Poolex Vertigo Fi 155T Full Inverter Vertical Swimming Pool Heat Pump with WiFi & Cloud Control – 21.2kW, R32 Refrigerant (Three Phase 400V) 🌊

Transform your swimming experience with the Poolex Vertigo Fi 155T, a cutting-edge full inverter heat pump that combines exceptional performance with whisper-quiet operation. Engineered for pools up to 115m³, this three-phase powerhouse delivers 21.2kW of heating capacity while consuming up to 35% less energy than traditional on/off heat pumps. With integrated WiFi control, vertical space-saving design, and advanced R32 refrigerant technology, the Vertigo Fi 155T represents the pinnacle of modern pool heating.

Full Inverter Technology for Maximum Efficiency Unlike conventional heat pumps that constantly switch on and off, the Vertigo Fi 155T uses stepless inverter technology with a multi-frequency compressor and variable-speed fan. This means smooth, continuous operation at the exact power level needed, avoiding energy-wasting consumption peaks while dramatically reducing noise levels.

Exceptional Energy Savings With a remarkable COP (Coefficient of Performance) of up to 15.17 at optimal conditions, this heat pump extracts up to 94% of its energy from the ambient air—completely free. For every 1kW of electricity consumed, you receive over 15kW of heating power. That’s genuine efficiency that translates to lower running costs season after season.

Ultra-Quiet Operation for Peaceful Enjoyment Operating at just 24-32 dB(A) at 10 metres, the Vertigo Fi 155T is quieter than a whisper. Multiple operating modes including Silent mode ensure your pool heating never disturbs your relaxation or your neighbours’ peace.

Compact Vertical Design The innovative vertical architecture with upward air discharge requires minimal installation space—perfect for confined areas where traditional horizontal units won’t fit. The compact footprint (575mm x 575mm x 780mm) makes it ideal for patios, decking areas, and tight equipment spaces.

Smart WiFi Control from Anywhere Integrated WiFi connectivity with the Smart Life app puts complete control in your pocket. Adjust temperature, switch operating modes, set schedules, and monitor performance from your smartphone—whether you’re at home or away. Compatible with iOS and Android devices.

📋 Complete Technical Specifications

Heating Performance

Test Conditions	Specification	Value
Inverter Mode (Air 26°C / Water 26°C)
Maximum Heating Power		21.2 kW
Minimum Heating Power		4.05 kW
Power Consumption (Max/Min)		3.09 kW / 0.266 kW
COP (Max/Min)		15.23 / 6.86
Standard EU Test (Air 15°C / Water 26°C)
Maximum Heating Power		15.83 kW
Minimum Heating Power		3.15 kW
Power Consumption (Max/Min)		3.28 kW / 0.417 kW
COP (Max/Min)		7.55 / 4.82
Silent Mode (Air 26°C / Water 26°C)
Heating Power Range		13.11 – 4.05 kW
Power Consumption Range		1.81 – 0.266 kW
COP Range		15.23 – 7.24

Cooling Performance

Test Conditions	Value
Cooling Mode (Air 35°C / Water 27°C)
Cooling Capacity (Max/Min)	10.29 – 3.39 kW
Power Consumption (Max/Min)	3.01 – 0.710 kW
EER (Energy Efficiency Ratio)	4.77 – 3.39

Electrical Specifications

Parameter	Specification
Power Supply	380-415V / 3 Phase / 50Hz
Maximum Current	8.58 A
Maximum Power Draw	4.8 kW
Recommended Cable	RO2V 5 x 2.5 mm²
Circuit Protection	10A Type D MCB
Electrical Protection Rating	IPX4 (splash-proof)

Physical & Environmental

Specification	Detail
Dimensions (L x W x H)	575 x 575 x 780 mm
Net Weight	52 kg
Packaging Dimensions	635 x 635 x 920 mm
Gross Weight	60 kg
Operating Temperature Range	-10°C to +43°C
Heating Temperature Range	15°C to 40°C
Cooling Temperature Range	8°C to 28°C

