🎛️ Balboa BP6013G3 Spa Control System | 3.0kW | Triple-Pump with M7 Technology

Flexible Spa Control with Sensor-Free M7 Technology — Three Pumps, Dual Power Options & WiFi Ready

⚠️ DISCONTINUED PRODUCT

This control box is no longer offered by Balboa for the aftersales market.

✅ Recommended Replacement: Balboa BP8 (BX-BPBP8)

The BP8 offers improved capability with a dedicated blower output (not shared with Pump 3), higher lighting capacity (2A vs 1A), and the same triple-pump support with M7 technology.

📋 Product Overview

The Balboa BP6013G3 is a WiFi-ready spa control system designed for flexible spa configurations. Featuring an integrated 3.0kW heater with Balboa’s M7 technology, this system eliminates the need for external sensors or flow switches — simplifying installation whilst enhancing reliability.

Supporting up to three pumps (with Pump 3 or blower selectable), a circulation pump, ozone generator, and lighting, the BP6013G3 delivers comprehensive control for mid-to-large hot tub configurations.

Compatible with both Balboa TP Series and SpaTouch topside panels and supporting single-phase and three-phase 230V installations, the BP6013G3 adapts to virtually any spa configuration.

🔄 Replacement Information

Discontinued Model	Current Replacement
BP6013G3 (BX-BP604)	✅ BP8 (BX-BPBP8)

Why Upgrade to BP8?

Feature	BP6013G3	BP8
Pump 3	Shared with Blower	✅ Dedicated output
Blower	Shared with Pump 3	✅ Dedicated output
Light Output	10V @ 1A	✅ 10V @ 2A
M7 Technology	✅ Yes	✅ Yes
3.0kW Heater	✅ Yes	✅ Yes (Incoloy)
WiFi Ready	✅ Yes	✅ Yes
TP/SpaTouch Panels	✅ Yes	✅ Yes
Availability	❌ Discontinued	✅ Current model

💡 Key Advantage: The BP8 provides a dedicated blower output — no need to choose between Pump 3 and air massage.

✨ Key Features (Reference)

Feature	What It Does	Why It Matters
🌡️ 3.0kW Integrated Heater	Powerful heating with M7 technology	Fast, efficient heat-up
🧠 M7 Technology	Eliminates external sensors/flow switches	Simplified installation
💧 Triple-Pump Support	Control up to 3 pumps	Multiple jet zones
💨 Pump 3 OR Blower	Selectable single-speed output	Choose extra jets or air massage
🔄 Circulation Pump	Dedicated circ pump output	Energy-efficient filtration
🫧 Ozone Ready	Integrated ozone output	Cleaner water
💡 10V Lighting	Single light output (1A)	Spa ambiance
📱 WiFi Ready	Accepts compatible WiFi module	Remote control
⚡ Dual Power Options	230V single-phase or three-phase	Flexible installation
🖥️ Wide Panel Compatibility	TP Series AND SpaTouch panels	More topside choices

🔧 Technical Specifications (Reference)

Core System

Component	Specification	Details
Heater	3.0kW with M7 Technology	Sensor-free intelligent heating
Pump 1	Dual-speed OR Single-speed	With circ pump if single-speed
Pump 2	Single-speed	Dedicated jet pump output
Pump 3 OR Blower	Single-speed	Shared output — choose one
Circulation Pump	✅ Supported	Low-energy filtration pump
Ozone Output	✅ Supported	Sanitation system ready
Light Output	10V @ 1A	Standard spa lighting
WiFi	✅ Ready	Module sold separately

Electrical Specifications

Specification	Value
Power Supply	230V
Frequency	50Hz
Phase Options	Single-phase OR Three-phase
Heater Output	3.0kW

Plumbing Specifications

Specification	Value
Plumbing Size	2″
Heater Connections	2″ unions

📐 Dimensions & Footprint

Measurement	Value	Notes
Length	490 mm	Including heater assembly
Height	270 mm	Vertical dimension
Depth	100 mm	Slim profile design

🔗 Topside Panel Compatibility

Panel Type	Compatible
All Balboa TP Series	✅ Yes
All Balboa SpaTouch	✅ Yes

---

⚙️ Pump & Blower Configuration

⚠️ Important: Pump 3 and Blower share a single output. Choose one or the other — both cannot be installed simultaneously.

