🌊 Poolex SilverLine Top 120 Full Inverter Pool Heat Pump – 12kW with WiFi Control

Smart, Silent, and Energy-Efficient Pool Heating & Cooling for Year-Round Comfort

Transform your swimming experience with the Poolex SilverLine Top 120 – a premium 12.05kW full inverter heat pump that combines cutting-edge technology with exceptional efficiency. Designed for medium to large pools (50-70m³), this intelligent heating solution delivers powerful performance while reducing your energy bills by up to 35% annually.

Whether you’re extending your swimming season through cooler months or maintaining the perfect temperature all year round, the SilverLine Top 120 works reliably in temperatures as low as -15°C. Control everything from your smartphone with built-in WiFi connectivity, and enjoy whisper-quiet operation that won’t disturb your outdoor living space.

Why Choose the SilverLine Top 120?

✅ Save Money on Running Costs – Full inverter technology reduces energy consumption by 30-35% compared to traditional on/off heat pumps, delivering over 7 units of heat for every unit of electricity used (SCOP Class A rating)

✅ Heat Your Pool Faster – 12.05kW heating capacity provides rapid temperature increases, getting your pool ready when you want to swim

✅ Control from Anywhere – Built-in WiFi with the Poolex app (iOS & Android) lets you monitor water temperature, adjust settings, and switch modes remotely

✅ Whisper-Quiet Operation – Vertical fan design and optimized airflow produce just 52dB at 1 meter (38dB at 10 meters) – quieter than normal conversation

✅ Space-Saving Vertical Design – Upward air discharge reduces ground footprint and noise impact while providing discreet integration into your pool area

✅ Built to Last – Premium aluminium casing, corrosion-resistant Twisted Tech© titanium heat exchanger with salt and chlorine resistance, backed by extensive warranties

✅ Year-Round Performance – Operates reliably from -15°C to +45°C ambient temperature, with both heating and cooling functions

✅ Eco-Friendly Technology – Uses R32 refrigerant (lower global warming potential) and achieves maximum COP of 10.94 for outstanding environmental credentials

📊 Complete Technical Specifications

Heating Performance & Efficiency

Specification	Value	What This Means for You
Recommended Pool Volume	50 – 70 m³	Perfect for pools up to 70,000 litres
Max. Heating Capacity (A26/W26)	12.05 kW	Powerful heating even on warmer days
Max. Heating Capacity (A15/W26)	8.86 kW	Reliable performance in cooler weather
COP (A26/W26)	6.15 – 10.94	Produces up to 10.94 units of heat per unit of electricity
COP (A15/W26)	4.79 – 7.08	Maintains excellent efficiency in lower temperatures
SCOP Rating	7.42 (Class A)	Top-tier seasonal efficiency for maximum savings
Operating Temperature Range	-15°C to +45°C	Works through cold winters and hot summers
Heating Temperature Range	15°C – 40°C	Wide control range for perfect comfort

Electrical Requirements

Specification	Value
Power Supply	230V Single Phase (220-240V / 50Hz)
Power Input (A26/W26)	0.32 – 1.96 kW
Power Input (A15/W26)	0.38 – 1.85 kW
Maximum Power Input	2.8 kW
Recommended Fuse (Type C MCB)	12A
Connection	Standard household single-phase supply

⚠️ Professional electrical installation required by qualified electrician

Noise Levels & Comfort

Distance	Noise Level	Comparable To
1 meter	52 dB(A)	Quiet conversation
10 meters	38 dB(A)	Whisper or quiet library

The vertical fan design directs sound upward, further reducing noise impact at ground level

Physical Specifications

Specification	Value
Dimensions (L × W × H)	750 × 700 × 775 mm
Net Weight	58 kg
Gross Weight (Shipping)	69 kg
Fan Direction	Vertical (upward discharge)
Casing Material	Premium aluminium with modern finish

