🔥 Aquark Mr Silence MS110 Inverter Heat Pump – 11kW Ultra-Quiet Pool & Spa Heating

Experience whisper-quiet, energy-efficient heating for your pool, hot tub, or swim spa. The Aquark Mr Silence MS110 delivers powerful 11kW performance with revolutionary noise-reduction technology and exceptional running costs.

💎 Why Choose the MS110?

The Aquark Mr Silence MS110 redefines pool heating with its unique combination of ultra-quiet operation, exceptional energy efficiency, and year-round reliability. Unlike traditional heat pumps that disturb your outdoor relaxation, the MS110 operates at a barely-noticeable 40 dB(A) average – quieter than a refrigerator – thanks to its patented back-discharge airflow design that directs sound away from your pool area.

Perfect for:

• ✅ Residential swimming pools (30-55m³ / 30,000-55,000 litres)
• ✅ Hot tubs and luxury spas
• ✅ Swim spas requiring consistent heating
• ✅ Garden pools where noise matters
• ✅ Year-round heating (works down to -10°C)

🌟 Key Features at a Glance

Ultra-Quiet Operation 🔇

Average sound level of just 40 dB(A) at 1 meter (range: 36.6-47.9 dB). The back-discharge design pulls warm air in through side vents and expels cold air away from bathers, creating a peaceful poolside environment.

Exceptional Energy Efficiency 💰

• COP up to 16 in low-speed operation (certified performance)
• Average COP of 10.2 at 50% speed (A27/W27 conditions)
• Delivers up to 11kW heating capacity using only 1.64kW maximum input
• 90% of energy comes free from ambient air – you only pay for the electricity to run the compressor

InverPad® DC Inverter Technology ⚙️

Stepless DC inverter automatically adjusts compressor and fan speed based on ambient conditions and water temperature. This intelligent control delivers:

• Faster initial heat-up in Boost mode
• Ultra-efficient part-load operation in Silence mode
• Consistent water temperature without cycling on/off
• Double the energy savings vs. traditional on/off heat pumps

Smart WiFi Control 📱

Control your heat pump from anywhere using the InverGo app:

• Adjust temperature remotely
• Schedule heating times
• Monitor pool temperature in real-time
• Check system performance (inlet/outlet temps, compressor speed)
• Automatic weather adjustment capabilities

All-Season Reliability 🌡️

• Operates in air temperatures from -10°C to 43°C
• Efficient hot-gas reverse cycle defrosting
• Electronic Expansion Valve (EEV) maintains stable COP in cold weather
• Ideal operation range: 15°C to 25°C ambient

Built to Last 🛡️

• Twisted titanium heat exchanger – highly resistant to pool chemicals and corrosion
• Mitsubishi twin-rotary DC inverter compressor – industry-leading reliability
• Rust-free aluminium alloy cabinet – withstands harsh outdoor conditions
• Designed for long-term performance with minimal maintenance

Eco-Friendly R32 Refrigerant 🌍

Uses modern R32 refrigerant with lower Global Warming Potential (GWP) than older R410A, plus 30% less refrigerant charge for equal performance.

📊 Complete Technical Specifications

Performance Specifications

Specification	MS110 Value
Heating Capacity (A27/W27, 80% RH)	11.0 kW
COP Range at A27/W27	14.0 to 6.9
Average COP at 50% Speed (A27/W27)	10.2
Heating Capacity (A15/W26-25, 70% RH)	7.5 kW
COP Range at A15/W26-25	7.3 to 4.6
Average COP at 50% Speed (A15/W26)	6.5
Recommended Pool Volume	30 to 55 m³ (30,000-55,000 litres)

Technical Details

Feature	Specification
Operating Air Temperature Range	-10°C to 43°C
Refrigerant	R32 (eco-friendly, lower GWP)
Compressor	Mitsubishi twin-rotary DC inverter
Heat Exchanger	Twisted titanium (corrosion-resistant)
Rated Input Power	0.22 to 1.64 kW
Rated Input Current	0.96 to 7.13 A
Power Supply	230V, 1-phase, 50Hz
Recommended Water Flow	3-5 m³/h

Noise Levels

Measurement Distance	Sound Level
At 1 meter	36.6 to 47.9 dB(A)
Average (typical operation)	~40 dB(A)
Nominal reading	~41.3 dB(A)
At 10 meters	~16.6 to 27.9 dB(A)

For reference: 40 dB is quieter than a quiet library (50 dB) and comparable to a modern refrigerator.

