📶 Gecko IN.Touch 3 WiFi Interface Module – Remote Spa Control from Your Smartphone

Control your hot tub from anywhere using your smartphone – compatible with Gecko Y Series V2 and V3 spa packs

💧 Product Overview

The Gecko IN.Touch 3 WiFi Interface Module (CB-AE061) brings smart home connectivity to your hot tub, allowing you to control your spa remotely from your smartphone, tablet, or computer. This advanced WiFi module connects to your home wireless network and provides full remote control of your Gecko-equipped spa from anywhere with an internet connection.

The IN.Touch 3 is the ideal replacement for the discontinued in.touch 2 (CB-AE060), offering improved connectivity and reliability. The complete kit includes two communication transmitters – one for the spa and one for your home network – plus all necessary cables and power adaptor for a straightforward installation.

Compatible with Gecko Y Series spa packs including IN.YJ, IN.YE, and IN.YT systems (V2 and V3 versions only), the IN.Touch 3 provides convenient features such as temperature adjustment, pump control, and system monitoring without leaving your sofa. Perfect for pre-heating your spa before you get home or checking the status while away.

Important: The IN.Touch 3 is NOT compatible with Gecko Waterlab water monitoring. If you require Waterlab integration, you will need the Gecko IN.Touch 3+ instead.

⭐ Key Features

• ✅ Remote Spa Control – Operate your hot tub from smartphone, tablet, or computer
• ✅ Home WiFi Connection – Connects to your existing wireless network
• ✅ Two Transmitter System – Spa transmitter and home transmitter included
• ✅ Y Series Compatible – Works with IN.YJ, IN.YE, IN.YT (V2 and V3 only)
• ✅ Temperature Control – Adjust water temperature remotely
• ✅ Pump Control – Turn pumps on/off from your device
• ✅ System Monitoring – Check spa status from anywhere
• ✅ Replaces IN.Touch 2 – Direct replacement for discontinued CB-AE060
• ✅ Complete Kit – Everything needed for installation included
• ✅ Compact Design – Small footprint for easy installation
• ✅ 2m Spa Cable – Generous cable length for flexible positioning

🔧 Technical Specifications

Specification	Value
Manufacturer	Gecko
Model	IN.Touch 3
SKU	CB-AE061
Product Type	WiFi Interface Module
Length	70 mm
Height	82 mm
Spa Transmitter Cable	2 m
Ethernet Cable	0.9 m
Power Adaptor Wire	0.9 m
Replaces	CB-AE060 (IN.Touch 2)
Waterlab Compatible	❌ No (requires IN.Touch 3+)

🔗 Compatibility Guide

✅ Compatible Spa Packs

Spa Pack	Version	Compatible
IN.YJ	V2	✅ Yes
IN.YJ	V3	✅ Yes
IN.YE	V2	✅ Yes
IN.YE	V3	✅ Yes
IN.YT	V2	✅ Yes

❌ NOT Compatible With

Spa Pack / Version	Status
IN.YJ V1	❌ NOT Compatible
IN.YE V1	❌ NOT Compatible
IN.YT V1	❌ NOT Compatible
IN.XM	❌ NOT Compatible
IN.XE	❌ NOT Compatible
Gecko Waterlab	❌ NOT Compatible (requires IN.Touch 3+)

⚠️ Critical: The IN.Touch 3 is NOT compatible with V1 versions of Y Series spa packs or with IN.XM and IN.XE control boxes.

🔍 How to Identify Your Spa Pack Version

Before purchasing, verify your spa pack version using these guidelines:

✅ V2 or V3 Spa Pack (Compatible)

Identifier	Description
Label	Product description label clearly shows “V2” or “V3”
ID Number	Has 13 digits
Example	0610-221046-355

❌ V1 Spa Pack (NOT Compatible)

Identifier	Description
Label	Product description label does NOT mention “V2” or “V3”
ID Number	Has 10 digits
Example	0610-221020

Where to Find: The product description label and ID number are located on your spa pack (control box). Check the label carefully before ordering.

