🌊 Norsup P26X/32 Inverter Swimming Pool Heat Pump | 26kW | 75-130m³ Pool Capacity | Ultra-Quiet WiFi Control

Transform your pool into an all-season oasis with the Norsup P26X/32 Inverter Heat Pump – the intelligent choice for efficient, quiet, and eco-friendly pool heating. Designed for pools ranging from 75m³ to 130m³, this advanced inverter heat pump delivers powerful 26kW heating with remarkable energy efficiency (COP up to 16.0), meaning you get up to £16 worth of heat for every £1 of electricity used.

This isn’t just a heat pump – it’s a complete pool heating solution engineered for British weather and built to last. Here’s what sets it apart:

✅ Inverter Technology = Lower Running Costs
Unlike fixed-speed heat pumps that constantly cycle on and off, the P26X/32’s inverter technology continuously adjusts output to match conditions. This means up to 30% lower electricity bills compared to traditional heat pumps.

✅ Ultra-Quiet Operation
At just 26dB from 10 meters away in silent mode (quieter than a whisper), your neighbors won’t even know it’s running. Perfect for residential areas with noise restrictions.

✅ WiFi Control Included
Control your pool temperature from anywhere using the NorsupOne smartphone app (iOS & Android). Set schedules, monitor performance, and adjust settings without leaving your sofa.

✅ All-Season Performance
Works efficiently down to -15°C ambient temperature, extending your swimming season well into autumn and starting earlier in spring.

✅ Eco-Friendly R32 Refrigerant
Using next-generation R32 gas with 3x lower Global Warming Potential than R410A – better for the environment and future-proof for upcoming regulations.

🏊 Is This Heat Pump Right for Your Pool?

Pool Sizing Guide

Pool Volume	Pool Dimensions (Example)	Suitability
75m³ (16,500 gal)	10m × 5m × 1.5m	✅ Optimal
90m³ (19,800 gal)	12m × 5m × 1.5m	✅ Optimal
105m³ (23,100 gal)	14m × 5m × 1.5m	✅ Optimal
130m³ (28,600 gal)	10m × 6.5m × 2m	✅ Maximum capacity

Important: Pool must be properly insulated with a cover for optimal efficiency. Uninsulated pools may require a larger unit.

⏱ How Quickly Will It Heat My Pool?

Estimated Heat-Up Times (from 15°C to 28°C)

Conditions: Ambient air temperature 20°C, pool covered when not in use

Pool Volume	Temperature Rise	Estimated Time	Daily Running Cost*
75m³	15°C → 28°C (13°C rise)	48-60 hours	£4-6 per day
90m³	15°C → 28°C (13°C rise)	58-72 hours	£4-6 per day
105m³	15°C → 28°C (13°C rise)	68-84 hours	£4-6 per day
130m³	15°C → 28°C (13°C rise)	84-105 hours	£4-6 per day

Formula Used: Time (hours) = (Pool Volume m³ × Temperature Rise °C × 1.16) ÷ Heat Pump kW Rating

⚠️ Please Note: These are estimates based on ideal conditions. Actual heat-up times will vary depending on:

• Ambient air temperature and humidity
• Wind exposure
• Pool insulation and cover quality
• Initial water temperature
• Heat loss from the pool structure
• Whether pool is indoor or outdoor

Maintaining Temperature: Once at target temperature, the inverter adjusts to use minimal power – typically running costs drop to £1-3 per day in summer months.

*Based on electricity cost of £0.24 per kWh (UK average, 2024)

🔥 Seasonal Performance Guide

Spring (March-May)

Ambient Temp: 8-15°C
Performance: COP 5.2-8.2
Running Cost: £5-8 per day to maintain 26-28°C
Best For: Getting your pool ready for the season

Summer (June-August)

Ambient Temp: 15-27°C
Performance: COP 8.2-16.0
Running Cost: £2-4 per day to maintain 28-30°C
Best For: Peak efficiency, lowest running costs

Autumn (September-November)

Ambient Temp: 5-15°C
Performance: COP 4.5-8.2
Running Cost: £6-10 per day to maintain 26-28°C
Best For: Extending your swimming season

Winter (December-February)

Ambient Temp: -5 to 10°C
Performance: COP 4.0-5.6
Running Cost: £8-15 per day
Note: Suitable for heated pools, spas, or swim spas that operate year-round

💰 Running Cost Comparison

Why Heat Pumps Save You Money:

Heating Method	Annual Running Cost*	CO₂ Emissions	Efficiency
Norsup P26X/32 Heat Pump	£800-1,200	Low	COP up to 16.0
Oil Boiler	£2,500-3,500	Very High	85-90% efficient
Gas Boiler	£1,800-2,800	High	85-95% efficient
Electric Heater	£3,500-5,000	Medium	100% but 1:1 ratio
Solar Heating	£200-400 (after installation)	Very Low	Weather dependent

*Based on a 100m³ pool, 6-month season, electricity at £0.24/kWh. Actual costs vary by usage, temperature settings, and pool insulation.

