine 1-3 ppm, TDS within normal ranges)
• Cover used for intended purpose (outdoor pool solar heating and heat retention)
• Material failure occurs (degradation, delamination, manufacturing defects)

❌ Warranty IS VOID if:

• Pool water exceeds 29°C (common with solar heating in conservatories – monitor carefully!)
• Chemical levels exceed SPATA standards (particularly excessive chlorine/shock treatments)
• Physical damage (tears, punctures, abrasion from rough surfaces)
• Improper storage (left in direct sun when not on pool, frozen conditions)
• Normal wear and tear (fading, gradual degradation over time)

Pro-rata calculation: Warranty provides proportional replacement value based on cover age. See FAQ section for year-by-year breakdown.

Financial Savings Disclaimers

Savings calculations presented in this page are estimates only based on:

• UK average electricity rates (£0.24-0.34/kWh, November 2024)
• UK average water rates (£4.40/m³ including wastewater)
• Standard pool size (4m x 8m / 13ft x 26ft)
• 5-6 month swimming season (May-September)
• Heat pump efficiency (COP 4-6)
• Consistent cover usage (on pool when not actively swimming)

Individual results will vary significantly. Your actual savings may be higher or lower depending on all factors listed in Performance Variables section above.

Payback period calculations assume consistent usage and typical UK conditions. Pools in shaded locations, with minimal heating, or in warmer climates will see different ROI timelines.

Safety Notice

This is NOT a safety cover. The Sol+Guard 500M 180 GeoBubble cover:

❌ Cannot support weight of children, adults, or animals
❌ Is not designed to prevent accidental pool entry
❌ Should not be relied upon as a drowning prevention measure

If safety is a concern:

• Install a compliant pool fence/barrier system
• Use a dedicated safety cover rated for load bearing
• Maintain adult supervision around pool area
• Consider automatic safety cover systems

---

📏 Available Sizes & Custom Options

Standard Sizes Currently Available:

The Sol+Guard 500M 180 range includes multiple pre-configured sizes:

• 10ft x 20ft (3m x 6m) – £195.00
• 12ft x 24ft (3.7m x 7.3m) – £281.24
• 13ft x 27ft (4m x 8.2m) – £342.98
• 14ft x 28ft (4.3m x 8.5m) – £383.16
• 15ft x 30ft (4.6m x 9.1m) – £440.00 ← This listing
• 16ft x 32ft (4.9m x 9.8m) – £500.76
• 16ft x 38ft (4.9m x 11.6m) – £594.84
• 18ft x 36ft (5.5m x 11m) – £634.00
• 20ft x 40ft (6.1m x 12.2m) – £783.00

Need a Custom Size?

Bespoke covers available for non-standard pool dimensions:

1. Measure your pool at the waterline (inside edge of coping)
2. Add 10-15cm (4-6 inches) on all sides for overlap
3. Use the Parts4Tubs solar cover calculator or contact us directly for a custom quote

Made-to-order benefits:

• Perfect fit ensures maximum efficiency
• No wasted material from oversized covers
• Professional measurement assistance available
• Competitive pricing on custom sizes

Lead time: 7-14 days from order confirmation to dispatch.

---

🌡️ Best Practices for Maximum Performance

Installation Tips

✅ Initial setup:

• Install with bubbles facing DOWN (toward water surface)
• Trim edges if necessary (but order correct size to avoid waste)
• Ensure complete pool coverage with minimal gaps
• Consider a roller system for pools 12ft+ (dramatically improves usability)

✅ Daily usage:

• Cover pool immediately after swimming for best heat retention
• Remove before swimming (obviously!) – never enter pool with cover on
• Keep cover clean – hosing off debris monthly maintains transparency
• Check for tears or damage periodically

Seasonal Strategy

May-September (peak season):

• Leave cover on pool 24/7 except when actively swimming
• This maximizes both solar gains during the day AND heat retention overnight
• Typical routine: uncover 30 min before swimming, re-cover immediately after

April & October (shoulder season):

• Cover becomes essential for maintaining comfortable temperatures
• Combined with heat pump, can extend season by 4-6 weeks total
• Solar gains less powerful but heat retention critical

November-March (winter):

