⚠️ Balboa AX10-A2 Auxiliary Control Panel (Jets 2) – Remote Jet Control for Larger Spas

🌟 Single-button auxiliary panel for Jets 2 control from a secondary location – compatible with GL and BP spa systems

⚠️ DISCONTINUED PRODUCT NOTICE

This product (TS-AX102) has been discontinued by Balboa.

Recommended Replacement: TS-AX112 (overlay to be added separately)

If you require this exact model for matching existing installations, limited stock may be available. Contact Parts4Tubs for availability.

📋 Product Overview

The Balboa AX10-A2 Auxiliary Control Panel is a compact single-button remote control designed for larger hot tubs and spas where users need to activate Jets 2 (the second jet pump) from a secondary location away from the main topside controls. This auxiliary panel provides convenient remote access to your second jet pump without needing to reach the main control panel.

Featuring a circular design with 54 mm diameter, the AX10-A2 fits into a standard 32 mm hole and comes with an impressive 5-metre cable length, allowing flexible installation at various positions around the spa. Operating at 12V, this panel connects via a 6-pin connector (2 rows of 3 pins) to the spa pack’s auxiliary port.

The AX10-A2 is compatible with all GL Systems (including GL2000 and GL8000) as well as BP series spa packs, making it versatile for a wide range of Balboa-controlled hot tubs. The connector fits any port with a 6-pin slot connection on the PCB. This model includes the overlay for ready installation.

⭐ Key Features

• ✅ Jets 2 Control – Dedicated second jet pump activation
• ✅ Wide Compatibility – Works with all GL Systems and BP systems
• ✅ 5-Metre Cable – Long reach for flexible positioning
• ✅ Compact Circular Design – 54 mm diameter
• ✅ Standard Hole Size – Fits 32 mm cutout
• ✅ Remote Installation – Control jets away from main topside
• ✅ 12V Operation – Safe low voltage design
• ✅ 6-Pin Connection – 2 rows of 3 pins connector
• ✅ Overlay Included – Ready to install
• ✅ Universal Port Fit – Fits any 6-pin slot on PCB

🔧 Technical Specifications

Specification	Value
Manufacturer	Balboa
Model	AX10-A2
Model Series	AX
Product Type	Auxiliary Panel
SKU	TS-AX102
Number of Buttons	1
Button Function	Jets 2
Cable Length	5 m
Panel Diameter	54 mm
Fits Hole Size	32 mm
Operating Voltage	12V
Connection Type	6 Small Plastic Pins (2 Rows of 3)
Maximum Pumps Controlled	1
Blower/Auxiliary Outputs	0
Overlay Included	✅ Yes
Box Quantity	1 unit
Status	⚠️ DISCONTINUED
Replacement Model	TS-AX112

🔗 Compatibility Guide

This Auxiliary Panel is Compatible With:

Spa Pack Series	Models	Confirmed
GL Series	All GL Systems	✅
GL Series	GL2000	✅
GL Series	GL8000	✅
BP Series	BP Systems	✅

Connection Compatibility:

The AX10-A2 plug fits onto any port with a 6-pin slot connection on the spa pack PCB. This universal 6-pin connection ensures broad compatibility across Balboa control systems.

⚠️ Important: This panel controls Jets 2 (second jet pump). Ensure your spa pack has a second pump configured before installation.

🔘 Button Function

Single Button Operation:

Button	Function
JETS 2	Activate/deactivate jet pump 2

Operating Notes:

• Press once to activate Jets 2
• Press again to cycle through speed settings (if multi-speed pump)
• Press again to deactivate
• Behaviour depends on spa pack configuration

🎯 Purpose & Application

What is an Auxiliary Panel?

Unlike main topside control panels that provide full spa control (temperature, all pumps, lights, modes), auxiliary panels are secondary controls designed to operate specific functions from remote locations around the spa.

AX10-A1 vs AX10-A2:

Model	Controls	Use Case
AX10-A1	Jets 1 (Pump 1)	Primary jet pump remote control
AX10-A2	Jets 2 (Pump 2)	Secondary jet pump remote control

Why Use an AX10-A2?

Scenario	Benefit
Large hot tubs with 2+ pumps	Control second pump from remote location
Swim spas	Activate Jets 2 from swimming area
Therapy zones	Dedicated control for therapy jets
Multi-zone spas	Independent control of different jet zones

Typical Installation Locations:

• Near seating areas served by Pump 2
• Opposite end of spa from main topside
• Adjacent to therapy jet zones
• Secondary user positions in large spas

⚙️ Installation Guide

Before Installation:

• ⚠️ Disconnect power to spa at the isolator/breaker before any work
• ⚠️ Verify your spa pack has Jets 2 (second pump) configured
• ⚠️ Locate available 6-pin auxiliary port on PCB
• ⚠️ Plan cable routing (5 m available length)
• ⚠️ Prepare 32 mm hole at desired location

Installation Steps:

1. Turn off power at the isolator/breaker
2. Drill or prepare 32 mm hole at desired auxiliary control location
3. Route the 5 m cable from installation point to spa pack
4. Connect the 6-pin connector to any available 6-pin slot on the PCB
5. Mount the AX10-A2 panel in the 32 mm hole
6. Secure panel and ensure watertight seal
7. Restore power and test Jets 2 function

Mounting Information:

Specification	Detail
Panel Diameter	54 mm
Required Hole Size	32 mm
Cable Length	5 m
Connection	6 small plastic pins (2 rows of 3)
Mounting Type	Push-fit into hole

⚠️ Professional installation recommended for drilling into spa shell and ensuring watertight sealing.

