Certikin Euroswim EUP301 💧 3HP (2.2kW) Single Phase Commercial Pool Pump | 2″ Ports | Professional Grade Performance

Transform your commercial pool or spa operation with DAB’s engineering excellence – delivering exceptional circulation, whisper-quiet operation, and long-term reliability for demanding aquatic facilities.

📋 Product Overview

The Certikin Euroswim EUP301 represents the pinnacle of single-phase pool pump engineering, manufactured by DAB Pumps – a company with over 35 years of expertise in professional water circulation systems. This 3HP (2.2kW) powerhouse combines commercial-grade construction with intelligent design features that significantly reduce maintenance demands while delivering the robust performance that large pools, swim spas, and multi-feature aquatic installations require.

Engineered for facilities that cannot compromise on reliability, the EUP301 features a substantial 5-litre pre-filter basket – the largest in its class – reducing cleaning frequency by up to 60% compared to standard pumps. The transparent polycarbonate strainer cover provides instant visual confirmation of basket condition without disassembly, whilst stainless steel-reinforced 2″ ports ensure decades of leak-free service even under continuous operation.

This self-priming centrifugal pump excels in both retrofit and new installation applications, handling liquid temperatures up to 60°C and operating flawlessly in ambient conditions reaching 50°C. Whether you’re managing a municipal leisure facility, hotel pool complex, or high-end residential spa installation, the EUP301 delivers the professional-grade performance your operation demands with operating costs that preserve your bottom line.

⭐ Key Features

✅ Genuine 3HP (2.2kW) Motor Power – Provides the substantial circulation capacity needed for large pools (6+ person hot tubs, swim spas up to 15m, or commercial pools up to 60m³), multiple high-powered jets, water features, and rapid heating applications. This motor delivers 15-25% more effective flow than under-specified alternatives that claim similar ratings.

✅ Industry-Leading 5-Litre Pre-Filter Basket – Captures significantly more debris before requiring attention, reducing maintenance interventions by up to 60% compared to standard 2-3 litre baskets. Fewer cleanings mean lower labor costs and reduced system downtime for commercial operations.

✅ Crystal-Clear Polycarbonate Strainer Cover – Allows instant visual inspection of pre-filter status without system shutdown or disassembly. Maintenance teams can assess basket fullness during routine rounds, optimising cleaning schedules and preventing flow restriction issues before they impact water quality.

✅ Remarkably Quiet Operation (53-64 LpA) – Despite its substantial power, the EUP301 maintains noise levels comparable to a quiet conversation. Essential for hotels, residential installations, and leisure facilities where guest comfort cannot be compromised. Advanced motor design minimises vibration transmission that typically creates acoustic disturbances.

✅ Commercial-Grade Stainless Steel Port Reinforcement – Both 2″ suction and discharge connections feature integrated stainless steel reinforcement rings that prevent thread degradation, eliminate plastic fatigue cracking, and ensure leak-free performance throughout the pump’s operational lifetime – typically 12-15 years in properly maintained installations.

✅ High-Temperature Capability – Designed to handle liquid temperatures up to 60°C and operate in ambient temperatures reaching 50°C, making it ideal for spa applications, heated pool installations, and plant rooms with limited ventilation. This thermal resilience prevents the premature motor failures common in pumps rated only to 40-45°C.

✅ Self-Priming Design – Eliminates the complexity and cost of auxiliary priming systems. The pump can reliably lift water from up to 2 metres below the installation point, providing installation flexibility whilst ensuring rapid prime recovery after maintenance procedures or seasonal startups.

✅ Salt Chlorination System Compatible – Fully compatible with modern salt chlorinator systems that are increasingly favoured for their lower chemical costs and improved water quality. The materials and seals resist the mildly corrosive environment that causes premature failure in pumps not specifically designed for salt water applications.

✅ Single-Phase 220V Operation – Runs on standard UK single-phase power supplies, eliminating the need for costly three-phase installations whilst still delivering commercial-grade performance. Built-in thermal overload protection prevents damage from temporary power fluctuations or debris-induced mechanical resistance.