Hydraulic & Sound Specifications

Parameter	Value
Hydraulic Connections	50mm PVC (included)
Recommended Pool Volume	80 – 115 m³
Water Flow Rate (Min/Max)	6.7 m³/h
Head Loss	1.1 mCE
Sound Pressure at 1m	42 – 52 dB(A)
Sound Pressure at 10m	24 – 32 dB(A)

Core Components

Component	Specification
Compressor Type	GMCC Twin-Rotary Inverter
Compressor Brand	GMCC
Heat Exchanger	Twisted Tech© Titanium Coil in PVC Housing
Refrigerant	R32 (environmentally friendly)
4-Way Valve	Reversible (heating/cooling)
Expansion Valve	Electronic (EEV)
Fan Type	DC Variable Speed

📥 Downloads & Technical Documentation

Access comprehensive technical information and installation guides for your Poolex Vertigo Fi 155T:

📄 Installation and User Manual (opens in new tab) Complete 43-page installation and operation manual covering setup procedures, electrical connections, hydraulic installation, WiFi pairing, operating modes, maintenance schedules, troubleshooting guide, and wiring diagrams. Essential reading for installers and owners.

📄 Technical Datasheet – Vertigo Fi Range (opens in new tab) Official Poolex product specification sheet detailing technical performance data, dimensions, COP values across all operating conditions, noise levels, and comparative specifications for the entire Vertigo Fi range (55-350T models).

🏊 Pool Sizing Guide & Heat-Up Time Estimates

Recommended Pool Volumes

The Poolex Vertigo Fi 155T is ideally suited for:

✅ In-Ground Pools: 80 – 115 m³ (with cover) ✅ Above-Ground Pools: 70 – 100 m³ (with cover) ✅ Commercial/Community Pools: Consult for multi-unit installations

Important: Pool sizing depends on several factors including climate region, desired swimming season, pool insulation, use of a pool cover, and shade/shelter. A high-quality bubble cover can reduce heating requirements by up to 70%.

Estimated Heat-Up Times ⏱

The tables below provide estimated times to heat various pool volumes from 15°C to your desired temperature. These calculations use the unit’s heating capacity at standard conditions (15°C air / 26°C water) of 15.83 kW.

Formula Used: Time (hours) = (Pool Volume m³ × Temperature Rise °C × 1.16) ÷ Heat Pump kW Rating

Heat-Up Time Table: 15°C to 25°C (10°C rise)

Pool Size	Volume (m³)	Litres	Estimated Time*
Small	30 m³	30,000 L	~22 hours
Medium	50 m³	50,000 L	~37 hours
Medium-Large	70 m³	70,000 L	~51 hours
Large	90 m³	90,000 L	~66 hours
Extra Large	110 m³	110,000 L	~81 hours

Heat-Up Time Table: 15°C to 28°C (13°C rise)

Pool Size	Volume (m³)	Litres	Estimated Time*
Small	30 m³	30,000 L	~29 hours
Medium	50 m³	50,000 L	~48 hours
Medium-Large	70 m³	70,000 L	~67 hours
Large	90 m³	90,000 L	~86 hours
Extra Large	110 m³	110,000 L	~105 hours

⚠️ Important Disclaimers:

These are theoretical estimates based on ideal conditions. Actual heat-up times will vary based on:

• Ambient temperature: Colder air reduces heat pump efficiency
• Wind exposure: Increases heat loss from pool surface
• Pool cover usage: Using a cover can reduce heat-up time by 30-50%
• Pool insulation: In-ground vs above-ground construction
• Night-time cooling: Heat loss during overnight periods
• Initial water temperature: Starting from colder water takes longer
• Humidity levels: Affects heat pump performance

💡 Pro Tip: Use a high-quality bubble cover to retain heat overnight and reduce heating time by up to 50%. Running your heat pump continuously during initial heat-up is more efficient than intermittent operation.

🌟 Key Features & Benefits

Full Inverter Technology

Smart, Stepless Power Control The Vertigo Fi 155T continuously adjusts its compressor and fan speed to match your exact heating needs. When initially heating your pool, it runs at maximum capacity for rapid temperature rise. Once the target temperature is reached, it automatically reduces to low-power maintenance mode—dramatically cutting energy consumption while maintaining perfect water temperature.