Hydraulic Connections

Specification	Value
Water Connections	1½” Female Thread / 50mm Glue Union
Nominal Flow Rate	4.0 m³/h
Heat Exchanger	Twisted Tech© Titanium (50mm)
Corrosion Resistance	Salt & chlorine resistant

Refrigeration System

Specification	Value
Refrigerant Type	R32 (eco-friendly, low GWP)
Refrigerant Charge	1000g
Compressor Type	Simple Rotary
Compressor Brand	GMCC (premium quality)

Smart Control Features

Feature	Details
WiFi Connectivity	Built-in (requires network with adequate signal)
Mobile App	Poolex App for iOS and Android
Operating Modes	Heating / Cooling / Auto / Boost / Eco / Silent
Remote Functions	Temperature monitoring, mode selection, on/off control, timer programming

🔥 Pool Heating Performance Guide

Estimated Heat-Up Times

Understanding how quickly your pool will heat helps you plan usage and manage expectations. The table below shows estimated times to heat various pool volumes using the SilverLine Top 120.

Formula Used: Time (hours) = (Pool Volume m³ × Temperature Rise °C × 1.16) ÷ 12.05 kW

Heating Time Estimates for Common Pool Sizes

Pool Volume	From 15°C to 25°C (10°C rise)	From 20°C to 28°C (8°C rise)	From 10°C to 25°C (15°C rise)
40 m³	38 hours	31 hours	58 hours
50 m³	48 hours	39 hours	72 hours
60 m³	58 hours	46 hours	87 hours
70 m³	67 hours	54 hours	101 hours

💡 Important Notes About Heat-Up Times:

• These are theoretical estimates under ideal conditions (A15/W26 ambient/water temperature)
• Actual times vary based on: ambient air temperature, pool insulation, wind exposure, humidity, and whether you use a pool cover
• Using a pool cover when not swimming can reduce heat-up time by 40-50% by preventing heat loss
• Heat-up is faster in warmer weather (higher ambient temperatures improve heat pump efficiency)
• Once at temperature, maintaining heat requires much less energy than initial heating

Pool Size Compatibility Guide

Your Pool Volume	SilverLine Top 120 Suitability	Typical Pool Dimensions
Under 50 m³	✅ Excellent – will heat quickly	8m × 4m × 1.5m depth
50-60 m³	✅ Ideal match – balanced performance	10m × 4m × 1.5m depth
60-70 m³	✅ Recommended – suitable for this range	10m × 4.5m × 1.5m depth
Over 70 m³	⚠️ Consider larger model for faster heating	Pools larger than 70,000L

📄 Downloads & Documentation

Installation & User Manuals

Access comprehensive documentation for your Poolex SilverLine Top 120 heat pump below. We recommend downloading and reviewing these documents before installation.

📄 SilverLine Top Manual (opens in new tab) Complete installation and user manual for the SilverLine Top series. Includes detailed safety information, step-by-step installation instructions, electrical and hydraulic connection diagrams, operation guidelines, maintenance schedules, troubleshooting procedures, and warranty information. Essential reading for installers and owners.

📄 Poolex SilverLine Top Inverter Heat Pump Specifications (opens in new tab) Technical specification sheet containing detailed performance data, electrical requirements, dimensions, operating parameters, efficiency ratings (COP/SCOP), and compatibility information for the complete SilverLine Top range including the 120 model.

💡 We recommend downloading and reviewing the installation manual before installation, or providing it to your installer. The manual includes important safety information, electrical requirements, clearance specifications, and warranty details.

