Enhance Your Hot Tub Experience with the Balboa GS501Z + TS-VL404 Control System

Introduction

As an experienced hot tub parts supplier, I’m excited to introduce you to the Balboa GS501Z Control Pack paired with the TS-VL404 topside control. This powerful combination is designed to revitalize your hot tub experience, offering precise control and exceptional performance for the ultimate in relaxation and hydrotherapy.

Product Overview

The Balboa GS501Z with TS-VL404 is a state-of-the-art electronic control system that brings advanced functionality to your hot tub. This package includes a robust control pack and a user-friendly topside panel, giving you complete command over your spa’s functions.

Key Features

• Powerful Performance: Equipped with a 3.0kW heater for efficient and rapid temperature control.
• Versatile Pump Options: Compatible with single or dual-speed pumps, plus an optional circulation pump for superior water quality.
• Air Blower Ready: Includes an optional air blower connection for enhanced hydrotherapy.
• Intuitive Control Panel: The TS-VL404 topside control features easy-to-use buttons for jets, blower, temperature/set, and lighting.
• Advanced M7 Technology: Innovative sensor system simplifies installation and maintenance.
• Flexible J17 Port: Allows for either an air blower or an additional single-speed pump, protected by a 10 AMP quick-blow fuse.

Detailed Specifications

Here’s a comprehensive breakdown of the Balboa GS501Z + TS-VL404 system specifications:

Specification	Detail
Type	1 pump with air
Manufacturer	Balboa
Power	230VAC, 50Hz, 16A or 32A
Heater	1 x 3.0kW
Pump Compatibility	Single or dual speed + optional circulation pump
Air Blower	1 connection available (optional)
Ozone	1 connection available
Light	1 x 12 volt
Radio/TV/AV	Connection point available
Retrofit Compatibility	Suitable for any retrofit system or upgrades
Connections	2-inch socket heater union sleeves
Control Box Dimensions	500 mm (inc. heater), 320 mm (box only) x 270 mm x 120 mm
TS-VL404 Dimensions	187 mm x 83 mm
TS-VL404 Controls	Jets, Blower, Temp/Set, Light

Documentation

• gs501z tech sheet
• VL series
• cutout template

Installation and Compatibility

The Balboa GS501Z is engineered for easy installation and broad compatibility. It’s an excellent choice for upgrading an existing system or installing in a new hot tub setup. The control pack’s dimensions make it suitable for various spa configurations, and the 2-inch socket heater union sleeves ensure a secure connection to your tub’s plumbing system.

Advanced M7 Technology

A standout feature of the Balboa GS501Z is its incorporation of M7 technology. This innovative system uses internal sensors to monitor and control your hot tub’s functions, eliminating the need for external sensors and flow switches. The result is a more streamlined, reliable setup that’s easier to install and maintain.

User-Friendly TS-VL404 Control Panel

The included TS-VL404 topside control panel puts the power of your hot tub at your fingertips. With dedicated buttons for jets, blower, temperature/set, and lighting, you can easily adjust your hot tub’s settings to create the perfect ambiance for relaxation or entertainment. The larger size of this panel (187 mm x 83 mm) offers improved visibility and ease of use compared to smaller models.

Customization Options

While the Balboa GS501Z comes with a robust set of features out of the box, it also offers room for customization. The available connection points for air blower, ozone, lighting, and audio/visual equipment allow you to tailor your hot tub experience to your personal preferences.

Special J17 Port Feature

One of the unique aspects of the GS501Z is the J17 port. This versatile connection allows you to choose between an air blower or an additional single-speed pump, depending on your preference. The port is protected by a 10 AMP quick-blow fuse, ensuring safe operation regardless of your choice.

Conclusion

The Balboa GS501Z Control Pack with TS-VL404 topside control is a powerful, versatile, and user-friendly solution for hot tub owners looking to upgrade their system or replace an aging control pack. Its combination of advanced technology, broad compatibility, and intuitive controls makes it an excellent choice for enhancing your hot tub experience.

Remember, while this control system is designed for straightforward installation, it’s always recommended to consult with a professional if you’re unsure about any aspect of the installation process. Safety should always be your top priority when working with electrical components in a wet environment.

Upgrade your hot tub experience today with the Balboa GS501Z + TS-VL404 – where innovation meets relaxation!

 

 

Hot Tub Wiring – Configuring a Balboa BP7 Spa Control 4.0kW Spa Pack

If you are using a basic setup, and by basic I mean a regular dual speed hot tub pump with a single speed blower, out of the box, your Balboa pack is likely to work without any additional configuration. However, if you are not using a separate circulation pump, the chances are you will need to “configure” the pack using the details below.

On the underside of the Spa Pack covers, you will see a circuit diagram that looks something like this.

Firstly, you need to work through the setup table at the bottom on the left hand side and work out which setup number you need. For example, a 2 speed pump and a single speed blower will need setup #12.

Next, you need to change the DIP switch settings to match your setup. Once you have the right combination of DIP switches, using the topside control you should do the following to change the pack’s setup mode to #12.

