🎛️ Gecko IN.K800 Topside Panel – Premium Ten-Button Main Control with Three Pumps and Dual Auxiliary for IN.Y & IN.X Systems

The ultimate feature-rich main topside featuring ten dedicated buttons, three-pump control, dual auxiliary outputs, and comprehensive spa management for Gecko IN.Y and IN.X series systems

📋 Product Overview

The Gecko IN.K800 Topside Panel (TS-AE800) represents the pinnacle of Gecko’s button-based spa control technology. Featuring an impressive ten-button interface with dedicated Settings and Mode buttons, three pump controls (P1, P2, P3), dual auxiliary outputs (AUX1, AUX2), lighting, and Up/Down temperature control, the IN.K800 delivers complete spa management for feature-rich hot tubs.

Measuring an impressive 222 mm × 108 mm with a generous 3 metre cable, the IN.K800 is one of the largest panels in the Gecko range. Designed specifically for Gecko IN.Y and IN.X series spa systems, it provides comprehensive control for premium spas with multiple pumps and auxiliary equipment such as blowers, ozonators, or additional accessories.

Operating at 12V and connecting via Gecko’s proprietary IN.LINK system, the IN.K800 delivers safe, reliable control with an LED screen for temperature and status display. A drilling template and comprehensive technical manual are available for download. Important: This touchpad must be installed on the outside edge of the hot tub.

⭐ Key Features

• ✅ Ten-Button Interface – Most comprehensive button layout
• ✅ Three-Pump Control – P1, P2, P3 for complete hydrotherapy
• ✅ Dual Auxiliary Outputs – AUX1 and AUX2 for blowers/accessories
• ✅ Dedicated Settings Button – Direct access to system configuration
• ✅ Mode Selection – Quick access to operating modes
• ✅ LED Screen Display – Temperature and status information
• ✅ Temperature Control – Up/Down buttons for precise adjustment
• ✅ 3 Metre Cable – Generous cable length for flexible installation
• ✅ IN.Y & IN.X Compatible – Designed for premium Gecko systems
• ✅ IN.LINK Connection – Gecko’s proprietary plug-and-play system
• ✅ 12V Operation – Safe low voltage design

⚙️ Technical Specifications

Specification	Value
Manufacturer	Gecko Alliance
Model	IN.K800
SKU	TS-AE800
Product Type	Topside Panel (Main)
Number of Buttons	10
Button Functions	Settings, Mode, P1, P2, P3, AUX1, AUX2, Light, Up, Down
Maximum Pumps Controlled	3
Auxiliary Outputs	2 (AUX1, AUX2)
Display Type	LED Screen
Panel Length	222 mm
Panel Height	108 mm
Cable Length	3 m
Operating Voltage	12V
Connection Type	IN.LINK
Compatible Systems	IN.Y and IN.X Systems
Installation Position	Outside edge of hot tub only

🔌 Compatibility Guide

This Topside Panel is Compatible With:

Spa Pack Model	Type	Confirmed
IN.Y	Gecko Spa Pack	✅
IN.Y Series	Gecko Spa Pack	✅
IN.X	Gecko Spa Pack	✅
IN.X Series	Gecko Spa Pack	✅

NOT Compatible With:

• ❌ Gecko IN.XM or IN.XE (use IN.K450 or IN.K600)
• ❌ Gecko Class Series
• ❌ Balboa systems (BP, GS, GL Series)
• ❌ Other manufacturer spa packs

Connection Requirements:

• Spa pack must be IN.Y or IN.X series
• Spa pack must have IN.LINK topside port available
• 12V power supply from spa pack
• Installation position on outside edge of hot tub

📍 How to Verify Compatibility:

• Confirm your spa pack is IN.Y or IN.X series
• Locate the IN.LINK topside port on your Gecko spa pack
• Check existing topside model if replacing
• Ensure installation location is on outside edge

⚠️ Important: The IN.K800 uses Gecko’s proprietary IN.LINK connection. This panel will NOT work with Balboa or other manufacturer systems.

⚠️ Critical Installation Requirement

This touchpad MUST be installed on the OUTSIDE edge of the hot tub.