🎯 Top Features & Benefits

1. Full Inverter Technology – Save Up to 35% on Energy Costs

Unlike traditional on/off heat pumps that constantly cycle on and off, the SilverLine Top 120 uses advanced full inverter technology to continuously adjust compressor and fan speed. This means:

• Lower electricity bills – operates at exactly the power needed, no more, no less
• Consistent temperature – maintains your set temperature without fluctuations
• Longer equipment life – eliminates stress from constant on/off cycling
• Quieter operation – runs at lower speeds once temperature is reached
• Soft start technology – no power consumption spikes on startup

Real-world savings: Based on typical UK pool usage, Full Inverter technology can save £200-£400 annually compared to traditional heat pumps

2. SCOP Class A Efficiency – More Heat, Less Cost

The SilverLine Top 120 achieves a Seasonal Coefficient of Performance (SCOP) of 7.42, earning a Class A efficiency rating. What does this mean?

• For every 1 kWh of electricity consumed, you get 7.42 kWh of heat energy
• That’s over 85% free energy from the air
• Compare this to electric heaters (1:1 ratio) or gas heaters (0.85:1 ratio)
• Maximum COP reaches 10.94 in optimal conditions – among the highest available

💰 Running cost example: Heating a 60m³ pool for 6 months might cost approximately £300-£500 per season, compared to £2,000+ for electric heating or £800-£1,200 for gas

3. Smart WiFi Control – Manage Your Pool from Anywhere

Built-in WiFi connectivity transforms how you control your pool heating:

• Monitor in real-time – check current water temperature from anywhere
• Adjust remotely – change temperature settings before you get home
• Smart scheduling – program heating times to optimize energy usage
• Mode selection – switch between Heating, Cooling, Boost, Eco, Silent, and Auto modes
• iOS and Android compatible – free Poolex app available on both platforms

Perfect for: Pre-heating the pool before guests arrive, adjusting from work, or monitoring while on holiday

4. Whisper-Quiet Vertical Design

The innovative vertical fan configuration offers multiple benefits:

• Minimal noise pollution – only 52dB at 1 meter, 38dB at 10 meters
• Space-efficient – saves valuable ground space around your pool
• Reduced disturbance – airflow directed upward, not at ground level
• Neighbor-friendly – exceptionally quiet operation won’t cause complaints
• Better aesthetics – compact footprint blends into pool area

The 38dB noise level at 10 meters is quieter than a quiet library and barely noticeable

5. All-Weather Performance – Works Down to -15°C

Extend your swimming season and enjoy reliable heating year-round:

• Operates from -15°C to +45°C ambient temperature
• Maintains efficiency in cooler conditions (COP 4.79-7.08 at A15/W26)
• Heating AND cooling functions for complete climate control
• Anti-freeze protection built into the system
• Reliable in British climate – designed for variable weather conditions

This means you can heat your pool from early spring through late autumn, and even in mild winter conditions

6. Premium Build Quality & Durability

Engineered for long-term reliability in challenging pool environments:

• Aluminium casing – premium durability with modern aesthetic finish
• Twisted Tech© Titanium heat exchanger – superior corrosion resistance
• Salt and chlorine resistant – compatible with all pool treatment systems
• GMCC compressor – trusted brand known for reliability
• R32 refrigerant – eco-friendly with lower environmental impact
• Weather-resistant design – suitable for year-round outdoor installation

7. Comprehensive Warranty Protection

Your investment is protected with extensive manufacturer warranties:

• 3 years full unit warranty
• 5 years compressor warranty (parts only after year 3)
• 10 years titanium heat exchanger warranty (parts only after year 3)

💡 Operating Modes Explained

The SilverLine Top 120 offers multiple operating modes to suit different situations:

🚀 Boost Mode

For rapid heating when you need fast results

• Runs at maximum capacity for fastest temperature increase
• Ideal for initial pool heating or after periods of non-use
• Higher power consumption, but gets pool ready quickly

🌿 Eco Mode

For efficient, economical day-to-day operation

• Optimizes efficiency while maintaining temperature
• Best for regular use once pool is at target temperature
• Balances performance with energy savings

🔇 Silent Mode

For ultra-quiet operation when noise matters

• Reduces fan and compressor speed for minimal sound
• Perfect for evening use or noise-sensitive environments
• Slightly longer heating times, but whisper-quiet

