InverX Horizontal 40kW 3-Phase Commercial Pool Heat Pump – IXR110T 🌊

The Ultimate Commercial Pool Heating Solution with Revolutionary TurboSilence Technology

Transform your commercial pool operation with the InverX Horizontal 40kW Heat Pump – the most advanced commercial-grade pool heating system on the market. Engineered specifically for large commercial pools, aquatic centers, hotels, and resorts, this powerhouse unit delivers exceptional heating performance up to 120% capacity while maintaining whisper-quiet operation that won’t disturb guests or neighbors.

🔥 Revolutionary TurboSilence Technology Explained

The InverX heat pump doesn’t just use standard inverter technology – it features patented TurboSilence Tech control that represents a genuine breakthrough in pool heating:

How It Works: Traditional inverter heat pumps balance between power and noise. TurboSilence technology achieves both simultaneously through intelligent optimization of:

• Compressor inverter control with variable speed operation
• Advanced heat exchange technology with hexagonal honeycomb design
• Real-time adaptive performance based on ambient conditions and pool temperature

The Result:

• Turbo Performance – Generate up to 120% heating capacity when you need rapid temperature rise
• Silence Operation – 10x quieter than conventional inverter pumps (as low as 18.8 dB at 10m distance)
• Smart Efficiency – Operates at just 50% capacity to maintain temperature after initial heat-up, drastically reducing energy consumption

Three Intelligent Operating Modes:

🚀 Turbo Mode (120% Capacity)
When: Season start, cold days, rapid heating needed
Performance: 42.0 kW heating output for fastest temperature rise
Best for: Getting pools ready quickly for scheduled events

⚡ Smart Mode (100-20% Capacity)
When: Normal daily operation
Performance: Intelligently adjusts from 36.5 kW down to 20% based on demand
Best for: Optimal balance of heating speed and energy efficiency

🌙 Silence Mode (60-20% Capacity)
When: Nighttime operation, noise-sensitive environments
Performance: Ultra-quiet operation while maintaining temperature
Best for: Hotels, resorts, residential areas with noise restrictions

🎯 Key Benefits That Matter

For Commercial Pool Operators:

• Slash Operating Costs – Superior COP ratings mean significantly lower electricity bills compared to traditional heating
• Faster Pool Readiness – Turbo mode brings your pool to temperature 20% faster, maximizing usable pool time
• Guest Satisfaction – Ultra-quiet operation won’t disturb hotel guests or residential neighbors
• Extended Season – Operate year-round economically with efficiency maintained even in cold conditions
• Remote Management – Monitor and adjust settings via smartphone without visiting the equipment room

For Property Managers:

• Reduced Maintenance – Integrated control system means fewer breakdowns and easier servicing
• Flexible Scheduling – Set automated heating schedules to match facility usage patterns
• Energy Tracking – Monitor consumption patterns and optimize for cost savings
• Modern Aesthetics – Distinctive hexagonal design looks professional in visible equipment areas

📥 Downloads & Documentation

📥 Installation & User Manual (29 pages)
Download InverX Installation & User Manual PDF (opens in new tab)
Complete installation instructions, wiring diagrams, operation guide, maintenance procedures, troubleshooting, WiFi setup, and technical specifications. Essential reading for installers and owners.

📥 Technical Specifications Sheet (1 page)
Download InverX Specifications PDF (opens in new tab)
Detailed performance data across all InverX models including COP ratings at various conditions, power consumption, dimensions, and recommended pool volumes.

📊 Pool Sizing & Heating Performance Guide

Recommended Pool Volumes:

Pool Size	Volume	Suitability	Typical Application
Small Commercial	90-110m³	✅ Excellent	Boutique hotel pools, fitness center pools
Medium Commercial	110-140m³	✅ Ideal	Hotel pools, apartment complex pools
Large Commercial	140-160m³	✅ Recommended	Resort pools, aquatic centers (primary pool)
Extra Large	160m³+	⚠ Consider multiple units	Olympic-size or very large resort pools

⏱ Estimated Heat-Up Times

Practical heating time estimates to help you plan pool operations:

Temperature Rise: 5°C (e.g., 20°C → 25°C)

Pool Volume	Turbo Mode	Smart Mode	Notes
100m³	~14 hours	~16 hours	Typical hotel pool
120m³	~17 hours	~19 hours	Medium commercial
140m³	~20 hours	~23 hours	Large resort pool
160m³	~23 hours	~26 hours	Maximum capacity