Requirement	Detail
Installation Position	Outside edge only
Not Suitable For	Internal or recessed mounting
Cable Length	3 metres provided
Reason	Panel design and sealing requirements

This is a manufacturer requirement – installing the IN.K800 in any other position may affect operation or void warranty. Ensure your spa has a suitable outside edge mounting location before purchasing.

🔘 Button Functions & LED Display

Ten-Button Operation:

Button	Function	Action
SETTINGS	System Configuration	Access spa settings and configuration
MODE	Operating Mode	Select operating mode (economy, standard, etc.)
P1	Pump 1 Control	Activate/cycle Pump 1 speeds
P2	Pump 2 Control	Activate/cycle Pump 2 speeds
P3	Pump 3 Control	Activate/cycle Pump 3 speeds
AUX1	Auxiliary 1	Control auxiliary device 1 (blower/ozone/etc.)
AUX2	Auxiliary 2	Control auxiliary device 2 (blower/ozone/etc.)
LIGHT	Lighting Control	Activate/cycle spa lighting
UP (▲)	Temperature Up	Increase set temperature
DOWN (▼)	Temperature Down	Decrease set temperature

LED Display Features:

Display Element	Shows
Temperature	Current water temperature
Set Point	Desired temperature when adjusting
Mode Indicator	Current operating mode
Status Icons	Heating, filtering, pump/aux indicators
Error Codes	System diagnostic messages
Settings Menu	Configuration options when in settings

Operating Notes:

• Press Settings to access system configuration menu
• Press Mode to cycle through available operating modes
• Press P1, P2, or P3 to activate respective pump zones
• Press again to cycle pump speeds or turn off
• Press AUX1 or AUX2 to control auxiliary equipment
• Press Light to activate lighting or cycle colours/modes
• Press Up/Down to adjust desired water temperature
• All three pumps and both auxiliary outputs can operate simultaneously

🔧 Dual Auxiliary Control

AUX1 and AUX2 – What Can They Control?

The dual auxiliary buttons provide control for additional spa equipment:

Auxiliary Use	Common Equipment
AUX1	Air blower, ozonator, water feature
AUX2	Second blower, circulation pump, aromatherapy

Typical Configurations:

• AUX1 = Air Blower for bubbling massage
• AUX2 = Ozonator or secondary feature
• Or custom configurations based on spa design

The exact function of AUX1 and AUX2 depends on how your spa is configured. Refer to your spa pack documentation or the technical manual.

Benefits of Dual Auxiliary:

• Control blowers independently from pumps
• Manage ozone/UV sanitation systems
• Operate water features or fountains
• Complete control of all spa accessories

🔄 Gecko Main Topside Comparison

How IN.K800 Compares:

Feature	IN.K500	IN.K600 Static	IN.K800	IN.K1000
Buttons	7	11	10	Touch
Max Pumps	2	3	3	Full
Auxiliary	0	0	2	Full
Settings/Mode	✅/✅	Varies	✅/✅	✅/✅
Cable Length	3m	–	3m	3m
Size (mm)	182 × 85	220 × 107	222 × 108	190 × 130
Compatible	IN.Y	IN.XM/XE/Y	IN.Y/X	Y/X Series
Edge Mount	✅	❌	✅	–

Choose IN.K800 When:

• Your spa has IN.Y or IN.X series system
• You need control of 3 pumps plus auxiliary equipment
• You want dedicated Settings and Mode buttons
• Your spa has blowers or other accessories needing control
• You have an outside edge mounting location

💡 Three Pumps + Dual Auxiliary Advantage

Why Full Equipment Control?

Scenario	Benefit
Complete hydrotherapy	All 3 pump zones for full massage
Customised massage	Mix pump and blower combinations
Equipment management	Control all accessories from one panel
Energy efficiency	Activate only what you need
Guest convenience	Intuitive control of all features

Usage Combinations:

• P1 only for gentle foot massage
• P1 + P2 for upper and lower body
• All three pumps for full hydrotherapy
• Add AUX1 (blower) for bubbling ambience
• AUX2 for ozone boost or water feature
• Light for complete spa experience

🎛️ Purpose & Application

What is the IN.K800?