🤖 Auto Mode

Let the heat pump decide the best settings

• Automatically adjusts operation based on conditions
• Switches between modes to optimize efficiency
• Maintains set temperature with minimal intervention

❄️ Cooling Mode

For hot summer days when pool temperature gets too high

• Actively cools pool water to comfortable swimming temperature
• Prevents algae growth in overheated pools
• Particularly useful for above-ground pools

🏊 Real-World Usage Scenarios

Scenario 1: Spring Pool Opening

Situation: Your pool has been covered all winter, water temperature is 12°C, you want it at 26°C for the Easter weekend (2 weeks away)

Solution: Start the SilverLine Top 120 in Boost mode. For a 60m³ pool needing a 14°C rise, expect approximately 80-85 hours of running time. Spread over 14 days = 6 hours per day. Switch to Eco mode once temperature reached.

Estimated running cost: Approximately £30-£45 for initial heat-up

Scenario 2: Summer Maintenance

Situation: Pool is at 26°C, you want to maintain this through summer, occasional use 3-4 times per week

Solution: Run in Auto or Eco mode. The heat pump will cycle as needed to maintain temperature, compensating for heat loss from evaporation and night-time cooling. With a pool cover, expect 2-4 hours running per day.

Estimated running cost: Approximately £50-£80 per month

Scenario 3: Extending the Season

Situation: It’s October, ambient temperature around 12-15°C, you want to keep swimming as long as possible

Solution: The SilverLine Top 120 excels in this scenario. It maintains efficiency down to -15°C. Keep pool covered when not in use, run in Eco mode to maintain 26-28°C. Expect 4-6 hours running per day.

Estimated running cost: Approximately £60-£100 per month

🔧 Installation Requirements

Location Guidelines

Clearance Requirements:

• Front (air intake): Minimum 500mm clear space
• Rear (vertical discharge): Minimum 2000mm to any obstruction (ensure vertical airflow is unobstructed)
• Sides: Minimum 300mm each side for service access
• Base: Level, solid surface capable of supporting 69kg

Optimal Placement:

• Install in a well-ventilated area with good air circulation
• Avoid enclosed spaces or areas with restricted airflow
• Position where vertical air discharge won’t affect neighbors
• Protect from direct exposure to sprinkler systems
• Locate within reasonable distance of pool equipment
• Ensure adequate drainage around unit base

Electrical Installation

⚠️ Must be installed by qualified electrician

Requirements:

• 230V single-phase supply (220-240V / 50Hz)
• Dedicated circuit recommended
• Type C MCB circuit breaker: 12A minimum
• Cable size: Suitable for 2.8kW maximum load (typically 2.5mm² over distances up to 30m)
• RCD protection (30mA) recommended for additional safety
• Weatherproof electrical connection point

Hydraulic Installation

Connections:

• 1½” female thread or 50mm glue union connections
• Install after pool filter, before chemical treatment system
• Flow rate required: 4.0 m³/h (ensure pump provides adequate flow)
• Include isolation valves for servicing
• Install pressure gauge to monitor flow
• By-pass recommended for easy servicing

Important: Heat pump must be installed at or above water line, or use anti-syphon valves to prevent back-flow

❓ Frequently Asked Questions

Q1: How much will it cost to run the SilverLine Top 120?

A: Running costs depend on pool size, desired temperature, ambient conditions, and whether you use a pool cover. As a rough guide:

• Initial heat-up (cold pool): £30-£60 depending on temperature rise needed
• Summer maintenance (with cover): £50-£80 per month
• Spring/Autumn use: £60-£100 per month
• Annual cost (May-September): £250-£500 typically

The Full Inverter technology reduces costs by 30-35% compared to traditional heat pumps. Using a pool cover when not swimming can reduce running costs by 40-50%.

Based on average UK electricity rates of £0.24-£0.28 per kWh (2024/2025)

Q2: Will this heat pump work with my pool size?

