🌊 Blue 400M GeoBubble Solar Cover (16ft x 32ft) – Save £500+ Annually on Pool Heating 💰
Stop Wasting Money Heating Your Pool Water
The Problem: Running an uncovered 16ft x 32ft swimming pool in the UK costs the average pool owner between £800-1,200 per year in unnecessary heating expenses, plus another £150-250 in wasted chemicals and water costs. That’s over £1,000 vanishing into thin air – literally.
The Solution: This Blue 400M GeoBubble Solar Cover transforms your pool into an energy-efficient oasis, slashing heating costs by up to 70%* while dramatically reducing water evaporation and chemical consumption.
Your Annual Savings: £500-900+ per year* (typical payback period: 6-9 months)
💰 Real Money You’ll Save Every Swimming Season
Let’s break down exactly what this cover does for your wallet:
Energy Cost Reduction: £560-840 Annually*
- Heat loss prevention: Reduces heat loss by up to 75%*
- Lower heating bills: Cut heating energy consumption by up to 70%*
- Electricity savings: Save approximately 4,200-5,600 kWh per year* (based on heat pump efficiency)
- Monthly savings during season: £80-120 per month* (May-September)
Water & Chemical Savings: £180-280 Annually*
- Evaporation reduction: Prevents up to 98% of water evaporation*
- Water saved: Approximately 28,000-32,000 litres per year* (equivalent to 350+ baths)
- Chemical retention: Reduces chlorine consumption by up to 30%* (saving 4-5kg per season)
- Chemical cost savings: £120-180 per year* on reduced rebalancing needs
- Water bill reduction: £60-100 per year* (based on metered water rates)
Time & Maintenance Savings: Priceless
- Reduced cleaning: 60-70% less debris removal time
- Fewer chemical checks: Weekly testing instead of every 2-3 days
- Extended equipment life: Less strain on heating systems and pumps
🔥 How the Blue 400M GeoBubble Cover Works
This isn’t just bubble wrap for your pool – it’s engineered thermal protection.
The GeoBubble Technology Advantage
Traditional bubble covers fail quickly because standard round bubbles have weak stress points. GeoBubble technology uses a patented interconnected bubble design that:
✅ Lasts 25% longer than conventional bubble covers (4-year warranty vs. typical 2-3 years)
✅ Distributes stress evenly across the entire surface, preventing premature failure
✅ Resists UV damage better than standard materials
✅ Maintains insulation properties throughout its lifespan
400-Micron Thickness: The Smart Middle Ground
The 400M thickness strikes the perfect balance between:
Heat Retention → Air-filled bubbles create an insulating barrier that traps warmth in your pool water
Solar Transmission → Blue tint allows beneficial UV rays through while blocking algae-promoting light wavelengths
Durability → Thick enough to resist tears and UV degradation, light enough for easy handling
Cost-Effectiveness → Budget-friendly price point with professional-grade performance
How It Saves You Money Daily
During the Day:
- Sunlight passes through the blue material, warming the water by up to 3-5°C* in good conditions
- Air bubbles trap heated air against the water surface
- Blue tint filters out excessive light that promotes algae growth
At Night:
- Insulating air bubbles prevent heat from escaping into cooler night air
- Cover acts as a physical barrier against wind-accelerated cooling
- Dramatically reduces evaporation (which causes up to 70% of heat loss in uncovered pools)
The Result: Your heating system runs 60-70% less frequently*, maintaining comfortable swimming temperatures while slashing energy consumption.
📊 Blue 400M vs. No Cover: The Difference is Dramatic
| Factor | Without Cover | With Blue 400M GeoBubble | Annual Benefit |
|---|---|---|---|
| Heat Loss | 100% exposed | 75% reduction* | £560-840 saved* |
| Water Evaporation | 32,000+ litres lost | 98% prevented* | £60-100 + 400 baths saved* |
| Chemical Loss | Full exposure | 30% reduction* | £120-180 + less rebalancing* |
| Debris Cleaning | Daily/every 2 days | Weekly | 5-7 hours saved monthly |
| Algae Risk | High (sunlight exposure) | Low (blue tint filtering) | Fewer treatment shocks needed |
| Heating Duration | Continuous | 60-70% less* | Extends equipment lifespan |
See full assumptions and methodology in the Disclaimers section below
🏊 Perfect For These Pool Owners
✅ Budget-Conscious Families
This is Parts4Tubs’ most affordable GeoBubble option while still delivering professional-grade heat retention. Ideal if you want proven savings without premium pricing.