Pump Output Overview

Pump	Speed Options	Notes
Pump 1	Dual-speed OR Single-speed	Flexible main pump
Pump 2	Single-speed	Dedicated output
Pump 3	Single-speed	Shared with Blower
Blower	Single-speed	Shared with Pump 3
Circulation	✅ Supported	Low-energy filtration

Shared Output Configurations

Configuration	Pump 3	Blower
3 Pumps	✅ Active	❌ Not available
2 Pumps + Blower	❌ Not installed	✅ Active

Factory Default

Factory preset for single-speed pump and circulation pump. Alternative setups are configurable via test mode.

📦 What’s Included

Item	Included
BP6013G3 Control Box	✅ Yes
3.0kW Integrated Heater	✅ Yes
Topside Panel	❌ No (sold separately)
WiFi Module	❌ No (sold separately)

Quantity: Sold individually

❓ Frequently Asked Questions

Availability

Q: Is this product still available? A: No — the BP6013G3 is discontinued and no longer offered by Balboa for the aftersales market.

Q: What should I use instead? A: The Balboa BP8 (BX-BPBP8) is the recommended replacement. It offers improved capability with a dedicated blower output, higher lighting capacity, and the same excellent M7 technology.

Q: Will the BP8 work with my existing topside panel? A: Yes — both BP6013G3 and BP8 are compatible with all Balboa TP Series and SpaTouch panels.

Technical Reference

Q: What is M7 technology? A: M7 is Balboa’s intelligent heating system that eliminates the need for external temperature sensors and flow switches.

Q: What are the dimensions? A: 490 mm (L) × 270 mm (H) × 100 mm (D).

Q: What plumbing size does this use? A: 2″ plumbing connections.

📥 Documentation & Downloads

📄 BP6013G3 Technical Data Sheet — Complete specifications and technical reference

🏆 Looking for a Replacement?

The Balboa BP8 is the recommended replacement for the discontinued BP6013G3:

✅	BP8 Advantages
💧	Triple-Pump Support — Same great capability
💨	Dedicated Blower — No shared output limitation
💡	Higher Lighting Capacity — 2A vs 1A
🧠	M7 Technology — Same sensor-free intelligence
🌡️	Incoloy Heater — Premium corrosion resistance
📱	WiFi Ready — Same smartphone control
🖥️	Panel Compatibility — TP Series AND SpaTouch

➡️ View the Balboa BP8 →

🤝 Why Buy From Parts4Tubs?

✅	What You Get
🇬🇧	UK-Based Company — Local support, local expertise
🚚	Fast UK Delivery — Get your parts quickly
💬	Expert Advice — Spa specialists ready to assist
💷	Competitive Pricing — Excellent value on genuine parts
🛡️	Full Warranty — Complete manufacturer backing
↩️	Easy Returns — 30-day hassle-free returns
🔧	Technical Support — Expert help when you need it
🔗	Compatible Accessories — Everything you need in one place

✨ Summary

The Balboa BP6013G3 was a WiFi-ready spa control system featuring Balboa’s M7 technology — eliminating the need for external sensors and flow switches. With an integrated 3.0kW heater, support for three pumps (Pump 3 and blower share an output), circulation pump, ozone integration, and 10V @ 1A lighting, this system provided comprehensive control in a 490 × 270 × 100 mm package.

⚠️ This product is discontinued. The recommended replacement is the Balboa BP8 (BX-BPBP8), which offers the same great features plus a dedicated blower output (no shared connections), higher lighting capacity (2A vs 1A), and premium Incoloy heater element. Contact Parts4Tubs for assistance with your BP6013G3 replacement.

 

Hot Tub Wiring – Configuring a Balboa BP7 Spa Control 4.0kW Spa Pack

If you are using a basic setup, and by basic I mean a regular dual speed hot tub pump with a single speed blower, out of the box, your Balboa pack is likely to work without any additional configuration. However, if you are not using a separate circulation pump, the chances are you will need to “configure” the pack using the details below.

On the underside of the Spa Pack covers, you will see a circuit diagram that looks something like this.

Firstly, you need to work through the setup table at the bottom on the left hand side and work out which setup number you need. For example, a 2 speed pump and a single speed blower will need setup #12.

Next, you need to change the DIP switch settings to match your setup. Once you have the right combination of DIP switches, using the topside control you should do the following to change the pack’s setup mode to #12.

To go into the low levels follow the following steps please.

1. Turn tub off.
2. DIP switch 1 move to ON.
3. Turn tub on
4. On the top side control, Press “WARM” twice
5. Press “LIGHT”
6. Press “WARM”
7. Then use “WARM” to move down to the low levels until you get on the set up number you need.
8. Turn off tub
9. DIP switch one back to OFF
10. Turn on tub

Getting the right setup and config is important for the pack to function correctly and the buttons on the top side to do what you expect them to.