A: The SilverLine Top 120 is optimized for pools between 50-70m³ (50,000-70,000 litres).

• Under 50m³: Will work excellently and heat faster than estimated
• 50-70m³: Perfect match – designed for this range
• Over 70m³: Will work but may take longer to heat; consider the Top 150 or Top 200 model for better performance

To calculate your pool volume: Length (m) × Width (m) × Average Depth (m) = Volume (m³)

Example: 10m × 4m × 1.5m = 60m³

Q3: Can I use this with a salt water pool or chlorine?

A: Yes, absolutely! The SilverLine Top 120 features a Twisted Tech© titanium heat exchanger specifically designed for corrosion resistance. It’s compatible with:

• Salt water chlorination systems
• Chlorine treatment
• Bromine treatment
• Mineral systems
• All standard pool treatment methods

Important: Always install the heat pump BEFORE any chemical dosing equipment in your plumbing line.

Q4: How noisy is it? Will it disturb my neighbors?

A: The SilverLine Top 120 is exceptionally quiet:

• 52dB at 1 meter – similar to quiet conversation
• 38dB at 10 meters – quieter than a library

The vertical fan design directs sound upward, minimizing noise at ground level. The Silent mode reduces noise even further. Most users report that it’s barely noticeable, especially compared to traditional heat pumps. The full inverter technology also means it runs at lower speeds once your pool is at temperature, making it even quieter during normal operation.

Q5: How long does it take to heat my pool?

A: This depends on several factors: pool volume, current temperature, target temperature, ambient air temperature, and whether you use a pool cover.

Example (60m³ pool):

• From 15°C to 25°C (10°C rise): approximately 58 hours
• From 20°C to 28°C (8°C rise): approximately 46 hours

Tips to reduce heating time:

• Use a pool cover when not swimming (reduces time by 40-50%)
• Heat gradually over several days rather than rushing
• Use Boost mode for faster initial heating
• Start heating before you need the pool

Remember: Once at temperature, maintaining heat requires much less energy than initial heating.

Q6: Can I control it from my smartphone?

A: Yes! The SilverLine Top 120 has built-in WiFi and works with the free Poolex app (available for iOS and Android). You can:

• Monitor current pool water temperature
• Adjust target temperature
• Switch between heating and cooling modes
• Select operating modes (Boost, Eco, Silent, Auto)
• Turn the heat pump on or off
• Set timer schedules
• Receive alerts and notifications

You’ll need a WiFi network with adequate signal strength at the heat pump location.

Q7: What’s the difference between COP and SCOP?

A:

• COP (Coefficient of Performance) is an efficiency measure at a specific temperature condition. The SilverLine Top 120 achieves COP 6.15-10.94 at A26/W26 (26°C air, 26°C water).
• SCOP (Seasonal COP) is an average efficiency measure across a whole season, accounting for varying temperatures. The SCOP of 7.42 means over an entire season, you get 7.42 units of heat for every 1 unit of electricity – this is a Class A rating, the highest efficiency classification.

Why it matters: SCOP gives you a more realistic picture of year-round efficiency and running costs.

Q8: Will this work in winter/cold weather?

A: Yes! The SilverLine Top 120 operates reliably down to -15°C ambient temperature.

However, efficiency does decrease in colder conditions:

• At 26°C ambient: COP 6.15-10.94 (maximum efficiency)
• At 15°C ambient: COP 4.79-7.08 (still excellent efficiency)

This makes it perfect for extending your swimming season into spring and autumn. Even at 10°C ambient temperature, it still provides 4-5 units of heat per unit of electricity – far better than electric or gas heaters.

Winter tip: When not in use during winter, use the included isothermal winter cover to protect the unit.

Q9: Do I need to run my pool filter pump while the heat pump is operating?

A: Yes, the pool filtration pump must be running when the heat pump operates – the heat pump needs water flow to transfer heat. The SilverLine Top 120 requires a flow rate of 4.0m³/h.