✅ Professional DAB Engineering – Manufactured by DAB Pumps, an internationally recognised pump specialist with 35+ years developing circulation solutions for demanding commercial applications. Every component meets rigorous quality standards that consumer-grade pool equipment simply cannot match.

🔧 Technical Specifications

Specification	Details
Model	Euroswim EUP301
Motor Power	3HP (2.2kW)
Phase	Single Phase
Voltage	220V
Port Size	2″ suction & 2″ discharge (G2″ threaded)
Pre-Filter Capacity	5 litres
Maximum Flow Rate	39.8 m³/h @ 6m head
Flow at 10m Head	36.7 m³/h
Flow at 14m Head	33.5 m³/h
Maximum Head	18m
Noise Level	53-64 LpA
Motor Protection	Built-in thermal overload protection
Maximum Liquid Temperature	60°C
Maximum Ambient Temperature	50°C
Salt Chlorination Compatible	Yes
Strainer Cover Material	Clear polycarbonate
Port Reinforcement	Stainless steel rings
Installation Type	Above or below water level
Priming	Self-priming (up to 2m suction lift)
Overall Dimensions (A)	648mm
Body Width (B)	311mm
Height (H)	353mm
Motor Diameter (C)	290mm
Weight	Approximately 32kg
Manufacturer	DAB Pumps (Certikin branded)
Warranty	2 years manufacturer warranty

💰 Usage Costs & Running Expenses

📊 Annual Running Cost Calculation

Understanding the true operating costs of commercial pool equipment is essential for accurate budgeting and equipment selection decisions. The EUP301’s energy consumption should be evaluated against your facility’s specific usage pattern:

Power Consumption: 2.2kW (motor rating)

Current UK Commercial Electricity Rates: Approximately £0.26-0.29 per kWh for commercial users (Q4 2024 – 2025 average)

For these calculations, we’ll use £0.27 per kWh as a realistic mid-range commercial rate:

🏊 Scenario 1: Seasonal Outdoor Pool Operation

Usage Pattern: 8 hours/day for 6 months (April-September)

• Annual operating hours: 8 × 183 days = 1,464 hours
• Annual energy consumption: 2.2kW × 1,464 hours = 3,220.8 kWh
• ✅ Annual electricity cost: 3,220.8 × £0.27 = £869.62

🛁 Scenario 2: Indoor Heated Pool/Spa (Year-Round, Moderate Use)

Usage Pattern: 6 hours/day, 365 days/year

• Annual operating hours: 6 × 365 = 2,190 hours
• Annual energy consumption: 2.2kW × 2,190 hours = 4,818 kWh
• ✅ Annual electricity cost: 4,818 × £0.27 = £1,300.86

🏢 Scenario 3: Commercial Leisure Facility (High-Intensity Operation)

Usage Pattern: 12 hours/day, 365 days/year

• Annual operating hours: 12 × 365 = 4,380 hours
• Annual energy consumption: 2.2kW × 4,380 hours = 9,636 kWh
• ✅ Annual electricity cost: 9,636 × £0.27 = £2,601.72

💡 Energy Efficiency Considerations

Variable Speed Comparison:

While the EUP301 is a single-speed pump optimised for continuous high-performance operation, facilities with variable demand patterns should note that running the pump at partial capacity (through valve throttling) does not significantly reduce energy consumption. For installations where demand varies substantially throughout the day, a variable-speed pump might offer 20-40% energy savings, though at a significant capital cost premium (typically £800-1,200 additional investment).

Three-Phase Alternative Savings:

The three-phase version (EUP303) features an IE2 high-efficiency motor that typically provides 8-12% energy savings compared to single-phase equivalents. For the high-intensity commercial scenario above, this could represent annual savings of approximately £208-£312, potentially justifying the three-phase installation costs for facilities with existing three-phase infrastructure.

🎯 Real World Applications

🏊‍♂ Large Residential Swimming Pools

Perfect for substantial domestic pools (40-60m³ capacity) requiring powerful circulation for effective filtration and heating. The 5-litre pre-filter manages the increased debris load from heavy family use whilst the self-priming design handles installations where the pump must be positioned above water level in a plant room or garage.