📦 What’s Included in the Kit

Item	Description
Spa Transmitter	IN.Touch 3 spa transmitter with 2 m cable
Home Transmitter	IN.Touch 3 home transmitter
Ethernet Cable	0.9 m network cable
Power Adaptor	Wall mount power adaptor with 0.9 m wire

Everything you need for installation is included!

📱 App Features & Remote Control

The IN.Touch 3 enables comprehensive remote control of your spa:

Feature	Description
Temperature Adjustment	Set and monitor water temperature
Pump Control	Turn jet pumps on and off
Heating Control	Start or stop heating cycle
Status Monitoring	View current spa status
Error Alerts	Receive notifications of issues
Scheduling	Set heating schedules (app dependent)

Compatible Devices:

• iOS smartphones and tablets
• Android smartphones and tablets
• Web browsers on computers

🛠️ Installation Guide

Before Installation:

• ⚠️ Verify spa pack compatibility (Y Series V2 or V3 only)
• ⚠️ Ensure stable home WiFi network available
• ⚠️ Check WiFi signal strength at spa location
• ⚠️ Note your WiFi network name and password

Installation Steps:

1. Position Home Transmitter – Place near your WiFi router
2. Connect Ethernet – Link home transmitter to router using included ethernet cable
3. Power Home Transmitter – Connect wall mount power adaptor
4. Install Spa Transmitter – Position near spa pack
5. Connect Spa Transmitter – Connect 2m cable to spa pack communication port
6. Download App – Install Gecko spa control app on your device
7. Configure WiFi – Follow app instructions to connect to your network
8. Test Connection – Verify remote control functions

Network Requirements:

Requirement	Specification
WiFi Network	2.4 GHz recommended
Internet	Broadband connection required
Router	Must allow device connections
Signal Strength	Good signal at spa and router locations

🔌 Connection Information

Spa Transmitter:

• Connects to communication port on spa pack
• 2 m cable length for flexible positioning
• Compact design fits in equipment bay

Home Transmitter:

• Connects to home router via ethernet
• Requires mains power (adaptor included)
• Can be positioned near router for best connection

Communication: The two transmitters communicate wirelessly with each other, creating a bridge between your spa pack and home WiFi network.

🔍 Troubleshooting

Common Issues:

Problem	Possible Cause	Solution
No connection	WiFi configuration	Check network settings in app
Intermittent connection	Weak signal	Reposition transmitters
App not finding spa	Transmitters not paired	Re-run setup process
Cannot control spa	Spa pack incompatible	Verify V2/V3 compatibility
Home transmitter offline	Power or network issue	Check power and ethernet

Connection Tips:

• Ensure both transmitters have clear line of sight if possible
• 2.4 GHz WiFi networks typically have better range than 5 GHz
• Position home transmitter away from interference sources
• Check router allows new device connections

🔄 Comparison: IN.Touch 3 vs IN.Touch 3+

Feature	IN.Touch 3	IN.Touch 3+
Remote spa control	✅ Yes	✅ Yes
Y Series V2/V3 compatible	✅ Yes	✅ Yes
Gecko Waterlab compatible	❌ No	✅ Yes
Water quality monitoring	❌ No	✅ Yes

Choose IN.Touch 3: If you only need remote spa control

Choose IN.Touch 3+: If you also want Gecko Waterlab water quality monitoring integration

♨️ Ideal Applications

Application	Suitability
📱 Remote temperature control	✅ Ideal
📱 Pre-heat spa before arriving home	✅ Ideal
📱 Monitor spa while on holiday	✅ Ideal
📱 Control pumps remotely	✅ Ideal
🔬 Waterlab water monitoring	❌ Requires IN.Touch 3+

Common Use Cases:

• 🏠 Arriving Home – Start heating your spa on your commute
• 🌡️ Temperature Check – Monitor water temperature from indoors
• ✈️ Away from Home – Check spa status while travelling
• ⚡ Energy Management – Control heating schedules remotely
• 🔧 Fault Monitoring – Receive alerts if issues occur

❓ Frequently Asked Questions

Q: Is the IN.Touch 3 compatible with my spa?

