🌊 Norsup Silent-Pro 17 Inverter Swimming Pool Heat Pump – 17kW, WiFi Control, Ultra-Quiet Operation

Transform your pool into a year-round oasis with intelligent heating that’s whisper-quiet, energy-efficient, and smart-controlled.

The Norsup Silent-Pro 17 (Part No. 7036142) represents the pinnacle of swimming pool heating technology. With full inverter control, this heat pump automatically adjusts its output to match your pool’s needs, delivering exceptional energy efficiency while maintaining near-silent operation. Whether you’re extending your swimming season or maintaining perfect water temperature year-round, the Silent-Pro 17 offers the performance, reliability, and smart features that modern pool owners demand.

💰 Exceptional Energy Efficiency With a COP (Coefficient of Performance) reaching up to 16.5, the Silent-Pro 17 generates up to 16.5 times more heat energy than the electricity it consumes. This inverter technology adapts power usage based on conditions, dramatically reducing running costs compared to traditional pool heaters.

🔇 Ultra-Quiet Operation Starting at just 19dB(A) at 10 meters – quieter than a whisper – this heat pump won’t disturb your peaceful poolside moments or your neighbours. The innovative double-side airflow design and variable-speed fan ensure minimal noise pollution.

📱 Smart WiFi Control Control your pool temperature from anywhere using the included WiFi module and NorsupOne app. Set schedules, adjust temperatures, monitor performance, and receive alerts – all from your smartphone.

🌍 Eco-Friendly R32 Refrigerant Uses R32 refrigerant with a Global Warming Potential (GWP) three times lower than older R410A gas, reducing environmental impact while maintaining superior performance.

❄️ All-Season Performance Operates effectively in temperatures as low as -15°C, making it suitable for extended swimming seasons and year-round pool heating in most climates.

🛡️ Outstanding Warranty 10-year warranty on the compressor and titanium heat exchanger, 5-year warranty on the complete heat pump – demonstrating exceptional build quality and manufacturer confidence.

🎯 Key Features & Benefits

Full Inverter Technology

Unlike fixed-speed heat pumps that operate at full power or off, the Silent-Pro 17’s inverter compressor continuously adjusts output from 2.5kW to 17.8kW. This delivers:

• Lower energy bills through optimized power usage
• More stable water temperature with minimal fluctuation
• Quieter operation as the system rarely runs at maximum capacity
• Extended equipment lifespan due to reduced start/stop cycles

Whisper-Quiet Double-Airflow Design

The horizontal airflow configuration with fully variable-speed DC fan motor (400-800 rpm) ensures:

• 19dB(A) at 10 meters in silent mode – quieter than rustling leaves
• 40-50dB(A) at 1 meter maximum – similar to a quiet library
• Neighbour-friendly operation suitable for residential areas
• Multiple operating modes: Power, Smart, and Silent

Premium Titanium Twisted Heat Exchanger

Constructed from twisted titanium tubes encased in corrosion-resistant PVC:

• Complete resistance to salt, chlorine, and chemical damage
• 10-year warranty on heat exchanger longevity
• Superior heat transfer efficiency compared to standard designs
• Suitable for saltwater pools, high-chlorine environments, and marine climates

SmartGrid Ready Technology

Future-proof your installation with SmartGrid capability:

• Responds to external control signals from energy management systems
• Automatically shifts operation to off-peak electricity periods
• Maximizes use of solar power when integrated with photovoltaic systems
• Potential for further energy cost savings as smart grid infrastructure develops

Integrated WiFi Control

Pre-installed WiFi module enables complete remote management:

• Temperature adjustment from anywhere in the world
• Operating mode selection (heating, cooling, auto, silent)
• Timer programming for automated operation schedules
• Real-time monitoring of water temperature, ambient conditions, and system status
• Fault notifications sent directly to your smartphone
• Compatible with iOS and Android via free NorsupOne app

Advanced Protection Systems

Multiple safety features ensure reliable, worry-free operation:

• Anti-freeze protection prevents damage in cold conditions
• High/low pressure protection guards refrigerant system
• Flow switch protection prevents operation without water flow
• Compressor overload protection extends equipment life
• Automatic defrost maintains performance in cold weather
• IPX4 water resistance for outdoor installation

Soft Start Function

Gradual ramp-up of electrical load:

• Prevents voltage spikes that can trip circuit breakers
• Protects other electrical equipment on the same circuit
• Reduces stress on electrical supply system
• Particularly beneficial for properties with limited electrical capacity

