Astral Pool Pro Elyo Touch PET 30 – 28kW Swimming Pool Heat Pump with Digital Touch Control

Why Choose the Astral Pro Elyo Touch PET 30? 💡

Experience ultimate swimming comfort with the Astral Pool Pro Elyo Touch PET 30, a premium 28kW heat pump engineered for efficient, reliable pool heating. Featuring an intuitive digital touchscreen and advanced R32 refrigerant technology, this heat pump delivers powerful performance while keeping running costs low.

Perfect for medium to large residential pools, the Pro Elyo Touch PET 30 combines cutting-edge heating technology with user-friendly controls, ensuring your pool stays at the perfect temperature throughout the swimming season. With its robust titanium heat exchanger and whisper-quiet operation, this heat pump offers the ideal balance of performance, efficiency, and convenience.

Ideal For:

• Residential swimming pools up to 120m³ (26,000 gallons)
• Pool owners seeking energy-efficient heating solutions
• Year-round swimming comfort in temperate climates
• Replacing outdated gas or electric heaters
• New pool installations requiring reliable heating

🌟 Key Features & Benefits

✅ 28kW Heating Capacity – Powerful performance for pools up to 120m³, delivering rapid heat-up times and consistent temperature maintenance

✅ Digital Touchscreen Control – Intuitive interface allows easy temperature adjustment and system monitoring at your fingertips

✅ R32 Refrigerant Technology – Environmentally friendly refrigerant with superior heat transfer properties and lower global warming potential

✅ Premium Titanium Heat Exchanger – Corrosion-resistant design ensures long-lasting performance even with saltwater pools and harsh chemicals

✅ Ultra-Quiet Operation – Advanced fan and compressor design minimizes noise pollution for peaceful poolside relaxation

✅ Intelligent Defrost System – Automatic defrost cycle maintains optimal performance even in cooler conditions

✅ Compact Footprint – Space-saving design fits easily into most pool equipment areas without compromising power

📊 Complete Technical Specifications

Heating Performance

Electrical Specifications

Hydraulic Specifications

Physical Dimensions & Installation

Control & Display

Warranty & Compliance

🌊 Pool Sizing Guide – Is This Heat Pump Right for You?

Choosing the correct heat pump size is crucial for efficient heating. The Pro Elyo Touch PET 30 is ideally suited for the following pool sizes:

💡 Pro Tip: For covered or indoor pools, you can typically size up one category as heat loss is significantly reduced. Outdoor uncovered pools in exposed locations may require more heating capacity.

⏱ Estimated Heat-Up Times

Understanding how long it takes to heat your pool helps you plan usage and manage expectations. These estimates are based on standard calculations using the Pro Elyo Touch PET 30’s 28kW output.

Heat-Up Time Table (Uncovered Pool, Moderate Weather)

Formula Used: Time (hours) = (Pool Volume in m³ × Temperature Rise in °C × 1.16) ÷ 28 kW

Heat-Up Time Table (Covered Pool or Indoor)

Covered pools retain heat much better, reducing heat-up time by approximately 30-40%

⚠ Important Disclaimers:

• These are estimates only and actual times will vary based on many factors
• Ambient air temperature significantly affects performance
• Wind, humidity, and pool location impact heat loss
• Initial heat-up takes longer than daily temperature maintenance
• Using a pool cover when not swimming can reduce heating time by 30-50%
• For best results, maintain consistent heating rather than cooling and reheating

💰 Running Cost Comparison – Save Money with Heat Pump Technology

Heat pumps are significantly more economical than traditional pool heating methods. Here’s how the Pro Elyo Touch PET 30 compares:

Cost Per kWh of Heat Delivered (Approximate)

Based on electricity at £0.34/kWh and gas at £0.10/kWh (2024 UK average rates)

*For 70m³ pool, heating season April-October, maintaining 26-28°C

💡 Key Savings Insight: For every £1 you spend on electricity, the Pro Elyo Touch PET 30 delivers approximately £5.50 worth of heat energy. This 450% efficiency means dramatically lower running costs compared to any fuel-burning heating system.