Energy Savings: Up to 35% lower running costs compared to traditional on/off heat pumps.

Multiple Operating Modes 🎯

Choose the perfect mode for your needs:

⚡ Boost Mode – Maximum power for rapid pool heating Ideal for: First-time heat-up, spring pool opening, preparing for pool parties

🔄 Inverter Mode – Balanced performance and efficiency Ideal for: Daily use, maintaining comfortable temperatures

🔇 Silent Mode – Ultra-quiet operation with reduced power Ideal for: Evening swimming, noise-sensitive areas, overnight operation

🤖 Auto Mode – Smart automatic mode selection The heat pump intelligently selects the optimal operating mode based on the temperature differential between your pool and target temperature

❄️ Cooling Mode – Active water cooling for hot climates Perfect for summer months when water temperatures exceed 28°C

WiFi Smart Control with Smart Life App 📱

Complete Remote Management

The integrated WiFi module connects your heat pump to the Smart Life ecosystem, giving you unprecedented control:

✅ Remote Temperature Adjustment – Set your pool temperature from anywhere ✅ Operating Mode Selection – Switch between Boost, Eco, Silent, and Auto modes ✅ Scheduling & Timers – Program up to 3 different start/stop schedules ✅ Real-Time Monitoring – View current pool temperature, air temperature, and system status ✅ Instant Notifications – Receive alerts for temperature targets reached or error codes ✅ Multi-Device Control – Manage multiple smart pool devices from one app ✅ Voice Control Compatible – Works with Amazon Alexa and Google Home (region dependent)

Quick Setup: Simply connect the heat pump to your 2.4GHz WiFi network, pair with the Smart Life app, and you’re ready to control your pool from your smartphone or tablet.

Advanced Defrost Protection System ❄️

Operates Down to -10°C Air Temperature

The Vertigo Fi 155T features dual antifreeze protection:

1. Automatic Reverse-Cycle Defrost When ice forms on the evaporator, the system automatically reverses to cooling mode briefly to melt ice, then returns to heating. This happens seamlessly without interrupting your heating schedule.

2. Poolex Patented Antifreeze System Revolutionary heat exchanger design with built-in freeze protection. The system monitors ambient and water temperatures continuously, activating protection protocols before damage can occur.

Standby Protection: Even when switched off, if temperatures drop below 2°C, the system automatically activates to prevent freezing of the heat exchanger and connected pipework.

Compact Vertical Space-Saving Design 📐

Perfect for Confined Installations

Traditional horizontal heat pumps need significant clearance in front and behind. The Vertigo Fi’s vertical design with upward air discharge solves this:

✅ Minimal Footprint: Just 575mm x 575mm base ✅ Upward Air Discharge: Requires only 50cm side clearance ✅ No Front Clearance Needed: Can be positioned against walls or fences ✅ Ideal For: Patios, decks, narrow side passages, equipment rooms

The vertical orientation maximizes available space while the upward ventilation ensures optimal airflow without bothering neighbors or obstructing views.

Premium Components for Long-Lasting Performance 🏆

GMCC Twin-Rotary Inverter Compressor Industry-leading compressor technology delivering smooth, efficient operation with extended lifespan. The twin-rotary design provides superior compression efficiency and reduced vibration.

Twisted Tech© Titanium Heat Exchanger Poolex’s patented titanium coil heat exchanger offers:

• Superior Corrosion Resistance: Compatible with all pool treatments including saltwater, chlorine, and bromine
• Exceptional Heat Transfer: Maximizes efficiency
• 15-Year Corrosion Warranty: Demonstrates unmatched durability
• Patented Antifreeze Design: Built-in freeze protection

R32 Refrigerant – The Eco-Friendly Choice R32 is the next-generation refrigerant offering:

• Higher Efficiency: Better heat transfer properties than R410A or R407C
• Lower Environmental Impact: 67% lower Global Warming Potential (GWP)
• More Economical: Lower charge quantities required
• Future-Proof: Compliant with latest environmental regulations

Intuitive Touch Screen Controller 🖥️

Easy-to-Use Fixed Control Panel

The built-in touch controller features:

🌈 Color-Coded LED Indicators

• Green LED: Target temperature reached – heat pump in standby
• Blue LED: Heating mode active – water being heated
• Red LED: System error or out of service

📊 Clear Display Shows:

• Current pool water temperature
• Target set-point temperature
• Current air temperature
• Operating mode
• System status
• WiFi connection status

⏰ Built-In Programming Set up to 3 different on/off schedules directly from the controller. Perfect for coordinating with off-peak electricity rates or filtration schedules.