To go into the low levels follow the following steps please.

1. Turn tub off.
2. DIP switch 1 move to ON.
3. Turn tub on
4. On the top side control, Press “WARM” twice
5. Press “LIGHT”
6. Press “WARM”
7. Then use “WARM” to move down to the low levels until you get on the set up number you need.
8. Turn off tub
9. DIP switch one back to OFF
10. Turn on tub

Getting the right setup and config is important for the pack to function correctly and the buttons on the top side to do what you expect them to.

 

Balboa DIP Switches Explained

Most of the Balboa Spa Packs have a set of DIP switches that can seem a little confusing in the setup. In the most basic form, you are telling the Spa Pack how many pumps or blowers you have connected and how many it should allow to run before it turns off the heater (or let them all run at once). The reason for this is if you are limiting the amount of current the pack can draw. You are also telling the pack wither you need additional cool down times if you are using an gas/propane/ASHP additional heater. This to stop the kettling effect you can get in the heaters.

Check the circuit diagram that is on the inside of your Balboa pack and do not just copy the settings I explain below as they may be in a different order. The “logic” behind them is the same so just check what each of the DIP switches says it does.

Fixed-fuction DIP Switches 

A1 Test Mode (normally Off). 

A2 In “ON” position, add one high-speed pump (or blower) with Heater. (If you have 1 pump and NO blower use this)

A3 In “ON” position, add two high-speed pumps (or 1 HS Pump and Blower) with Heater. (If you have a pump and a blower use this)

A4 In “ON” position, add four high-speed pumps (or 3 HS Pumps and Blower) with Heater. (If you have two or three pumps and a blower use this)

You should only enable one of the A2, A3 or A4. You can use them in combinations, but it is easier just to use one.

A5 In “ON” position, enables Special Amperage Rule B.  In “OFF” position, enables Special Amperage Rule A. 

Special Amperage Rule A No Limitation (if you are not sure, set it to this. Worst case, your electric will trip if you don’t have enough current available)

Special Amperage Rule B 2 High Speed Pump Maximum, in Setups 1 – 9 1 High Speed Pump Maximum, and also Blower turns off with 1 High Speed Pump, in Setups 10 – 18 (avoid this if you can)

A6 Persistent memory reset (Used when the spa is powering up to restore factory settings as determined by software configuration). 

A2, A3, and A4 work in combination to determine the number of high-speed devices and blowers that can run before the heat is disabled. i.e. A2 and A3 in the ON position and A4 in the OFF position will allow the heater to operate with up to 3 high‑speed pumps (or two HS Pumps and Blower) running at the same time. Heat is disabled when the fourth high-speed pump or blower is turned on. 

Note: A2/A3/A4 all off = No heat with any high-speed pump or blower. 

Assignable DIP Switches 

A7 In “ON” position, enables a 5-minute cooldown for some gas heaters (Cooling Time B). In “OFF” position, enables a 1-minute cooldown for electric heaters (Cooling Time A). 

 

Who are Balboa Water Group?

Balboa Water Group is a prominent manufacturer and supplier of innovative spa and hot tub components. With a rich history spanning several decades, Balboa Water Group has established itself as a leading brand in the industry, known for its cutting-edge technology, quality craftsmanship, and exceptional customer service.

Balboa Water Group specializes in designing and manufacturing spa control systems, which serve as the brains behind the operation of hot tubs and spas. These control systems include a control panel, circuit board, and other components that regulate various functions, such as temperature control, water flow, jet activation, and lighting.

One of the key strengths of Balboa Water Group is their dedication to innovation. They continuously strive to develop new and advanced technologies that enhance the spa experience for users. From user-friendly interfaces and touchscreens to wireless connectivity and smartphone apps, Balboa control systems offer convenient and intuitive control over every aspect of the spa.

Balboa Water Group also places a strong emphasis on safety and energy efficiency. Their control systems often feature built-in safety mechanisms, such as high-limit sensors and automatic shutdowns, to protect users from potential hazards. Additionally, they incorporate energy-saving features that optimize power consumption, helping to reduce operating costs and environmental impact.

In addition to control systems, Balboa Water Group offers a comprehensive range of spa components and accessories. These include pumps, heaters, filters, jets, valves, and more. Their products are known for their durability, reliability, and compatibility with various hot tub models and brands.

Customer satisfaction is a top priority for Balboa Water Group. They provide excellent technical support, troubleshooting assistance, and product documentation to help spa owners and industry professionals make the most of their products. Balboa also collaborates closely with spa manufacturers and distributors worldwide, ensuring that their components are widely available and supported.

Balboa Water Group's commitment to quality and innovation has earned them a stellar reputation within the spa industry. Whether you are a hot tub owner, a spa designer, or a service professional, choosing Balboa products can provide you with the confidence and reliability you need to create a superior spa experience.

Overall, Balboa Water Group is a trusted and respected name in the spa industry, known for its technologically advanced spa components, commitment to customer satisfaction, and ongoing pursuit of innovation. Their products and solutions continue to elevate the spa experience for users around the world.