💡 Gecko IN.MIX-300 5VDC LED Controller & Power Supply (Part #0609-521001)

Transform your hot tub or spa into a stunning underwater light show with the Gecko IN.MIX-300 LED lighting controller. This professional-grade system gives you complete control over spa illumination, allowing you to create the perfect ambiance for relaxation, entertainment, or therapeutic soaking sessions.

The IN.MIX-300 isn’t just a light controller—it’s your personal lighting console that transforms compatible Gecko keypads into full-featured color control centers. Whether you’re hosting an evening gathering or unwinding after a long day, create the exact mood you want with up to 78,000 color combinations and three independently controlled lighting zones.

✨ Key Features at a Glance

🎨 Ultimate Color Control Create stunning visual displays with access to up to 78,000 different colors (with in.k1000 and in.k1000+ keypads). The in.k800 and in.k500 keypads offer a curated selection of 10 vibrant colors. Control each zone independently or synchronize them for coordinated light shows that rival commercial installations.

🌈 Three Independent Lighting Zones Illuminate up to three separate areas in and around your spa. Place accent lighting in the water, highlight architectural features around your spa deck, or create distinct mood zones for different areas of your hot tub. Each zone can be controlled independently or synchronized for dramatic effects.

⚡ Built-In Power Supply No external power supplies needed—the IN.MIX-300 includes integrated power conversion that works with both 120V and 240V AC inputs and delivers clean 5VDC power to your LED fixtures. This means cleaner installations, fewer components, and more reliable operation.

💡 Supports Up to 100 RGB LED Points Connect up to 100 individual RGB (Red, Green, Blue) LED light points, distributed however you like across the three zones. This gives you incredible flexibility in designing your lighting layout—from subtle accent lighting to bold, immersive displays.

🎛️ Seamless Keypad Integration When connected to compatible Gecko keypads (in.k1000, in.k800, in.k500), the IN.MIX-300 transforms your control interface into a sophisticated lighting console. Adjust colors, create fading effects, modify brightness, and switch between zones—all from the comfort of your spa.

📱 Remote Control Ready Compatible with Gecko’s in.touch 2 mobile app, allowing you to control your spa lighting from anywhere. Change colors, adjust zones, and set lighting scenes from your smartphone or tablet.

🔌 Additional Connectivity Features an extra CO (communication) connector port for expanding your spa system with additional Gecko accessories like audio systems, water care monitors, or other smart spa components.

📊 Complete Technical Specifications

Specification	Details
Part Number	0609-521001
Model	IN.MIX-300-SL-AMP-V-GE1
Input Voltage	240V AC, 50/60Hz compatible (100-240V AC range)
Output Voltage	5V DC (switched output to simulate 5V)
Maximum Output Current	1.6 Amps
Dimensions	180mm (L) × 156mm (H) × 56mm (D) <br> 7.03″ (L) × 6.13″ (H) × 2.22″ (D)
Weight	870g (1.9 lbs)
Number of Zones	3 independently controllable zones
LED Capacity	Up to 100 RGB LED points (Rising Dragon/Proway compatible) <br> Up to 120 LED points with other compatible systems
Color Options	Up to 78,000 colors*
Connector Type	AMP power plug + Molex SL series LED connectors
CO Port	Yes (for system expansion)
Operating Temperature	-20°C to 60°C (-4°F to 140°F)
Storage Temperature	-30°C to 85°C (-22°F to 185°F)
Humidity Rating	70% maximum
Water Protection	IPX5 rated
Certifications	EN/IEC60335-1: 2010/A1: 2013 <br> EN/IEC60335-2: 60/A2: 2008 <br> CSA No 22.2 – 218.1 – M89 <br> CEM Europe EN 55014-1/2, EN 61000-3-2/3

*with in.k1000 and in.k1000+ keypads. The in.k800 and in.k500 keypads offer 10 color options.

🔧 What’s Included in the Kit

Your Gecko IN.MIX-300 package includes everything you need to get started:

✅ IN.MIX-300 LED controller module ✅ AMP power cord for spa pack connection ✅ Molex SL series connectors for LED wiring ✅ 5VDC LED port connections

Note: LED light fixtures are sold separately. This controller is compatible with Rising Dragon, Proway, J&J Electronics ColorCHOICE series, and other approved 5V LED systems.

🔌 System Compatibility

Compatible Spa Control Systems

The IN.MIX-300 works seamlessly with Gecko’s X and Y series spa control platforms:

Y Series Controllers (Version 2 or later):

• in.yt-12
• in.yt-8
• in.yt-7
• in.ye-5
• in.ye-3

X Series Controllers:

• in.xm2
• in.xe

⚠️ Important: Your spa control system must be Version 2 (-V2) or later for compatibility. Earlier versions are not supported.

Compatible Keypads

Transform these Gecko keypads into full lighting control consoles:

Full-Featured Color Control:

• in.k1000 (Version 14 or higher) – Touchscreen with 78,000 color access
• in.k1000+ – Enhanced touchscreen model

10-Color Selection:

• in.k800 (Version 22 or higher) – Color LCD display
• in.k500 (Version 19 or higher) – Simplified color control

Remote Control:

• in.touch 2 mobile app – iOS and Android compatible

Compatible LED Lighting Systems

The IN.MIX-300 5VDC model supports these LED systems:

✅ Rising Dragon 5V LED Systems – Up to 120 LED points ✅ Proway 5V LED Fixtures – Up to 120 LED points ✅ J&J Electronics ColorCHOICE Series – Up to 100 Spyder LED points ✅ Other Gecko-Approved 5V Systems – Contact Gecko Alliance to verify

Connector Specifications:

• Female Housing 4-Position: Molex #50-57-9404
• Female Housing 5-Position: Molex #50-57-9405
• Pin Female (AWG 22-24): Molex #16-02-0102

💡 Need Help Choosing LEDs? Contact Gecko Alliance directly to confirm compatibility with your specific LED fixtures before purchasing.