🔒 Child Lock Function Lock the control panel to prevent accidental changes—especially useful in public or family pool settings.

💰 Running Cost Comparison

Understanding your heat pump’s efficiency helps you make informed decisions. Here’s how the Vertigo Fi 155T compares to alternative heating methods:

Cost per kWh of Heat Generated

Based on UK average electricity rate of £0.24/kWh and COP of 7.5 at standard conditions

Heating Method	Energy Input	Heat Output	Cost per kWh Heat	Relative Cost
Poolex Vertigo Fi 155T	1 kWh electricity	7.5 kWh heat	£0.032	1x (baseline)
Electric Resistance Heater	1 kWh electricity	1 kWh heat	£0.24	7.5x more expensive
Oil Boiler (85% efficient)	1 kWh oil	0.85 kWh heat	£0.08*	2.5x more expensive
Gas Boiler (90% efficient)	1 kWh gas	0.9 kWh heat	£0.06*	1.9x more expensive

*Oil and gas costs vary significantly by region and supplier

Example: Maintaining 80m³ Pool at 28°C

Scenario: Spring/autumn shoulder season, average air temperature 15°C, pool covered at night

Estimated monthly running costs:

Heating Method	Estimated Monthly Cost
Poolex Vertigo Fi 155T	£45 – £75
Electric Resistance Heater	£340 – £560
Gas Boiler	£85 – £140

Annual Savings vs Electric Heater: £2,500 – £4,800 Payback Period: Typically 2-3 years

🔧 Installation Requirements & Guidelines

Clearance Requirements

Proper airflow is essential for optimal performance:

Location	Minimum Clearance
Front (Air Intake)	500mm (0.5m)
Left Side	500mm (0.5m)
Right Side	500mm (0.5m)
Rear	500mm (0.5m)
Above Unit	2,500mm (2.5m) – no obstacles

Note: The vertical design with upward discharge means you can position the unit closer to walls than traditional horizontal models, but maintain the specified side clearances for service access.

Ideal Installation Location ✅

DO:

• Install on firm, level ground (concrete base recommended)
• Position in well-ventilated area with good air circulation
• Keep away from heat sources, direct sunlight where possible
• Ensure easy access for maintenance and servicing
• Install on anti-vibration pads (included) to minimize noise transmission
• Position away from bedroom windows and neighbor boundaries

DON’T:

• Install in enclosed spaces or rooms without adequate ventilation
• Position where air discharge could create recirculation
• Place near flammable materials or substances
• Install on soft ground that could settle or become uneven
• Block air intake or discharge with plants, fences, or structures

Hydraulic Connection Requirements

Bypass System (Mandatory) The heat pump must be connected via a 3-valve bypass system to allow:

• Flow rate adjustment for optimal performance
• Isolation for maintenance without system shutdown
• Proper hydraulic balancing

Water Flow Rate: 6.7 m³/hour Connection Size: 50mm PVC (adapters included) Pressure Loss: 1.1 mCE

Treatment System Position: ⚠️ Critical: All water treatment systems (chlorine dosing, pH control, salt chlorinators) must be installed AFTER the heat pump in the hydraulic circuit to prevent corrosion.

Electrical Installation Requirements ⚡

Professional Installation Required

The Vertigo Fi 155T three-phase model requires qualified electrician installation:

Power Supply: 380-415V / 3-Phase / Neutral / 50Hz Maximum Current: 8.58A Circuit Protection: 10A Type D MCB (Curve D) Cable Specification: RO2V 5 x 2.5 mm² (for runs up to 10m) RCD Protection: 30mA differential switch (upstream)

Phase Sequence Important: ⚠️ Three-phase connections must have correct phase sequence or the compressor will not operate. Professional verification required.