🔧 Installation Requirements & Clearances

Placement Guidelines

Ideal Installation Location:

• Outdoor installation only (unit is NOT suitable for indoor installation)
• Well-ventilated area with unrestricted airflow
• Level, stable concrete pad or dedicated mounting frame
• Protected from prevailing winds when possible
• Away from bedroom windows (noise consideration)
• Close to pool filtration system to minimize pipe runs

Minimum Clearance Requirements

                    FRONT (Air Intake)
                        3000mm
                           ↓
              ┌─────────────────────┐
              │                     │
  SIDE 500mm ←│   PRO ELYO TOUCH   │→ SIDE 500mm
              │      PET 30         │
              │                     │
              └─────────────────────┘
                           ↑
                    REAR (Air Discharge)
                        300mm

⚠ Critical Installation Notes:

• Never restrict airflow to the front (intake) or rear (discharge)
• Do not install in enclosed spaces or under low overhangs
• Ensure condensate drainage is directed away from the unit
• Position away from garden plants that could obstruct airflow
• Allow access for annual maintenance and servicing

Electrical Installation

Professional electrician required – This unit must be installed by a qualified electrician in accordance with current UK wiring regulations (BS 7671).

Requirements:

• Dedicated 32A Type C MCB circuit breaker
• 6mm² armoured cable (length dependent on run)
• RCD protection (30mA trip)
• Isolation switch within 3m of unit
• Weatherproof cable entry glands
• Proper earthing to pool bonding system

Hydraulic Installation

Water Connection Specifications:

• 50mm PVC pipe unions (included with unit)
• Install after pool filter and chemical dosing
• Install isolation valves for servicing
• Water flow rate: 8-12 m³/h (verify with pump capacity)
• Bypass installation recommended for flow control
• Ensure adequate water flow to prevent low-flow errors

📈 Seasonal Performance Expectations

Understanding how your heat pump performs throughout the year helps you maximize efficiency and plan your swimming season.

Performance by Season (UK Climate)

Maximizing Seasonal Efficiency

Spring Pool Opening:

• Start heating 2-3 weeks before desired swimming date
• Use a solar cover to accelerate heat gain
• Heat during warmest part of day (2pm-6pm) initially

Summer Operation:

• Run heat pump during off-peak electricity hours if possible
• Maintain temperature rather than daily heating cycles
• Pool cover reduces heat loss by up to 70% overnight

Autumn Extension:

• Pool covers become essential for heat retention
• Reduce target temperature by 1-2°C to minimize costs
• Monitor weather forecasts for cold snaps

Winter Shutdown (or year-round use):

• For winterization: drain heat exchanger completely
• For winter swimming: expect higher running costs but operation down to -5°C air temperature

❓ Frequently Asked Questions

General Operation

Q: How does a pool heat pump work?
A: A heat pump works like a reverse refrigerator, extracting heat energy from the outside air and transferring it to your pool water. Even when air feels cold (down to -5°C), it contains heat energy that the heat pump can capture and amplify. For every 1 kW of electricity consumed, the Pro Elyo Touch PET 30 delivers approximately 5.5 kW of heat to your pool (COP 5.5), making it far more efficient than electric or gas heaters.

Q: What size pool is the PET 30 suitable for?
A: The Pro Elyo Touch PET 30 is ideally suited for pools between 60-120m³ (60,000-120,000 litres). For reference, a typical 10m x 5m pool with 1.5m average depth is approximately 75m³. Smaller pools will heat faster, while pools at the upper end of this range will require longer heat-up times but will still maintain temperature efficiently.

Q: How much does it cost to run?
A: Running costs vary based on pool size, target temperature, ambient conditions, and pool covering. As an estimate, heating a 70m³ pool throughout a typical UK swimming season (April-October) costs approximately £300-600 per year in electricity. This is 70-80% cheaper than electric resistance heating and 50-60% cheaper than gas heating. Using a pool cover when not swimming can reduce costs by a further 40-50%.

Q: How loud is the Pro Elyo Touch PET 30?
A: The unit operates at 48-52 dB(A) measured at 10 meters distance, which is comparable to a quiet conversation or light rainfall. The sound is a low hum from the fan and compressor. We recommend installing the unit away from bedroom windows and outdoor seating areas where possible, though most customers find the noise level very acceptable.

Installation & Setup

Q: Can I install this heat pump myself?
A: While mechanically inclined individuals can handle the physical positioning and some plumbing work, professional installation is strongly recommended and typically required for warranty validation. Electrical connection must be performed by a qualified electrician according to BS 7671 regulations. Incorrect installation can damage the unit, void warranty, and create safety hazards.

Q: Does the heat pump need to be installed indoors or outdoors?
A: The Pro Elyo Touch PET 30 must be installed outdoors. It is designed to extract heat from outdoor air and features a weatherproof enclosure rated IPX4. The unit will not function correctly indoors and could cause humidity problems and insufficient air circulation. Ensure it’s positioned with adequate clearances (3m front, 0.5m sides, 0.3m rear).