Many pool owners install a timer system that coordinates the filter pump and heat pump operation, or use the heat pump’s built-in controls if interfaced with the filtration system.

Q10: What’s included in the warranty?

A: The SilverLine Top 120 comes with comprehensive warranty coverage:

• Unit warranty: 3 years full coverage
• Compressor warranty: 5 years (full coverage first 3 years, parts only years 4-5)
• Titanium heat exchanger: 10 years against corrosion (full coverage first 3 years, parts only years 4-10)

Important: Warranty requires:

• Installation by qualified professionals
• Proper electrical and hydraulic installation per manual guidelines
• Use with appropriate water chemistry (pH 6.9-7.6)
• Registration of product with Poolex (check with retailer for details)

Q11: Is professional installation required?

A: Electrical installation must be carried out by a qualified electrician – this is a legal requirement in the UK and necessary for safety and warranty coverage.

Hydraulic installation (plumbing) can be done by a competent DIYer with good plumbing skills, though professional installation is recommended for optimal performance and warranty protection.

What’s involved:

• Electrical: Dedicated circuit, appropriate MCB, RCD protection
• Hydraulic: Cutting into pipework, fitting unions/valves, testing for leaks
• Positioning: Creating level base, ensuring clearances met
• Commissioning: Testing operation, checking flow rates, setting parameters

Many retailers offer installation services – we recommend getting quotes from experienced pool equipment installers.

Q12: Can this cool my pool in summer?

A: Yes! The SilverLine Top 120 has a cooling function as well as heating. This is particularly useful for:

• Above-ground pools that heat up quickly in summer sun
• Preventing pool water from exceeding comfortable swimming temperatures
• Reducing algae growth risk in very warm water
• Maintaining optimal water temperature in hot weather

Cooling range: 10-30°C This feature is controlled through the same app and control panel as heating.

🎯 Who Is This Heat Pump Perfect For?

✅ Pool owners with 50-70m³ pools looking for efficient heating

✅ Anyone wanting to extend their swimming season into spring and autumn

✅ Homeowners seeking energy savings and lower running costs

✅ Tech-savvy users who want smartphone control and monitoring

✅ Those with noise-sensitive neighbors requiring quiet operation

✅ Environmentally conscious buyers wanting eco-friendly pool heating

✅ People with above-ground pools needing both heating and cooling

✅ Anyone upgrading from older, inefficient pool heating systems

🌍 Environmental Benefits

Choosing the SilverLine Top 120 is better for the environment:

♻️ Up to 85% renewable energy – extracts free heat from ambient air

🌱 Low carbon footprint – produces 7.42 units of heat per 1 unit of electricity (far better than gas or electric heaters)

💚 R32 refrigerant – lower Global Warming Potential (GWP) than older refrigerants

⚡ Reduced electricity consumption – Full Inverter technology cuts energy use by 30-35%

🔋 Grid-friendly operation – soft start technology avoids power spikes

🌡️ Efficient heat transfer – titanium heat exchanger maximizes thermal efficiency

By choosing an efficient heat pump over electric or gas heating, you could reduce your pool’s carbon footprint by 60-75%

📦 What’s Included

When you purchase the Poolex SilverLine Top 120, you receive:

✅ SilverLine Top 120 heat pump unit ✅ 2× hydraulic connectors (50mm diameter for inlet/outlet) ✅ WiFi connectivity (built-in) ✅ Isothermal winter storage cover ✅ 4× anti-vibration mounting pads ✅ Condensation drainage kit ✅ Installation and user manual ✅ Warranty registration information

Not included (required for installation):

• Electrical cable and circuit protection
• Isolation valves and additional plumbing fittings
• Concrete pad or mounting base (if required)

🔄 Comparison: Why Inverter Technology Matters

Traditional On/Off Heat Pump:

• ❌ Runs at full power, then shuts off completely
• ❌ Frequent on/off cycling
• ❌ Power consumption spikes on startup
• ❌ Temperature fluctuations
• ❌ Shorter equipment lifespan
• ❌ Noisier operation