📊 Complete Technical Specifications

Specification	Details
Model	Silent-Pro 17
Part Number	7036142
Heating Capacity (A27/W27)	2.5–17.8 kW (variable)
Heating Capacity (A15/W25)	2.3–12.8 kW (variable)
Heating Capacity (A10/W25)	1.66–9.90 kW (variable)
Heating Capacity (A5/W25)	1.43–7.39 kW (variable)
Heating Capacity (A0/W25)	1.32–6.38 kW (variable)
Heating Capacity (A-5/W25)	1.14–6.23 kW (variable)
Power Input (A27/W27)	0.151–2.78 kW
Power Input (A15/W25)	0.353–2.66 kW
COP (A27/W27)	Up to 16.5
COP (A15/W25)	Up to 6.5
COP (A10/W25)	Up to 4.9
Recommended Pool Volume	50–85 m³
Electrical Supply	230V AC, Single Phase, 50Hz
Rated Current	13.5 A
Minimum Fuse Rating	30 A
Operating Temperature Range	-15°C to +43°C ambient
Water Temperature Range	9°C to 40°C
Compressor Brand	Mitsubishi
Compressor Type	Rotary inverter
Refrigerant Type	R32 (eco-friendly)
Refrigerant GWP	675 (3x lower than R410A)
Heat Exchanger	Twisted titanium tubes in PVC housing
Fan Configuration	1x horizontal discharge
Fan Motor	DC variable speed (400-800 rpm)
Fan Power Consumption	75W maximum
Noise Level (at 1m)	40–50 dB(A)
Noise Level (at 10m)	20–30 dB(A)
Water Connections	50mm (slip fit PVC compatible)
Nominal Water Flow	5.2 m³/h
Maximum Water Pressure Drop	5 kPa
Cabinet Material	Powder-coated aluminum (black)
Cabinet Protection	IPX4 water resistant
Control Interface	Full-color touchscreen + WiFi
WiFi Module	Included (pre-installed)
Operating Modes	Power / Smart / Silent / Auto
Defrost System	Automatic intelligent defrost
Dimensions (L×W×H)	1020 × 480 × 768 mm
Net Weight	Approximately 70 kg (see nameplate)
Shipping Weight	Approximately 85 kg (see package)
Warranty (Heat Pump)	5 years
Warranty (Compressor)	10 years
Warranty (Heat Exchanger)	10 years
Winter Cover	Included
Standards Compliance	CE certified, Energy Label A

🏊 Pool Sizing & Suitability Guide

Recommended Pool Volumes

The Silent-Pro 17 is ideally suited for swimming pools with volumes between 50 to 85 cubic meters, provided they have proper insulation (pool cover).

Volume Calculation:

• Rectangular pools: Length (m) × Width (m) × Average Depth (m)
• Circular pools: π × Radius² (m) × Average Depth (m)
• Oval pools: π × Length/2 (m) × Width/2 (m) × Average Depth (m)

Example Pool Sizes:

Pool Shape	Dimensions	Approximate Volume
Rectangular	10m × 5m × 1.5m	75 m³
Rectangular	12m × 4m × 1.3m	62 m³
Rectangular	8m × 4m × 1.8m	58 m³
Circular	6m diameter × 1.5m deep	42 m³
Oval	10m × 5m × 1.4m	55 m³

⚠️ Important: These are recommendations. Actual suitability depends on:

• Pool insulation (cover quality and usage)
• Ambient climate (average temperatures during swimming season)
• Desired water temperature
• Wind exposure (sheltered vs. exposed locations)
• Usage patterns (residential vs. commercial)

📄 Downloads & Documentation

Access complete technical information, installation guides, and user manuals:

📥 Installation & User Manual (opens in new tab) Complete installation instructions, electrical wiring diagrams, plumbing guidance, operation procedures, maintenance schedules, and troubleshooting guides. Available in English, Dutch, German, French, Danish, and Swedish. Essential for installers and owners.

📥 WiFi Controller Manual (opens in new tab) Step-by-step guide for setting up WiFi connectivity, using the NorsupOne mobile app, configuring timers, adjusting operating modes, and troubleshooting connection issues. Includes QR code for app download.

📥 Technical Datasheet (opens in new tab) Comprehensive specifications for the entire Silent-Pro range including heating capacities at different ambient temperatures, COP values, power consumption, dimensions, and pool volume recommendations.

