1.5 inch 90 Low Profile Suction or Drain Grey
£20.80
Out of stock
Want to be notified when this product is back in stock?
| Type of Product: | Drain but can be used as a suction |
| Manufacturer: | Waterway |
| 25 | |
| Specifications: | 1.5″ socket – grey |
| Most Common Size Reference: | 1.5 inch |
| Dimensions: | Outer Diameter of face: 90mm Outer Height stood on face: 105mm Overall Length: 115mm Internal Diameter: 48mm |
| Fits Hole Size: | 1.5 inch |
| Commonly Used With: | 1.5 inch rigid pipe and 1.5 inch flexible rigid pipe. |
| Additional Notes: | Optimum flow rate: flow rate: 100 gallons per minute. When using a specific suction you should take into account the required flow intake for the pump you will be plumbing to and also the heater. On ALL systems it is required by BISHTA standards to install 2 suctions per pump to avoid entrapment and or disembowelment.
Instead of a straight socket style connection this is a 1.5 inch 90 elbow fitting. This style of fitting has been seen in Chinese Spas but can be used as a space saver on any Hot Tub. Best to use a plumbing cleaner then pipe cement to assemble. Pipework pushes inside this part at the female end. Assemble through the spa shell with silicone, you can use a gasket instead of the silicone but not both together as this often causes the gasket to spurge out the side and would cause a leak. |
Related products
Heat Pumps
£25.26
Out of stock
Cleaning etc
£0.84
Chemicals & Accessories
£8.22
Out of stock
Master Spa Parts
£6.02
Out of stock
£0.70
Out of stock
Barb Style Fittings and Metal Clips
£0.50
Out of stock
Flexible and Vinyl Pipe
£6.69
Out of stock
Gaskets
£0.57