Typical Performance: Achieves complete pool turnover every 6-8 hours at 10m total head, meeting residential water quality standards whilst maintaining whisper-quiet operation that won’t disturb indoor living spaces or outdoor entertaining areas.

🛁 Commercial Swim Spas & Exercise Pools

Delivers the substantial flow rates required for powerful resistance jets whilst simultaneously managing filtration duties. The 2.2kW motor provides sufficient pressure for 6-8 adjustable therapy jets plus a swimming current generator, creating the professional spa experience that justifies premium pricing.

Commercial Advantage: The oversized pre-filter manages the increased debris load from continuous use without requiring mid-session maintenance interventions. The 60°C temperature rating ensures reliable operation even when heating systems maintain elevated water temperatures for therapeutic benefits.

🌊 Hotel & Leisure Centre Pool Installations

Engineered for the demanding duty cycles of commercial hospitality operations where reliability directly impacts guest satisfaction and revenue. The thermal overload protection and high-temperature capability ensure continuous operation throughout peak seasons whilst the quiet operation prevents guest complaints in adjacent accommodation.

Maintenance Efficiency: The transparent strainer cover allows housekeeping staff to perform visual inspections during routine rounds, scheduling basket cleaning during off-peak hours rather than after flow problems have already impacted water clarity. This proactive approach reduces reactive maintenance costs by approximately 35%.

🔄 Retrofit Upgrades from Undersized Pumps

An ideal replacement for aging 1.5HP or 2HP pumps that no longer provide adequate circulation as system components age and hydraulic resistance increases. The increased flow capacity compensates for partially restricted pipework, aging filter media, and scaled heat exchangers without requiring expensive pipe replacement.

Installation Simplicity: The standard 2″ ports match existing plumbing, whilst the compact footprint (648mm length) fits within original pump mounting locations. The self-priming capability eliminates the need to modify installations where pipework rises above the pump centerline.

🏢 Small Commercial Pool Installations

Suitable for boutique hotels, small leisure facilities, care homes, and school pools up to approximately 60m³ where reliable operation is essential but three-phase power may not be available. The single-phase operation eliminates the £2,500-4,500 cost of three-phase supply installation whilst still delivering professional-grade performance and longevity.

Regulatory Compliance: Provides the circulation rates necessary to meet UK pool water treatment advisory standards (typically 4-6 turnovers per day for public pools), ensuring compliance with health and safety requirements whilst minimising chemical consumption through effective filtration.

💡 Cost Savings & Upgrade Analysis

📍 Scenario: Replacing an Aging 2HP Pump with the EUP301

Many facilities operate pumps that are 10+ years old, manufactured when motor efficiency standards were substantially lower than today’s requirements. Let’s examine the financial case for upgrading from a typical older 2HP pump to the EUP301:

Old Pump (Typical 2006-2014 vintage 2HP):

• Rated power: 1.5kW (actual draw often higher due to motor inefficiency)
• Typical actual consumption: 1.75kW (due to aged motor windings and capacitor degradation)
• Inadequate flow due to impeller wear and internal clearance degradation
• Required extended run times to maintain water quality
• ❌ Annual operating hours (extended to compensate): 5,200 hours
• ❌ Annual energy consumption: 1.75kW × 5,200 = 9,100 kWh
• ❌ Annual electricity cost: 9,100 × £0.27 = £2,457

New EUP301:

• Rated power: 2.2kW (modern efficient motor design)
• Superior flow means faster turnover, shorter operating hours required
• ✅ Annual operating hours (optimised schedule): 4,200 hours
• ✅ Annual energy consumption: 2.2kW × 4,200 = 9,240 kWh
• ✅ Annual electricity cost: 9,240 × £0.27 = £2,474.80

Initial Analysis: The direct energy costs appear similar (actually £17.80 higher for the new pump), but this misses the complete picture…

Additional Savings Factors:

1. 💰 Maintenance Cost Reduction:
   • Old pump: Frequent seal replacements (£180/year), bearing failures (£240 every 18 months), motor rewinds (£450 every 3 years) = £403/year average
   • New pump: Warranty coverage for 2 years, modern sealed bearings, improved seals = £75/year average
   • Annual saving: £328
2. 💰 Chemical Cost Reduction:
   • Improved circulation and filtration efficiency reduces chemical demand by approximately 15%
   • Typical facility chemical spend: £1,200/year
   • Annual saving: £180
3. 💰 Water Quality Compliance:
   • Reduced risk of pool closures due to circulation system failures
   • Average closure cost (lost revenue + remediation): £2,500 per incident
   • Estimated annual risk reduction: 75% (from aged pump failure risk of 40% to new pump risk of 10%)
   • Risk-adjusted saving: £750/year

📊 Total Annual Benefit:

• Energy: -£17.80 (slight increase)
• Maintenance: +£328
• Chemicals: +£180
• Risk mitigation: +£750
• 💷 Net annual benefit: £1,240.20

⏱ Payback Period:

If the EUP301 costs approximately £650-750 including installation (typical for equipment upgrade), the payback period is:

£700 ÷ £1,240.20 = 0.56 years (approximately 7 months)

📈 5-Year Total Savings:

£1,240.20 × 5 years = £6,201 in operational savings, plus the capital value of having a reliable pump with 10+ years remaining service life versus an aging unit requiring imminent replacement.

📍 Scenario: Upgrading from 1.5HP to 3HP for Water Feature Addition

Situation: A hotel wants to add decorative water features and upgraded spa jets to their existing pool but the current 1.5HP pump cannot provide adequate flow.

Option 1: Keep Old Pump + Add Booster Pump

• ❌ Original 1.5HP pump: 1.1kW × 4,200 hours = 4,620 kWh = £1,247.40
• ❌ Additional booster pump: 0.75kW × 4,200 hours = 3,150 kWh = £850.50
• ❌ Combined annual cost: £2,097.90
• ❌ Additional maintenance complexity, dual failure points, complicated controls

Option 2: Single EUP301 Replacement

• ✅ EUP301 only: 2.2kW × 4,000 hours = 8,800 kWh = £2,376
• ✅ Single pump to maintain, one failure point, simpler controls
• ✅ Better balanced flow, improved efficiency

Analysis:

While the dual-pump option appears £278 cheaper annually in electricity costs, the operational reality tells a different story:

• Maintenance: Two pumps = double the maintenance requirements = £250+ additional annual costs
• Space: Booster pump requires additional plant room space and plumbing
• Controls: Complex sequencing and bypass systems = £400-600 additional installation costs
• Efficiency: EUP301 can reduce operating hours by 200 annually due to superior flow = £118 saving
• Reliability: Single point of failure is actually advantageous when you have spare pump available

💰 Real-world result: The single EUP301 solution typically costs £350-450 less annually when all factors are considered, plus £600-900 less in installation costs.

📥 Downloads & Resources

All technical documentation for the Certikin Euroswim EUP301 is available for download below. These comprehensive resources provide detailed installation guidance, maintenance procedures, and complete specifications:

📄 Installation & Maintenance Manual – Complete installation instructions, electrical connection diagrams, commissioning procedures, maintenance schedules, and troubleshooting guidance (PDF, 2.8MB)

📄 Euroswim Range Product Brochure – Technical specifications, performance curves, dimensional drawings, and complete range comparison for all Euroswim models from 0.5HP to 3HP (PDF, 1.4MB)

All documentation is provided by DAB Pumps/Certikin and represents the manufacturer’s official installation and operational guidance. Please ensure installers review all documentation prior to commissioning.

🏆 Why Choose This Product

✅ Proven DAB Engineering Excellence – Manufactured by DAB Pumps, a globally respected pump specialist with over 35 years developing professional water circulation solutions. This isn’t rebadged consumer equipment – it’s genuine commercial-grade engineering backed by extensive R&D and rigorous testing protocols.

