Upgrade Your Spa Experience with the Aqua-flo by Gecko XP2e 2.0HP 2-Speed Pump

Are you looking to enhance your hot tub’s performance and take your relaxation to the next level? Let me introduce you to the Aqua-flo by Gecko XP2e 2.0HP 2-speed pump, a game-changer in the world of spa equipment.

Unmatched Power and Efficiency

The heart of this pump is its robust 2.0 horsepower motor, engineered to deliver exceptional performance. With 2″ x 2″ connections, this powerhouse ensures efficient water circulation, rapid heating, and an invigorating massage experience that will leave you feeling rejuvenated.

Versatility at Its Finest

One of the standout features of the Aqua-flo by Gecko XP2e is its universal compatibility. I’ve found that this pump seamlessly replaces a wide range of leading brands, including Waterway, Vico, Sta-Rite, GE, Emerson, and A.O Smith. This versatility makes it an excellent choice for most hot tub owners looking to upgrade or replace their existing pump.

Built to Last

In my experience, durability is crucial when it comes to hot tub components. The Aqua-flo by Gecko XP2e is constructed with high-quality materials designed to withstand the demanding hot tub environment. This robust build ensures longevity, giving you peace of mind and consistent performance for years to come.

Easy Installation

I understand that replacing a pump can seem daunting, but the Aqua-flo by Gecko XP2e is designed with user-friendly installation in mind. Its familiar footprint and connections make it a straightforward replacement for many existing pumps, saving you time and potential headaches.

Key Benefits

Efficient Heating

The low-speed setting of this pump is perfect for maintaining your desired water temperature while minimizing energy consumption. You’ll enjoy consistent warmth without the worry of skyrocketing energy bills.

Powerful Massage

Switch to the high-speed setting, and you’ll unlock the full potential of your spa jets. The increased water flow provides a deep, therapeutic massage that can help soothe sore muscles and melt away stress.

Quiet Operation

Despite its power, this pump operates quietly, especially on the low-speed setting. You can enjoy your spa’s tranquil atmosphere without disruptive noise.

Technical Specifications

To help you make an informed decision, here’s a detailed breakdown of the Aqua-flo by Gecko XP2e’s specifications:

Specification	Value
Model	Aqua-flo by Gecko XP2e
Horsepower	2.0 HP
Speeds	2 (Low/High)
Voltage	230V
Frequency	50 Hz
Amps (Low/High Speed)	1.8 / 9
RPM (Low/High Speed)	1450 / 2850
Plumbing Connections	2″ x 2″ unions (sold separately)
Electrical Connections	1 x 4 core JJ lead
Dimensions (L x H x D)	379 mm x 230 mm x 203 mm
Compatibility	Gecko XP2 R0 3.6MBHP pump (06620079-1040)

Tech Sheet

• Tech-Sheet

A Perfect Fit for Your Spa

Finding the right replacement pump can be challenging, but I’m here to help. The Aqua-flo by Gecko XP2e 2.0HP 2-speed pump is designed to be a versatile solution for a wide range of hot tub models. If you’re unsure about compatibility or have any questions, don’t hesitate to reach out. I’m committed to helping you find the perfect pump to revitalize your spa experience.

Elevate Your Spa Experience Today

The Aqua-flo by Gecko XP2e 2.0HP 2-speed pump is more than just a replacement part – it’s an upgrade that will transform your hot tub experience. With its powerful performance, energy efficiency, and durable construction, this pump is an investment in your relaxation and well-being.

Don’t settle for a subpar spa experience. Upgrade to the Aqua-flo by Gecko XP2e and rediscover the joy of your hot tub with enhanced circulation, more effective heating, and massaging jets that will leave you feeling refreshed and rejuvenated.

The hot tub indistry doesnt make it easy for you when you are trying to match up the size of the unions (the part that screws your pipe work onto the pumps) Below you can see the physical sizes of the collars, and how they relate to the actual union size you need. So a measurement of 2.5", edge to edge on the collar of the pump is actually a 1.5" union - confusing - absolutely! If you are not sure, give me a shout!

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.
2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)
3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.
4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.
5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.
6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.
7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.
8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.
9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.
10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.
11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.
12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.
13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.
14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.
15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.
2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.
3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.
4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.
5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.