⚡ Wiring & Connection

Connector Information:

Specification	Detail
Connector Type	6 Small Plastic Pins
Pin Configuration	2 Rows of 3 Pins
Cable Length	5 metres
Operating Voltage	12V

Connection Location:

The AX10-A2 connector fits any port with a 6-pin slot connection on the spa pack PCB. Compatible with all GL Systems (GL2000, GL8000, etc.) and BP series spa packs.

⚠️ Never force the connector. The 6-pin auxiliary connector is different from the 8-pin main topside connector. Ensure you connect to the correct port type.

🔍 Troubleshooting

Common Issues:

Problem	Possible Cause	Solution
Button not responding	No power or loose connection	Check power and reseat 6-pin connector
Jets 2 don’t activate	Pump 2 not configured or faulty	Check pump 2 configuration and connections
Jets 1 activates instead	Connected to wrong auxiliary port	Check wiring corresponds to Jets 2
Intermittent operation	Cable damage or poor connection	Inspect cable and connectors
Panel loose in hole	Incorrect hole size or worn mounting	Check 32 mm hole size

Important Notes:

• The AX10-A2 only controls Jets 2 – it cannot control Jets 1 or other functions
• Ensure your spa pack has a second pump installed and configured
• If Jets 2 doesn’t work from the AX10-A2 but works from main topside, check auxiliary port connection

🧹 Maintenance & Care

Routine Care:

Task	Frequency
Wipe with soft damp cloth	Weekly
Check button response	Monthly
Inspect cable condition	Annually
Check watertight seal	Annually

DO NOT:

• ❌ Use abrasive cleaners
• ❌ Pull or stress the cable
• ❌ Submerge cable connections
• ❌ Force button operation

🎯 Ideal Applications

Application	Suitability
♨️ Spas with 2+ jet pumps	✅ Ideal
♨️ Large hot tubs (6+ person)	✅ Ideal
🏊 Swim spas with dual pumps	✅ Ideal
♨️ Therapy/hydrotherapy spas	✅ Ideal
🔄 Replacement for faulty AX10-A2	✅ Exact match
♨️ Single pump spas	❌ Not applicable

Common Replacement Scenarios:

• 💔 Non-responsive button
• 🔌 Damaged cable
• 💧 Water ingress damage
• 🔘 Worn overlay

❓ Frequently Asked Questions

Q: What is the difference between AX10-A1 and AX10-A2?

A: The AX10-A1 controls Jets 1 (first jet pump) while the AX10-A2 controls Jets 2 (second jet pump). They are otherwise identical in specifications.

Q: Can this panel control Jets 1 or other functions?

A: No, the AX10-A2 is specifically configured for Jets 2 control only. For Jets 1 remote control, you need the AX10-A1.

Q: Which spa packs is this compatible with?

A: The AX10-A2 is compatible with all GL Systems (including GL2000, GL8000) and BP series spa packs. The connector fits any 6-pin slot on the PCB.

Q: This product is discontinued – what should I use instead?

A: The recommended replacement is TS-AX112. Note that the overlay needs to be added separately with the replacement model.

Q: Is the overlay included?

A: Yes, this model (TS-AX102) includes the overlay. Note that the replacement model (TS-AX112) requires the overlay to be purchased separately.

Q: Do I need a second pump for this to work?

A: Yes, the AX10-A2 controls Jets 2, which requires your spa to have a second jet pump installed and configured in the spa pack.

Q: Can I use this with a BP series spa pack?

A: Yes, the AX10-A2 is confirmed compatible with BP series spa packs as well as all GL Systems.

Q: What size hole do I need to drill?

A: The AX10-A2 requires a 32 mm diameter hole. The panel itself is 54 mm in diameter (the flange that sits on top of the spa shell).

🏆 Why Choose the Balboa AX10-A2

• ✅ Genuine Balboa Quality – Manufactured to Balboa’s standards
• ✅ Jets 2 Control – Dedicated second pump activation
• ✅ Wide Compatibility – Works with all GL and BP systems
• ✅ 5-Metre Cable – Generous length for flexible installation
• ✅ Compact Design – 54 mm diameter, fits 32 mm hole
• ✅ 12V Safety – Safe low voltage operation
• ✅ Overlay Included – Ready to install

⚠️ Note: This product is discontinued. Consider TS-AX112 for new installations.

🤝 Why Buy from Parts4Tubs

• ✅ UK-based company with local support
• ✅ Fast UK delivery
• ✅ Expert advice from spa specialists
• ✅ Auxiliary panel compatibility assistance
• ✅ Replacement model (TS-AX112) available
• ✅ Full warranty support
• ✅ Easy returns within 30 days

✨ Summary

The Balboa AX10-A2 Auxiliary Control Panel is a single-button remote control for Jets 2 (second jet pump), designed for larger hot tubs and swim spas with multiple pumps. Compatible with all GL Systems (GL2000, GL8000) and BP series spa packs. Featuring a compact 54 mm diameter circular design that fits a 32 mm hole, with 5-metre cable length and 12V operation via 6-pin connector (2 rows of 3). The overlay is included for ready installation. This product is discontinued – recommended replacement is TS-AX112 (overlay separate). Contact Parts4Tubs for availability or replacement options.