🌈 Gecko IN.MIX-300 RGB LED Lighting Controller for Spa & Hot Tub in.lu.me Systems
Transform your spa or hot tub into a stunning visual experience with the Gecko IN.MIX-300 LED lighting controller. This professional-grade lighting control system puts a complete color console at your fingertips, allowing you to create personalized underwater color shows with up to 120 points of brilliant RGB LED light across 3 independent zones.
✅ Key Benefits:
- Instant Ambiance Control – Create the perfect mood for relaxation, romance, or entertaining with 78,000+ color combinations
- Multi-Zone Lighting – Control up to 3 different color zones independently in and around your spa
- Universal Compatibility – Works seamlessly with Gecko in.lu.me, in.k1000, in.k800, and in.k500 control systems
- Built-In Power Supply – No external transformer needed; connects directly to 100-240V AC power
- Professional Installation – Designed for permanent spa installations with IPX5 water resistance
Why Choose the IN.MIX-300?
The IN.MIX-300 isn’t just a lighting controller—it’s a complete lighting ecosystem designed specifically for spa and hot tub applications. Unlike generic LED controllers, this system is engineered to withstand the harsh spa environment (humidity up to 70%, temperatures from -4°F to 140°F) while delivering reliable, synchronized color control.
Perfect for:
- Residential spa and hot tub owners upgrading to premium lighting
- Spa manufacturers and builders requiring reliable OEM lighting solutions
- Retrofit installations replacing outdated or failed lighting systems
- Custom spa projects requiring multi-zone color control
💡 Standout Features
1. Three Independent Color Zones
Control different areas of your spa simultaneously. Set the waterline to blue, underwater jets to purple, and exterior accent lighting to amber—all from your keypad. Each zone operates independently with its own color, brightness, and effect settings.
2. Massive LED Capacity
Powers up to 120 RGB LED points distributed as:
- Zone 1 (OUT1 + OUT2): Up to 60 LEDs
- Zone 2 (OUT3): Up to 60 LEDs
- Zone 3 (OUT4): Up to 60 LEDs
Note: Total system capacity is 120 LEDs with 1.6A maximum current draw
3. Plug-and-Play Compatibility
Specifically engineered for Gecko’s in.lu.me lighting ecosystem. Simply connect the AMP power cord and in.lu.me connector—no complicated wiring or programming required.
4. 78,000+ Color Possibilities
When paired with in.k1000 or in.k1000+ touchscreen keypads, access an virtually unlimited palette of colors. Standard in.k800 and in.k500 keypads provide 10 preset colors plus 2 rainbow effects with smooth color transitions.
5. Universal Voltage Input
Built-in power supply accepts 100-240V AC at 50/60Hz, making it suitable for worldwide spa installations without voltage converters.
6. Weather-Resistant Design
IPX5-rated enclosure protects sensitive electronics from water spray and moisture. Operates reliably in temperatures from -4°F (-20°C) to 140°F (60°C).
7. Expandable Connectivity
Additional CO (communication) connector port allows daisy-chaining of other Gecko accessories, creating an integrated spa control ecosystem.