Q: How far can the heat pump be from the pool?
A: Ideally, install the heat pump as close to your pool filtration system as practical, typically within 5-10 meters. Longer pipe runs increase heat loss, reduce efficiency, and require larger diameter piping to maintain flow rates. Every meter of pipe loses a small amount of heat, so minimizing distance improves performance.

Q: What maintenance does the heat pump require?
A: The Pro Elyo Touch PET 30 requires minimal maintenance:

• Monthly: Visual inspection for debris, leaves, or obstructions around air intake/discharge
• Monthly: Check water flow and filter pressure
• Seasonally: Clean air intake coil with gentle water spray (never use pressure washer)
• Annually: Professional service including refrigerant check, electrical connections, and safety testing
• End of season (if winterizing): Drain heat exchanger completely to prevent freeze damage

Performance & Efficiency

Q: Can the heat pump heat my pool in winter?
A: Yes, the Pro Elyo Touch PET 30 can operate in air temperatures as low as -5°C, making year-round pool heating possible in the UK. However, efficiency decreases as ambient temperature drops. Winter heating is viable but will have higher running costs (COP drops to 2.5-3.5 vs. 5.5 in summer). A pool cover becomes essential for winter swimming to minimize heat loss. Many customers choose to winterize their pool and heat pump during December-February.

Q: What is COP and why does it matter?
A: COP (Coefficient of Performance) measures heat pump efficiency. A COP of 5.5 means for every 1 kW of electricity consumed, the heat pump produces 5.5 kW of heat. Traditional electric heaters have a COP of 1.0 (1 kW in = 1 kW out). The Pro Elyo Touch’s COP of 5.5 makes it approximately 450% more efficient than electric heaters, translating directly into lower running costs.

Q: Will a pool cover really make a big difference?
A: Absolutely. An uncovered pool can lose 70-80% of its heat through evaporation overnight. A quality pool cover reduces heat loss by 50-70%, meaning:

• Faster heat-up times
• Lower running costs (potentially 40-50% reduction)
• Extended swimming season
• Reduced chemical consumption
  Even a basic solar cover provides significant benefits and pays for itself within one season through energy savings.

Q: How long does it take to heat my pool initially?
A: Initial heat-up time depends on pool volume, starting temperature, and target temperature. For example, heating a 70m³ pool from 15°C to 28°C (a 13°C rise) takes approximately 38 hours of runtime uncovered, or about 26 hours if covered. This typically translates to 3-5 days in spring conditions when running 8-12 hours per day. Once at temperature, the heat pump only needs to run a few hours daily to maintain temperature.

Technical & Compatibility

Q: Is the PET 30 compatible with saltwater pools?
A: Yes, absolutely. The Pro Elyo Touch PET 30 features a titanium heat exchanger specifically chosen for its exceptional corrosion resistance. Titanium is completely compatible with saltwater chlorination systems, traditional chlorine, bromine, and all standard pool chemicals. This makes the PET 30 ideal for both traditional and salt pool systems.

Q: What is R32 refrigerant and is it better than older types?
A: R32 is a modern, environmentally friendly refrigerant that has replaced older R410A and R22 gases. Benefits include:

• Lower Global Warming Potential: 68% lower GWP than R410A
• Better Heat Transfer: More efficient heat exchange properties
• Future-Proof: Compliant with current and anticipated environmental regulations
• Easier Servicing: Simpler for technicians to handle and recharge
  R32 is now the industry standard for new heat pumps.

Q: Will the heat pump work with my existing pool pump and filter?
A: The Pro Elyo Touch PET 30 requires a water flow rate of 8-12 m³/h (approximately 2.2-3.3 litres per second) to operate correctly. Most standard pool filtration pumps for 60-120m³ pools provide adequate flow. The heat pump is installed in-line after your filter, so it works alongside your existing system. A bypass valve installation is recommended for flow optimization and maintenance access.

✅ What’s Included in the Box

• 1 × Astral Pool Pro Elyo Touch PET 30 heat pump unit
• 1 × Digital touchscreen control panel (pre-installed)
• 2 × 50mm PVC union connectors for water inlet/outlet
• 1 × Drainage plug and cap
• 1 × Installation and operation manual
• 1 × Quick start guide
• Manufacturer warranty documentation

Not Included (required for installation):

• Electrical supply cable and connection materials
• Mounting pad or frame
• Additional plumbing fittings, valves, or pipe
• Bypass kit (recommended)
• Professional installation service

🛡️ Warranty & Support

Standard Manufacturer Warranty:

• 2 years comprehensive parts and labour coverage
• 5 years compressor warranty (sealed system component)

Warranty Conditions:

• Installation by qualified professional required
• Unit must be registered within 30 days of installation
• Annual servicing recommended (may be required for extended warranty)
• Proof of purchase required for all claims

UK Technical Support:
Astral Pool provides technical support for installers and pool professionals. End-users should contact their installer or Parts4Tubs customer service for warranty claims and technical assistance.