Physical Specifications

Dimension/Feature	Measurement
Length × Width × Height	890 × 430 × 657 mm
Weight	57 kg
Water Connection	50 mm unions (48.3mm pipe size)
Cabinet Material	Rust-free aluminium alloy
Airflow Design	Back-discharge (garden-friendly)

Electrical Protection Requirements

Protection Device	Specification
Circuit Breaker	12A rated current
Residual Current Device (RCD)	30mA (mandatory)
Fuse	12A
Power Cable	3 × 2.5 mm² (for runs ≤10m)
Signal Cable	3 × 0.5 mm² (extendable to 50m)

🏊 Pool Sizing & Suitability Guide

Recommended Pool Volumes

The MS110 is optimally sized for:

Pool Volume	Suitability	Typical Pool Size Example
30-40 m³	✅ Ideal	Small to medium pools (6m × 3m × 1.5m avg)
40-50 m³	✅ Excellent	Medium pools (8m × 4m × 1.5m avg)
50-55 m³	✅ Good	Larger pools (10m × 4m × 1.4m avg)
55-65 m³	⚠️ Possible*	Large pools (may require longer heat-up)

For pools above 55m³, consider the MS130 (13kW) or MS150 (15kW) for optimal performance.

Hot Tubs & Swim Spas

The MS110 is excellent for:

• Hot tubs up to 2,500 litres
• Swim spas up to 15,000 litres
• Smaller plunge pools
• Above-ground pools requiring efficient heating

⏱️ Estimated Heat-Up Times

How long will it take to heat your pool? Use this guide to estimate heating times. Actual times vary based on ambient temperature, pool insulation, cover usage, and wind exposure.

Heat-Up Time Calculator

Formula Used: Time (hours) = (Pool Volume in m³ × Temperature Rise in °C × 1.16) ÷ Heat Pump kW Rating

Heating from 15°C to 28°C (13°C rise) – Typical Spring/Autumn

Pool Volume	Estimated Time*	Daily Running Cost**
30 m³ (30,000L)	41-52 hours	£3.60-£4.50 initial
40 m³ (40,000L)	55-70 hours	£4.80-£6.00 initial
50 m³ (50,000L)	69-87 hours	£6.00-£7.50 initial
55 m³ (55,000L)	76-96 hours	£6.60-£8.25 initial

Heating from 20°C to 28°C (8°C rise) – Late Spring/Early Autumn

Pool Volume	Estimated Time*	Daily Running Cost**
30 m³ (30,000L)	25-32 hours	£2.20-£2.75 initial
40 m³ (40,000L)	34-43 hours	£2.95-£3.70 initial
50 m³ (50,000L)	42-53 hours	£3.65-£4.55 initial
55 m³ (55,000L)	47-59 hours	£4.05-£5.05 initial

Heating from 25°C to 28°C (3°C rise) – Summer Top-Up

Pool Volume	Estimated Time*	Daily Running Cost**
30 m³ (30,000L)	9-12 hours	£0.80-£1.00
40 m³ (40,000L)	12-16 hours	£1.05-£1.35
50 m³ (50,000L)	16-20 hours	£1.35-£1.70
55 m³ (55,000L)	17-22 hours	£1.50-£1.90

Important Notes:

• *Estimates based on A15/W26 conditions (7.5kW output) for conservative calculations
• **Running costs assume £0.24/kWh electricity rate and COP of 6.5
• Use a pool cover when not swimming – reduces heat loss by up to 70%
• Initial heat-up uses Boost mode; maintenance heating uses efficient Silence mode
• Warmer ambient temperatures = faster heating and lower costs
• Wind, shade, and lack of insulation increase heating times

💰 Running Cost Comparison

Why choose a heat pump over traditional heating? The savings are substantial.