⏱️ Estimated Heat-Up Times

Understanding how quickly your pool will reach target temperature helps with planning and expectations. Below are calculated estimates based on the Silent-Pro 17’s performance.

Heat-Up Time Calculation

Formula Used: Time (hours) = (Pool Volume in m³ × Temperature Rise in °C × 1.16) ÷ Heat Pump kW Rating

Assumptions:

• Heat pump operating at 12.8 kW (A15/W25 condition – typical spring/autumn)
• Pool cover used during heating to minimize heat loss
• Sheltered location with minimal wind
• Clean filter system with good water flow

Heat-Up Time Estimates Table

Pool Volume	5°C Rise	8°C Rise	10°C Rise	15°C Rise
50 m³	23 hours	36 hours	45 hours	68 hours
60 m³	27 hours	43 hours	54 hours	81 hours
70 m³	32 hours	50 hours	63 hours	95 hours
80 m³	36 hours	58 hours	72 hours	109 hours

Example: A 60m³ pool at 18°C raised to 26°C (8°C rise) in mild 15°C weather = approximately 43 hours (less than 2 days)

📝 Important Disclaimers

These are estimates only. Actual heat-up times vary significantly based on:

✅ Factors that speed heating:

• Using a high-quality pool cover (reduces heat loss by 50-90%)
• Warmer ambient temperatures (higher heat pump output)
• Sheltered location (reduced wind cooling)
• Good pool insulation
• Clean filter (optimal water flow)

❌ Factors that slow heating:

• No pool cover (massive heat loss overnight)
• Colder or windy weather
• Exposed/shaded pool location
• Poor insulation
• Restricted water flow
• Large surface area pools (higher heat loss)

💡 Pro Tip: Running the heat pump continuously with a pool cover until target temperature is reached typically provides the fastest heating. Once at temperature, the inverter technology maintains it efficiently with minimal energy use.

💰 Running Cost Comparison

Estimated Operating Costs

Based on typical UK electricity rates of £0.25 per kWh (adjust for your actual tariff):

Maintaining Temperature (mild weather, 15°C ambient):

• Average power consumption: 0.8–1.5 kW
• Running 8 hours/day: £1.60–£3.00 per day
• Monthly cost (30 days): £48–£90

Initial Heat-Up (from cold):

• Average power consumption: 2.0–2.5 kW
• Running 24 hours/day for 2 days: £12–£15
• One-time cost per season

Seasonal Comparison (6-month season):

Heating Method	Est. Season Cost	Notes
Norsup Silent-Pro 17	£290–£540	With COP 6.5 at 15°C, highly efficient
Gas Heater	£1,200–£1,800	Direct combustion, ~80% efficiency
Electric Resistance	£1,600–£2,400	100% efficiency but expensive per kW
Oil Heater	£1,400–£2,000	Depends on oil prices

💡 The inverter heat pump typically pays for itself within 2-3 seasons compared to gas or direct electric heating.

🌡️ Seasonal Performance Expectations

Understanding how the Silent-Pro 17 performs across different temperatures helps you plan usage:

Spring/Autumn (10-15°C ambient)

• Heating Output: 9.9–12.8 kW
• COP: 4.9–6.5
• Performance: Excellent – ideal operating range
• Best for: Extending swimming season, maintaining comfortable temperatures

Summer (20-27°C ambient)

• Heating Output: 17.8 kW maximum
• COP: Up to 16.5
• Performance: Outstanding – peak efficiency
• Best for: Rapid heating, maintaining high temperatures with minimal energy

Cool Weather (5-10°C ambient)

• Heating Output: 7.4–9.9 kW
• COP: 4.2–4.9
• Performance: Good – still highly efficient
• Best for: Late autumn/early spring use, covered pools

Cold Weather (0-5°C ambient)

• Heating Output: 6.4–7.4 kW
• COP: 3.3–4.2
• Performance: Moderate – still better than resistance heating
• Best for: Winter pool maintenance, indoor pools

Very Cold (-5 to 0°C ambient)

• Heating Output: 6.2 kW
• COP: 2.9–3.1
• Performance: Basic – reduced efficiency but still functional
• Best for: Anti-freeze protection, minimal heating needs

🔧 Installation Requirements

Clearance & Placement

For optimal performance and serviceability, maintain these minimum clearances:

Location Guidelines:

✅ Good Locations:

• Well-ventilated outdoor area
• Level concrete pad or reinforced decking
• Protected from direct sunlight (reduces cabinet fading)
• Near pool equipment for shorter pipe runs
• Accessible for maintenance
• Away from bedroom windows (for neighbor consideration)

❌ Avoid:

• Enclosed spaces without ventilation
• Areas where discharged air recirculates back to intake
• Directly under windows or air vents
• Behind dense shrubs/vegetation
• Areas prone to flooding
• Locations with no drainage for condensation

Electrical Requirements

• Supply: 230V AC, single phase, 50Hz
• Dedicated circuit: 30A minimum fuse/MCB
• RCD protection: 30mA residual current device required
• Cable: Minimum 2.5mm² for runs up to 20m
• Earthing: Proper earth bonding essential
• Isolation: Must have accessible isolation switch

⚠️ Important: Electrical installation must comply with IEC/BS 7671 wiring regulations and be performed by a qualified electrician.

Plumbing Requirements

• Pipe size: 50mm PVC (slip-fit connections provided)
• Water flow: 5.2 m³/h (maintains optimal heat transfer)
• By-pass valve: Recommended for flow control
• Position in system: After filter, before chemical dosing
• Isolation valves: Install before and after unit for servicing
• Drain valve: Include for winterization
• Condensate drain: 20mm drain connection for moisture removal

Maximum Distance from Pool:

• Optimal: Within 7.5 meters
• Acceptable: Up to 15 meters (with increased pipe insulation)
• Heat loss: Approximately 0.6 kWh per 30m pipe run per 5°C temperature difference

🎮 Operating Modes Explained

Power Mode

• Purpose: Maximum heating output
• Fan speed: 600-800 rpm
• Compressor: Full inverter range
• Noise level: 40-50 dB(A)
• Use when: Initial heat-up, cold weather, rapid temperature increase needed

Smart Mode ⭐ Recommended

• Purpose: Balanced efficiency and performance
• Fan speed: Variable based on load
• Compressor: Automatically optimized
• Noise level: 30-45 dB(A)
• Use when: Normal daily operation, temperature maintenance

Silent Mode

• Purpose: Ultra-quiet operation
• Fan speed: 400-550 rpm minimum
• Compressor: Reduced output
• Noise level: 19-30 dB(A)
• Use when: Evening/night operation, noise-sensitive areas, slow overnight heating

Auto Mode

• Purpose: Hands-free temperature control
• Operation: Automatically switches between heating/cooling
• Target: Maintains set temperature ±1°C
• Use when: You want consistent temperature without manual intervention

⚙️ Smart Features & Connectivity

WiFi Control via NorsupOne App

Remote Management:

• Set target temperature from anywhere
• Switch operating modes
• Create custom timer schedules
• Monitor real-time water and ambient temperature
• View energy consumption estimates
• Receive push notifications for errors

Timer Programming:

• On/Off timers: Schedule daily operation times
• Silent mode timer: Automatically switch to quiet operation during specific hours
• Weekly schedules: Different programs for weekdays/weekends
• Multiple timers: Up to 4 independent timer slots

Smart Home Integration:

• Compatible with SmartGrid technology
• Can respond to external control signals
• Ready for future home automation integration
• Works with energy management systems

Touchscreen Controller

User-Friendly Interface:

• Full-color 5″ touchscreen display
• Intuitive menu navigation
• Real-time temperature monitoring
• Operating status indicators
• Error code display with descriptions
• Child lock function
• Multiple language support

🛠️ Maintenance & Care

Regular Maintenance (Every Month)

✅ Visual Inspection:

• Check for debris around air intake/discharge
• Inspect water connections for leaks
• Verify condensate drain is flowing freely
• Look for signs of corrosion or damage

✅ Clean Air Inlet:

• Remove leaves, grass clippings, or debris
• Gently vacuum or brush fan grille
• Ensure airflow is unrestricted

✅ Check Water Flow:

• Verify pool pump is operating correctly
• Clean pool filter (improves heat pump efficiency)
• Check water flow rate is within specification

Seasonal Maintenance

Start of Season:

• Remove winter cover
• Inspect all electrical connections
• Test WiFi connectivity
• Verify operating modes function correctly
• Check refrigerant pressures (qualified technician only)

End of Season (Winterization):

• Drain heat exchanger completely
• Clean entire unit thoroughly
• Install winter cover (included)
• Isolate electrical supply
• Document any issues for pre-season service

Annual Professional Service

Recommended annual inspection by qualified technician:

• Refrigerant pressure check
• Electrical connection tightening
• Heat exchanger inspection
• Compressor operational check
• Fan motor bearing lubrication
• Control board diagnostics
• Performance testing

❓ Frequently Asked Questions

General Operation

Q: How long does it take to heat my pool? A: This depends on pool volume, desired temperature rise, and ambient conditions. As a guide, a 60m³ pool typically requires 40-50 hours to heat from 18°C to 26°C in 15°C weather with a cover. See the Heat-Up Times section for detailed estimates.