✅ Substantial Maintenance Time Savings – The 5-litre pre-filter capacity means maintenance teams spend 60% less time on routine basket cleaning compared to standard pumps. For commercial facilities, this translates to approximately 45 minutes saved per week – over 39 hours annually that staff can dedicate to higher-value activities.

✅ Outstanding Cost-Effectiveness – While premium pumps cost £900-1,200+, the EUP301 delivers comparable performance, reliability, and longevity at a significantly more accessible price point. The combination of reasonable capital cost and low operating expenses creates an exceptional total cost of ownership profile.

✅ Installation Flexibility & Simplicity – Self-priming operation eliminates expensive auxiliary priming systems whilst accommodating installations where the pump must be positioned above water level. The standard 2″ ports match existing plumbing infrastructure, and single-phase operation means no costly electrical upgrades for facilities without three-phase power.

✅ Exceptional Reliability Reduces Downtime Risk – Commercial-grade bearings, premium mechanical seals, and stainless steel reinforcement ensure consistent operation season after season. The thermal overload protection prevents damage from temporary operating anomalies, whilst the robust construction tolerates the thermal cycling and chemical exposure that destroys cheaper alternatives.

✅ Quiet Operation Protects Guest Experience – At just 53-64 LpA, the EUP301 operates more quietly than conversational speech. For hotels, residential installations, and leisure facilities, this ensures pump noise never compromises the relaxing atmosphere that guests expect and never generates noise complaints from adjacent properties.

✅ Comprehensive Manufacturer Support – Genuine DAB/Certikin equipment comes with proper technical support, readily available genuine spare parts, and comprehensive documentation. This contrasts sharply with grey-market imports and off-brand equipment where technical support is non-existent and parts availability is uncertain.

✅ Future-Proofed Capacity – The 3HP rating provides substantial headroom for system modifications – adding jets, water features, or increasing circulation rates without requiring pump replacement. This makes the EUP301 an investment that accommodates facility evolution rather than an immediate limitation.

🌟 Why Buy From Parts4Tubs?

✅ Authorised Certikin Dealer – We supply genuine manufacturer-direct equipment with full warranty protection, not grey imports or parallel market products with questionable provenance and no manufacturer support.

✅ Expert Technical Guidance – Our team includes qualified pool engineers who can provide proper equipment sizing, installation advice, and ongoing technical support. We help you select the right solution for your specific application, not just move boxes.

✅ Competitive Pricing on Premium Equipment – We offer professional-grade equipment at prices that make sense for both commercial operators and demanding residential customers. No unnecessary markup, just fair pricing on quality products.

✅ Fast Dispatch & Reliable Delivery – Most orders ship within 24-48 hours via established carriers. We understand that pump failures create urgent operational problems – we respond accordingly.

✅ Complete Product Range – Beyond pumps, we stock comprehensive filtration, sanitation, heating, and control equipment. One supplier for your complete pool and spa equipment requirements means simplified procurement and consistent support.

✅ Real-World Experience – We’re pool people serving pool people. Our recommendations come from decades of hands-on experience with what actually works in UK conditions, not marketing literature and theoretical specifications.

✨ Summary

The Certikin Euroswim EUP301 represents the optimal intersection of professional-grade performance, reasonable capital cost, and exceptional long-term reliability for demanding pool and spa applications. Its 3HP motor delivers the robust circulation that large pools, swim spas, and multi-feature installations require, whilst the oversized 5-litre pre-filter dramatically reduces the maintenance burden that typically consumes significant staff time in commercial operations.

Manufactured by DAB Pumps – a recognised leader in professional circulation equipment – the EUP301 brings genuine commercial engineering to applications where reliability cannot be compromised and operational costs must be controlled. The combination of stainless steel-reinforced ports, transparent monitoring capability, thermal resilience, and whisper-quiet operation creates a pump that seamlessly integrates into sophisticated aquatic facilities whilst providing the dependable service that justifies the investment.

Whether you’re replacing aging equipment that’s costing you thousands in excess energy and maintenance, upgrading to accommodate expanded facilities, or specifying equipment for new construction, the EUP301 delivers the performance, efficiency, and longevity that professional pool and spa operations demand.