Temperature Rise: 10°C (e.g., 18°C → 28°C)

Pool Volume	Turbo Mode	Smart Mode	Notes
100m³	~28 hours	~32 hours	Spring opening
120m³	~33 hours	~38 hours	Season start
140m³	~39 hours	~45 hours	Cold start
160m³	~46 hours	~53 hours	Full recovery

💡 Important Notes:

• Times calculated using formula: Time (hours) = (Pool Volume m³ × Temperature Rise °C × 1.16) ÷ Heat Pump kW
• These are estimates – actual times vary based on ambient temperature, wind exposure, pool cover usage, and starting conditions
• Using a pool cover can reduce heating times by 40-60%
• Turbo mode provides approximately 15-20% faster heating than Smart mode
• Performance is best at air temperatures 15-28°C
• For fastest results: Use Turbo mode + pool cover + good insulation

💰 Running Cost Comparison & Savings

Why Heat Pumps Save Money:

A heat pump doesn’t generate heat – it moves heat from the air into your pool water. For every 1 kW of electricity consumed, the InverX delivers 5.3 to 16.3 kW of heating (depending on conditions).

Typical Annual Cost Comparison (140m³ pool, 8-month season):

Heating Method	Annual Cost*	vs. Electric	vs. Gas
InverX Heat Pump (COP 7.9)	€2,400	—	—
Electric Resistance Heater	€19,200	+700% ❌	—
Gas Boiler (85% efficient)	€8,500	+254% ❌	+254% ❌
Oil Heating	€9,800	+308% ❌	+292% ❌

*Based on typical commercial usage, €0.20/kWh electricity, maintaining 28°C pool temperature

💡 Payback Period: Most commercial installations see payback in 2-3 years compared to gas heating, 1-2 years compared to electric.

🔧 Complete Technical Specifications

Performance Specifications

Specification	Details
Model Number	InverX Horizontal IXR110T
Heating Capacity (Smart Mode)	36.5 kW @ Air 28°C, Water 26°C
Heating Capacity (Turbo Mode)	42.0 kW @ Air 28°C, Water 26°C
Heating Capacity (15°C Air)	24.5 kW (Smart) / 28.5 kW (Turbo)
COP Range	16.3 to 6.9 (varies with conditions)
COP @ 50% Capacity	12.0 (exceptional efficiency)
COP @ Air 15°C	5.3 (Smart Mode)
Cooling Capacity	18.0 kW @ Air 32°C, Water 28°C

Electrical Specifications

Specification	Details
Power Supply	400V / 3-Phase / 50Hz
Rated Input Power	0.60-5.94 kW (variable)
Rated Current	0.87-8.57 A
Required Breaker	15A with 30mA residual current protection
Required Fuse	15A
Power Cable Size	5 × 2.5 mm² (for cable ≤10m)
Signal Cable	3 × 0.5 mm² (extendable to 50m)

Environmental & Operating Specifications

Specification	Details
Operating Air Temperature	-15°C to +43°C
Temperature Setting Range (Heating)	18°C to 40°C
Temperature Setting Range (Cooling)	12°C to 30°C
Ideal Operating Range	Air 15-25°C for best efficiency
Refrigerant Type	R32 (environmentally friendly)
Refrigerant Charge	3,200 grams
CO₂ Equivalent	2.160 tonnes
GWP Rating	675 (lower than older refrigerants)

Water Flow & Hydraulic Specifications

Specification	Details
Recommended Water Flow	12-18 m³/hour
Maximum Water Flow	18 m³/hour
Minimum Water Flow	12 m³/hour
Water Connection Size	50mm (inlet and outlet)
Heat Exchanger Type	Spiral titanium tube in PVC housing
Connection Type	Union fittings (must use hard pipe, not soft hose)

Physical Specifications & Dimensions

Specification	Details
Unit Dimensions (L×W×H)	1,260 × 539 × 947 mm
Net Weight	126 kg
Casing Material	High-grade aluminum with powder coating
Design Feature	Patented hexagonal honeycomb structure
Color	Anthracite grey / Black

Noise Specifications

Specification	Details
Sound Pressure @ 1m	42.5-51.7 dB(A) at full capacity
Sound Pressure @ 1m (50% capacity)	43.8 dB(A) (whisper-quiet)
Sound Pressure @ 10m	22.8-34.0 dB(A)
Noise Comparison	Quieter than normal conversation (60 dB)