📊 Complete Technical Specifications
| Specification | Details |
|---|---|
| Model Number | 0609-521009 |
| Product Type | LED Lighting Controller & Power Supply |
| LED Output Capacity | Up to 120 RGB LED points (in.lu.me) |
| Number of Zones | 3 independent color zones |
| Number of Outputs | 4 connectors (assignable by configuration) |
| Output Voltage | 5 VDC (variable, switched) |
| Maximum Output Current | 1.6A total across all outputs |
| Color Options | Up to 78,000 colors (with in.k1000/in.k1000+ keypads)* |
| Effects | 2 Rainbow effects with smooth transitions |
| Input Voltage | 100-240V AC |
| Input Frequency | 50/60 Hz |
| Power Connector | AMP plug to control box |
| LED Connector | Plug for in.lu.me lights |
| Additional Ports | 1x CO connector for accessories |
| Dimensions (W × H × D) | 7.03″ × 6.13″ × 2.22″ (179mm × 156mm × 56mm) |
| Weight | 1.9 lbs (870g) |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Storage Temperature | -22°F to 185°F (-30°C to 85°C) |
| Humidity Rating | 70% maximum relative humidity |
| Water Resistance | IPX5 (protected against water jets) |
| Mounting | Vertical surface mount (2× #10 screws required) |
| Mounting Hole Spacing | 4″ (100mm) |
*in.k800 and in.k500 keypads offer 10 preset colors
🔌 Compatibility & Integration
Compatible Gecko Control Systems
✅ in.lu.me – Native compatibility
✅ in.k1000 Version 14 or later – Full 78,000-color support
✅ in.k800 Version 22 or later – 10-color preset support
✅ in.touch 2 – Touchscreen control integration
✅ Y Series Version 2 (-V2) – Second-generation spa packs
✅ X Series Version 2 (-V2) – Second-generation spa packs
Compatible Keypads
The IN.MIX-300 works seamlessly with these Gecko keypads:
🖥️ Touchscreen Keypads (78,000 colors):
- in.k1000 – Color LCD capacitive touchscreen
- in.k1000+ – Enhanced touchscreen with advanced features
- in.k1001 – Premium touchscreen model
- in.k1001+ – Top-tier touchscreen controller
🎛️ Button Keypads (10 preset colors):
- in.k800 – Color LCD display with 10 keys
- in.k500 – Color LCD display with 7 keys
Compatible LED Light Systems
Primary Compatibility:
- Gecko in.lu.me LED Light System – Designed specifically for this controller
Alternative Compatible Systems (with appropriate adapters, sold separately):
- J&J Electronics ColorCHOICE™ Spyder LEDs (max 100 LEDs)
- J&J Electronics Cluster LEDs
- Rising Dragon RGB LEDs (5V, max 120 LEDs)
- Rosstech RGB LEDs (12V, max 100 LEDs)
- Sloan LED RGB systems (12V, max 120 LEDs)
- Proway RGB LEDs (5V, max 120 LEDs)
⚠️ Important: When using non-Gecko LED systems, contact Gecko Alliance to verify compatibility and obtain correct adapter connectors.
🛠️ Installation Requirements
What’s Included in the Kit
- IN.MIX-300 controller with enclosure
- AMP power cord for connection to spa control box
- in.lu.me connector cable
- Installation manual
Required (Not Included)
- 2× #10 screws (appropriate length for mounting surface)
- 2× Washers (0.5″ OD × 0.0625″ thickness)
- Phillips screwdriver
- Compatible Gecko keypad
- in.lu.me LED light fixtures
- Licensed electrician or certified spa technician (recommended)
Installation Guidelines
Mounting Location Requirements: ✅ Must be mounted on a vertical surface
✅ Must be installed above the flood zone (above maximum water level)
✅ Must have adequate ventilation to prevent ambient temperature exceeding 140°F (60°C)
❌ Do not install in areas likely to be submerged
❌ Do not install near heat sources
❌ Do not install where foam insulation will contact the enclosure
Electrical Connections:
- Connect CO cable to spa pack CO port
- Connect AC power cable to direct spa pack output
- Connect in.lu.me LED lights to OUT1-OUT4 ports as needed
- Verify all gaskets and seals are properly seated before closing enclosure
Total Power Draw: 1.6A maximum across all outputs combined
💡 Professional Installation Recommended: While experienced DIYers can install this system, we strongly recommend hiring a licensed electrician or certified spa technician to ensure compliance with local electrical codes and UL/CSA safety standards.
🌊 Real-World Applications & Use Cases
Scenario 1: Evening Relaxation
Set Zone 1 (main spa interior) to calming soft blue, Zone 2 (waterfall accent) to tranquil green, and Zone 3 (exterior perimeter) to warm amber for a soothing after-work soak.
Scenario 2: Party Mode
Activate rainbow effects across all zones with synchronized color transitions, creating a dynamic light show for entertaining guests.
