Aqua-flo by Gecko XP2e: The Heart of Your Hot Tub Experience

Introduction

As an experienced hot tub enthusiast and parts supplier, I’m excited to introduce you to the Aqua-flo by Gecko XP2e 1.5HP 2 speed pump. This powerhouse is more than just a replacement part – it’s an upgrade that will breathe new life into your spa experience.

Unmatched Power and Efficiency

The Aqua-flo XP2e boasts a robust 1.5 HP dual-speed motor, engineered to deliver both efficient heating and invigorating massages. With its 2″ x 2″ connections, this pump is designed to seamlessly integrate into a wide range of hot tub systems.

Key Features:

1. Dual-Speed Versatility: Switch between energy-saving low speed for heating and circulation, and high speed for powerful hydrotherapy.
2. Universal Compatibility: Engineered to replace pumps from various brands including Waterway, GE, Emerson, and A.O Smith.
3. Built to Last: Constructed with high-quality materials to withstand the demanding hot tub environment.
4. User-Friendly Installation: Designed for straightforward replacement of existing pumps, minimizing downtime.

The Science Behind the Performance

The Aqua-flo XP2e isn’t just powerful – it’s smart. Its dual-speed functionality allows for optimal performance across different scenarios:

Low-Speed Operation:

• Perfect for efficient heating and gentle circulation
• Significantly reduces energy consumption
• Maintains consistent water temperature with minimal noise

High-Speed Operation:

• Delivers powerful jets for an invigorating massage experience
• Ensures thorough water circulation for improved sanitation
• Provides the thrust needed for water features and therapy jets

Revolutionize Your Hot Tub Experience

Upgrading to the Aqua-flo XP2e means more than just replacing a part. It’s about enhancing every aspect of your hot tub:

1. Energy Efficiency: The low-speed setting is perfect for maintaining temperature while minimizing power consumption.
2. Therapeutic Power: High-speed operation delivers the intense hydrotherapy you deserve.
3. Whisper-Quiet Operation: Enjoy a peaceful soak without the distraction of a noisy pump.
4. Improved Water Quality: Better circulation means cleaner, clearer water with less chemical usage.

Easy Integration for Peace of Mind

I understand that replacing a crucial component like a pump can seem daunting. That’s why the Aqua-flo XP2e is designed with ease of installation in mind:

• Matches the footprint of many popular pump brands
• 2″ x 2″ connections are industry standard (unions sold separately)
• Clear installation instructions included

Specifications Table

Specification	Value
Voltage	230V
Frequency	50 Hz
Amps (Low/High Speed)	1.6 / 6.7 A
RPM (Low/High Speed)	1440 / 2840
Capacitor (Low/High)	16 / 25 μF
Plumbing Connections	2″ x 2″ unions (sold separately)
Electrical Connections	1 x 4 core JJ lead
Dimensions (L x H x D)	379 mm x 232 mm x 203 mm

TECH-SHEET

• TechSheet

Why Choose the Aqua-flo XP2e?

1. Trusted Brand: Gecko is renowned in the hot tub industry for quality and innovation.
2. Versatile Performance: From gentle circulation to powerful massage, this pump does it all.
3. Long-Term Savings: Energy-efficient operation helps reduce your electricity bills.
4. Built for Longevity: High-quality construction ensures years of reliable service.

Conclusion

The Aqua-flo by Gecko XP2e 1.5HP 2 speed pump is more than just a replacement part – it’s an investment in your relaxation and well-being. With its perfect blend of power, efficiency, and reliability, this pump will transform your hot tub experience.

Don’t settle for a subpar spa experience. Upgrade to the Aqua-flo XP2e and rediscover the joy of your hot tub. If you have any questions about compatibility or installation, please don’t hesitate to reach out. Your perfect hot tub experience is just a pump away!

The hot tub indistry doesnt make it easy for you when you are trying to match up the size of the unions (the part that screws your pipe work onto the pumps) Below you can see the physical sizes of the collars, and how they relate to the actual union size you need. So a measurement of 2.5", edge to edge on the collar of the pump is actually a 1.5" union - confusing - absolutely! If you are not sure, give me a shout!

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.
2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)
3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.
4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.
5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.
6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.
7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.
8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.
9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.
10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.
11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.
12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.
13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.
14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.
15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.
2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.
3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.
4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.
5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.