Control & Connectivity

Specification	Details
Control Interface	Intelligent color touchscreen
WiFi Connectivity	Built-in WiFi module (2.4 GHz)
Smart App	iOS and Android compatible
Temperature Display	Switchable °C / °F
Screen Lock	Child lock function included
Smart Features	Timer, scheduling, remote monitoring, energy tracking

Recommended Pool Specifications

Specification	Details
Advised Pool Volume	90-160 m³
Ideal Coverage	120-140 m³ pools
Pool Type Suitability	Commercial pools, hotel pools, resort pools, aquatic centers

🎨 Innovative Hexagon Honeycomb Design

The InverX isn’t just powerful – it’s beautifully engineered with a patented hexagonal honeycomb design that delivers multiple benefits:

Performance Benefits:

• Maximized Heat Exchange – Hexagonal pattern creates the largest possible surface area in the most compact footprint
• Optimized Airflow – Honeycomb structure reduces air resistance while maximizing air movement
• Enhanced Durability – Distributed stress patterns prevent weak points and extend lifespan
• Efficient Operation – Superior heat transfer means more heating per watt consumed

Practical Benefits:

• Distinctive Appearance – Modern, professional aesthetics suitable for visible installations
• Compact Footprint – Maximum performance in minimum space
• Better Weight Distribution – Structural integrity and stability

Why Choose the InverX IXR110T?

✅ Commercial Power – 40kW heating capacity handles pools up to 160m³
✅ Revolutionary TurboSilence Tech – 10x quieter than standard inverter pumps
✅ Rapid Heating – 20% faster pool warm-up with Turbo mode
✅ Exceptional Efficiency – COP up to 16.3 in optimal conditions
✅ Smart WiFi Control – Manage your pool heating from anywhere
✅ Year-Round Operation – Works efficiently from -15°C to +43°C
✅ Eco-Friendly – Uses R32 refrigerant with low environmental impact
✅ 3-Phase Power – Professional installation for demanding applications

📱 Smart WiFi Control & Monitoring

Control Your Pool Heating From Anywhere in the World

The built-in WiFi module (no additional cost) connects your heat pump to your smartphone for complete remote management:

Key Smart Features:

🌐 Remote Access

• Monitor current pool temperature in real-time
• Adjust target temperature from anywhere
• Switch between Turbo/Smart/Silence modes remotely
• Turn heat pump on/off via app

⏰ Intelligent Scheduling

• Create custom heating schedules for different days
• Automatically heat before facility opening times
• Reduce heating during closed hours
• Optimize for off-peak electricity rates

📊 Energy Monitoring

• Track daily, weekly, and monthly energy consumption
• View historical performance data
• Analyze efficiency patterns
• Calculate operating costs

🔔 Proactive Alerts

• Receive maintenance reminders
• Get notified of any system alerts
• Temperature achievement notifications
• Low flow warnings

Easy Setup:

• Download the free Fairland app (iOS/Android)
• Connect heat pump to your 2.4 GHz WiFi network
• 3-minute setup process via touchscreen
• Share access with staff or family members

🏊 Perfect for Commercial Applications

Designed Specifically for Demanding Commercial Environments:

✅ Hotels & Resorts – Maintain perfect pool temperature for guest satisfaction while managing costs
✅ Aquatic Centers – Reliable heating for high-usage public facilities
✅ Fitness Centers – Year-round pool operation for member retention
✅ Apartment Complexes – Efficient heating for shared residential pools
✅ Holiday Parks – Extended season operation with manageable energy costs
✅ Rehabilitation Facilities – Precise temperature control for therapeutic pools
✅ Schools & Universities – Cost-effective heating for educational swimming facilities

Commercial Advantages:

💼 Operational Flexibility

• 3-phase power handles demanding schedules
• Quick recovery after heavy usage
• Multiple operating modes for different scenarios
• Year-round capability

💰 Cost Management

• Predictable operating expenses
• Significantly lower than gas or electric resistance
• Energy tracking for budget forecasting
• Reduced maintenance costs

🔇 Noise Considerations

• TurboSilence technology minimizes guest disturbance
• Silence mode for nighttime operation
• Suitable for urban and residential locations

🌍 Sustainability Goals

• Reduced carbon footprint vs. fossil fuel heating
• R32 refrigerant has low environmental impact
• Help meet corporate sustainability targets
• Attractive to eco-conscious guests

⚙️ Installation Requirements & Considerations

Professional Installation Essential for Commercial Units

Due to the 40kW capacity and 3-phase electrical requirements, professional installation by qualified technicians is mandatory for safety and optimal performance.

