Perseus 460 Whirlpool Pump (Centre Suction)

Introduction

As a dedicated hot tub and spa enthusiast, I’m thrilled to introduce you to the Perseus 460 Whirlpool Pump with center suction. This pump is a true powerhouse that’s perfect for larger whirlpool baths and even some smaller hot tubs or spas. Let me share why I’m so excited about this pump and why it might be the perfect addition to your aquatic relaxation setup.

Key Features

1. Impressive Power Output

Don’t let its compact size fool you – this pump packs a serious punch. With a motor rated at 1.4kW and a total output of 1.2kW (equivalent to 1.61HP), it delivers robust performance for your whirlpool or spa needs. This high power ensures vigorous water circulation and jet action, giving you that invigorating massage-like experience you crave.

2. Near-Silent Operation

One of the things I love most about the Perseus range is its near-silent running during operation. Hydroair has clearly put a lot of thought into the design to minimize noise, allowing you to enjoy your relaxation time without any distracting pump sounds.

3. Versatile Application

Whether you have a luxurious whirlpool bath, a jetted tub, or a compact spa, the Perseus 460 is up to the task. Its powerful performance makes it ideal for larger whirlpool bath settings, but it’s also perfectly suited for smaller hot tubs and spas.

4. Efficient Performance

Operating at 230 volts and 50 Hz, it draws 6.2 amps and spins at a robust 2800 RPM. This high-speed operation ensures excellent water circulation and jet action, all while maintaining energy efficiency.

5. Easy Installation

The Perseus 460 comes with 1.5-inch plumbing connections, making it compatible with standard fittings. Plus, it’s equipped with a pre-attached plain cable, simplifying the electrical hookup process. This pump is designed with convenience in mind, whether you’re replacing an old pump or setting up a new system.

Technical Specifications

Specification	Detail
Manufacturer	Hydroair
Type	Whirlpool Bath, Jetted Tub, Spa Bath Pump
Power Reference	1.61 HP (output)
Voltage	230 V
Frequency	50 Hz
Motor Power	1.4 kW
Total Output	1.2 kW (1.61 HP)
Amperage	6.2 A
RPM	2800
Plumbing Connections	1.5 inch
Electrical Connections	Comes with plain cable attached
Dimensions (L x H x D)	335 mm x 210 mm x 175 mm

Documentation

• Manual
• Dimension drawing HA460

Performance and Applications

The Perseus 460 Whirlpool Pump, manufactured by Hydroair, is a high-performance solution designed to elevate your bathing experience. Its powerful output makes it suitable for a variety of applications, including:

1. Large whirlpool baths
2. Jetted tubs
3. Small to medium-sized hot tubs
4. Compact spas

The pump’s high-speed operation at 2800 RPM ensures excellent water circulation, creating a vigorous and invigorating hydromassage effect. This makes it perfect for those seeking a truly therapeutic and relaxing experience in their home spa setup.

Energy Efficiency

Despite its powerful performance, the Perseus 460 is designed with energy efficiency in mind. Its 230V operation and 6.2A current draw strike a balance between power and energy consumption, making it a responsible choice for eco-conscious spa owners.

Installation and Compatibility

The pump’s 1.5-inch plumbing connections ensure compatibility with most standard spa and whirlpool bath setups. The pre-attached plain cable simplifies electrical installation, making it an excellent choice for both DIY enthusiasts and professional installers.

A Word of Advice

It’s worth noting that the Perseus 460 is significantly stronger than your average whirlpool bath pump. If you’re considering it for an alternative setup or a custom project, I recommend checking the performance graphs first. Its robust output might be more than you need for some applications, and it’s always best to ensure you’re getting the right fit for your specific requirements.

Conclusion

The Perseus 460 Whirlpool Pump is perfect for those who want to take their relaxation to the next level. Whether you’re upgrading your current system or building something new, this pump offers the power, reliability, and quiet operation you need to create your own personal oasis.

As someone who’s passionate about creating the perfect spa experience, I can’t recommend the Perseus 460 enough. It’s a fantastic choice for anyone looking to enhance their whirlpool bath or spa setup with a truly powerful, yet quiet pump.

Have any questions about how the Perseus 460 might work in your setup? Need advice on installation or maintenance? Don’t hesitate to reach out – I’m always happy to share my knowledge and help fellow spa enthusiasts create their perfect relaxation space!

 

The hot tub indistry doesnt make it easy for you when you are trying to match up the size of the unions (the part that screws your pipe work onto the pumps) Below you can see the physical sizes of the collars, and how they relate to the actual union size you need. So a measurement of 2.5", edge to edge on the collar of the pump is actually a 1.5" union - confusing - absolutely! If you are not sure, give me a shout!

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.
2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)
3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.
4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.
5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.
6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.
7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.
8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.
9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.
10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.
11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.
12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.
13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.
14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.
15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.
2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.
3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.
4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.
5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.