 

Balboa DIP Switches Explained

Most of the Balboa Spa Packs have a set of DIP switches that can seem a little confusing in the setup. In the most basic form, you are telling the Spa Pack how many pumps or blowers you have connected and how many it should allow to run before it turns off the heater (or let them all run at once). The reason for this is if you are limiting the amount of current the pack can draw. You are also telling the pack wither you need additional cool down times if you are using an gas/propane/ASHP additional heater. This to stop the kettling effect you can get in the heaters.

Check the circuit diagram that is on the inside of your Balboa pack and do not just copy the settings I explain below as they may be in a different order. The “logic” behind them is the same so just check what each of the DIP switches says it does.

Fixed-fuction DIP Switches 

A1 Test Mode (normally Off). 

A2 In “ON” position, add one high-speed pump (or blower) with Heater. (If you have 1 pump and NO blower use this)

A3 In “ON” position, add two high-speed pumps (or 1 HS Pump and Blower) with Heater. (If you have a pump and a blower use this)

A4 In “ON” position, add four high-speed pumps (or 3 HS Pumps and Blower) with Heater. (If you have two or three pumps and a blower use this)

You should only enable one of the A2, A3 or A4. You can use them in combinations, but it is easier just to use one.

A5 In “ON” position, enables Special Amperage Rule B.  In “OFF” position, enables Special Amperage Rule A. 

Special Amperage Rule A No Limitation (if you are not sure, set it to this. Worst case, your electric will trip if you don’t have enough current available)

Special Amperage Rule B 2 High Speed Pump Maximum, in Setups 1 – 9 1 High Speed Pump Maximum, and also Blower turns off with 1 High Speed Pump, in Setups 10 – 18 (avoid this if you can)

A6 Persistent memory reset (Used when the spa is powering up to restore factory settings as determined by software configuration). 

A2, A3, and A4 work in combination to determine the number of high-speed devices and blowers that can run before the heat is disabled. i.e. A2 and A3 in the ON position and A4 in the OFF position will allow the heater to operate with up to 3 high‑speed pumps (or two HS Pumps and Blower) running at the same time. Heat is disabled when the fourth high-speed pump or blower is turned on. 

Note: A2/A3/A4 all off = No heat with any high-speed pump or blower. 

Assignable DIP Switches 

A7 In “ON” position, enables a 5-minute cooldown for some gas heaters (Cooling Time B). In “OFF” position, enables a 1-minute cooldown for electric heaters (Cooling Time A). 

 

Who are Balboa Water Group?

Balboa Water Group is a prominent manufacturer and supplier of innovative spa and hot tub components. With a rich history spanning several decades, Balboa Water Group has established itself as a leading brand in the industry, known for its cutting-edge technology, quality craftsmanship, and exceptional customer service.

Balboa Water Group specializes in designing and manufacturing spa control systems, which serve as the brains behind the operation of hot tubs and spas. These control systems include a control panel, circuit board, and other components that regulate various functions, such as temperature control, water flow, jet activation, and lighting.

One of the key strengths of Balboa Water Group is their dedication to innovation. They continuously strive to develop new and advanced technologies that enhance the spa experience for users. From user-friendly interfaces and touchscreens to wireless connectivity and smartphone apps, Balboa control systems offer convenient and intuitive control over every aspect of the spa.

Balboa Water Group also places a strong emphasis on safety and energy efficiency. Their control systems often feature built-in safety mechanisms, such as high-limit sensors and automatic shutdowns, to protect users from potential hazards. Additionally, they incorporate energy-saving features that optimize power consumption, helping to reduce operating costs and environmental impact.

In addition to control systems, Balboa Water Group offers a comprehensive range of spa components and accessories. These include pumps, heaters, filters, jets, valves, and more. Their products are known for their durability, reliability, and compatibility with various hot tub models and brands.

Customer satisfaction is a top priority for Balboa Water Group. They provide excellent technical support, troubleshooting assistance, and product documentation to help spa owners and industry professionals make the most of their products. Balboa also collaborates closely with spa manufacturers and distributors worldwide, ensuring that their components are widely available and supported.

Balboa Water Group's commitment to quality and innovation has earned them a stellar reputation within the spa industry. Whether you are a hot tub owner, a spa designer, or a service professional, choosing Balboa products can provide you with the confidence and reliability you need to create a superior spa experience.

Overall, Balboa Water Group is a trusted and respected name in the spa industry, known for its technologically advanced spa components, commitment to customer satisfaction, and ongoing pursuit of innovation. Their products and solutions continue to elevate the spa experience for users around the world.