Electrical Requirements

✅ 3-Phase Power Supply Required

• 400V / 3-Phase / 50Hz supply
• 15A circuit breaker with 30mA RCD protection
• 15A fuse rated
• 5 × 2.5mm² power cable (for runs ≤10m)
• Must be hard-wired (no plug connection)
• Requires qualified commercial electrician

Location & Clearance Requirements

Minimum Clearance Distances:

Side	Minimum Clearance	Recommended
Air Inlet (Front)	300mm	500mm+
Air Outlet (Rear)	300mm	500mm+
Left Side	300mm	400mm
Right Side	300mm	400mm
Top	1,000mm	1,500mm

Installation Location Requirements:

✅ Essential Requirements:

• Well-ventilated outdoor location
• Solid, level concrete base or steel frame
• Protection from direct water spray
• Away from overhangs that could restrict airflow
• Accessible for maintenance
• Drainage for condensation water

⚠️ Avoid These Locations:

• Enclosed spaces or indoors
• Near sources of fire or ignition
• Areas with restricted air circulation
• Under low eaves or awnings
• Where noise could affect neighbors

Hydraulic Connection Requirements

Water Pipe Specifications:

✅ Required:

• Hard pipe connections – PVC, CPVC, or suitable rigid pipe
• 50mm pipe connections (inlet and outlet)
• Water flow rate: 12-18 m³/hour
• Bypass valve installation strongly recommended
• Maximum pipe run: 10m from pool filter
• Flow switch or pressure switch for protection

❌ Not Permitted:

• Soft flexible hose direct to heat pump unions
• Under-specified pump (must achieve required flow)
• Direct connection without bypass

Recommended Pool System Setup:

Pool → Filter → Heat Pump → Chlorinator/Sanitizer → Return to Pool

Note: Heat pump should be positioned BEFORE chemical dosing to protect titanium heat exchanger

Foundation Requirements

Concrete Base:

• Minimum 100mm thick reinforced concrete
• Level to within 5mm
• Minimum dimensions: 1,400mm × 700mm
• Bolt holes for M10 fixing bolts

Steel Frame Alternative:

• Heavy-duty galvanized steel frame
• Anti-rust treated
• Designed to support 150kg+ load
• Secure to concrete foundation

Additional Components Needed

You will need to supply/install:

• ✅ Water circulation pump (12-18 m³/h capacity)
• ✅ Bypass valve kit (highly recommended)
• ✅ Electrical breaker and wiring
• ✅ Rigid water pipes and fittings
• ✅ Drainage pipe for condensation
• ✅ Professional installation labor

🛡️ Warranty & Support

Commercial-Grade Reliability with Comprehensive Support

• ✅ Manufacturer’s warranty (contact dealer for specific terms)
• ✅ Professional technical support available
• ✅ Genuine spare parts availability
• ✅ Detailed installation and user manual included
• ✅ Comprehensive troubleshooting guides
• ✅ Error code diagnostics for fast resolution

❓ Frequently Asked Questions

General Operation Questions

Q: How does a heat pump work differently from traditional pool heaters?

A heat pump doesn’t generate heat – it transfers heat from the outside air into your pool water using refrigeration technology in reverse. This is why it can deliver 5-16 times more heating energy than the electrical energy it consumes. Think of it like an air conditioner running backwards. Traditional electric heaters convert 1kW of electricity into 1kW of heat (100% efficient). The InverX converts 1kW of electricity into 5.3-16.3kW of heat (530-1630% efficient), which is why running costs are so much lower.

Q: Can this heat pump work in cold weather?

Yes! The InverX IXR110T operates in air temperatures from -15°C to +43°C. While heating output decreases in colder weather (physics limitation), it still delivers 24.5kW of heating at 15°C air temperature with a COP of 5.3, which is excellent. Many commercial operators successfully use this model for year-round pool heating in temperate climates. For best efficiency, the ideal operating range is 15-28°C ambient temperature.

Q: What’s the difference between Turbo, Smart, and Silence modes?