• SWITCH TO WINTER COVER – solar covers not designed for freezing conditions
• Store Sol+Guard properly: clean, dry, fold loosely, store in dry location away from sunlight
• Never leave solar cover on pool during winter or in freezing conditions

Water Chemistry Management

Proper chemical balance extends cover life and maintains performance:

Target levels (SPATA standards):

• pH: 7.2-7.6 (7.4 ideal)
• Free chlorine: 1-3 ppm
• Total alkalinity: 80-120 ppm
• Calcium hardness: 200-400 ppm
• TDS (Total Dissolved Solids): <1500 ppm

⚠️ Avoid shock treatments with cover on – high chlorine levels (>5 ppm) degrade plastic material. Remove cover before shocking, wait 24 hours before replacing.

Maintenance & Cleaning

Monthly maintenance:

1. Remove cover from pool
2. Spray down with clean water (hose)
3. Use soft brush on stubborn dirt/algae spots
4. Allow to dry completely before re-installing
5. Inspect for damage (small tears can be patched)

Chemical cleaning (every 3-6 months):

• Use mild detergent solution (never harsh chemicals)
• Rinse thoroughly to remove all soap residue
• Vinegar solution can remove calcium deposits

Never use:

• Pressure washers (can damage bubble structure)
• Abrasive scrubbers
• Chlorine-based cleaners
• Solvents or harsh chemicals

---

🎁 What’s Included & What You’ll Need

Included with Your Purchase:

✅ Sol+Guard 500M 180 GeoBubble Solar Cover – 15ft x 30ft
✅ 6-Year Pro-Rata Warranty documentation
✅ Installation and care instructions
✅ UV protection rating certification

NOT Included (Sold Separately):

❌ Cover roller/reel system – highly recommended for pools 12ft+
❌ Cover storage bag/container – for off-season storage
❌ Repair patches – useful for extending cover life
❌ Chemical test kit – essential for proper water chemistry

Recommended accessories available from Parts4Tubs:

• Domestic pool cover rollers (£150-400 depending on size and features)
• Commercial-grade rollers for larger pools
• Cover repair kits
• Pool water test kits and chemicals

📞 Ready to Start Saving £800-1,200 Annually?

Order Your Sol+Guard 500M 180 Cover Today

15ft x 30ft (4.6m x 9.1m): £440.00 (Inc VAT)

This cover typically pays for itself in under 6 months through reduced energy, water, and chemical costs.

Why order now?

⏰ Seasonal timing – order in March-April to maximize first-season value
💷 Energy costs rising – every month delayed is money lost to inefficiency
🎯 Made to order – 7-14 day lead time means planning ahead ensures readiness
🌞 Swimming season approaching – install before warm weather begins

Our experts can help with:

• Determining optimal cover type for your specific conditions
• Precise sizing and measurement assistance
• Comparison with other GeoBubble covers (Energy Guard, RaeGuard, Gold 600M)
• Roller system recommendations
• Installation and maintenance guidance

📋 Summary: Is Sol+Guard 500M 180 Right for You?

✅ Ideal Choice If:

• Your pool receives 6+ hours of direct sunlight daily
• Solar heating gains are your primary objective
• You experience high UV intensity (south-facing, conservatory, elevated exposure)
• You want to dramatically reduce heating costs (50-70% reduction)
• You need 6-8 year lifespan from a premium cover
• You’re looking for excellent all-around performance at mid-range pricing

❌ Consider Alternatives If:

• Pool is heavily shaded (RaeGuard or Gold 600M better for pure retention)
• Algae is a persistent problem (Energy Guard 500M has selective transmission)
• You need a safety cover (this cannot support weight)
• Budget is primary concern (Blue 400M offers basic coverage for less)

The Bottom Line:

For pool owners seeking maximum natural heating performance combined with proven durability and longevity, the Sol+Guard 500M 180 GeoBubble cover represents exceptional value. The enhanced UV protection ensures years of reliable service, while the translucent design delivers industry-leading solar heating gains that can reduce your annual pool operating costs by £800-1,200+.

At £440 for a 15ft x 30ft cover with a 5-6 month payback period, this is one of the smartest investments you can make in your pool.