Payback Period: Most customers see a complete return on investment within 2-3 years compared to gas heating, and within 1-2 years compared to electric heating.

🎯 Top 7 Standout Features

1. 🔄 Full Inverter Technology

Continuously variable output from 6.8kW to 26kW means the unit precisely matches heating demand. No wasteful on/off cycling – just smooth, efficient operation that saves you money.

2. 📱 WiFi Control & Monitoring

Included WiFi module connects to the NorsupOne app. Set schedules, monitor pool temperature, track energy usage, and receive maintenance alerts – all from your smartphone.

3. 🔇 Whisper-Quiet Operation

• Silent Mode: 26dB at 10m (quieter than a library)
• Standard Mode: 26-37dB at 10m
• At Source (1m): 46-57dB

Perfect for noise-sensitive areas. Run it at night on cheaper electricity tariffs without disturbing anyone.

4. ❄️ All-Weather Performance

Operating range from -15°C to +43°C means reliable heating even during unseasonably cold British summers or extended autumn swimming.

5. 💎 Premium Titanium Heat Exchanger

• Twisted titanium tube design for maximum heat transfer
• Completely resistant to salt, chlorine, and other pool chemicals
• 10-year warranty on heat exchanger
• PVC housing for corrosion resistance

6. ⚡ Three Operating Modes

• Power Mode: Maximum heating for rapid temperature increase
• Smart Mode: Balanced efficiency and performance
• Silent Mode: Ultra-quiet operation for nighttime running

7. 🌍 Eco-Friendly R32 Refrigerant

• 67% lower Global Warming Potential (GWP 675 vs R410A’s GWP 2088)
• Future-proof for upcoming F-Gas regulations
• Better heat transfer properties = improved efficiency
• Zero ozone depletion potential

📊 Complete Technical Specifications

Heating Performance

Specification	Details
Model	P26X/32
Part Number	7024630
Heating Capacity A27/W27	26.0 kW (max) – 6.8 kW (min)
Heating Capacity A15/W25	19.0 kW (max) – 5.4 kW (min)
Heating Capacity A10/W25	16.7 kW (max) – 4.8 kW (min)
Heating Capacity A5/W25	13.5 kW (max) – 4.05 kW (min)
Power Input	3.88 kW (max) – 0.43 kW (min)
Swimming Pool Volume	75-130 m³

A = Ambient Air Temperature | W = Water Temperature

Coefficient of Performance (COP)

Condition	COP Range	What This Means
A27/W27 (Ideal conditions)	16.0 – 6.7	£16 of heat for £1 of electricity
A15/W25 (Mild weather)	8.2 – 5.2	£8.20 of heat for £1 of electricity
A10/W25 (Cool weather)	5.6 – 4.5	£5.60 of heat for £1 of electricity
A5/W25 (Cold weather)	5.08 – 4.05	£5.08 of heat for £1 of electricity

Higher COP = More efficient = Lower running costs

Electrical Specifications

Specification	Details
Power Supply	220-240V / 1-Phase / 50Hz
Rated Current	24A
Minimum Fuse Rating	36A
Connection	Requires 6mm² cable minimum
RCD Required	30mA, <0.1 second trip time

⚠️ Professional Installation Required: This unit must be installed by a qualified electrician in accordance with BS 7671 wiring regulations.

