PPG Deluxe Super Floculant 20 Litre – Professional Water Clarification for Pools and Spas

Product Overview

As a trusted retailer of pool and spa maintenance products, we proudly offer the PPG Deluxe Super Floculant 20 Litre, a professional-grade liquid flocculant designed to eliminate cloudiness in pool and spa water. This advanced formulation, containing aluminium polychlorosulfate, agglomerates fine particles such as algae, dust, and organic debris, enhancing filtration efficiency to deliver crystal-clear water. Intended for professional and general public use, it requires strict adherence to safety and handling protocols to ensure effective and environmentally responsible application.

---

Important Safety Notice

This product is classified as Corrosive to Metals (H290) and Serious Eye Damage/Irritation, Category 2 (H319) under GB CLP (SI 2019/720). It causes serious eye irritation and may be corrosive to metals, necessitating professional handling, proper personal protective equipment (PPE), and measures to prevent environmental release.

---

Safety Sheet PDF Download

Safety Data Sheet 

Technical Specifications

Specification	Detail
Volume	20 Litres
UN Number	Not applicable
Hazard Class	Corrosive to Metals (H290), Serious Eye Damage/Irritation, Category 2 (H319)
Packing Group	Not applicable
Transport Category	Not applicable
Environmental Status	Not classified as environmentally hazardous
Supplier	Golden Coast Ltd, Unit 1, High Road, EX31 3UA Devon Barnstaple, UK
Physical State	Liquid
Active Ingredient	Aluminium polychlorosulfate (CAS: 20290-78-3)
Concentration	Not specified (assumed 10–20% based on similar flocculants)
Colour	Clear to slightly turbid
Odour	Odourless
Density	1.24 g/cm³
pH	3.5–4.5 (assumed for aluminium polychlorosulfate solutions)
Solubility	Fully miscible with water
Boiling Point	105°C at 1013 hPa
Flash Point	Non-flammable (>100°C)
Viscosity	Low to medium (10–100 cP at 20°C, estimated)
Application	Water clarification for pools and spas
Dosage	100–250 mL per 100m³ (10,000 gallons) for cloudy water (industry standard)
Toxicity (LD50 Oral, Rat)	300–2000 mg/kg
Toxicity (LD50 Dermal, Rat)	300–2000 mg/kg
Toxicity (LC50 Inhalation, Rat)	>5 mg/L (4h)
Shelf Life	1–2 years in original, sealed container

Professional Applications

• Water Clarification: Agglomerates fine particles for removal via sand filtration, restoring water clarity.

• Cloudy Water Treatment: Eliminates turbidity caused by algae, dust, or organic matter.

• Filtration Optimization: Enhances sand filter performance by capturing microscopic debris.

• Professional Maintenance: Suitable for commercial and residential pools and spas.

• Debris Management: Targets suspended particles causing haze or cloudiness.

• Specialized Use: Ideal for high-traffic pools or challenging water conditions.

Safety Requirements

• Professional Use Recommended: Suitable for trained personnel; general public must follow strict guidelines.

• Full PPE Mandatory: Wear nitrile gloves, safety goggles, and protective clothing to prevent skin/eye contact.

• Certified Handlers Preferred: Requires knowledge of chemical handling for safe use.

• Ventilated Area Essential: Apply in well-ventilated spaces to minimize vapour inhalation risks.

• Emergency Protocols: Ensure access to eyewash stations, emergency showers, and spill kits.

• Spill Procedures: Contain spills with absorbent materials (e.g., vermiculite); prevent entry into drains.

Storage Guidelines

• Secure Storage Required: Store in a locked, restricted-access area to prevent unauthorized use.

• Cool, Ventilated Area: Keep at 5–30°C in a dry, well-ventilated space to maintain stability.

• Original Container Only: Use supplier-provided, non-corrodible containers (e.g., HDPE) to avoid metal corrosion.

• Away from Incompatibles: Store away from metals, strong oxidizers, acids, and bases to prevent reactions.

• Temperature Controlled: Avoid freezing (<0°C) or excessive heat (>40°C) to prevent degradation.

• Secondary Containment: Use spill trays to contain potential leaks and protect surfaces.

Handling Protocols

• Safe Handling Precautions: Handle with care to avoid skin/eye contact and wear appropriate PPE.

• Proper Dilution Essential: Pre-dilute in a bucket of pool water (1:10 ratio) before adding to pool.

• Full PPE Mandatory: Use nitrile gloves, goggles, and protective clothing during handling and application.

• Ventilation Required: Ensure adequate airflow to prevent accumulation of vapours or mists.

• Emergency Procedures: Keep neutralizing agents (e.g., sodium bicarbonate) and first aid kits available.

• First Aid Protocols: For skin/eye contact, rinse with water for 15 minutes and seek medical attention immediately.

Regulatory Compliance

• GB CLP Classification: Classified as H290 (Corrosive to Metals) and H319 (Serious Eye Irritation) per SI 2019/720.

• Transport Regulations: Not classified as hazardous for transport.

• Environmental Regulations: Complies with REACH (EC) No 1907/2006 and UK CLP (SI 2019/720); avoid environmental release.

• Safety Data Sheets: SDS must be accessible at all handling and storage sites.

• Proper Labelling: Containers must display GHS pictograms for corrosive and irritant hazards.

Professional Requirements

• Trained Handlers Recommended: General public may use with caution; professional training preferred for safe handling.

• Safety Equipment Essential: Requires PPE, eyewash stations, and spill kits.

• Chemical Handling Expertise: Knowledge of flocculant chemistry and risks is advised.

• Emergency Response Plan: Facilities must have protocols for spills, exposures, and first aid.

• Proper Disposal Methods: Dispose of residuals and containers via licensed hazardous waste collectors.

• Storage Compliance: Adhere to local regulations for chemical storage.

Transport Information

• Non-Hazardous for Transport: Not classified under ADR/IMDG/IATA/ADN/RID.

• Packing Group: Not applicable.

• Environmental Hazard: Not classified as environmentally hazardous, but avoid release to environment.

• Proper Documentation: Include SDS and product details during transport.

• Safety Markings: Containers must display GHS corrosive and irritant labels.

• Transport Precautions: Ensure containers are sealed and upright to prevent leaks.

Usage Guidelines

• Dilution Required: Pre-dilute 100–250 mL per 100m³ (10,000 gallons) in a bucket of pool water (1:10 ratio); add with pump running in recirculation mode (based on industry standards, e.g., Bayrol Quickflock).

• Careful Application: Distribute evenly near return lines; stop pump after 1–2 hours to allow flocs to settle (12–24 hours).

• Water Testing Essential: Verify pH (7.2–7.6) and turbidity before/after application using a test kit.

• Proper Mixing Order: Add flocculant to water; avoid mixing with chlorine, acids, or other chemicals to prevent reactions.

• Monitor Filtration: Vacuum settled flocs to waste or backwash sand filter after treatment; unsuitable for cartridge/DE filters.

• Safety First Approach: Wear PPE and ensure emergency measures are in place during application.

Quality Assurance

Manufactured to meet professional standards, compliant with REACH Regulation (EC) No 1907/2006 and UK CLP (SI 2019/720). The PPG Deluxe Super Floculant, with aluminium polychlorosulfate, is formulated for effective water clarification in pools and spas, ensuring compatibility with sand filter systems and minimal risk when used as directed.