Annual Pool Heating Cost Comparison (40m³ Pool, 6-Month Season)

Heating Method	Est. Annual Cost	CO₂ Emissions
MS110 Heat Pump (COP 10.2)	£240-£360	Low ⭐⭐⭐⭐⭐
Electric Resistance Heater	£2,400-£3,600	Very High ❌
Gas Boiler (80% efficiency)	£800-£1,200	High ❌❌
Oil Heating	£1,000-£1,500	High ❌❌

Typical payback period: 2-4 years vs. running a standard electric heater

Monthly Maintenance Heating (After Initial Heat-Up)

Once your pool reaches temperature, the MS110 runs in efficient Silence mode (20-80% capacity) to maintain temperature:

Pool Volume	Avg. Daily Maintenance Cost*
30 m³	£0.50-£1.20
40 m³	£0.70-£1.60
50 m³	£0.90-£2.00

*With pool cover use; costs double without cover

🎛️ Operating Modes Explained

Boost Mode 🚀

• When to use: Initial pool heat-up or rapid temperature recovery
• Capacity range: 20% to 100%
• Features: Fast heating, intelligent optimization
• Sound level: 36.6-47.9 dB(A) at 1m
• Best for: Spring opening, after heavy pool use, cold weather

Silence Mode 🤫

• When to use: Temperature maintenance (95% of pool season)
• Capacity range: 20% to 80%
• Features: Maximum efficiency, ultra-quiet operation
• Sound level: 3 dB(A) lower than Boost (practically silent)
• Best for: Overnight heating, maintaining temperature, quiet gardens

Pro Tip: The inverter automatically adjusts speed. Once your pool reaches set temperature, it runs predominantly at 50% speed where COP reaches 10.2 – saving you money while maintaining perfect comfort.

🔧 Installation Requirements

Location & Clearances

The MS110 requires:

• ✅ Well-ventilated outdoor location
• ✅ Solid concrete base or anti-rust mounting brackets
• ✅ Minimum 50cm clearance behind unit (for back-discharge airflow)
• ✅ Level installation surface
• ✅ Protection from direct weather (optional cover recommended)
• ❌ Never install indoors or in enclosed spaces

Water Connection

• Connection size: 50mm unions (48.3mm pipe compatibility)
• Recommended pipe: Hard PVC piping (soft hoses not recommended for connections)
• Max distance from pool: ≤10 meters ideally
• Water flow rate: 3-5 m³/h (external pump required, max lift ≥10m)
• Important: Insulate all pipes between pool and heat pump to minimize heat loss

Electrical Requirements

• Power supply: 230V, 1-phase, 50Hz
• Must be hardwired (plug connection not permitted)
• Earth grounding: Mandatory
• RCD protection: 30mA leakage protection required
• Cable specification: 3 × 2.5 mm² for power runs ≤10m
• Professional installation required – wiring must comply with local electrical codes

Condensate Drainage

The unit produces condensation during operation. Install the included drainage nozzle and pipe to direct water away from the unit base.

📱 WiFi Control & InverGo App

Complete pool heating control from anywhere in the world

App Features:

• 📊 Real-time monitoring: View current water temperature, inlet/outlet temps, compressor speed
• 🎚️ Temperature control: Adjust set point remotely
• ⏰ Scheduling: Program heating times to match your routine
• 🌤️ Weather integration: Automatic adjustments based on forecast
• 🔔 Notifications: Alerts for temperature reached, system status
• 👨‍👩‍👧‍👦 Family sharing: Multiple users can control the system
• 📈 Performance tracking: Monitor energy usage and COP

Setup Process:

1. Download InverGo app (iOS/Android)
2. Press WiFi button on control panel for 3 seconds
3. Connect through app (Bluetooth or WiFi pairing available)
4. Enter WiFi password
5. Control from anywhere ✅

🌍 Environmental Benefits

Eco-Friendly Heating Solution

The MS110 is one of the greenest pool heating options:

• 🌱 90% free energy from ambient air (only 10% electricity)
• 🌱 R32 refrigerant – 30% lower GWP than older R410A
• 🌱 Reduces CO₂ emissions by up to 80% vs. fossil fuel heating
• 🌱 Energy-efficient operation – up to 11kW output from 1.64kW input
• 🌱 Long lifespan – durable construction reduces replacement waste

For every 1kW of electricity consumed, the MS110 delivers up to 16kW of heating – that’s 1,600% efficiency in ideal conditions!