Scenario 3: Romantic Ambiance
Program all zones to romantic reds and purples with dimmed intensity for intimate evenings.
Scenario 4: Seasonal Themes
- Summer: Bright turquoise and aqua blues mimicking Caribbean waters
- Fall: Warm oranges and golds
- Winter: Cool whites and icy blues
- Spring: Vibrant greens and pinks
Scenario 5: Spa Therapy Enhancement
Chromotherapy practitioners can program specific color sequences to support relaxation therapy, using color psychology principles to enhance the spa experience.
🔧 Troubleshooting & Diagnostics
The IN.MIX-300 features built-in diagnostic LEDs to simplify troubleshooting:
Diagnostic LED #1 (VCC Power Supply)
Normal: Red LED continuously lit
Problem: LED not lit = Short circuit or overload on power supply
Solution Steps:
- Turn off spa pack power
- Verify spa pack fuse is intact
- Unplug all OUT1-OUT4 connectors from IN.MIX-300
- Restore power to spa pack
- If diagnostic LED lights up, reconnect zones one at a time to identify faulty zone
- If LED remains off with no zones connected, replace IN.MIX-300 unit
Diagnostic LED #2 (Communication)
Normal: Red LED continuously lit
Problem: LED not lit = Communication failure
Solution Steps:
- Verify all cables are securely connected
- Check CO connector between IN.MIX-300 and spa pack
- Verify keypad connections
- If all connections are verified and LED remains off, replace IN.MIX-300 PCB
Status Light Function (Optional)
When configured, one zone can be assigned as a status indicator:
- 🔵 Blue Flashing – Maintenance reminder active
- 🔵 Blue Steady – All systems normal
- 🔴 Red Flashing – Communication lost with spa pack
- 🔴 Red Steady – Spa system error detected
💰 Cost Comparison & Value Proposition
Why IN.MIX-300 vs. Generic LED Controllers?
| Feature | IN.MIX-300 | Generic Controllers |
|---|---|---|
| Spa-Specific Design | ✅ IPX5 water-resistant | ❌ Not rated for wet environments |
| Temperature Range | ✅ -4°F to 140°F | ❌ Typically 32°F to 104°F |
| Integration | ✅ Seamless with Gecko systems | ❌ Requires manual wiring/programming |
| Color Capacity | ✅ Up to 78,000 colors | ❌ Usually <1,000 colors |
| Warranty | ✅ Manufacturer supported | ❌ Often limited/none |
| Technical Support | ✅ Gecko Alliance global network | ❌ Limited or no support |
| Certifications | ✅ UL1563, CSA C22.2, CE | ❌ Often uncertified |
Long-Term Investment Benefits
- Reliability: Purpose-built for continuous spa operation in harsh conditions
- Energy Efficiency: Low-voltage LED operation reduces electricity costs vs. traditional spa lights
- Expandability: Add accessories via CO port without replacing controller
- Resale Value: Premium integrated lighting increases spa appeal and property value
- Safety: Full UL/CSA/CE certification provides peace of mind
⚠️ Important Safety Information
Before Installation
- Read all safety instructions in the technical manual before beginning installation
- Turn off all power to spa control system before making any connections
- Ensure enclosure gaskets are properly seated to prevent water ingress
- Never defeat grounding-type plugs or polarized plug safety features
During Operation
- ✅ Perform routine maintenance checks every 3 months
- ✅ Keep compartment door closed at all times during operation
- ✅ Replace components only with identical Gecko-approved parts
- ❌ Never open or service unit while power is connected
- ❌ Never connect LED lights not approved by Gecko Alliance
- ❌ Never use WD-40 or petroleum-based products on enclosure (causes chemical damage)
Damage Indicators – Turn Off Immediately If:
- Power supply cord is damaged or frayed
- Water is entering the IN.MIX enclosure
- Protective shields show signs of deterioration
- Unit has been dropped or physically damaged
- Unit has been exposed to rain or excessive moisture
- Unit does not operate normally
🚨 Refer all servicing to qualified personnel. No user-serviceable parts inside.
