Gecko IN.Touch 3+ WiFi Interface Module
Remote SPA Control & Water Monitoring Hub for Gecko Control Systems
Introduction
The Gecko IN.Touch 3+ is an advanced connectivity module that provides full remote control of your spa and integrates with the Gecko Waterlab system for continuous water quality monitoring. Compatible with Gecko control packs IN.YJ, IN.YE, and IN.YT (Versions V2 and V3 only), this module transforms your smartphone into a complete spa controller via the Gecko mobile app.
Key Features
-
Remote Spa Management
Control pumps, heater temperature, lighting, filtration cycles, and more through the Gecko app. -
Water Monitoring Integration
Fully supports pH, ORP, and temperature measurement when paired with the Gecko Waterlab probe and chamber. -
Over-the-Air Firmware Updates
Firmware is delivered remotely, keeping your module up-to-date with the latest features and compatibility. -
Extended RF Connectivity
Utilizes Gecko’s custom RF link between modules, offering stronger range and reliability than Wi-Fi alone. -
Intuitive Gecko App Experience
Receive push notifications for filter reminders, water care guidance, and system alerts even when the app is closed.
Kit Contents
-
CO Module (Spa Unit) – Connects directly to the spa control system (approx. 136 × 99 × 43 mm)
-
EN Module (Home Router Unit) – Connects to your Internet router via Ethernet (approx. 82 × 70 × 24 mm)
-
Accessories: ~2 m spa cable, ~0.9 m Ethernet cable, wall-mount power adapter with ~0.9 m cord
Technical Specifications
Feature | Details |
---|---|
Compatible Control Packs | IN.YJ V2/V3, IN.YE V2/V3, IN.YT V2 (not compatible with V1, XM, XE) |
Waterlab Integration | Supported by IN.Touch 3+ only (not IN.Touch 3) |
Storage & Firmware | OTA updates via Gecko app |
Communication Protocol | RF between CO and EN modules; Wi-Fi for network connectivity |
Push Notification Support | Yes |
CO Module Dimensions | 136 × 99 × 43 mm (5.31″ × 3.9″ × 1.6″) |
EN Module Dimensions | 82 × 70 × 24 mm (3.24″ × 2.76″ × 0.96″) |
Installation & Compatibility Notes
-
Install the CO Module under the spa skirt, at least 30 cm away from metal surfaces to ensure optimal RF reception.
-
The EN Module connects to the home router via Ethernet cable.
-
For water monitoring features, you must have a Gecko Waterlab Chamber (CB-AE063) and Probe (CB-AE064) installed.
-
Not compatible with Gecko S-Class, M-Class, X-Class, IN.XM, or IN.XE control packs.
-
Only supports Y-series spa packs from V2 or V3 onward
Summary
The Gecko IN.Touch 3+ WiFi Interface Module (CB‑AE062) elevates your spa experience by providing full remote control capabilities and automated water quality monitoring when used with the Gecko Waterlab system. Its advanced RF connectivity, ease of installation, over-the-air updates, and smart alerts make it a top-tier solution for modern spa setups.