Optional Pump Control: Terminals P1 and P2 allow connection of a circulation pump (max 1000W / 5A). For higher power pumps, use an external power relay.

🛡️ Industry-Leading Warranty Coverage

Poolex demonstrates confidence in the Vertigo Fi’s quality with comprehensive warranty protection:

Warranty Terms

Component	Warranty Period	Coverage
Complete Heat Pump	3 Years	Parts and manufacturing defects
Compressor	7 Years	Extended compressor protection
Titanium Heat Exchanger	15 Years	Chemical corrosion resistance
Electronics	4 Years	Control boards and modules

What’s Covered

✅ Manufacturing defects in materials or workmanship ✅ Compressor failure under normal operating conditions ✅ Heat exchanger corrosion (excluding freeze damage) ✅ Electronic control system faults ✅ Structural defects in heat pump housing

Warranty Conditions

⚠️ Warranty requires:

• Professional installation by qualified technician
• Installation in accordance with manufacturer guidelines
• Proper water chemistry maintenance (pH 6.9-8.0)
• Appropriate winterization in freezing climates
• Use of genuine Poolex replacement parts

📦 What’s Included in the Box

Your Poolex Vertigo Fi 155T package contains everything needed for installation:

✅ Vertigo Fi 155T Heat Pump Unit ✅ 2 x 50mm PVC Hydraulic Connectors (inlet and outlet) ✅ 4 x Anti-Vibration Mounting Pads (reduces noise transmission) ✅ Condensate Drainage Kit (channels condensation water) ✅ Winter Storage Cover (isothermal protective cover) ✅ Installation & User Manual (comprehensive 43-page guide) ✅ Warranty Registration Card

Not Included (Required for Installation):

• Hydraulic bypass kit with 3 valves
• PVC piping and fittings
• Electrical supply cable (RO2V 5 x 2.5mm²)
• Circuit protection (10A Type D MCB)
• Mounting hardware for pad fixation

❓ Frequently Asked Questions

General Operation

Q: How long does it take to heat my pool? A: Heat-up time depends on pool volume, starting temperature, and ambient conditions. As a general guide, expect 1-2°C temperature rise per day under typical conditions. For a 90m³ pool heating from 15°C to 25°C, allow approximately 5-7 days with continuous operation. Using a pool cover can reduce this by 30-50%.

Q: Can the heat pump heat and cool my pool? A: Yes! The Vertigo Fi 155T is fully reversible with dedicated cooling mode. This is particularly useful in hot climates where water temperatures can exceed comfortable swimming levels (28-30°C). The cooling function also helps control algae growth in very warm water.

Q: What’s the difference between Boost, Eco, and Silent modes? A:

• Boost Mode: Runs at maximum capacity (21.2kW) for fastest heating. Use for initial heat-up or rapid temperature recovery.
• Inverter Mode: Variable power operation, automatically adjusting between 4-21kW for optimal efficiency. Best for daily use.
• Silent Mode: Operates at reduced speed for ultra-quiet operation (24 dB at 10m). Perfect for evening use or noise-sensitive installations.

Q: Will it work in winter? A: The Vertigo Fi 155T operates down to -10°C air temperature with automatic defrost protection. However, efficiency decreases as temperature drops. At 0°C ambient, expect about 40-50% of rated capacity. For extended season use (October-May in UK), a pool cover is essential.

Energy Efficiency & Costs

Q: How much does it cost to run? A: Running costs depend on pool size, target temperature, ambient conditions, and electricity rates. For an 80m³ pool maintained at 28°C during spring/autumn (15°C average air temp), expect £45-75 monthly with a cover. Summer maintenance costs (20°C+ air temp) drop to £20-35 monthly.

Q: What does COP mean and why does it matter? A: COP (Coefficient of Performance) measures efficiency—how much heat energy you get per unit of electricity consumed. A COP of 7.5 means you get 7.5kW of heat for every 1kW of electricity used. Higher COP = lower running costs. The Vertigo Fi’s maximum COP of 15.23 is exceptional.