✅ Above-Ground Pool Owners
The 400M thickness is perfect for above-ground pools – durable enough to withstand daily use while remaining lightweight for manual handling without roller systems.
✅ Pools Without Algae Problems
If your pool doesn’t struggle with persistent algae, the blue tint provides adequate light filtering while maximizing solar heating potential.
✅ Moderate UK Climates
Excellent for standard UK swimming seasons (May-September) where you need reliable heat retention without extreme winter protection.
✅ First-Time Cover Buyers
New to pool covers? The 400M Blue is the perfect introduction – affordable, easy to use, and delivers immediate, measurable results.
🎯 16ft x 32ft Specification: Made for Your Pool
Coverage Area & Dimensions
- Size: 16ft x 32ft (4.88m x 9.75m)
- Coverage area: 512 square feet (47.5 m²)
- Suitable for: Rectangular pools up to 15ft x 31ft (allowing for overlap)
- Weight: Approximately 22-25 kg (manageable for 1-2 adults)
Material Specifications
- Thickness: 400 microns (0.4mm)
- Colour: Blue (selective light transmission)
- Bubble design: Patented GeoBubble interconnected structure
- Bubble orientation: Place bubbles facing DOWN into water
- Material composition: UV-stabilized polyethylene with air-retention technology
Performance Ratings
- Heat retention: Up to 75% heat loss reduction*
- Evaporation prevention: Up to 98% reduction*
- UV resistance: 4-year warranty coverage
- Temperature gain potential: 3-5°C in optimal sunlight conditions*
- Chemical protection: Up to 30% reduction in chlorine loss*
Warranty & Quality Assurance
- Material warranty: 4 years against manufacturing defects
- Manufacturing: Bespoke, made-to-order for perfect fit
- Quality control: Engineered to UK pool standards
- GeoBubble certification: Patented technology with proven longevity
❓ Common Questions About This Cover
How quickly will I see savings?
Most pool owners notice reduced heating costs within the first month. Depending on your current heating expenses, typical payback periods range from 6-9 months*, after which all savings go directly back into your pocket.
Can I use this cover with my existing equipment?
Absolutely! This cover works perfectly with:
- ✅ Heat pumps (maximizes their efficiency)
- ✅ Solar heating systems (complements solar gains)
- ✅ Gas/oil heaters (reduces runtime significantly)
- ✅ Pool pumps and filters (safe to operate while covered)
- ✅ Manual roller systems (lightweight 400M thickness)
Will the blue colour affect heating performance?
The blue tint is strategically designed. It allows beneficial UV rays through to heat the water (gaining 3-5°C* in good conditions) while filtering out wavelengths that promote algae growth. You get solar heating benefits WITHOUT increased algae risk.
Is this thick enough for good results?
Yes! The 400M thickness provides excellent heat retention for UK conditions. While thicker covers (500M-600M) offer incrementally better insulation, the 400M delivers outstanding value – typically 65-75% of the performance at 55-60% of the cost.
When to consider thicker covers:
- Exposed locations with high winds (500M+)
- Pools that struggle to maintain temperature (500M-600M)
- Maximum possible heat retention needed (600M Gold)
How do bubbles facing DOWN work better?
The air trapped inside the bubbles gets heated by the sun. When bubbles face down, this heated air sits directly against the water surface, transferring heat efficiently through conduction. Bubbles facing up would create an air gap that reduces heat transfer effectiveness.
Can I leave it on while the pump runs?
Yes! As long as the cover is properly secured, your pool pump and filtration system work normally underneath. In fact, keeping the cover on during filtration maximizes heat retention and reduces evaporation even while circulating water.
How long does it really last?
With proper care (storing during winter, avoiding harsh chemicals on the cover surface, using a roller for removal), expect 4-6 years of reliable performance. The 4-year warranty reflects GeoBubble’s superior durability compared to standard 2-3 year cover lifespans.
What’s the installation process?
Simple!
- Unroll the cover across your pool surface
- Position bubbles facing DOWN into the water
- Trim if needed for exact fit (though made-to-order sizing should be precise)
- Optional: Attach to a manual roller system for easier handling
No special tools or professional installation required.