📥 Downloads & Technical Documentation
📄 Complete Technical Manual (opens in new tab)
18-page comprehensive TechBook including:
- Detailed safety instructions and warnings
- Complete installation procedures with diagrams
- LED wiring diagrams for all compatible light types
- Connector pinout specifications for custom installations
- Keypad compatibility matrix
- Troubleshooting flowcharts with diagnostic procedures
- Full technical specifications and certifications
- Dimensional drawings for enclosure planning
- Clearance requirements and mounting templates
❓ Frequently Asked Questions
Q: How many LED lights can I connect to the IN.MIX-300?
A: The IN.MIX-300 supports up to 120 RGB LED points when using Gecko in.lu.me light systems. Zone distribution is flexible: OUT1 and OUT2 combined support up to 60 LEDs (Zone 1), while OUT3 and OUT4 each support up to 60 LEDs (Zones 2 and 3). The total system is limited to 1.6A current draw across all outputs combined. If using J&J Electronics ColorCHOICE™ Spyder LEDs, the maximum is 100 LEDs.
Q: Can I control each LED light individually?
A: No, the IN.MIX-300 controls LEDs by zone, not individually. Each zone displays the same color and brightness across all LEDs in that zone. You have 3 independent zones (each can show different colors), but all LEDs within a single zone will show the same color simultaneously. This creates cohesive lighting areas rather than individual pixel control.
Q: What’s the difference between the different IN.MIX-300 model numbers?
A: Model 0609-521009 (this product) is specifically designed for Gecko in.lu.me LED systems with an AMP power connector. Other model variants (0609-521001 through 0609-521005) differ in their LED connector types (5V vs. 12V, Molex vs. MTA-100, J&J adapters) and power connection styles. The in.lu.me version (0609-521009) is the most common for modern Gecko spa systems.
Q: Will this work with my existing spa control system?
A: The IN.MIX-300-LU-ME (0609-521009) requires a compatible Gecko control system: in.lu.me, in.k1000 version 14+, in.k800 version 22+, in.touch 2, or X/Y series version 2 (-V2) spa packs. It will not work with non-Gecko control systems, first-generation Gecko systems, or standalone installation without a compatible spa pack. Verify your control system compatibility before purchasing.
Q: Can I use LED strip lights instead of in.lu.me fixtures?
A: While technically possible with custom adapters, Gecko Alliance strongly recommends using only in.lu.me LED fixtures designed for the IN.MIX-300. Generic LED strips typically lack the necessary current-limiting resistors (which must be included in your LED system since the controller doesn’t provide them) and may not be UL/CSA certified for wet locations. Using unapproved LED products voids your warranty and may create safety hazards.
Q: How do I change colors and brightness?
A: All color and brightness control is performed through your compatible Gecko keypad (in.k1000, in.k800, in.k500, etc.). The IN.MIX-300 itself has no user controls—it receives commands from your keypad via the CO communication cable. Keypad operation varies by model; consult your keypad’s manual for specific color selection procedures.
Q: What do the 78,000 colors refer to?
A: This represents the full RGB color spectrum available when using in.k1000 or in.k1000+ touchscreen keypads, which offer continuous color selection similar to selecting any color in a photo editing app. The number 78,000+ reflects the practical color resolution of the RGB mixing system (256 red × 256 green × 256 blue = 16.7 million theoretical combinations, practically limited to ~78,000 discernible shades). Note that in.k800 and in.k500 keypads offer 10 preset colors instead of full spectrum selection.
Q: Can I install this outdoors?
A: Yes, but with important considerations. The IN.MIX-300 is rated IPX5 (water jet protection), making it suitable for spa equipment areas with water exposure. However, it must be mounted on a vertical surface above the flood zone where it cannot be submerged, must be protected from direct weather exposure (install in an equipment cabinet or covered area), and ambient temperature must stay between -4°F and 140°F. It’s not designed for fully exposed outdoor mounting without proper enclosure.
Q: Do I need an electrician to install this?