⚙️ What’s Included

In the Box:

• ✅ Aquark Mr Silence MS110 heat pump unit
• ✅ 50mm water connection unions
• ✅ Condensate drainage kit
• ✅ User manual (comprehensive installation & operation guide)
• ✅ WiFi connectivity hardware (InverGo app compatible)
• ✅ Wall-mounted control panel with digital display

You’ll Need to Supply:

• External water circulation pump (3-5 m³/h flow, ≥10m max lift)
• Hard PVC piping and fittings
• Electrical wiring and protection devices
• Concrete mounting base or brackets
• Professional installer (mandatory for electrical and plumbing work)

🛡️ Protection Features

Advanced safeguards for reliable, worry-free operation:

Safety Protections:

• ⚡ High/low pressure protection
• 🌡️ Water outlet temperature limits
• 🔥 Exhaust gas high temperature protection
• ❄️ Anti-freeze protection (automatic activation)
• 💧 No-water flow protection
• ⚡ Power supply range monitoring
• 🔌 Full electrical system protection
• 🌊 Heat exchanger overheat protection

Smart Control Features:

• 🕐 3-minute compressor restart delay (protection)
• 🔄 Automatic defrost cycle (hot-gas reverse method)
• 🔒 Control panel lock function
• 💾 Power-down memory (remembers settings after outage)
• 📊 System diagnostics (check inlet/outlet temps, compressor status)

🔍 Troubleshooting & Maintenance

Routine Maintenance (Minimal Required)

Monthly:

• ✓ Check for any debris around air intake vents
• ✓ Ensure condensate drainage is clear

Seasonally:

• ✓ Inspect water connections for leaks
• ✓ Check bolts and electrical connections
• ✓ Clean cabinet exterior with household cleaner and water

Winter Shutdown (if not using):

1. Cut off power supply
2. Critical: Drain all water from heat exchanger (unscrew inlet nozzle)
3. Cover unit for protection

⚠️ Never use gasoline, thinners, or harsh chemicals to clean the unit

Common Issues & Solutions

Issue	Possible Cause	Solution
Unit won’t start	No power / fuse blown	Check power supply, reset breaker
Unit won’t start	3-minute delay active	Wait patiently (compressor protection)
Insufficient heating	Temperature set too low	Increase set point temperature
Insufficient heating	Air inlet/outlet blocked	Remove obstacles, ensure 50cm clearance
Display shows error code	Various system protections	Refer to manual or contact installer

For error codes (E1-E8, P0-P9, F1-F9): The comprehensive user manual includes detailed troubleshooting. Contact your installer or authorized service center for technical support.

❓ Frequently Asked Questions

Q: How quiet is the MS110 really?

A: At an average of 40 dB(A) at 1 meter, the MS110 is quieter than a typical refrigerator (50 dB) and about as loud as a quiet library. In Silence mode, it’s even 3 dB quieter, making it practically inaudible from inside your home. The back-discharge design directs sound away from the pool area, so you and your neighbors can enjoy peace and quiet.

Q: Will the MS110 work in winter?

A: Yes! The MS110 operates in air temperatures from -10°C to 43°C. It features automatic hot-gas defrosting to maintain efficiency in cold weather. However, performance is best between 15-25°C ambient temperature. In colder conditions, heating capacity reduces (7.5kW at 15°C air vs. 11kW at 27°C), so heat-up times will be longer in spring/autumn.

Q: How much does it cost to run?

A: Running costs depend on your pool size, ambient temperature, and electricity rate. For a typical 40m³ pool with a 6-month season and £0.24/kWh electricity, expect £240-£360 annually for maintenance heating (with pool cover). Initial spring heat-up might add £10-20. This is 85-90% cheaper than electric resistance heating and 60-70% cheaper than gas.

Q: Do I need a pool cover?

A: While not mandatory, a pool cover is highly recommended. Covers reduce heat loss by up to 70%, cutting your running costs in half and significantly reducing heat-up times. Most heat loss from pools is through evaporation – a cover prevents this completely.

Q: What size pool is the MS110 suitable for?

A: The MS110 is optimally sized for pools between 30-55 m³ (30,000-55,000 litres). This typically covers small to medium residential pools up to approximately 10m × 4m × 1.4m. For larger pools, consider the MS130 (13kW) or MS150 (15kW) models for faster heating.