Q: Can I use this heat pump year-round? A: Yes, the Silent-Pro 17 operates effectively from -15°C to +43°C ambient temperature. However, efficiency decreases in colder weather. It’s most economical in temperatures above 5°C.

Q: Do I need a pool cover? A: While not mandatory, a pool cover is highly recommended. It can reduce heat loss by 50-90%, significantly improving efficiency and reducing running costs. Without a cover, heating times and costs increase dramatically.

Q: Will this heat pump also cool my pool? A: Yes, the Silent-Pro 17 has a cooling function, useful for pools that become too warm in hot climates. Cooling capacity is similar to heating capacity.

Installation & Compatibility

Q: Can I install this heat pump myself? A: While mechanically capable DIYers can handle the plumbing, electrical installation must be performed by a qualified electrician due to legal and safety requirements. Refrigerant system work requires certified technicians.

Q: Is this compatible with saltwater pools? A: Absolutely. The titanium heat exchanger is specifically designed to resist corrosion from salt, chlorine, and other pool chemicals.

Q: What size circuit breaker do I need? A: A minimum 30A circuit breaker is required, with 30mA RCD protection. Always verify with your electrician based on cable length and local regulations.

Q: Can this be installed indoors? A: While possible, indoor installation requires adequate ventilation and drainage for condensate. Outdoor installation is recommended for optimal performance and longevity.

Performance & Efficiency

Q: What is COP and why does it matter? A: COP (Coefficient of Performance) measures efficiency. A COP of 6.5 means the heat pump produces 6.5 kW of heat for every 1 kW of electricity consumed – making it 650% efficient. Higher COP = lower running costs.

Q: Why does COP vary with temperature? A: Heat pumps extract warmth from air. Warmer air contains more available heat energy, making extraction easier and more efficient. In 27°C weather, COP reaches 16.5. In 15°C weather, it’s around 6.5 – still excellent.

Q: How much does it cost to run per day? A: Once at temperature, expect £1.60–£3.00 per day in mild weather (based on £0.25/kWh electricity). This varies with ambient temperature, pool cover usage, and target temperature. See the Running Cost Comparison section for details.

Q: Is inverter technology worth the extra cost? A: Absolutely. Inverter technology provides 30-40% energy savings compared to fixed-speed heat pumps, plus quieter operation, more stable temperatures, and longer equipment lifespan. Most users recover the price premium within 2-3 seasons.

Smart Features

Q: Is WiFi necessary for operation? A: No, the heat pump operates fully via the touchscreen controller without WiFi. The WiFi module provides convenient remote control and monitoring but isn’t essential for basic operation.

Q: What if my WiFi network changes? A: You can easily reconfigure the WiFi module to connect to a new network using the NorsupOne app. Instructions are in the WiFi Controller Manual.

Q: Can multiple users control the heat pump? A: Yes, once the heat pump is registered to your account, you can grant access to additional app users within your household.

Noise & Environment

Q: How quiet is “silent mode” really? A: In silent mode at 10 meters distance, the heat pump operates at approximately 19-20 dB(A) – quieter than a whisper (30 dB) and similar to rustling leaves. At 1 meter, it’s around 40 dB(A) – comparable to a quiet library.

Q: Will it disturb my neighbors? A: In silent mode, the heat pump is neighborhood-friendly. Smart timer programming lets you run in silent mode during evenings and use power mode during the day when noise is less of a concern.

Q: Is R32 refrigerant safe? A: Yes, R32 is widely used in modern heat pumps. While mildly flammable, it’s contained within a sealed system with multiple safety controls. It has significantly lower environmental impact than older refrigerants (GWP of 675 vs. 2088 for R410A).