Will this fit my pool exactly?
This is a made-to-order product manufactured specifically to 16ft x 32ft dimensions. For best results, measure your pool’s waterline dimensions (not the outer edge) and allow for a slight overlap onto the pool surround for complete coverage.
Non-standard size? Parts4Tubs offers bespoke sizing – use their solar cover calculator to get exact measurements.
What about winter use?
Solar covers are designed for swimming season (typically May-September in the UK). When closing your pool for winter:
- Remove and store the solar cover in a dry, protected location
- Switch to a winter cover designed for harsh weather protection
- Proper storage ensures your solar cover remains in excellent condition for next season
This approach maximizes the lifespan of both cover types rather than forcing one cover to do jobs it wasn’t designed for.
Does it prevent debris completely?
While this cover dramatically reduces debris (leaves, insects, pollen, dirt), it’s not a rigid safety cover. Light debris may collect on top but won’t enter the water. Simply sweep or hose off the cover surface before removal.
Important: This is NOT a safety cover and cannot support the weight of children or pets.
🌡️ Temperature & Comfort Benefits
Extend Your Swimming Season by 4-6 Weeks*
By maintaining water temperature more effectively:
- Start earlier in spring: Reach comfortable temperatures 2-3 weeks sooner
- Swim later in autumn: Retain warmth 2-3 weeks longer
- Comfortable morning swims: Water stays warm overnight instead of cooling 3-4°C
Consistent, Comfortable Water Temperature
Uncovered pools experience dramatic temperature swings:
- Day-to-night drops: 3-5°C cooling overnight
- Cloudy day impacts: 2-4°C cooler after overcast weather
- Windy day losses: 4-6°C on breezy days
With this cover: Water temperature stays consistent within 1-2°C, meaning:
- ✅ No shocking cold plunges in the morning
- ✅ Predictable comfort levels day after day
- ✅ Less “should I turn the heat up?” decision-making
Better Swimming Experience
- Cleaner water: Less debris means clearer, more inviting water
- Fewer chemicals needed: Reduced chlorine use means gentler on skin and eyes
- Stable pH levels: Less evaporation means fewer dramatic pH swings requiring adjustment
💡 Maximizing Your Cover’s Effectiveness
Best Practices for Maximum Savings
Do:
- ✅ Cover your pool every time you’re not swimming (even during the day if unused)
- ✅ Use a roller system for effortless daily deployment (makes consistency easier)
- ✅ Keep the cover surface clean (hose off debris weekly)
- ✅ Store properly during winter in a dry, protected location
- ✅ Combine with a heat pump for optimal efficiency (saves up to 7,000 kWh annually*)
- ✅ Ensure proper fit – cover should rest on water surface, not stretched tight
Don’t:
- ❌ Leave cover off “just for a few hours” (you’d lose 3-4 hours of retained heat)
- ❌ Walk on the cover (not designed to support weight)
- ❌ Allow sharp objects to contact the surface
- ❌ Use harsh chemical cleaners on the cover material
- ❌ Leave bunched up in direct sunlight when stored
Complementary Investments for Even Greater Savings
Manual Roller System (£80-150): Makes daily deployment effortless – covers/uncovers pool in 60 seconds instead of 10+ minutes. This convenience dramatically increases consistency of use (and therefore savings).
Heat Pump (if you don’t have one): The combination of a solar cover + modern heat pump delivers the most cost-effective pool heating available. Together they can reduce heating costs by 75-85% compared to uncovered pools with gas/oil heaters.
Pool Thermometer (£10-25): Track your water temperature to see exactly how much the cover is working. Many pool owners are amazed to discover 3-4°C gains on sunny days.
🔍 How This Compares to Other Thickness Options
400M Blue (This Product) vs. 500M Covers
| Aspect | 400M Blue | 500M Gold/Sol+Guard |
|---|---|---|
| Price | Most affordable GeoBubble option | 30-40% more expensive |
| Heat Retention | Excellent (70-75% reduction*) | Outstanding (75-80% reduction*) |
| Durability | 4-6 years typical lifespan | 5-7 years typical lifespan |
| Weight | Lighter (easier manual handling) | Slightly heavier |
| Best For | Budget-conscious, above-ground pools, first-time buyers | Maximum heat retention, exposed locations |
| Value Rating | ⭐⭐⭐⭐⭐ (Best value per £ spent) | ⭐⭐⭐⭐ (Premium performance) |
400M Blue vs. 600M Gold
The 600M Gold is Parts4Tubs’ premium option with aluminum backing and maximum thickness. It delivers absolute best-in-class heat retention but costs 60-80% more than the 400M Blue.