A: The IN.Touch 3 is compatible with Gecko Y Series spa packs: IN.YJ (V2/V3), IN.YE (V2/V3), and IN.YT (V2). It is NOT compatible with V1 versions, IN.XM, or IN.XE systems.

Q: How do I know if my spa pack is V2 or V3?

A: Check your spa pack label. V2 and V3 versions clearly show “V2” or “V3” on the label and have a 13-digit ID number. V1 packs don’t mention version and have a 10-digit ID number.

Q: What does the kit include?

A: The complete kit includes: spa transmitter with 2m cable, home transmitter, 0.9m ethernet cable, and wall mount power adaptor with 0.9m wire.

Q: Do I need the IN.Touch 3 or IN.Touch 3+?

A: If you only need remote spa control, the IN.Touch 3 is sufficient. If you want Gecko Waterlab water quality monitoring integration, you need the IN.Touch 3+.

Q: Does this replace the IN.Touch 2?

A: Yes, the IN.Touch 3 (CB-AE061) is the direct replacement for the discontinued IN.Touch 2 (CB-AE060).

Q: What WiFi do I need?

A: You need a standard home WiFi network (2.4 GHz recommended) with broadband internet connection.

Q: Can I control my spa from anywhere?

A: Yes, once connected to your home WiFi and internet, you can control your spa from anywhere with an internet connection.

Q: Is the IN.Touch 3 compatible with IN.XM or IN.XE?

A: No, the IN.Touch 3 is NOT compatible with IN.XM or IN.XE control boxes.

Q: What app do I need?

A: Download the Gecko spa control app from your device’s app store. Follow the in-app instructions for setup.

🏆 Why Choose the Gecko IN.Touch 3 (CB-AE061)

• ✅ Remote Spa Control – Full control from your smartphone
• ✅ Complete Kit – Everything included for installation
• ✅ Y Series Compatible – Works with IN.YJ, IN.YE, IN.YT (V2/V3)
• ✅ Replaces IN.Touch 2 – Direct upgrade from discontinued model
• ✅ Two Transmitter System – Reliable spa-to-home communication
• ✅ 2m Spa Cable – Flexible positioning options
• ✅ Compact Design – 70 × 82 mm footprint
• ✅ Home WiFi Integration – Uses your existing network
• ✅ Genuine Gecko Product – Industry-leading quality
• ✅ Pre-Heat Your Spa – Have it ready when you arrive home

🇬🇧 Why Buy from Parts4Tubs

• ✅ UK-based company with local support
• ✅ Fast UK delivery
• ✅ Expert advice from spa specialists
• ✅ Compatibility assistance available
• ✅ Full warranty support
• ✅ Easy returns within 30 days

✨ Summary

The Gecko IN.Touch 3 WiFi Interface Module (CB-AE061) provides remote smartphone control for your hot tub, connecting to your home WiFi network for convenient spa management from anywhere. Compatible with Gecko Y Series spa packs including IN.YJ, IN.YE, and IN.YT in V2 and V3 versions only (NOT V1, NOT IN.XM/XE). Complete kit includes two communication transmitters (spa unit with 2m cable and home unit), 0.9m ethernet cable, and wall mount power adaptor. Compact 70 × 82 mm design. Direct replacement for discontinued IN.Touch 2 (CB-AE060). Note: NOT compatible with Gecko Waterlab – requires IN.Touch 3+ for water quality monitoring. Verify your spa pack version before ordering: V2/V3 packs have version shown on label and 13-digit ID number. Order from Parts4Tubs for fast UK delivery and expert compatibility advice.