♨️ Aqua-Flo by Gecko XP2e Spa Pump – 3.0HP 1-Speed

Maximum power single-speed performance for demanding high-flow spa jet systems

💧 Product Overview

The Aqua-Flo by Gecko XP2e 3.0HP Single-Speed Pump is the powerhouse of the XP2e range, engineered for high-flow spa applications where maximum jet performance is essential. Delivering an impressive 3.0 HP (2.2 kW) of motor power at 2,850 RPM, this pump produces flow rates up to 680 L/min, making it capable of driving multiple hydrotherapy jets simultaneously.

Built around a robust 56-frame motor with Class F thermally protected insulation, the XP2e 3.0HP features a centre suction with side discharge configuration and a rotatable wet end for versatile installation options. The larger frame size accommodates the higher power output while maintaining the proven Aqua-Flo reliability that spa manufacturers depend upon.

With 2-inch suction and discharge ports providing excellent water throughput, this pump is the ideal choice for larger spas, swim spas, or any installation requiring serious jet power. The pump is supplied without a power cord, allowing installers to use existing 3-core cabling for straightforward replacement. Operating at 230V / 50Hz with a 10.3 A current draw, the XP2e 3.0HP delivers the ultimate in single-speed jet pump performance.

✨ Key Features

✅ 3.0HP Single-Speed Motor – Delivers 2.2 kW of maximum jet power at 2,850 RPM

✅ 56-Frame Construction – Larger motor frame for high-power applications

✅ 680 L/min Flow Rate – Exceptional throughput for multiple jet operation

✅ Class F Thermal Protection – Motor insulation rated for demanding operation

✅ Centre Suction / Side Discharge – Efficient hydraulic design for optimal flow

✅ Rotatable Wet End – Adjustable discharge orientation for flexible plumbing configurations

✅ 2″ x 2″ Plumbing – Standard 2-inch suction and discharge ports

✅ Multi-Jet Capability – Powers multiple jets per pump for intense hydrotherapy

✅ Direct XP2 Replacement – Compatible with older XP2 model installations

✅ Proven Reliability – Aqua-Flo by Gecko quality trusted worldwide

🔧 Technical Specifications

Specification	Value
Pump Type	Single-Speed Massage Pump
Brand	Aqua-Flo by Gecko
Model	XP2e
Motor Power	3.0 HP / 2.2 kW
Speed Settings	Single Speed
Amperage	10.3 A
Motor Speed	2,850 RPM
Maximum Flow Rate	680 L/min
Voltage	230 V
Frequency	50 Hz
Frame Type	56 Frame
Motor Insulation	Class F Thermally Protected
Plumbing Size	2″ x 2″
Suction Port	2 inch (Centre)
Discharge Port	2 inch (Side)
Wet End	Rotatable
Length	427 mm
Width	203 mm
Height	241 mm
Electrical Connection	No cord supplied (use existing 3-core cable)

⚡ Electrical Requirements

Electrical Specification	Requirement
Supply Voltage	230 V
Frequency	50 Hz
Phase	Single Phase
Full Load Amps	10.3 A
Motor Insulation	Class F
Thermal Protection	Yes
Connection Type	Hardwired (3-core cable)
Power Cord	Not supplied

⚠️ IMPORTANT:

All electrical work must be carried out by a qualified electrician in accordance with UK wiring regulations (BS 7671). Hot tubs require RCD protection (30mA). This pump draws 10.3 A – verify your spa pack and circuit can supply this current before installation. The pump is supplied without a power cord; existing 3-core cabling can be reused.

🔄 Compatibility Guide

Frame Dimensions:

Frame Type	Description
48 Frame	Compact spa pump standard (130mm diagonal bolt pattern)
56 Frame	Larger motor frame (147mm diagonal bolt pattern)

This Pump:

📍 Frame: 56 Frame (larger than 48-frame models)

📍 Plumbing: 2″ x 2″

📍 Suction: 2 inch Centre

📍 Discharge: 2 inch Side

📍 Wet End: Rotatable for flexible installation

📍 Dimensions: 427 × 203 × 241 mm

Replacement For:

This XP2e model is a direct replacement for older XP2 pumps in the 3.0HP class. Verify frame size (56 frame) and plumbing connections match your existing installation.

Compatible With:

The Aqua-Flo XP2e 3.0HP is designed for spa systems requiring high-power single-speed jet operation with 2-inch plumbing and 56-frame mounting. Suitable for various spa brands requiring this specification.