Choose 600M Gold if:
- You have budget for maximum possible savings
- Pool struggles significantly to hold temperature
- Very exposed location (coastal, hilltop, windy areas)
- Want longest possible lifespan (6-8+ years)
Choose 400M Blue if:
- You want proven savings without premium pricing
- Standard UK residential location
- Above-ground or smaller pool
- First-time cover buyer wanting to test the concept
Reality check: The 400M Blue will deliver 75-85% of the 600M’s performance at 40-50% of the cost. For most pool owners, this represents better overall value.
⚠️ Important Safety & Limitation Information
This Is NOT a Safety Cover
- ❌ Cannot support weight: Not designed to hold children, adults, or pets
- ❌ Not a winter cover: Remove and store during winter months
- ❌ Not a rigid barrier: Solar covers are flexible, lightweight thermal blankets
If safety is a priority: Consider installing a perimeter fence OR upgrading to a dedicated safety cover that can support weight. Solar covers excel at heat retention and cost reduction but serve a different purpose than safety covers.
Usage Limitations
- Seasonal use only: Designed for swimming season (May-September typically)
- Manual handling required: This size requires 1-2 adults or a roller system for easy deployment
- Not chemically resistant: Avoid direct contact with undiluted pool chemicals
- UV exposure limits: Store out of direct sunlight when not in use to maximize lifespan
📋 Complete Disclaimers & Assumptions
We believe in transparency. All savings estimates are based on the following assumptions and calculations:
Energy Savings Calculations*
Baseline Pool: 16ft x 32ft (512 sq ft / 47.5 m²), average depth 4.5ft, approximately 87,000 litres
Location: UK climate, average swimming season May-September (21 weeks)
Heating System: Electric heat pump (COP 5.0) or equivalent
Energy Costs: £0.24 per kWh (UK average as of 2024-2025)
Heat Loss Reduction: 70-75% with cover vs. uncovered pool
Heating Runtime: Estimated 4-6 hours daily for uncovered pool; 1.5-2 hours with cover
Calculation:
- Uncovered pool: ~5,600-7,000 kWh per season = £1,344-1,680 annually
- Covered pool: ~1,400-2,100 kWh per season = £336-504 annually
- Estimated savings: £560-840 per season (covers May-September typical use)*
Water & Chemical Savings Calculations*
Evaporation Prevention:
- Uncovered pool: ~32,000 litres lost per season (based on 4x8m pool scaled proportionally)
- With cover: 98% reduction = ~28,800-31,360 litres saved
- Water cost: £1.90-3.20 per 1,000 litres (UK metered water average)
- Water savings: £55-100 annually*
Chemical Reduction:
- Chlorine consumption: 30% reduction with cover = 4-5 kg saved per season
- Chlorine cost: £20-35 per kg average
- Reduced pH/alkalinity adjustments: ~£40-60 per season
- Chemical savings: £120-180 annually*
Total Annual Savings Summary*
- Energy: £560-840
- Water: £55-100
- Chemicals: £120-180
- *Combined typical savings: £735-1,120 per season
- Conservative estimate used in marketing: £500-900+ (accounts for variability)**
Factors That Affect Individual Results
Your actual savings will vary based on:
Pool-Specific Variables:
- Exact pool dimensions and volume
- Pool surface area exposed to wind
- Sheltered vs. exposed location
- Above-ground vs. in-ground construction
- Starting water temperature preferences
Environmental Factors:
- Local UK microclimate (southern regions vs. northern)
- Amount of direct sunlight received
- Average wind speeds in your area
- Humidity levels
- Frequency of rainfall
Usage Patterns:
- How consistently you use the cover (daily use = maximum savings)
- Length of your swimming season
- Desired water temperature (warmer = more heating needed)
- Frequency of pool use
- Number of swimmers (affects chemical consumption)
Existing Equipment:
- Type of heating system (heat pump, gas, oil, solar)
- Age and efficiency of equipment
- Insulation of pipework
- Quality of pool construction
Energy Costs:
- Your specific electricity/gas rates
- Regional variations in utility pricing
- Time-of-use tariffs if applicable
Performance Specifications Sources
- Heat loss reduction (75%): Industry-standard testing for 400-micron pool covers
- Evaporation reduction (90-98%): Manufacturer specifications for GeoBubble technology
- Chemical savings (30%): Based on reduced UV degradation of chlorine + reduced water replacement needs
- GeoBubble lifespan (25% longer): Manufacturer comparative testing vs. standard bubble covers
- Temperature gain (3-5°C): Typical performance under UK sunlight conditions (not guaranteed)
Warranty Limitations
The 4-year material warranty covers manufacturing defects only. It does NOT cover:
- Damage from improper storage
- Tears from sharp objects or mishandling
- Degradation from chemical contact
- Wear from improper installation
- Normal aging and UV exposure beyond warranty period
Made-to-Order Notice
This is a bespoke manufactured product made specifically to order. Please ensure measurements are accurate before ordering, as custom-sized covers typically cannot be returned unless defective.