SilverLine Top 120 Full Inverter:

• ✅ Continuously adjusts power to exact needs
• ✅ Smooth, consistent operation
• ✅ Soft start – no power spikes
• ✅ Stable water temperature
• ✅ 30-35% energy savings
• ✅ Longer equipment life
• ✅ Quieter, especially once at temperature

The technology difference translates directly to lower bills, better comfort, and longer equipment life

💰 Return on Investment

While heat pumps have a higher upfront cost than gas or electric heaters, the running cost savings mean they pay for themselves over time:

Running Cost Comparison (6-month swimming season, 60m³ pool):

Heating Method	Approximate Season Cost
Electric Heater (3kW)	£2,000 – £2,500
Gas Heater	£800 – £1,200
Standard On/Off Heat Pump	£500 – £700
SilverLine Top 120 Inverter	£300 – £500

Payback Period: Compared to electric heating: 1-2 seasons Compared to gas heating: 2-3 seasons Compared to standard heat pump: 3-5 seasons

Plus: Increased property value, extended swimming season, and environmental benefits

🛠️ Maintenance & Care

The SilverLine Top 120 requires minimal maintenance:

Monthly:

• Visual inspection for debris around air intake
• Check that fan spins freely
• Verify water flow is adequate
• Clean filter before heat pump if needed

Seasonally:

• Clean air intake grilles with soft brush or cloth
• Check refrigerant connections for any signs of leakage
• Inspect hydraulic connections for leaks
• Test WiFi connectivity and app functionality

Annually:

• Professional service recommended
• Check refrigerant charge (if needed)
• Inspect electrical connections
• Test safety systems
• Clean titanium heat exchanger (if needed)

Winter Storage:

• Drain water from heat exchanger if temperatures below freezing expected
• Use provided winter cover when not in use
• Keep unit powered for anti-freeze protection if plumbed in

The titanium heat exchanger is corrosion-resistant and requires minimal maintenance compared to other heat exchanger types

✅ Final Verdict: Is the SilverLine Top 120 Right for You?

You should choose the SilverLine Top 120 if:

✅ You have a pool between 50-70m³ (50,000-70,000 litres)

✅ You want to significantly reduce your pool heating costs

✅ You value quiet operation and discreet integration

✅ You want smartphone control and modern features

✅ You’re looking for year-round heating capability

✅ You want premium build quality with excellent warranties

✅ Environmental efficiency is important to you

✅ You want to extend your swimming season

Consider alternatives if:

❌ Your pool is significantly smaller than 50m³ (look at the Top 70 or Top 90)

❌ Your pool is larger than 70m³ (consider the Top 150 or Top 200)

❌ You need extremely rapid heating (consider a larger model or supplementary heating)

❌ You have very limited budget (though remember long-term running cost savings)

 

📞 Need Help Choosing?

Still have questions about whether the SilverLine Top 120 is right for your pool?

Consider these questions:

• What is your pool volume in m³ or litres?
• When do you want to use your pool (season/months)?
• What’s your current/desired pool temperature?
• Do you use a pool cover?
• What’s your budget for running costs?
• Do you have a suitable electrical supply?

Contact the team at Parts4Tubs for expert advice tailored to your specific pool and requirements

🌊 Ready to transform your swimming experience? Order your Poolex SilverLine Top 120 today and enjoy efficient, smart, year-round pool heating!

Note: All running costs are estimates based on average UK electricity prices (£0.24-£0.28/kWh) and typical usage patterns. Actual costs will vary based on your specific circumstances, pool size, ambient temperatures, usage patterns, and whether you use a pool cover. Heat-up time estimates are theoretical calculations under specific conditions and actual times may vary. Always consult the installation manual and have the unit installed by qualified professionals. This heat pump must be installed in accordance with local building regulations and electrical safety standards.