The IN.K800 is a premium main topside control panel providing:

• System settings access
• Operating mode selection
• Three-pump zone control
• Dual auxiliary device control
• Temperature monitoring and adjustment
• Lighting control
• System status and error display

Premium Spa Applications:

The IN.K800 is designed for feature-rich spas with IN.Y and IN.X systems requiring:

• Multiple pump zones for comprehensive hydrotherapy
• Auxiliary equipment control (blowers, ozone, features)
• Advanced configuration and mode options
• Large, clear control interface

🛠️ Installation Guide

Before Installation:

• ⚠️ Disconnect power to spa at the isolator/breaker before any work
• ⚠️ Verify your spa pack is IN.Y or IN.X series
• ⚠️ Confirm outside edge mounting location is available
• ⚠️ Download and use the drilling template
• ⚠️ Check 3m cable length is sufficient for your installation
• ⚠️ Review the technical manual before starting

Installation Steps:

1. Turn off power at the isolator/breaker
2. Identify outside edge mounting location (MANDATORY)
3. Use the drilling template to mark cutout position
4. Prepare cutout for 222 mm × 108 mm panel
5. Remove existing topside panel if replacing
6. Route 3m cable from installation point to spa pack
7. Connect the IN.LINK connector to the spa pack’s topside port
8. Mount the IN.K800 panel on outside edge
9. Ensure watertight seal around panel
10. Restore power and test all ten buttons

Mounting Information:

Specification	Detail
Panel Size	222 mm × 108 mm
Cable Length	3 m
Connection	IN.LINK
Position	Outside edge ONLY
Drilling Template	Available for download
Technical Manual	Available for download

⚠️ Professional installation recommended for proper mounting, watertight sealing, and electrical safety. The large panel size requires careful cutout preparation.

🔗 Wiring & Connection

Connector Information:

Specification	Detail
Connector Type	IN.LINK
Cable Length	3 m
Operating Voltage	12V

Connection Location:

The IN.K800 connects to the IN.LINK topside port on Gecko IN.Y and IN.X series spa packs. As a main topside panel, it connects to the primary topside port.

⚠️ Never force the connector. The IN.LINK plug should connect smoothly. If it doesn’t fit, verify you’re connecting to the correct port on a compatible IN.Y or IN.X system.

🔍 Troubleshooting

Common Issues:

Problem	Possible Cause	Solution
LED screen blank	No power or loose connection	Check power and reseat IN.LINK connector
Settings not accessible	System locked	Check spa pack settings
Mode not changing	Mode locked or unavailable	Refer to technical manual
P1/P2/P3 not responding	Pump fault or configuration	Check pump and spa pack settings
AUX1/AUX2 not working	Auxiliary not installed/configured	Check auxiliary equipment and configuration
Incorrect temperature	Sensor issue	Check temperature sensor connection
Light not working	Bulb/LED faulty	Check light unit
Error codes displayed	Various system issues	Refer to technical manual for meanings

Error Code Display:

The IN.K800 LED screen displays error codes from the spa pack. Refer to the downloadable technical manual (ink800_techbook_en.pdf) for specific error code meanings and solutions.

🔩 Maintenance & Care

Routine Care:

Task	Frequency
Wipe with soft damp cloth	Weekly
Check all ten button responses	Monthly
Check LED display clarity	Monthly
Inspect watertight seal	Annually
Check cable condition	Annually

DO NOT:

• ❌ Use abrasive cleaners
• ❌ Use solvent-based cleaners
• ❌ Submerge the panel
• ❌ Press buttons with sharp objects
• ❌ Force button operation
• ❌ Install anywhere other than outside edge

♨️ Ideal Applications

Application	Suitability
♨️ Gecko IN.Y series spa systems	✅ Ideal
♨️ Gecko IN.X series spa systems	✅ Ideal
♨️ Multi-pump spas (2-3 pumps)	✅ Ideal
♨️ Spas with blowers/auxiliary equipment	✅ Ideal
♨️ Outside edge mounting locations	✅ Required
🔄 Replacement for faulty IN.K800	✅ Direct replacement
❌ Recessed or internal mounting	❌ Not suitable
❌ IN.XM or IN.XE systems	❌ Use IN.K450/K600
❌ Balboa systems	❌ Use Balboa topside

Common Installation Scenarios:

• 🛁 Premium Gecko IN.Y/X series spa builds
• 💆 Feature-rich spas with multiple accessories
• ♨️ Spas with blowers requiring dedicated control
• 🔄 Replacing damaged or faulty IN.K800

❓ Frequently Asked Questions

Q: Why must this be installed on the outside edge?