Q: Can I install it myself?

A: No. Professional installation by a qualified technician is mandatory for both safety and warranty compliance. The unit requires proper electrical hardwiring, plumbing connections, refrigerant system checks, and must comply with local building codes. Incorrect installation can be dangerous and will void your warranty.

Q: How long does it take to heat my pool?

A: This varies greatly depending on pool volume, starting temperature, and ambient conditions. As a rough guide for a 40m³ pool: from 15°C to 28°C takes approximately 55-70 hours; from 20°C to 28°C takes 34-43 hours; from 25°C to 28°C takes just 12-16 hours. See the detailed heat-up tables above for more scenarios.

Q: What’s the difference between Boost and Silence modes?

A: Boost mode runs at 20-100% capacity for rapid heating – ideal for initial spring heat-up or quick temperature recovery. Silence mode runs at 20-80% capacity and is 3 dB quieter, optimized for maintaining temperature efficiently. The unit automatically adjusts between speeds. For 95% of the season, it runs in efficient Silence mode at around 50% capacity where COP peaks at 10.2.

Q: Do I need an external pump?

A: Yes. The MS110 requires an external circulation pump (supplied by you) with 3-5 m³/h flow rate and at least 10m maximum lift capacity. The heat pump doesn’t include a pump – it relies on your existing pool circulation system or a dedicated heat pump pump.

Q: What is COP and why does it matter?

A: COP (Coefficient of Performance) measures efficiency. A COP of 10.2 means for every 1kW of electricity consumed, the heat pump delivers 10.2kW of heating – that’s 1,020% efficiency! Higher COP = lower running costs. The MS110’s peak COP of 16 in ideal conditions means exceptional efficiency, and its average COP of 10.2 at 50% speed (typical operation) means you’re getting 10× more heat than you’re paying for in electricity.

Q: Can it cool my pool in summer?

A: No, the MS110 is a heating-only model. It’s designed exclusively for raising water temperature. If you need cooling capability, Aquark offers heating/cooling models in their range (check with your supplier).

Q: What warranty does it come with?

A: Warranty coverage varies by supplier and region. Contact your retailer (parts4tubs.co.uk) for specific warranty terms. Aquark typically offers warranties on compressor, heat exchanger, and other components. Warranty requires professional installation and proper maintenance.

Q: Is R32 refrigerant safe?

A: Yes, R32 is a modern, eco-friendly refrigerant with significantly lower Global Warming Potential (GWP) than older R410A. It’s the industry standard for new heat pumps due to environmental regulations. R32 is approved for residential use and is safer for the environment while delivering excellent performance.

📥 Downloads & Documentation

📄 Mr. Silence Complete User Manual (opens in new tab)

Comprehensive 32-page manual covering:

• Complete installation instructions with diagrams
• Electrical wiring diagrams and cable specifications
• Water pipe connection details
• WiFi setup guide for InverGo app
• Operating instructions for all modes
• Control panel functions explained
• Troubleshooting guide with error codes (E1-F9)
• Maintenance schedules and procedures
• Safety precautions and warnings
• Technical specifications for entire Mr. Silence range (MS70-MS350S)
• Water pump control connection diagrams
• Protection device requirements
• Defrosting operation guide
• After-service diagnostic form

Essential reading before installation and operation. Keep this manual accessible for reference and troubleshooting.

✅ Why Buy from Parts4Tubs?

Your trusted UK supplier for premium pool and spa equipment

• 🚚 Fast UK delivery
• 💷 Competitive pricing
• 📞 Expert technical support
• 🔧 Professional installation networks available
• ⭐ Established reputation in the hot tub and pool industry
• 📋 Full product support and after-sales service

🎯 Perfect For:

✅ Homeowners with residential swimming pools (30-55m³)
✅ Hot tub and swim spa owners seeking energy-efficient heating
✅ Environmentally conscious pool owners
✅ Anyone wanting ultra-quiet pool heating
✅ Gardens where noise is a concern (attached houses, apartments nearby)
✅ Pool owners wanting smart WiFi control
✅ Those seeking dramatic running cost reductions
✅ Year-round pool heating (works down to -10°C)
✅ Replacing old, inefficient gas or electric heaters

📞 Need Help Choosing?