Q: How does inverter technology save energy? A: Traditional on/off heat pumps constantly cycle between full power and complete shutdown, wasting energy during startup and creating consumption spikes. Inverter technology runs continuously at variable power, matching output to demand. This eliminates wasteful cycling, reduces electricity peaks, and cuts energy consumption by up to 35%.

Installation & Setup

Q: Can I install this myself? A: Hydraulic connections can be performed by competent DIYers, but electrical installation MUST be performed by a qualified electrician due to three-phase requirements and regulatory compliance. We strongly recommend professional installation of the complete system to ensure optimal performance and warranty coverage.

Q: Do I need a three-phase electrical supply? A: Yes, the 155T model requires 380-415V three-phase power. If you only have single-phase supply, consider the single-phase Vertigo Fi 155 model (21.3kW, 230V) as an alternative. Check your property’s electrical supply before ordering.

Q: Will it work with my existing pool equipment? A: Yes! The Vertigo Fi integrates with standard pool systems. It must be installed in the return line BEFORE any chemical treatment systems (chlorinators, dosing pumps). It’s compatible with all pool types (concrete, vinyl, fiberglass) and treatment methods (chlorine, saltwater, bromine, UV, ozone).

Q: Can I control my pool pump through the heat pump? A: Yes, terminals P1/P2 provide pump control for circulation pumps up to 1000W (5A). For larger pumps, use an external power relay. This allows the filtration pump to automatically run whenever the heat pump operates, ensuring proper water flow.

WiFi & Smart Control

Q: How do I set up the WiFi connection? A: Download the free “Smart Life” app, create an account, then press and hold the WiFi and Mode buttons on the controller for 3 seconds to enter pairing mode. The app will guide you through connecting the heat pump to your 2.4GHz WiFi network. Full setup instructions are in the manual.

Q: Can I control it when I’m not at home? A: Absolutely! Once connected to WiFi, you can control your heat pump from anywhere with internet access. Adjust temperature, change modes, view status, and set schedules remotely through the Smart Life smartphone app.

Q: Does it work with Alexa or Google Home? A: Yes, the Smart Life platform integrates with Amazon Alexa and Google Home for voice control in supported regions. You can use voice commands to adjust temperature and turn the heat pump on/off.

Maintenance & Troubleshooting

Q: How much maintenance is required? A: Minimal! Monthly: Check and clean pool filter to ensure proper water flow. Quarterly: Clean evaporator fins with soft brush (unit off). Annually: Professional service check including refrigerant pressure test, electrical connections check, and general inspection.

Q: Do I need to winterize the heat pump? A: If ambient temperatures will remain above 3°C, no winterization is needed. For freezing climates, drain all water from the heat exchanger, disconnect power, and fit the included winter cover. The built-in antifreeze protection will protect the unit when powered if temperatures only occasionally drop to freezing.

Q: What happens if there’s an error code? A: The controller displays error codes (E01-E56) to diagnose issues. Common codes include E05 (insufficient water flow—check filter and valves) and E06 (low refrigerant pressure—call service). The manual includes a complete error code table with solutions. Most issues are related to water flow or power supply.

Q: Why is my heat pump not heating as fast as expected? A: Several factors affect heating rate:

• Pool not covered (heat loss through evaporation)
• Low ambient temperature (reduced capacity)
• Inadequate water flow (check filter, valves)
• Bypass valves incorrectly adjusted
• Initial heat-up always takes longer (allow 5-7 days for first-time heating)

Product Comparison

Q: Should I choose the 155 (single-phase) or 155T (three-phase)? A: Both models provide similar 21.2kW heating capacity. Choose based on your electrical supply:

• 155T (Three-Phase): Lower current draw per phase (8.58A), more balanced load, typically lower running costs with three-phase tariffs, required for commercial installations
• 155 (Single-Phase): Easier installation if three-phase unavailable, higher current draw (21.3A), suitable for residential installations with appropriate supply

Q: How does this compare to gas pool heaters? A: Heat pumps are 3-5x more energy efficient than gas heaters, with much lower running costs. However, gas heaters heat water faster (useful for occasional pool use) and aren’t affected by air temperature. For regular swimming and extended seasons, heat pumps offer far superior economics. For occasional weekend use, gas might be more practical.