💰 Investment Breakdown: Is It Worth It?
The Numbers Don’t Lie
Your Investment: Approximately £220-280 (check current pricing)
Annual Savings: £500-900+ per season*
Payback Period: 4-9 months* of swimming season use
Years 2-6: Pure savings of £2,500-5,400* over cover lifespan
Cost Per Day of Use
Swimming Season: 21 weeks (May-September) = ~147 days
Cover Lifespan: 4-6 years = 588-882 days of use
Cost per day: £0.25-0.48
Savings per day: £3.40-6.12*
Net benefit per day: £2.92-5.64 saved*
Every single day you use this cover, it pays you back over £3-6 in prevented costs.
What Else Could You Buy with Those Savings?
The £500-900 you save annually could cover:
- ✅ Annual pool maintenance service
- ✅ Complete water chemistry testing kit + chemicals for the year
- ✅ Pool heating system service and repairs
- ✅ Upgrade to LED pool lighting
- ✅ New pool cleaning equipment
- ✅ Family swimming pool accessories and toys
- ✅ Simply keep the money – it’s yours to spend however you wish!
🎯 Why Buy from Parts4Tubs?
GeoBubble Expertise
Parts4Tubs specializes in premium GeoBubble solar covers with proven UK performance. This isn’t generic bubble wrap – it’s engineered pool protection backed by years of customer results.
Made-to-Order Precision
Every cover is manufactured to exact specifications, ensuring perfect fit for your pool dimensions. No compromising with “close enough” standard sizes.
4-Year Warranty Confidence
The extended warranty reflects genuine quality. Budget covers often come with 1-2 year warranties because manufacturers know they won’t last longer. GeoBubble technology is built to outlast and outperform.
UK-Focused Solutions
All recommendations and specifications are tailored to UK pool ownership, UK climate conditions, and UK energy costs. No generic advice from international suppliers unfamiliar with British swimming seasons.
Bespoke Sizing Available
Non-standard pool shape or size? Parts4Tubs offers custom sizing using their solar cover calculator to ensure perfect coverage for any pool configuration.
Expert Guidance Available
Not sure if this is the right cover for your specific needs? Parts4Tubs’ knowledgeable team can help you select the ideal solution for your pool, location, and priorities.
🏁 Ready to Start Saving?
This Blue 400M GeoBubble Solar Cover delivers professional-grade heat retention at a budget-friendly price point. For most UK pool owners, it represents the sweet spot of performance, durability, and value.
Every day without a cover is money flowing out of your pool – literally evaporating into the air alongside your heated water.
Your Next Steps:
- Verify your pool dimensions – This cover is made-to-order for 16ft x 32ft pools
- Need a different size? – Use Parts4Tubs’ solar cover calculator for custom dimensions
- Questions about suitability? – Contact Parts4Tubs’ expert team for personalized advice
- Ready to order? – This is a bespoke manufactured item, so order now to secure your cover for the season
The sooner you start using this cover, the more money you save. A pool owner who orders in March vs. June saves an additional £150-200 in early season heating costs alone.