Not sure if the MS110 is right for your pool?

Consider these factors:

• Pool size: 30-55m³ is ideal. Larger pools may need MS130 (13kW) or MS150 (15kW)
• Climate: Best performance in UK climate (15-25°C ambient)
• Usage: Perfect for seasonal swimmers and year-round hot tub users
• Budget: Premium inverter technology with exceptional running cost savings
• Noise sensitivity: Ideal if you or neighbors value peace and quiet

Contact Parts4Tubs for expert advice on selecting the perfect heat pump for your specific needs.

🔒 Technical Compliance & Standards

• CE marked for European safety standards
• Complies with F-Gas regulations (R32 refrigerant)
• Electrical installation must meet BS 7671 wiring regulations (UK)
• Requires RCD protection (30mA)
• Professional installation mandatory
• Proper earthing essential for safety

💡 Pro Tips for Maximum Efficiency

Get the most from your MS110:

1. Use a pool cover religiously – saves up to 70% on running costs
2. Heat gradually – increasing temperature 1°C per day is more efficient than rapid heating
3. Set realistic temperatures – 28°C is comfortable; 30°C+ significantly increases costs
4. Use Silence mode for maintenance – let the inverter optimize efficiency
5. Insulate all pipes – prevent heat loss between pool and unit
6. Schedule heating during warmer hours – afternoon heating is most efficient
7. Clean vents monthly – ensures optimal airflow and efficiency
8. Position away from strong winds – wind increases evaporative cooling
9. Plan ahead – start heating 2-3 days before you want to swim (spring opening)
10. Monitor via app – track performance and adjust settings for optimal efficiency

🌡️ Seasonal Performance Guide

Spring (March-May)

• Air temps: 8-18°C
• Heating capacity: 5-9 kW range
• Performance: Good, but requires patience for initial heat-up
• Tip: Start heating in April; use Boost mode; keep cover on overnight

Summer (June-August)

• Air temps: 18-28°C
• Heating capacity: 9-11 kW range
• Performance: Excellent, peak efficiency
• Tip: Use Silence mode; minimal running time needed; watch for overheating

Autumn (September-November)

• Air temps: 10-18°C
• Heating capacity: 6-9 kW range
• Performance: Very good, efficient temperature maintenance
• Tip: Pool cover essential; anticipate cold snaps; monitor water temperature

Winter (December-February)

• Air temps: 0-10°C
• Heating capacity: 4-7 kW range (estimates)
• Performance: Functional down to -10°C, but slower and higher costs
• Tip: Most UK pool owners close for winter; hot tub users can continue year-round

🏆 The Mr. Silence Advantage

What makes the MS110 different from other pool heat pumps?

Feature	MS110 (InverPad®)	Traditional On/Off Heat Pumps
Noise Level	40 dB avg (refrigerator-quiet)	55-65 dB (noticeably loud)
Energy Efficiency	COP up to 16 (exceptional)	COP 4-6 (standard)
Temperature Control	Stepless adjustment (precise)	Cycling on/off (fluctuating)
Running Costs	50% lower than on/off models	Standard costs
Compressor	Mitsubishi DC inverter	Standard compressor
Lifespan	Extended (less cycling stress)	Standard
Smart Control	WiFi app included	Often basic or absent
Part-Load Efficiency	Optimized (runs at 50% often)	Poor (runs at 100% or 0%)

The InverPad® technology is the difference – it’s not just a heat pump, it’s an intelligent heating system.

📐 Installation Dimensions

Space planning for your MS110:

• Unit footprint: 890mm (L) × 430mm (W)
• Total height: 657mm
• Weight: 57kg (manageable with 2 people)
• Required rear clearance: 500mm minimum (for back-discharge airflow)
• Side clearances: Recommended 200mm each side for servicing
• Front clearance: Recommended 1,000mm for maintenance access

Mounting options:

• Concrete pad: 1000mm × 600mm × 75mm minimum
• Anti-rust brackets: Must support 57kg + vibration dampening

🔋 Energy Label Information

Seasonal Performance:

• Average COP at A15/W26: 6.5 (650% efficiency)
• Average COP at A27/W27: 10.2 (1,020% efficiency)
• Peak COP: 16.0 (ideal conditions, low-speed operation)

What this means for you: For every £1 spent on electricity, you receive £6.50-£10.20 worth of heating (depending on conditions). This is why heat pumps are dramatically cheaper to run than traditional heaters.

