Gecko 2 HP 1-Speed Water Pump: Powering Your Perfect Hot Tub Experience

Are you in search of a reliable, high-performance water pump to keep your hot tub running at its best? Look no further! I’m excited to offer you the Gecko 2 HP 1-Speed Water Pump, a robust and efficient solution designed to elevate your spa experience.

Product Highlights

• Consistent Power: With 2 HP, this pump delivers strong, reliable water flow for your hot tub.
• Energy Efficient: Operating at 230V and 50Hz, it strikes the perfect balance between power and energy conservation.
• Versatile Compatibility: Suitable for a wide range of spa brands and models, making it an ideal replacement part.
• Easy Installation: Comes with 2″ unions for a straightforward replacement process.

Technical Specifications

• Manufacturer: Gecko
• Type: Water pump / Jet pump
• Power Reference: 2 HP 1 speed
• Voltage: 230V
• Frequency: 50Hz
• Motor HP: 2 (single speed)
• Amperage: 9A
• RPM: 2840
• Plumbing Connections: 2 x 2 inch unions (included)
• Electrical Connections: Cordless design (3-pin cord available separately)
• Dimensions: 379mm (L) x 232mm (H) x 202mm (D)

Tech-Sheet

• Tech-Sheet

Versatility and Compatibility

I’ve carefully selected this Gecko 2 HP 1-Speed Water Pump for its incredible versatility. It’s designed to seamlessly replace pumps from various manufacturers, including:

• Waterway
• GE
• Emerson
• A.O Smith

In most cases, the included unions will wind straight on, making your replacement process quick and hassle-free.

Reliable Single-Speed Operation

Operating at a consistent 2840 RPM, this pump provides dependable performance for both circulation and jet action. Its single-speed design ensures straightforward operation and maintenance, making it an excellent choice for a wide variety of hot tub setups.

Adaptability

While this pump features a distinctive ribbed body design, it can often replace pumps with smooth bodies, provided the ratings match. The wet end of the pump is typically consistent across different models, even if the motor manufacturer varies. This adaptability means you’re more likely to find a perfect fit for your system.

Personal Support

I understand that finding the ideal replacement pump can be challenging. That’s why I’m here to help! If you’re unsure about compatibility or have any questions, please don’t hesitate to reach out. Just give me a call or send an email, and I’ll be happy to advise if this pump can be adapted to work with your specific system.

Why Choose This Pump?

1. Reliability: Gecko is a trusted name in the hot tub industry, known for producing durable, long-lasting components.
2. Performance: With 2 HP and 2840 RPM, this pump ensures strong water circulation for a satisfying spa experience.
3. Efficiency: The single-speed design offers a good balance of performance and energy consumption.
4. Flexibility: Its versatile design makes it an excellent replacement option for various hot tub models and brands.

Installation Note

This pump comes without a cord, giving you the flexibility to either use your existing cable or order a separate 3-pin cord if needed. This feature allows for easier integration with your current setup. The package includes 2 x 2″ unions, saving you the hassle and extra cost of purchasing them separately.

My Promise to You

As an individual seller specializing in hot tub spare parts, I’ve carefully chosen this pump to offer you a solution that can overcome most obstacles. I’m committed to helping you find the right fit for your hot tub, and I’m always here to provide personalized advice and support.

Upgrade your hot tub experience today with the Gecko 2 HP 1-Speed Water Pump – reliable power for your spa’s circulation system!

The hot tub industry doesnt make it easy for you when you are trying to match up the size of the unions (the part that screws your pipe work onto the pumps) Below you can see the physical sizes of the collars, and how they relate to the actual union size you need. So a measurement of 2.5", edge to edge on the collar of the pump is actually a 1.5" union - confusing - absolutely! If you are not sure, give me a shout!

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.
2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)
3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.
4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.
5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.
6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.
7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.
8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.
9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.
10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.
11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.
12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.
13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.
14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.
15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.
2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.
3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.
4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.
5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.