📦 Delivery Information

Standard Delivery: Free delivery available to most UK mainland addresses (check at checkout)

Delivery Details:

• Kerbside delivery (driver will not install)
• Item weight: 98kg – ensure adequate assistance for unloading
• Typical delivery: 3-5 working days from order
• Package dimensions: Approximately 1100 x 500 x 950mm

Important: Inspect packaging for damage before signing for delivery. Report any visible damage to the courier and Parts4Tubs immediately.

🌍 Environmental & Efficiency Credentials

✅ R32 Low-GWP Refrigerant – 68% lower global warming potential than previous generation refrigerants

✅ High Seasonal Efficiency – COP up to 5.5 reduces electricity consumption and carbon footprint

✅ Titanium Heat Exchanger – Long service life reduces waste and replacement frequency

✅ Renewable Energy Compatible – Works excellently with solar PV systems for near-zero running costs

✅ Reduced Chemical Usage – Consistent water temperature reduces chemical degradation

✅ CE Certified – Meets all European safety and environmental standards

Carbon Footprint Comparison:
Compared to a gas pool heater, the Pro Elyo Touch PET 30 can reduce your pool heating carbon emissions by approximately 60-70%, even when powered by grid electricity. When combined with renewable electricity (solar panels, green energy tariff), carbon emissions approach zero.

💡 Pro Tips for Optimal Performance

1. Invest in a Quality Pool Cover
A pool cover is the single most effective way to reduce heating costs. It prevents 50-70% of heat loss through evaporation and can cut running costs nearly in half.

2. Set Realistic Temperature Expectations
Every degree above 28°C significantly increases running costs. Most swimmers find 26-28°C perfectly comfortable – avoid unnecessarily high temperatures.

3. Heat During Warmer Hours
In spring and autumn, run the heat pump during the warmest part of the day (2pm-7pm) when COP is highest for maximum efficiency.

4. Maintain Proper Water Chemistry
Balanced water chemistry protects the titanium heat exchanger and maintains optimal heat transfer. Check pH, alkalinity, and sanitizer levels weekly.

5. Keep Air Vents Clear
Regularly check that leaves, grass clippings, and debris haven’t accumulated around the air intake. Restricted airflow reduces efficiency and can cause shutdowns.

6. Use Timer Functions Wisely
Program the heat pump to run during off-peak electricity hours if you’re on a time-of-use tariff. However, prioritize running during warmer air temperatures for best efficiency.

7. Don’t Frequently Turn Off Completely
Maintaining pool temperature is more efficient than repeated cool-down and reheat cycles. Reduce target temperature by 2-3°C during non-use periods rather than turning off entirely.

8. Consider Solar Thermal Integration
The Pro Elyo Touch works excellently alongside solar thermal panels, using free solar heating during sunny days and the heat pump for supplemental heating as needed.

📞 Need Help Choosing or Have Questions?

The Parts4Tubs team is here to help you select the right pool heating solution for your specific needs.

We Can Help With:

• Pool sizing and heat pump selection
• Installation planning and requirements
• Technical specifications clarification
• Warranty registration and support
• Spare parts and accessories

📄 Downloads & Documentation

⚠ Note: PDF documentation for this product is not currently available on this page. We recommend contacting Astral Pool directly or Parts4Tubs customer service to request:

• Installation manual

Parts4Tubs is working to add comprehensive downloadable documentation to all product pages. Please check back soon or contact us to request specific documents.

🛒 Ready to Transform Your Pool Heating?

The Astral Pool Pro Elyo Touch PET 30 represents the perfect balance of power, efficiency, and user-friendly operation. With its 28kW output, advanced R32 refrigerant technology, and intuitive touchscreen control, this heat pump delivers reliable, economical pool heating for years to come.

Key Reasons to Buy Today:

• ✅ Save 70-80% on heating costs vs. traditional heaters
• ✅ Extend your swimming season by months
• ✅ Premium titanium heat exchanger for saltwater compatibility
• ✅ Whisper-quiet operation for peaceful poolside enjoyment
• ✅ 2-year warranty + 5-year compressor coverage
• ✅ Free UK mainland delivery available

Add to basket now and start enjoying perfectly heated swimming all season long.