Water Connection Specifications

Specification	Details
Water Connection Size	50mm (2″)
Nominal Flow Volume	8.6 m³/h
Maximum Water Pressure Drop	11 kPa
Recommended Pump Size	Minimum 12m³/h flow rate
Pipe Material	PVC, ABS, or HDPE suitable

Compressor & Refrigeration System

Component	Details
Compressor Type	Rotary Inverter
Compressor Brand	Mitsubishi
Compressor Warranty	10 years
Refrigerant	R32 (1.3 kg charge)
Heat Exchanger	Twisted titanium tube in PVC housing
Heat Exchanger Warranty	10 years
Condenser Material	Titanium

Fan System

Specification	Details
Fan Quantity	2 fans
Fan Direction	Horizontal airflow
Fan Speed Range	400-800 RPM (variable)
Fan Motor Type	Variable-speed DC motor

Noise Levels

Distance	Mode	Noise Level
At 1 meter	Standard	46-57 dB(A)
At 10 meters	Standard	26-37 dB(A)
At 10 meters	Silent Mode	26 dB(A)

For Reference:

• 30 dB = Whisper
• 40 dB = Library
• 50 dB = Moderate rainfall
• 60 dB = Normal conversation

Dimensions & Weight

Specification	Details
Net Dimensions (L×W×H)	1165 × 470 × 1275 mm
Shipping Dimensions (L×W×H)	1210 × 495 × 1300 mm
Net Weight	111 kg
Shipping Weight	132 kg
Cabinet Material	ABS (black finish)
Cabinet Protection	IP24 rated

Environmental & Compliance

Specification	Details
Energy Label	A+++
Operating Temperature Range	-15°C to +43°C ambient
Water Temperature Range	9°C to 40°C
CO₂ Equivalent	0.81 tons
Refrigerant GWP	675 (R32)
Compliance	CE marked, RoHS compliant

🛠 Installation Requirements & Clearances

Minimum Clearance Requirements

For Optimal Performance and Maintenance Access:

Side	Minimum Clearance	Recommended Clearance
Front (Air Intake)	1500mm	2000mm
Sides	500mm each side	700mm each side
Top	700mm	1000mm
Rear	300mm	500mm

⚠️ Critical: Do NOT install in an enclosed space. The unit needs unrestricted airflow to operate efficiently.

Installation Location Guidelines

✅ Good Installation Locations:

• Open outdoor areas with good air circulation
• Against external walls with clearance maintained
• On concrete pads or reinforced decking
• Areas protected from prevailing winds (optional windbreak recommended)
• Locations with easy access for annual servicing

❌ Poor Installation Locations:

• Enclosed courtyards with limited air volume
• Near shrubs or hedges that restrict airflow
• Under enclosed pergolas or conservatories
• Areas where discharge air recirculates to intake
• Locations with excessive wind exposure

Base & Mounting

• Foundation: Level concrete pad (minimum 100mm thick) or compacted paving slabs
• Anti-Vibration: Rubber pads included (fitted under unit feet)
• Drainage: Condensate drain connection provided (20mm hose fitting)
• Condensate Output: Up to 5 liters per hour in humid conditions

🔧 What’s Included in the Box

Complete Package Contents:

✅ Norsup P26X/32 Heat Pump Main Unit
✅ WiFi Module (pre-installed)
✅ Full-Color Touchscreen Controller
✅ Controller Mounting Bracket & Fixings
✅ WiFi Antenna
✅ Winter Protection Cover
✅ Anti-Vibration Rubber Pads
✅ Installation Manual (Multi-language)
✅ Quick Start Guide
✅ Warranty Registration Card

Not Included (Available Separately):

• Water connection pipes and fittings
• Electrical cable and junction box
• Circuit breaker and RCD
• Concrete pad or mounting base
• Chemical dosing system (if required)

📥 Downloads & Documentation

📄 Complete Product Manual (WiFi Models)

Comprehensive 174-page installation, operation, and maintenance guide covering electrical wiring, plumbing connections, controller operation, troubleshooting, and technical specifications.
Download Product Manual (PDF, 8.2MB) (opens in new tab)

This manual includes:

• Detailed installation instructions with diagrams
• Electrical wiring schematics
• Plumbing connection guidelines
• Full controller operation guide
• WiFi setup and NorsupOne app instructions
• Maintenance schedules and procedures
• Complete fault code reference
• Technical specifications for all P-Series models

📄 Controller Operation Manual

Dedicated 60-page manual focusing specifically on the full-color touchscreen controller and WiFi module setup, including the NorsupOne smartphone app configuration and advanced settings.
Download Controller Manual (PDF, 3.8MB) (opens in new tab)

This manual covers:

• Touchscreen controller interface guide
• WiFi module installation and pairing
• NorsupOne app setup (iOS and Android)
• Remote control features and scheduling
• Operating modes explained (Power/Smart/Silent)
• Timer programming
• Temperature settings and optimization
• Troubleshooting WiFi connectivity issues

📄 Technical Datasheet

Concise 2-page technical specification sheet with performance data, dimensions, and comparison table for all Norsup P-Series inverter heat pump models (P13X through P35X).
Download Technical Datasheet (PDF, 185KB) (opens in new tab)

This datasheet includes:

• Heating capacity at various ambient temperatures
• COP values across all operating conditions
• Electrical specifications and requirements
• Pool volume recommendations
• Physical dimensions and weights
• Quick-reference comparison between models

❓ Frequently Asked Questions

Q: How much will it cost to run my pool with this heat pump?

A: Running costs vary significantly based on pool size, target temperature, ambient conditions, and usage patterns. As a guideline:

• Summer months (June-August): £50-80 per month to maintain 28°C
• Spring/Autumn (April-May, September-October): £120-180 per month
• Year-round heated pools: £800-1,200 annually

The inverter technology means this heat pump is approximately 30% more economical than fixed-speed models. Using the silent mode at night on Economy 7 tariffs can further reduce costs by 20-30%.

Q: Can I install this heat pump myself?

A: While the water connections can be made by a competent DIYer using standard 50mm PVC plumbing, electrical connection must be performed by a qualified electrician registered with a competent person scheme (e.g., NICEIC, NAPIT). The unit requires:

• Dedicated 32A circuit breaker
• 30mA RCD protection
• Minimum 6mm² cable
• Proper earthing and bonding

Professional installation is strongly recommended to ensure warranty validity and compliance with UK building regulations.

Q: How long does it take to heat my pool from cold?

A: Initial heat-up times depend heavily on starting temperature, pool volume, and weather conditions. As a realistic example:

• 80m³ pool from 12°C to 28°C (16°C rise): Approximately 60-75 hours of continuous operation
• Once at temperature: Unit modulates down to maintenance mode, using just 10-20% of maximum power

Pro Tip: Start heating 3-4 days before you plan to use your pool, and always use a thermal cover when not swimming to retain heat.

Q: Will this work during a British winter?

A: Yes, but with reduced efficiency. The P26X/32 operates down to -15°C ambient temperature, but:

• Below 10°C: Efficiency drops (COP 4.0-5.6 vs. summer’s COP 12-16)
• Below 0°C: Defrost cycles become more frequent
• Below -10°C: Heating capacity is significantly reduced

Best Use: This model is ideal for extending your season from April to October. For year-round heated pools in the UK, consider supplementary heating or a larger model during peak winter.

Q: Is the WiFi module included, and does it require a subscription?

A: Yes, the WiFi module comes pre-installed at no extra cost. The NorsupOne app is completely free to use with no subscription fees. You’ll need:

• Home WiFi network (2.4GHz band)
• Smartphone or tablet (iOS 10+ or Android 5.0+)
• Free NorsupOne app (available on App Store and Google Play)

Features include remote temperature control, scheduling, energy monitoring, and push notifications for errors or maintenance needs.

Q: How quiet is “silent mode” really?

A: In silent mode, the P26X/32 measures just 26dB at 10 meters – comparable to rustling leaves or a whisper. For context:

• 26dB: Can barely be heard over ambient outdoor noise
• Below 30dB: Considered suitable for residential areas at night
• Below 40dB: Quieter than most refrigerators

Many customers run silent mode overnight on economy tariffs without any noise complaints from neighbors.

Q: What maintenance does this heat pump require?

A: Regular maintenance is minimal but essential:

Monthly:

• Visual inspection for debris around air intake
• Check condensate drain is flowing freely

Every 3 Months:

• Clean or rinse evaporator fins (hose down gently)
• Check water filter in pool system
• Verify correct water flow rate

Annually (Professional Service Recommended):

• Refrigerant pressure check
• Electrical connections inspection
• Fan motor lubrication
• Controller software update
• Complete system performance test

Cost: Professional annual service typically £80-150.

Q: What’s the difference between this and a cheaper non-inverter heat pump?

