🏊 LX SWIM025 Swimming Pool Pump – 0.5 HP Self-Priming

Efficient and reliable water circulation for smaller swimming pools

💧 Product Overview

The LX SWIM025 is a compact self-priming swimming pool pump designed for efficient water circulation in smaller pool systems. With a 0.5 HP motor delivering 0.37 kW of power, this single-speed pump provides reliable filtration flow for above-ground pools, small in-ground pools, and pool auxiliary systems.

Featuring durable construction with a stainless steel motor shaft and corrosion-resistant aluminium housing, the SWIM025 is built to withstand the demands of continuous pool operation. The self-priming design allows the pump to draw water even when installed above water level, providing flexible installation options.

Operating at 230V/50Hz with a modest 1.9A current draw, this energy-efficient pump delivers consistent water flow whilst keeping running costs low. The 1.5″ (50mm) plumbing connections provide easy integration with standard pool filtration systems.

⭐ Key Features

✅ Self-Priming Design – Can be installed above water level

✅ 0.5 HP Motor – Efficient power for smaller pools

✅ 0.37 kW Power Rating – Low energy consumption

✅ 1.9A Current Draw – Economical operation

✅ Stainless Steel Shaft – Corrosion resistant motor shaft

✅ Aluminium Housing – Lightweight and durable construction

✅ 1.5″ Plumbing – Standard 50mm connections

✅ Single Speed – Simple, reliable operation

✅ Compact Design – 560mm × 275mm × 390mm

✅ 230V / 50Hz – UK standard electrical supply

⚙️ Technical Specifications

Specification	Value
Product Type	Self-Priming Pool Pump
Brand	LX
Model	SWIM025
SKU	PP-SWP50
Motor Power	0.5 HP
Power (kW)	0.37 kW
Speed Settings	Single Speed
Voltage	230 V
Frequency	50 Hz
Amperage	1.9 A
Plumbing Size	1.5″ (50 mm)
Length	560 mm
Width	275 mm
Height	390 mm
Motor Shaft	Stainless Steel
Housing Material	Aluminium

⚡ Electrical Requirements

Electrical Specification	Value
Supply Voltage	230 V
Frequency	50 Hz
Full Load Amps	1.9 A
Power Rating	0.37 kW
Phase	Single Phase

Component	Specification
Recommended MCB	6 A minimum
Recommended Cable	1.0 mm² minimum

⚠️ IMPORTANT ELECTRICAL SAFETY:

All electrical work must be carried out by a qualified electrician in accordance with UK wiring regulations (BS 7671). Outdoor pool pump installations require appropriate weatherproof enclosures and RCD protection (30mA). Ensure proper earthing and bonding of all electrical components.

🔗 Compatibility Guide

This Pump Specifications:

📍 Brand: LX 📍 Model: SWIM025 📍 Type: Self-Priming Pool Pump 📍 Motor Power: 0.5 HP / 0.37 kW 📍 Plumbing: 1.5″ (50mm) 📍 Voltage: 230V / 50Hz 📍 Current: 1.9A 📍 Dimensions: 560mm × 275mm × 390mm

Plumbing Connections:

Connection	Size
Inlet	1.5″ (50 mm)
Outlet	1.5″ (50 mm)

Suitable For:

• Above-ground swimming pools
• Small in-ground pools
• Pool filtration systems
• Water features and fountains
• Auxiliary pool circulation

🛠️ Installation Requirements

Pump Dimensions:

Dimension	Measurement
Length	560 mm
Width	275 mm
Height	390 mm

Plumbing Connections:

Connection	Size
Inlet	1.5″ (50 mm)
Outlet	1.5″ (50 mm)

Installation Notes:

✅ Self-priming – can be installed above water level

⚠️ Prime pump before first use

⚠️ Ensure strainer basket is clean before operation

⚠️ Install on solid, level base

⚠️ Provide adequate ventilation around motor

⚠️ Protect from weather with suitable enclosure

⚠️ Ensure proper electrical bonding to earth

💡 Maximum suction lift – refer to manufacturer documentation

💡 Install isolation valves for easy maintenance

💡 Keep pump accessible for servicing

🔄 Maintenance Guide

Routine Maintenance:

Task	Frequency	Notes
Clean strainer basket	Weekly	Remove leaves and debris
Check for leaks	Weekly	Inspect unions and seals
Inspect pump lid o-ring	Monthly	Replace if worn or cracked
Check motor ventilation	Monthly	Keep vents clear
Inspect plumbing connections	Monthly	Tighten if needed
Check amperage	Annually	Should match 1.9A rating

Warning Signs – Service Required:

• Pump losing prime frequently
• Unusual noise (grinding, screeching)
• Water leaking from pump housing
• Motor overheating
• Reduced water flow
• Motor trips circuit breaker

Winterisation:

⚠️ Drain pump completely before freezing temperatures

⚠️ Remove and store drain plugs

⚠️ Protect from frost damage

🎯 Ideal Applications

Application	Suitability	Notes
🏊 Above-ground pools	Excellent	Ideal size and power
🏊 Small in-ground pools	Good	Up to ~30m³ capacity
🏊 Pool filtration	Excellent	Continuous circulation
💧 Water features	Good	Fountains, waterfalls
💧 Auxiliary circulation	Good	Secondary systems

❓ Frequently Asked Questions

Q: What size pool is this pump suitable for? A: The LX SWIM025 0.5 HP pump is designed for smaller swimming pools, typically above-ground pools or small in-ground pools. Contact Parts4Tubs for sizing advice for your specific pool.

Q: Is this pump self-priming? A: Yes, this is a self-priming pump, meaning it can be installed above water level and will draw water up to the pump. Ensure the pump is primed before first use.

Q: What are the plumbing connection sizes? A: The pump has 1.5″ (50mm) inlet and outlet connections, compatible with standard pool plumbing.

Q: How much electricity does this pump use? A: The pump draws 1.9A at 230V, with a power rating of 0.37 kW. This makes it economical for continuous filtration operation.

Q: Can this pump be used outdoors? A: Yes, but it must be protected from weather with a suitable pump housing or enclosure. Electrical connections must be weatherproof.

Q: What maintenance does this pump require? A: Regular maintenance includes cleaning the strainer basket weekly, checking for leaks, and ensuring motor ventilation is clear. See the maintenance guide above.

Q: What warranty is included? A: Contact Parts4Tubs for warranty information and terms.

🏆 Why Choose the LX SWIM025 Pool Pump

✅ Self-Priming – Flexible installation options

✅ Energy Efficient – Low 1.9A current draw

✅ Durable Construction – Stainless steel shaft, aluminium housing

✅ Compact Size – Fits in tight spaces

✅ Reliable LX Brand – Proven pump manufacturer

✅ Standard Connections – 1.5″ plumbing for easy installation

✅ Low Running Costs – 0.37 kW power consumption

✅ Quiet Operation – Suitable for residential use

🤝 Why Buy From Parts4Tubs

✅ UK-based company with expert local support

✅ Fast UK delivery options available

✅ Knowledgeable advice from water equipment specialists

✅ Competitive pricing

✅ Full warranty support

✅ Replacement parts and accessories available

✅ Easy returns within 30 days

✨ Summary

The LX SWIM025 is a compact 0.5 HP self-priming swimming pool pump designed for efficient water circulation in smaller pool systems. Featuring durable construction with stainless steel motor shaft and aluminium housing, this single-speed pump delivers reliable performance with low energy consumption. The 0.37 kW power rating draws just 1.9A at 230V/50Hz, keeping running costs economical. Standard 1.5″ (50mm) plumbing connections ensure easy integration with pool filtration systems. Compact dimensions of 560mm × 275mm × 390mm allow installation in tight spaces. Ideal for above-ground pools, small in-ground pools, and auxiliary circulation systems. Self-priming design allows flexible installation above water level.