Balboa GL2000 Mach 3 Control Box: The Heart of Your Hot Tub Experience

As a dedicated hot tub enthusiast and spare parts supplier, I’m excited to introduce you to the Balboa GL2000 Mach 3 Control Box. This powerhouse of technology is designed to elevate your hot tub experience to new heights. Let me walk you through the features that make this control box a must-have for your spa system.

Unparalleled Versatility

The Balboa GL2000 Mach 3 is a marvel of engineering, offering incredible flexibility for a wide range of hot tub setups. Whether you’re upgrading an existing system or building a new one from scratch, this control box has you covered.

Pump Configuration

• Pump 1: Supports single or dual speed pumps
• Pump 2: Accommodates single or dual speed (when no blower is used)
• Pump 3 or Air Blower: One additional option available (if pump 2 is single speed)
• Circulation Pump: Optional for enhanced water circulation

Additional Features

• Heater: Includes a powerful 3KW heater for rapid water heating
• Ozone: Supports one ozone generator for water purification
• Lighting: Compatible with both 12-volt and 230-volt lighting systems
• Entertainment: Includes a connection point for radio or TV/AV systems

Advanced M7 Technology

The Balboa GL2000 Mach 3 incorporates cutting-edge M7 technology, simplifying your hot tub’s operation and maintenance:

• Eliminates the need for external sensors and flow switches
• Two internal sensors handle all monitoring and control functions
• Streamlined design reduces potential points of failure

Expandability

Future-proof your hot tub with the GL2000 Mach 3’s expansion capabilities:

• Add an expander board to include an extra 1-speed pump or blower
• Support for multiple topside controls and auxiliary buttons

Compatibility

This control box is designed to work seamlessly with:

• Advanced ML range topside controls (e.g., ML700 and ML900)
• Hydrospa Essence systems (PCB SN HSEX2000 54234)
• Ideal for upgrades to existing systems

Easy Installation

The Balboa GL2000 Mach 3 is designed for straightforward installation:

• 2-inch socket heater union sleeves for secure connections
• Amp cables plug directly into the PCB for component operation

Specifications Table

Feature	Specification
Voltage	230VAC
Frequency	50Hz
Heater Power	3KW
Dimensions (with heater)	500mm (L) x 120mm (W) x 300mm (H)
Dimensions (box casing only)	330mm (L) x 120mm (W) x 300mm (H)
Pump Support	Up to 3 pumps (configuration dependent)
Lighting	12V or 230V compatible
Ozone Support	Yes
Entertainment Connection	Yes

Documentation

• Tech Sheet

Quality and Reliability

The Balboa GL2000 Mach 3 Control Box is a testament to Balboa’s commitment to quality and innovation in the hot tub industry. While this is a generic, unlicensed control box, it’s built to the same exacting standards that have made Balboa a trusted name among hot tub enthusiasts.

Installation Note

To ensure optimal performance and safety, I recommend having this control box installed by a qualified professional. Proper installation is crucial for the longevity and reliability of your hot tub system.

Upgrade your hot tub experience today with the Balboa GL2000 Mach 3 Control Box – the smart choice for discerning spa owners who demand the best in performance and versatility.

 

Hot Tub Wiring – Configuring a Balboa BP7 Spa Control 4.0kW Spa Pack

If you are using a basic setup, and by basic I mean a regular dual speed hot tub pump with a single speed blower, out of the box, your Balboa pack is likely to work without any additional configuration. However, if you are not using a separate circulation pump, the chances are you will need to “configure” the pack using the details below.

On the underside of the Spa Pack covers, you will see a circuit diagram that looks something like this.

Firstly, you need to work through the setup table at the bottom on the left hand side and work out which setup number you need. For example, a 2 speed pump and a single speed blower will need setup #12.

Next, you need to change the DIP switch settings to match your setup. Once you have the right combination of DIP switches, using the topside control you should do the following to change the pack’s setup mode to #12.

To go into the low levels follow the following steps please.

1. Turn tub off.
2. DIP switch 1 move to ON.
3. Turn tub on
4. On the top side control, Press “WARM” twice
5. Press “LIGHT”
6. Press “WARM”
7. Then use “WARM” to move down to the low levels until you get on the set up number you need.
8. Turn off tub
9. DIP switch one back to OFF
10. Turn on tub

Getting the right setup and config is important for the pack to function correctly and the buttons on the top side to do what you expect them to.

