LX WP200-II Dual Speed Pump: Elevate Your Hot Tub Experience

Introduction

As a dedicated hot tub enthusiast and parts supplier, I’m excited to introduce you to the LX WP200-II Dual Speed Pump. This versatile 2HP powerhouse is designed to revolutionize your hot tub experience, offering both powerful performance and energy-efficient operation.

Alternative Numbers

6500-291, 6500-299, 6500-319, 6500-700, 6500-791 and 6500-899

Watkins / HotSpring: 0965901-03. Replaces 37066
Volition: 20PW
Wellis: ACM0594
Jazzi: JAPU10

The Ultimate Dual-Purpose Pump

The LX WP200-II isn’t just a pump; it’s a game-changer for your hot tub system. Functioning as both a jet pump and a 2-speed filtration pump, this unit offers the best of both worlds. Whether you’re looking to replace an aging pump or upgrade your current setup, the WP200-II delivers the flexibility and performance you need.

Key Features

Dual Speed Functionality

With its dual-speed motor, the WP200-II offers unparalleled versatility. Use the high-speed setting for powerful jet action and the low-speed setting for quiet, energy-efficient filtration and heating.

Impressive Performance

Boasting a 2HP motor, the WP200-II delivers exceptional water flow at high speed, ensuring your hot tub jets provide that perfect massage experience. The low-speed setting offers efficient circulation for filtration and heating, helping to keep your hot tub clean and warm while minimizing energy consumption.

Wide Compatibility

The WP200-II is a popular choice for a variety of spa brands. It’s commonly used in Chinese Spas and Coasts spas (not to be confused with the American brand “Coast Spas”). It’s also known to be used in some Jacuzzi models and many others, making it a versatile replacement option.

Easy Installation

The pump comes with a plain 4-core cable attached (2 x Phase, 1 x Common Neutral + Earth), simplifying the electrical connection process. Its 2-inch plumbing connections are interchangeable with other brands, ensuring compatibility with most hot tub setups.

Built for Reliability

LX has a reputation for producing durable, high-quality water pumps, and the WP200-II is no exception. Its robust construction is designed to withstand the demands of regular hot tub use, providing you with years of dependable service.

Specifications Table

Specification	Detail
Type of Product	Water pump / Jet pump, 2 speed filtration pump
Manufacturer	LX30
Common Power Reference	2 HP
Voltage	230V
Frequency	50 Hz
Motor HP (Low / High)	0.26 / 1.25
Amperage (Low / High)	2.4 / 7.0
RPM (Low / High)	1450 / 2900
Capacitor	30 uf
Plumbing Connections	2 inch (outside diameter of male threaded wet end connection is 78mm approx)
Electrical Connections	Comes with plain 4 core cable attached. 2 x Phase, 1 x Common Neutral + Earth
Dimensions	Length: 435 mm, Height: 235 mm, Depth: 200 mm

Perfect for DIY Enthusiasts

As someone who enjoys working on hot tubs, I appreciate the user-friendly design of the LX WP200-II. Its standard connections and straightforward setup make it an excellent choice for DIY hot tub maintenance and upgrades.

Energy Efficiency

The dual-speed functionality of the WP200-II allows for significant energy savings. By running at low speed for filtration and heating, you can maintain your hot tub’s cleanliness and temperature while minimizing power consumption.

Quiet Operation

When running at low speed, the WP200-II operates quietly, allowing you to enjoy the tranquil ambiance of your hot tub without disruptive noise.

Conclusion

The LX WP200-II Dual Speed Pump is a powerful, versatile, and efficient addition to your hot tub system. Whether you’re replacing an old pump or looking to enhance your hot tub’s performance and energy efficiency, this 2HP dual-speed pump is up to the task. With its robust construction and flexible application, it’s an investment that will elevate your hot tub experience for years to come.

Remember, proper installation and regular maintenance are key to getting the most out of your new pump. If you have any questions about the LX WP200-II or need advice on installation, don’t hesitate to reach out. I’m here to help you make the most of your hot tub experience!

The hot tub indistry doesnt make it easy for you when you are trying to match up the size of the unions (the part that screws your pipe work onto the pumps) Below you can see the physical sizes of the collars, and how they relate to the actual union size you need. So a measurement of 2.5", edge to edge on the collar of the pump is actually a 1.5" union - confusing - absolutely! If you are not sure, give me a shout!

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.
2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)
3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.
4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.
5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.
6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.
7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.
8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.
9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.
10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.
11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.
12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.
13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.
14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.
15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.
2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.
3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.
4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.
5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.