• Turbo Mode runs at 120% capacity (42kW) for rapid heating – perfect for quickly bringing your pool to temperature at season start or after cold weather. It consumes more electricity but heats fastest.
• Smart Mode (default) adjusts between 20-100% capacity based on need. It intelligently balances heating speed with energy efficiency and typically runs at about 50% capacity to maintain temperature once the pool is heated.
• Silence Mode limits output to 60-20% for ultra-quiet operation – ideal for nighttime running in noise-sensitive environments like hotels and residential areas.

Q: How much noise does this heat pump make?

The InverX is remarkably quiet thanks to TurboSilence technology. At 10 meters distance, it produces just 22.8-34.0 dB(A) – quieter than a whisper (30 dB) and much quieter than normal conversation (60 dB). At 1 meter with 50% capacity (typical maintaining temperature), it’s only 43.8 dB(A). This makes it suitable for noise-sensitive commercial installations like hotels, resorts, and residential complexes. For comparison, many older heat pumps produce 55-65 dB at similar distances.

Installation & Setup Questions

Q: Can I install this heat pump myself?

No. This is a 40kW commercial unit requiring 3-phase electrical supply and must be installed by licensed professionals. The installation requires:

• Qualified commercial electrician for 3-phase wiring
• Pool technician for hydraulic connections
• Proper clearances and foundation
• Compliance with local building codes

DIY installation would void warranty and could be dangerous. Professional installation ensures optimal performance and safety.

Q: Does this model require 3-phase power?

Yes, the IXR110T model requires 400V 3-phase power supply, which is standard in commercial facilities but not typically available in residential properties. If you have a residential property, consider the 1-phase InverX models (IXR36, IXR46, IXR56, IXR66, or IXR80) instead. The 3-phase requirement is why this model is designated for commercial applications.

Q: What size pool is this heat pump suitable for?

The IXR110T is designed for pools of 90-160m³. For context:

• 100m³ = approximately 10m × 5m × 2m deep pool (typical hotel pool)
• 120m³ = approximately 12m × 5m × 2m deep (medium commercial pool)
• 140m³ = approximately 14m × 5m × 2m deep (large resort pool)

For pools larger than 160m³, consider multiple units or the larger Inverter+ IPH150T model.

Q: What clearances do I need around the heat pump?

Minimum clearances are 300mm on all sides, but we strongly recommend 500mm+ at front and rear for optimal performance. You also need at least 1 meter clearance above the unit to prevent air recirculation. Good airflow is essential for efficiency – restricted airflow can reduce output by 20-30%.

Performance & Efficiency Questions

Q: What does COP mean and why does it matter?

COP (Coefficient of Performance) is the ratio of heat output to electrical input. A COP of 7.9 means for every 1kW of electricity consumed, the heat pump delivers 7.9kW of heating to your pool. Higher COP = greater efficiency = lower running costs. The InverX achieves COP values of 5.3 to 16.3 depending on ambient conditions, which is exceptional. For comparison:

• Electric resistance heater = COP of 1.0
• Gas boiler = effective COP of ~0.85
• Standard heat pump = COP of 3-5
• InverX heat pump = COP of 5.3-16.3

Q: How long will it take to heat my pool?

This depends on several factors: pool volume, desired temperature rise, ambient temperature, wind exposure, and whether you use a pool cover. As a general guide for a 120m³ pool heating 5°C (20°C to 25°C):

• With Turbo Mode: ~17 hours
• With Smart Mode: ~19 hours
• With pool cover: Reduce times by 40-60%

See the “Estimated Heat-Up Times” section above for detailed tables. Using a pool cover makes the single biggest difference to heating times and running costs.

Q: Should I run the heat pump 24/7 or only when needed?

For commercial operations, most operators run the heat pump continuously during the season in Smart Mode, which automatically reduces to ~50% capacity once target temperature is reached. This maintains consistent temperature with lower energy use. Use Turbo mode only for initial heat-up or recovery after cold periods. For seasonal facilities, you can turn it off overnight and use timer functions to ensure the pool is ready for opening hours.

Costs & Maintenance Questions

Q: What are typical running costs?

This varies significantly based on:

• Local electricity rates
• Pool size and insulation
• Desired temperature
• Climate and season
• Pool cover usage

As a general estimate for a 140m³ pool maintained at 28°C for an 8-month season: approximately €2,400-3,000 annually (assuming €0.20/kWh electricity). This is about 70-80% less than electric resistance heating and 60-70% less than gas heating. Using a pool cover can reduce costs by another 40-60%.

Q: What maintenance does the InverX require?