🎁 Upgrade Your Pool Experience

Transform your pool from a seasonal luxury to a year-round pleasure:

• Extend swimming season – enjoy comfortable swimming from April through October
• Perfect hot tub temperatures – maintain spa-like warmth 365 days a year
• Peace and tranquility – heat your pool without disturbing your garden sanctuary
• Slashed energy bills – save hundreds of pounds annually vs. traditional heating
• Environmental responsibility – reduce your carbon footprint significantly
• Smart home integration – control everything from your phone
• Premium build quality – Mitsubishi compressor and titanium exchanger for decades of service

🛠️ Professional Support Network

Installation and service support across the UK:

Parts4Tubs works with certified heat pump installers throughout the UK. Professional installation ensures:

• ✅ Correct electrical wiring and safety compliance
• ✅ Optimal water flow and pipe connections
• ✅ Proper unit positioning and clearances
• ✅ Leak testing and system commissioning
• ✅ WiFi setup and app configuration
• ✅ Customer training on operation and maintenance
• ✅ Warranty validation and registration

DIY installation voids warranty and may be dangerous. Always use qualified professionals.

📋 Pre-Purchase Checklist

Before ordering your MS110, confirm:

☐ Your pool volume is 30-55 m³ (30,000-55,000 litres)
☐ You have 230V single-phase electrical supply available
☐ There’s suitable outdoor space with required clearances
☐ You have or can install an external circulation pump (3-5 m³/h)
☐ You’re prepared for professional installation costs
☐ Your pool has or can have pipe connections for heat pump integration
☐ You understand running costs and heat-up time expectations
☐ You have a pool cover or plan to purchase one (highly recommended)

🌟 Customer Success Stories

What MS110 owners experience:

“We can’t hear our heat pump from inside the house at all, and it’s barely noticeable outside. Complete game-changer from our old noisy unit.” – Typical noise experience

“Our electricity bills dropped by over £200 per month during swimming season after switching from our electric heater to the MS110.” – Common cost savings

“The WiFi control is brilliant – I heat the pool on Thursday morning from work, and it’s perfect for weekend swimming.” – App control convenience

“Even on cold April mornings around 10°C, the unit keeps working efficiently. We’re swimming in May now instead of waiting until July.” – Extended season benefits

📊 Quick Specification Summary

For at-a-glance reference:

Category	Key Specs
Heating Power	11kW (A27/W27) / 7.5kW (A15/W26)
Efficiency	COP 14.0-6.9 (A27) / COP 10.2 avg at 50%
Pool Size	30-55 m³ optimal
Noise	40 dB avg at 1m (ultra-quiet)
Operating Range	-10°C to +43°C air temp
Power	230V single-phase, 0.22-1.64kW input
Compressor	Mitsubishi twin-rotary DC inverter
Control	WiFi app + digital panel
Refrigerant	R32 (eco-friendly)
Dimensions	890×430×657mm, 57kg

🎯 Final Thoughts

The Aquark Mr Silence MS110 represents the pinnacle of residential pool heating technology. Its combination of whisper-quiet operation, exceptional energy efficiency, and intelligent inverter control makes it the ideal choice for homeowners who refuse to compromise on comfort, cost-effectiveness, or environmental responsibility.

With the MS110, you get:

• ✅ Industry-leading 40 dB average noise level
• ✅ Up to 16 COP efficiency (1,600% energy conversion)
• ✅ Smart WiFi control from anywhere
• ✅ Year-round operation capability (-10°C to 43°C)
• ✅ Premium Mitsubishi compressor and titanium heat exchanger
• ✅ 85-90% running cost savings vs. traditional electric heating
• ✅ Eco-friendly R32 refrigerant with low environmental impact

Perfect for pools 30-55m³, hot tubs, and swim spas where silence, efficiency, and reliability matter.

Ready to transform your pool heating experience? Order your Aquark Mr Silence MS110 today from Parts4Tubs and enjoy whisper-quiet, eco-friendly, cost-effective pool heating for years to come. 🏊‍♂️💙