Q: What size heat pump do I need for my pool? A: The Vertigo Fi 155T suits 80-115m³ pools (with cover). Factors affecting sizing:

• Climate: Colder regions need more capacity
• Pool Cover: Dramatically reduces requirement (essential!)
• Shelter: Exposed pools lose more heat
• Swimming Season: Longer seasons need higher capacity
• Desired Temperature: Higher temps need more power

For borderline cases, slightly oversizing is better—the inverter technology means the unit will simply run at lower power, maintaining efficiency while ensuring adequate heating capacity during cold snaps.

🌍 Environmental Benefits & R32 Refrigerant

Why R32 is the Future of Pool Heating

The Poolex Vertigo Fi 155T uses R32 refrigerant, representing a significant advancement in environmental responsibility:

🌱 67% Lower Global Warming Potential R32 has a GWP of just 675 compared to R410A’s 2,088. This means substantially lower environmental impact throughout the unit’s lifecycle.

⚡ Higher Efficiency Superior thermodynamic properties deliver better heat transfer efficiency, translating to lower energy consumption and running costs.

♻️ Easier to Recycle As a pure refrigerant rather than a blend, R32 can be more easily reclaimed and recycled at end-of-life.

📜 Future-Proof Complies with latest F-Gas regulations and is approved for long-term use under European environmental legislation.

💧 Lower Charge Volumes Requires approximately 30% less refrigerant charge than R410A systems, further reducing environmental impact.

Energy Efficiency Contribution

By extracting up to 94% of its heat energy from renewable ambient air, the Vertigo Fi 155T dramatically reduces your carbon footprint compared to fossil fuel heating:

CO₂ Savings vs Gas Heating: ~3-4 tonnes annually (typical 90m³ pool) CO₂ Savings vs Electric Resistance: ~5-6 tonnes annually Renewable Energy Percentage: 75-80% (with typical COP of 5-6)

🎯 Perfect For These Applications

Residential Pools

• In-Ground Pools: 80-115m³ capacity
• Above-Ground Pools: 70-100m³ capacity
• Lap Pools: Extended swimming season
• Family Pools: Reliable, comfortable temperatures
• Holiday Homes: WiFi control for remote management

Commercial Installations

• Small Hotel Pools: Guest comfort guaranteed
• Health Club Pools: Consistent temperature maintenance
• Swim Schools: Reliable year-round operation
• Holiday Parks: Multiple unit installations possible
• Airbnb Properties: Remote temperature control

Special Requirements

• Noise-Sensitive Locations: Ultra-quiet Silent mode
• Confined Spaces: Compact vertical design
• Cold Climates: Operates to -10°C
• Long Swimming Season: Extended spring/autumn use
• Energy Efficiency Priority: Exceptional COP values

✨ Why Buy from HeatPumps4Pools?

Expert Advice & Support Our team specializes in pool heating solutions. We’ll help you choose the right model, provide installation guidance, and offer ongoing technical support.

Competitive Pricing We offer excellent value on premium pool heat pumps with transparent pricing—no hidden costs or unexpected charges.

Fast UK Delivery Orders typically ship within 1-3 working days to UK mainland addresses. We can also arrange international shipping—contact us for quotes.

Quality Assurance All heat pumps are factory-tested and come with full manufacturer warranty. We only supply genuine Poolex products.

Installation Support While we don’t install directly, we can recommend qualified installers in your area and provide technical installation support.

After-Sales Service Our support doesn’t end with the sale. We’re here to help with setup, troubleshooting, and maintenance questions throughout your heat pump’s lifetime.

🛒 Ready to Transform Your Pool Experience?

The Poolex Vertigo Fi 155T represents the perfect balance of power, efficiency, and smart technology. With industry-leading warranties, exceptional energy savings, and the convenience of WiFi control, this is the heat pump that will revolutionize your swimming season.

Order now and enjoy: ✅ Extended swimming season (March-November or year-round in mild climates) ✅ Up to 35% lower energy costs vs traditional heat pumps ✅ Whisper-quiet operation that won’t disturb your relaxation ✅ Control from anywhere via smartphone app ✅ 7-year compressor warranty for complete peace of mind ✅ Professional-grade performance with residential ease-of-use