Warranty & Support

Q: What does the warranty cover? A: The Silent-Pro 17 includes a comprehensive 5-year warranty on the complete heat pump, with extended 10-year coverage on the compressor and heat exchanger – the two most critical and expensive components.

Q: What’s not covered by warranty? A: Typical exclusions include damage from improper installation, lack of maintenance, chemical damage from incorrect pool chemistry, physical damage, and normal wear items like electrical connectors. Always check warranty documentation.

Q: Where can I get spare parts? A: Norsup parts are available through authorized dealers and online retailers. Common wear items like fan motors, control boards, and sensors are readily available.

Q: Is professional installation required for warranty validity? A: While not always explicitly required, professional installation by qualified technicians is strongly recommended and may be necessary for warranty claims. Keep all installation documentation and receipts.

✅ What’s Included

In the Box:

• 1x Norsup Silent-Pro 17 heat pump unit
• 1x WiFi module (pre-installed)
• 1x Touchscreen controller with wall mount
• 1x Winter protective cover
• 1x Installation manual (multi-language)
• 1x WiFi setup guide
• 1x Technical datasheet
• Connection hardware pack (pipe connections, mounting bolts)

Not Included (Required for Installation):

• PVC plumbing pipes and fittings
• Electrical cable and conduit
• Isolation valves
• By-pass valve and fittings
• Circuit breaker/RCD
• Concrete pad or mounting base
• Pool cover (highly recommended)

🏆 Technical Advantages

Why Choose Norsup?

✅ Mitsubishi Compressor Premium Japanese compressor technology known for reliability and longevity. The rotary inverter design provides smooth, efficient operation with minimal wear.

✅ True Full Inverter Unlike “on/off” models, the entire system – compressor, fan, and control electronics – uses inverter technology for seamless power adjustment and maximum efficiency.

✅ Advanced PCB Design Multi-layered circuit boards with quality components ensure reliable operation in harsh outdoor environments with temperature extremes and humidity.

✅ IPX4 Weather Protection Cabinet and electrical components rated for outdoor exposure with protection against water splashing from any direction.

✅ Intelligent Defrost Automatic defrost system monitors coil temperature and only activates when necessary, maximizing heating time while preventing ice buildup.

✅ Premium Build Quality Powder-coated aluminum cabinet with anti-corrosion treatment, stainless steel fasteners, and marine-grade wiring connections for long-term durability.

📞 Support & Resources

Technical Support: For installation questions, troubleshooting assistance, or technical information, consult:

NorsupOne App:

• Download from Google Play Store or Apple App Store
• Scan QR code in WiFi Controller Manual
• Free app with no subscription required
• Regular updates with new features

Professional Installation: Always use qualified professionals:

• Refrigeration technician for refrigerant work
• Certified electrician for electrical connections
• Experienced pool technician for plumbing integration

🌟 Customer-Focused Design

The Norsup Silent-Pro 17 has been engineered with the pool owner’s experience in mind:

🔇 Peace & Quiet – Advanced noise reduction lets you enjoy your pool environment without mechanical drone

💚 Environmental Responsibility – Low-GWP refrigerant and high efficiency reduce your carbon footprint

📱 Modern Convenience – Full smartphone control means no trips outside to adjust settings

💪 Built to Last – Premium components and 10-year warranty on critical parts demonstrate manufacturer confidence

⚡ Energy Savings – Inverter technology delivers exceptional efficiency, reducing running costs by up to 40% vs. fixed-speed models

🌍 Global Performance – Operates effectively from Arctic to Mediterranean climates (-15°C to +43°C)

🎯 Summary

The Norsup Silent-Pro 17 represents the perfect balance of performance, efficiency, and sophistication for medium to large residential swimming pools. Whether you’re extending your swimming season by a few months or maintaining year-round comfort, this heat pump delivers:

✅ Outstanding Efficiency – COP up to 16.5 means minimal running costs

✅ Whisper-Quiet Operation – From 19dB, ideal for residential areas

✅ Full Smart Control – Integrated WiFi module and premium touchscreen

✅ Proven Reliability – Mitsubishi compressor with 10-year warranty

✅ All-Season Performance – Operates down to -15°C

✅ Eco-Friendly Technology – R32 refrigerant with low environmental impact

✅ Premium Build Quality – Titanium heat exchanger, aluminum cabinet, IPX4 protection

For pool owners who refuse to compromise on quality, efficiency, or performance, the Silent-Pro 17 is the intelligent choice for year-round pool comfort.