The InverX is relatively low-maintenance:

Monthly: Visual inspection, clear any debris from air inlets/outlets

Every 3-6 Months: Clean evaporator fins with water spray or soft brush, check electrical connections

Annually: Professional service by qualified technician to check refrigerant levels, electrical components, and overall system performance

Winter (if not operating): Drain water from heat exchanger, power off, protect from elements

The integrated control system reduces breakdowns compared to older heat pumps, and genuine spare parts are readily available.

WiFi & Smart Control Questions

Q: Is the WiFi module extra cost?

No! WiFi connectivity is built-in at no extra cost. You just need to download the free Fairland app (iOS or Android) and connect the heat pump to your 2.4GHz WiFi network. Setup takes about 3 minutes via the touchscreen.

Q: Can multiple users control the same heat pump?

Yes, the administrator can share access with multiple users (staff members, maintenance team, management). This is ideal for commercial operations where different team members need access to monitor or adjust pool heating.

Q: What if I don’t have WiFi at the pool equipment area?

The heat pump works perfectly well without WiFi – all controls are accessible via the touchscreen interface. WiFi just adds convenience for remote monitoring and control. If you want remote access, you could install a WiFi extender or use a mobile hotspot device near the heat pump.

Technical Questions

Q: What refrigerant does this use and why does it matter?

The InverX uses R32 refrigerant, which is one of the most environmentally friendly refrigerants available for heat pumps. Compared to older R410A or R407C refrigerants:

• Lower GWP (Global Warming Potential): 675 vs 2,088 for R410A (68% lower)
• Better thermodynamic properties = higher efficiency
• Easier to recycle
• Becoming the industry standard for heat pumps

This means lower environmental impact and better performance.

Q: Why is the heat exchanger made of titanium?

Titanium is used because it’s virtually immune to corrosion from pool water chemistry (chlorine, salt, pH variations). Copper or stainless steel heat exchangers can corrode over time, especially with salt water or improper water chemistry. Titanium ensures long life even in harsh conditions, making it ideal for commercial applications with consistent heavy use.

Q: Can this heat pump cool the pool as well as heat it?

Yes! The IXR110T has a cooling mode that can deliver 18.0kW of cooling capacity. This is useful for:

• Hot summer days when pool temperature exceeds comfortable levels
• Indoor pools that overheat from dehumidification systems
• Commercial facilities in hot climates

Simply switch to cooling mode via the control panel or app.

🌍 Environmental Benefits & Sustainability

Choose Eco-Friendly Pool Heating Without Compromise

Reduced Carbon Footprint:

• Heat pumps emit 75-80% less CO₂ than fossil fuel heating
• R32 refrigerant has 68% lower GWP than older refrigerants
• Exceptional efficiency reduces overall energy consumption
• Uses renewable energy (heat from ambient air)

Corporate Sustainability:

• Helps facilities meet carbon reduction targets
• Supports ESG (Environmental, Social, Governance) goals
• Attractive to eco-conscious guests and members
• Positive PR for green initiatives

Energy Efficiency Awards:

• COP values up to 16.3 represent industry-leading efficiency
• Qualifies for green energy certifications
• May be eligible for commercial energy grants or incentives

📦 What’s Included in the Box

✅ InverX Horizontal 40kW Heat Pump (IXR110T)
✅ 2× 50mm Water Union Connectors
✅ Condensation Drainage Tube
✅ Installation & User Manual
✅ WiFi Setup Guide
✅ Mounting Bracket Accessories
✅ Warranty Documentation

You Will Need to Supply:

• 3-phase electrical supply and installation
• Water circulation pump (12-18 m³/h capacity)
• Rigid water pipes (50mm)
• Bypass valve kit (recommended)
• Concrete base or mounting frame
• Professional installation labor

⚡ Technical Excellence You Can Trust

InverX represents 5 years of research and development by Fairland, a leading name in pool heating technology. The IXR110T combines:

✅ Patented TurboSilence technology
✅ Proven inverter compressor reliability
✅ Commercial-grade components
✅ Titanium heat exchanger durability
✅ Advanced control algorithms
✅ Comprehensive safety features
✅ Real-world tested in thousands of commercial installations worldwide

🛒 Ready to Transform Your Pool Heating?

The InverX Horizontal 40kW is the smart choice for:

• Commercial pool operators seeking lower running costs
• Hotels and resorts prioritizing guest satisfaction and noise levels
• Facilities requiring reliable year-round heating
• Property managers wanting remote monitoring and control
• Organizations with sustainability goals