🔌 Installation Requirements

Mounting:

Requirement	Specification
Mounting Position	Horizontal
Frame Type	56 Frame
Base	Solid, level, vibration-dampening surface
Ventilation	Adequate clearance for motor cooling
Access	Sufficient space for plumbing and electrical connections

Plumbing:

Connection	Size	Position
Suction Port	2 inch	Centre
Discharge Port	2 inch	Side

Electrical Connection:

Requirement	Specification
Cable Type	3-core (not supplied)
Recommended Cable Size	2.5 mm² minimum
Circuit Protection	16 A MCB recommended

Installation Notes:

⚠️ Pump must be installed below water level (flooded suction) to ensure proper priming

⚠️ Never run pump dry – causes immediate seal damage and motor overheating

⚠️ Wet end can be rotated to adjust discharge direction for your plumbing layout

⚠️ Ensure proper bonding to earth as per BS 7671 regulations

⚠️ Power cord not supplied – use existing 3-core cable or install new appropriate cabling

⚠️ 56-frame pumps are physically larger than 48-frame – verify space availability

🛠️ Maintenance Guide

Routine Maintenance:

Task	Frequency	Notes
Check for leaks	Monthly	Inspect around seal plate and union connections
Inspect unions	Monthly	Tighten if any weeping is detected
Check motor ventilation	Quarterly	Ensure motor vents are not obstructed
Inspect mounting bolts	Quarterly	Tighten if vibration has loosened them
Verify amperage	Annually	Should read approximately 10.3 A under normal load
Clean strainer basket	As needed	Remove debris from filtration system

Warning Signs – Replace Pump If:

• Unusual noise such as grinding, screeching, or humming
• Water leaking from the seal plate area
• Motor repeatedly trips the circuit breaker
• Noticeably reduced water flow to jets
• Motor overheating or cutting out on thermal protection
• Excessive vibration during operation

Seal Replacement:

📍 Contact Parts4Tubs for compatible seal kits for the Aqua-Flo XP2e range

⚠️ Replace seal at first sign of leakage to prevent motor damage

⚙️ Ideal Applications

Application	Suitability	Notes
♨️ Hot tub jet pump	✅ Yes	3.0 HP ideal for multiple jet configurations
♨️ Large spa systems	✅ Yes	680 L/min supports demanding installations
🛁 Swim spa jets	✅ Yes	High flow suitable for swim spa jet systems
🔄 Circulation pump	❌ No	Use dedicated circ pump for 24/7 filtration

❓ Frequently Asked Questions

Q: What horsepower is this pump?

A: This is a 3.0 HP (2.2 kW) single-speed massage pump running at 2,850 RPM – the most powerful in the XP2e range.

Q: What flow rate does this pump deliver?

A: Up to 680 L/min, making it capable of powering multiple hydrotherapy jets simultaneously.

Q: Will this fit my hot tub?

A: This pump has a 56-frame motor (larger than 48-frame) with 2-inch suction and discharge ports. Check your existing pump’s frame size and plumbing connections for compatibility.

Q: What voltage does this pump require?

A: 230V / 50Hz single phase. All electrical installation must be carried out by a qualified electrician to BS 7671 standards.

Q: Does this pump come with a power cord?

A: No, the pump is supplied without a power cord. This allows installers to reuse existing 3-core cabling or install new appropriate cabling as required.

Q: What size are the plumbing connections?

A: 2 inch on both suction (centre) and discharge (side) ports.

Q: Can I rotate the wet end?

A: Yes, the wet end is rotatable to allow the discharge port to be positioned to suit your plumbing configuration.

Q: What are the dimensions?

A: Length: 427 mm, Width: 203 mm, Height: 241 mm. Note this is physically larger than 48-frame pumps due to the 56-frame motor.

Q: Is this a replacement for older XP2 pumps?

A: Yes, the XP2e is designed as a direct replacement for older XP2 models in the same power class.

Q: How do I know if my pump needs replacing?

A: Common signs include unusual noises, water leaking from the seal area, reduced jet power, or the motor tripping the breaker repeatedly.

🏆 Why Choose the Aqua-Flo XP2e 3.0HP

✅ Maximum Power – 3.0 HP delivers the strongest jet performance in the range

✅ High Flow Rate – 680 L/min supports multiple jets simultaneously

✅ Trusted Brand – Aqua-Flo by Gecko quality recognised worldwide

✅ 56-Frame Motor – Robust construction for demanding applications

✅ Class F Insulation – Thermally protected for reliable operation

✅ Flexible Installation – Rotatable wet end adapts to your plumbing

✅ Direct Replacement – Compatible with older XP2 installations

🤝 Why Buy From Parts4Tubs

✅ UK-based company with local expert support

✅ Fast UK delivery – same day dispatch on orders placed before 2pm

✅ Expert advice from dedicated spa specialists

✅ Competitive pricing on quality spa parts

✅ Full warranty support

✅ Easy returns within 30 days

✅ Replacement seals and parts available

✅ Genuine Aqua-Flo by Gecko products

💫 Summary

The Aqua-Flo by Gecko XP2e 3.0HP Single-Speed Spa Pump is the ultimate choice for high-flow spa applications demanding maximum jet power. Delivering 3.0 HP (2.2 kW) at 2,850 RPM with flow rates up to 680 L/min, this 56-frame pump powers multiple hydrotherapy jets with ease. Class F thermal protection, rotatable wet end, and 2-inch plumbing connections ensure reliable performance and flexible installation. As a direct replacement for older XP2 models, the XP2e maintains trusted Aqua-Flo quality in a robust package. For spas, swim spas, or any installation requiring serious jet performance, the XP2e 3.0HP delivers exceptional results.