 

Balboa DIP Switches Explained

Most of the Balboa Spa Packs have a set of DIP switches that can seem a little confusing in the setup. In the most basic form, you are telling the Spa Pack how many pumps or blowers you have connected and how many it should allow to run before it turns off the heater (or let them all run at once). The reason for this is if you are limiting the amount of current the pack can draw. You are also telling the pack wither you need additional cool down times if you are using an gas/propane/ASHP additional heater. This to stop the kettling effect you can get in the heaters.

Check the circuit diagram that is on the inside of your Balboa pack and do not just copy the settings I explain below as they may be in a different order. The “logic” behind them is the same so just check what each of the DIP switches says it does.

Fixed-fuction DIP Switches 

A1 Test Mode (normally Off). 

A2 In “ON” position, add one high-speed pump (or blower) with Heater. (If you have 1 pump and NO blower use this)

A3 In “ON” position, add two high-speed pumps (or 1 HS Pump and Blower) with Heater. (If you have a pump and a blower use this)

A4 In “ON” position, add four high-speed pumps (or 3 HS Pumps and Blower) with Heater. (If you have two or three pumps and a blower use this)

You should only enable one of the A2, A3 or A4. You can use them in combinations, but it is easier just to use one.

A5 In “ON” position, enables Special Amperage Rule B.  In “OFF” position, enables Special Amperage Rule A. 

Special Amperage Rule A No Limitation (if you are not sure, set it to this. Worst case, your electric will trip if you don’t have enough current available)

Special Amperage Rule B 2 High Speed Pump Maximum, in Setups 1 – 9 1 High Speed Pump Maximum, and also Blower turns off with 1 High Speed Pump, in Setups 10 – 18 (avoid this if you can)

A6 Persistent memory reset (Used when the spa is powering up to restore factory settings as determined by software configuration). 

A2, A3, and A4 work in combination to determine the number of high-speed devices and blowers that can run before the heat is disabled. i.e. A2 and A3 in the ON position and A4 in the OFF position will allow the heater to operate with up to 3 high‑speed pumps (or two HS Pumps and Blower) running at the same time. Heat is disabled when the fourth high-speed pump or blower is turned on. 

Note: A2/A3/A4 all off = No heat with any high-speed pump or blower. 

Assignable DIP Switches 

A7 In “ON” position, enables a 5-minute cooldown for some gas heaters (Cooling Time B). In “OFF” position, enables a 1-minute cooldown for electric heaters (Cooling Time A). 

 

Who are Balboa Water Group?

Balboa Water Group is a prominent manufacturer and supplier of innovative spa and hot tub components. With a rich history spanning several decades, Balboa Water Group has established itself as a leading brand in the industry, known for its cutting-edge technology, quality craftsmanship, and exceptional customer service.

Balboa Water Group specializes in designing and manufacturing spa control systems, which serve as the brains behind the operation of hot tubs and spas. These control systems include a control panel, circuit board, and other components that regulate various functions, such as temperature control, water flow, jet activation, and lighting.

One of the key strengths of Balboa Water Group is their dedication to innovation. They continuously strive to develop new and advanced technologies that enhance the spa experience for users. From user-friendly interfaces and touchscreens to wireless connectivity and smartphone apps, Balboa control systems offer convenient and intuitive control over every aspect of the spa.

Balboa Water Group also places a strong emphasis on safety and energy efficiency. Their control systems often feature built-in safety mechanisms, such as high-limit sensors and automatic shutdowns, to protect users from potential hazards. Additionally, they incorporate energy-saving features that optimize power consumption, helping to reduce operating costs and environmental impact.

In addition to control systems, Balboa Water Group offers a comprehensive range of spa components and accessories. These include pumps, heaters, filters, jets, valves, and more. Their products are known for their durability, reliability, and compatibility with various hot tub models and brands.

Customer satisfaction is a top priority for Balboa Water Group. They provide excellent technical support, troubleshooting assistance, and product documentation to help spa owners and industry professionals make the most of their products. Balboa also collaborates closely with spa manufacturers and distributors worldwide, ensuring that their components are widely available and supported.

Balboa Water Group's commitment to quality and innovation has earned them a stellar reputation within the spa industry. Whether you are a hot tub owner, a spa designer, or a service professional, choosing Balboa products can provide you with the confidence and reliability you need to create a superior spa experience.

Overall, Balboa Water Group is a trusted and respected name in the spa industry, known for its technologically advanced spa components, commitment to customer satisfaction, and ongoing pursuit of innovation. Their products and solutions continue to elevate the spa experience for users around the world.