A: The IN.K800 is designed specifically for outside edge mounting. This is a manufacturer requirement related to the panel’s design, sealing, and operational characteristics. Installing elsewhere may affect performance or void warranty.

Q: What is the difference between IN.K800 and IN.K600?

A: The IN.K800 has 10 buttons with AUX1 and AUX2 for auxiliary equipment, 3m cable, and is for IN.Y/X systems with outside edge mounting. The IN.K600 has 11 buttons, is for IN.XM/XE/Y systems, and doesn’t require outside edge mounting. Button layouts and compatible systems differ.

Q: What do AUX1 and AUX2 control?

A: AUX1 and AUX2 control auxiliary equipment connected to your spa pack, typically air blowers, ozonators, water features, or other accessories. The exact function depends on how your spa is configured.

Q: Is the 3m cable long enough?

A: The 3m cable should suit most outside edge installations. Measure from your mounting location to the spa pack before ordering.

Q: Is my spa compatible?

A: The IN.K800 is compatible with Gecko IN.Y and IN.X series spa packs. Check your spa pack label to confirm.

Q: What size is the panel?

A: The IN.K800 measures 222 mm × 108 mm – one of the largest in the Gecko range.

Q: Is documentation available?

A: Yes, a drilling template and full technical manual are available for download.

Q: Will this work with my Balboa spa?

A: No. The IN.K800 is a Gecko product and only works with Gecko IN.Y and IN.X systems. For Balboa spas, you need a Balboa topside panel.

Q: My spa only has 2 pumps – can I still use this?

A: Yes, the IN.K800 can control 1, 2, or 3 pumps plus auxiliary equipment. Unused buttons simply won’t activate anything if the corresponding equipment is not installed.

📄 Downloads & Resources

• Tech-book
• Flyer
• QRC

🏆 Why Choose the Gecko IN.K800 (TS-AE800)

• ✅ Ten-Button Control – Comprehensive spa management
• ✅ Three-Pump Capability – P1, P2, P3 for full hydrotherapy
• ✅ Dual Auxiliary Control – AUX1 and AUX2 for blowers/accessories
• ✅ Dedicated Settings Button – Direct configuration access
• ✅ Mode Button – Quick operating mode selection
• ✅ LED Screen Display – Temperature and comprehensive status
• ✅ 3 Metre Cable – Flexible installation options
• ✅ IN.Y & IN.X Compatible – Premium Gecko systems
• ✅ IN.LINK Connection – Proprietary plug-and-play
• ✅ Full Documentation – Technical manual and drilling template
• ✅ Genuine Gecko Quality – Manufactured to Gecko Alliance standards

🇬🇧 Why Buy from Parts4Tubs

• ✅ UK-based company with local support
• ✅ Fast UK delivery
• ✅ Expert advice from spa specialists
• ✅ Both Gecko and Balboa products available
• ✅ Compatibility assistance for all spa brands
• ✅ Full warranty support
• ✅ Easy returns within 30 days

✨ Summary

The Gecko IN.K800 Topside Panel (TS-AE800) is a premium ten-button main topside control panel designed for Gecko IN.Y and IN.X series spa systems. Features dedicated Settings and Mode buttons, three pump controls (P1, P2, P3), dual auxiliary outputs (AUX1, AUX2), lighting, and Up/Down temperature control with LED screen display. Measures 222 mm × 108 mm with 3 metre cable and connects via Gecko’s proprietary IN.LINK system at 12V. Important: Must be installed on the outside edge of the hot tub. Compatible with IN.Y and IN.X systems ONLY – NOT for Balboa or other systems. Drilling template and technical manual available for download. Order from Parts4Tubs for fast UK delivery and expert compatibility advice.