A: We strongly recommend professional installation by a licensed electrician or certified spa technician. While the connections are relatively straightforward (CO cable to spa pack, AC power to spa pack output, LED lights to OUT ports), proper installation requires understanding of spa electrical systems, local electrical codes, UL1563/CSA C22.2 compliance requirements, and safe work practices around water and electricity. Improper installation can create shock hazards, void warranties, and violate local codes.
Q: What if my LED lights stop working?
A: First, check Diagnostic LED #1 on the IN.MIX-300. If it’s lit (red), the power supply is functioning and the problem is likely with LED wiring or fixtures. If Diagnostic LED #1 is off, follow the troubleshooting procedure in the technical manual to isolate the problem zone. Common causes include damaged LED fixtures, loose connectors, exceeded current capacity (too many LEDs), or incompatible LED lights. Always verify you haven’t exceeded 120 LEDs total or 1.6A current draw.
Q: Can I add more lighting zones later?
A: The IN.MIX-300 is fixed at 3 zones with 4 outputs. You cannot add more zones to the unit itself. However, you can expand within the existing zones by adding more LED fixtures (up to the 120 LED / 1.6A limit). If you need more than 3 independent zones, you would need to install an additional IN.MIX unit with its own spa pack connection, though this requires your spa pack to support multiple IN.MIX controllers.
Q: How long do the LED lights last?
A: LED light lifespan depends on the specific in.lu.me fixtures used, not the controller. Quality RGB LED fixtures typically last 30,000-50,000 hours of operation. Since spa lights are typically used 1-3 hours per day, this translates to 10-40+ years of service life. The IN.MIX-300 controller itself has no consumable parts and should last the life of your spa with proper installation and maintenance.
Q: Will this work with my pool lights?
A: No. The IN.MIX-300 is designed specifically for spa and hot tub applications with low-voltage (5VDC), low-current (1.6A max) LED systems. Swimming pool lighting typically requires much higher power capacity, different voltage outputs, and different UL/CSA certifications. Using this controller for pool lighting would be unsafe and ineffective. Look for dedicated pool lighting controllers designed for higher-capacity systems.
Q: What certifications does this product have?
A: The IN.MIX-300 carries comprehensive safety certifications including UL1563 (US safety standard for electric spas), CSA C22.2 No.218.1 (Canadian spa equipment standard), and European certifications including EN/IEC60335-1, EN/IEC60335-2, EN 55014-1, EN 55014-2, EN 61000-3-2, and EN 61000-3-3. These certifications ensure the product meets international safety, electromagnetic compatibility, and performance standards.
🛒 What You’re Buying
This listing is for one (1) Gecko IN.MIX-300 LED Lighting Controller, model 0609-521009, specifically configured for Gecko in.lu.me LED systems.
Package Includes:
- 1× IN.MIX-300 controller with enclosure
- 1× AMP power cord for spa pack connection
- 1× in.lu.me connector cable
- Gaskets and seals
- Installation documentation
Not Included (Sold Separately):
- Compatible Gecko keypad (in.k1000, in.k800, in.k500, etc.)
- in.lu.me LED light fixtures
- Mounting hardware (#10 screws and washers)
- Compatible Gecko spa control pack (if not already installed)
Warranty & Support:
- Covered by Gecko Alliance manufacturer warranty
- Global technical support through Gecko Alliance dealer network
- Replacement parts available through authorized distributors
🏆 Why Buy From Us?
✅ Genuine Gecko Alliance Product – Factory-fresh, never refurbished
✅ Fast Shipping – In-stock items ship within 1-2 business days
✅ Expert Support – Our team knows Gecko systems inside and out
✅ Competitive Pricing – Best value for genuine OEM parts
✅ Easy Returns – Hassle-free return policy if product doesn’t meet your needs
📞 Need Help?
Not sure if this controller is right for your spa? Have questions about compatibility with your existing system? Our spa lighting specialists are here to help!
Contact us for:
- Compatibility verification with your spa model
- Custom lighting design consultation
- Technical installation support
- Bulk pricing for spa builders and service companies