A: Inverter vs. non-inverter is a significant difference:

Inverter (This Model):

• ✅ Variable speed 6.8-26kW (adjusts to conditions)
• ✅ 30% more efficient (higher COP across all conditions)
• ✅ Much quieter operation (variable fan speed)
• ✅ Longer lifespan (less on/off cycling stress)
• ✅ More consistent temperature (±0.5°C)

Non-Inverter:

• ❌ Fixed speed 26kW (always 100% or off)
• ❌ Lower average COP (more cycling losses)
• ❌ Noisier (fixed high fan speed)
• ❌ More wear on compressor
• ❌ Temperature swings (±2°C)

Payback: The additional cost of inverter technology typically pays for itself within 2-3 years through reduced electricity bills.

Q: Can this heat pump also cool my pool?

A: Yes! The P26X/32 has reversible operation for pool cooling, which can be useful for:

• Hydrotherapy pools requiring precise cool temperatures
• Hot summers when water temperature exceeds 30°C
• Indoor pools where cooling may be needed year-round

Cooling capacity is approximately 80% of heating capacity (20-22kW range).

Q: What warranty is included?

A: Comprehensive warranty coverage:

• 4 years on complete heat pump unit
• 10 years on compressor
• 10 years on titanium heat exchanger
• 2 years on electronic controls and WiFi module

Conditions: Warranty requires professional installation, annual servicing, and registration within 30 days of purchase. Extended warranty options available.

Q: Will this work with my existing pool system?

A: The P26X/32 is compatible with most pool filtration systems. Requirements:

• Pool pump: Minimum 12m³/h flow rate (most 1HP+ pumps suitable)
• Filter: Any type (sand, cartridge, DE) in good condition
• Pipework: 50mm (2″) diameter or adaptable with reducers
• Space: Clearances listed above available

Special Cases:

• Salt chlorinator systems: ✅ Fully compatible (titanium heat exchanger)
• Ozone systems: ✅ Compatible (install heat pump upstream)
• UV systems: ✅ Compatible (install heat pump upstream)

Q: How does the defrost cycle work?

A: When ambient temperature drops below 5°C and humidity is high, frost can form on the evaporator coils. The automatic defrost cycle:

1. Reverses refrigerant flow for 3-8 minutes
2. Melts any frost accumulation
3. Resumes normal heating operation

Impact: During defrost, heating pauses briefly. In cold weather (below 5°C), defrost cycles may occur every 45-90 minutes. This is normal and automatic – no user intervention required.

Q: Can I use this with an economy electricity tariff?

A: Absolutely! The WiFi controller allows sophisticated scheduling:

• Set heating to run during Economy 7 off-peak hours (typically 00:30-07:30)
• Use silent mode for night operation
• Programmable timer with daily/weekly schedules
• Potential savings: 20-40% on running costs

Tip: Heat the pool overnight and use a good thermal cover during the day to retain heat without running the heat pump during expensive peak hours.

🏆 Warranty & Support

Comprehensive Warranty Coverage

4-Year Manufacturer Warranty

• Complete unit coverage including all components
• Parts and labor included
• UK-based warranty support

10-Year Compressor Warranty

• Mitsubishi rotary compressor fully covered
• Extends to refrigerant circuit components
• Most expensive component protected long-term

10-Year Heat Exchanger Warranty

• Titanium tube and PVC housing covered
• Protection against corrosion and chemical damage
• Critical to longevity of unit

2-Year Electronics Warranty

• Touchscreen controller
• WiFi module and connectivity
• All PCB boards and sensors

Warranty Conditions

To validate your warranty:

1. ✅ Professional installation by qualified electrician
2. ✅ Registration within 30 days of purchase
3. ✅ Annual professional servicing recommended (required for extended warranty)
4. ✅ Proper water chemistry maintained (pH 7.2-7.6, chlorine <3ppm)
5. ✅ Installation complies with manufacturer guidelines

Unpacking Tips:

• Keep packaging until installation complete
• Inspect for damage before installer leaves
• Have two people available for moving into position
• Protect unit from weather if storing before installation

📞 Need Help Choosing?

Not sure if the P26X/32 is right for your pool?

Our team of pool heating specialists can help you:

• Calculate exact heat-up times for your pool
• Estimate annual running costs
• Recommend the correct model size
• Source compatible installation accessories
• Find qualified installers in your area

✅ Ready to Transform Your Pool Experience?

The Norsup P26X/32 represents the perfect balance of performance, efficiency, and value. With intelligent inverter technology, ultra-quiet operation, and comprehensive WiFi control, you’ll wonder why you didn’t upgrade sooner.

Every day you wait is another day of higher energy bills or a cold pool!