🎨 Understanding the Three-Zone System

Zone Configuration

The IN.MIX-300 provides ultimate flexibility with three distinct lighting zones:

Zone 1 – Dual Connection Options

• Zone 1A: 5-pin LED connection (for cluster-type fixtures with built-in switching)
• Zone 1B: 4-pin LED connection (for standard RGB LEDs)
• Both 1A and 1B always display the same color (they’re on the same zone)

Zone 2 – Standard 4-Pin Connection Independent color control with standard RGB LED compatibility

Zone 3 – Standard 4-Pin Connection Independent color control with standard RGB LED compatibility

Typical Zone Applications

🌊 Zone 1: Main Water Illumination Install primary underwater lighting to illuminate the entire spa interior. This creates your foundational lighting effect.

💎 Zone 2: Accent & Feature Lighting Highlight waterfalls, jets, or architectural features. Perfect for creating focal points and visual interest.

🏮 Zone 3: Perimeter & Deck Lighting Illuminate the area around your spa for safety and ambiance. Great for steps, seating areas, or landscaping features.

Creative Zone Ideas

Romantic Evening: Soft purple in Zone 1, warm amber in Zone 2, dim blue around the perimeter

Party Mode: Synchronized color cycling across all zones with fading effects

Relaxation: Gentle green underwater, subtle white accents, minimal perimeter lighting

Therapeutic: Calming blue throughout with slow color transitions

🎛️ Advanced Lighting Features

Color Customization

For in.k1000 & in.k1000+ Users: Access a virtually unlimited palette of 78,000+ color combinations. Use the intuitive touchscreen interface to:

• Select precise colors using the color wheel
• Fine-tune hue, saturation, and brightness
• Save favorite color combinations
• Create custom lighting scenes

For in.k800 & in.k500 Users: Choose from 10 carefully selected colors optimized for spa environments:

• Deep Blue
• Aqua
• Emerald Green
• Warm White
• Cool White
• Amber
• Purple
• Magenta
• Red
• Soft Pink

Dynamic Effects

Fading Transitions Create smooth color transitions between settings. Choose fast fading for energetic effects or slow fading for relaxing ambiance changes.

Rainbow Effects Two distinct rainbow modes create automatic color-cycling displays that transition through the entire color spectrum.

Intensity Dimming Adjust brightness levels independently in each zone. Go from subtle accent lighting to bold, dramatic displays with simple adjustments.

Zone Synchronization Link all zones together for coordinated color changes, or keep them independent for complex lighting designs.

📐 Installation Requirements & Considerations

Electrical Requirements

⚠️ CRITICAL SAFETY NOTE: All electrical installation MUST be performed by a qualified electrician in accordance with local electrical codes and regulations. Improper installation can result in electrical shock, fire, or equipment damage.

Power Connection:

• Requires connection to spa pack’s accessory output
• Compatible with 120V or 240V AC spa systems
• Connected via AMP plug to spa control system
• Must be protected by appropriate circuit breaker (consult spa pack specifications)

Mounting Location

Recommended Installation:

• Mount on a vertical surface to prevent water ingress
• Minimum 4″ (100mm) clearance on all sides for ventilation
• Under spa skirt, away from direct water exposure
• Accessible for future maintenance or troubleshooting
• Secure using two #10 screws with round, truss, or pan heads

Environmental Considerations:

• Keep away from direct heat sources (heater, pump motors)
• Avoid locations subject to pooling water
• Ensure adequate ventilation for heat dissipation
• Protect from direct sunlight if mounted externally

Wiring Considerations

LED Cable Runs:

• Use appropriate gauge wire for cable length (consult LED manufacturer)
• Keep LED cables away from high-voltage power cables
• Use waterproof connectors rated IPX5 or higher
• Secure cables to prevent chafing or damage
• Label each zone connection for future reference

Maximum Cable Lengths (approximate guidelines):

• Zone 1A/1B: Up to 20 feet recommended
• Zone 2: Up to 20 feet recommended
• Zone 3: Up to 20 feet recommended

Longer runs may result in voltage drop and reduced LED brightness. Consult your LED manufacturer for specific recommendations.

🛠️ Installation Overview

Professional Installation Required – This is a complex installation that requires electrical expertise and knowledge of spa systems.

Installation Process Summary

1. Power Down: Turn off all power to the spa at the circuit breaker
2. Locate Spa Pack: Access the spa’s control system compartment
3. Connect Power: Attach AMP power cord to spa pack’s accessory output
4. Connect Communication: Connect CO cable to spa pack’s CO port
5. Mount Controller: Secure IN.MIX-300 to vertical surface with proper clearance
6. Wire LED Zones: Connect LED fixtures to appropriate zone outputs
7. Verify Connections: Double-check all connections and cable routing
8. Power Up: Restore power and verify LED diagnostic indicators
9. Configure Keypad: Set up lighting zones on compatible Gecko keypad
10. Test System: Verify all zones, colors, and functions operate correctly

Diagnostic LEDs

The IN.MIX-300 features three diagnostic LEDs to help troubleshoot issues:

LED #1 (Red) – Power Supply Indicator

• Normal: Always lit (red)
• Problem: Not lit indicates short circuit or overload on power supply

LED #2 (Yellow) – Communication Indicator

• Normal: Always lit (yellow)
• Problem: Not lit indicates incorrect module insertion or connection issue

LED #3 (Red) – System Indicator

• Normal: Always lit (red)
• Problem: Not lit indicates incorrect module insertion or connection issue

If any diagnostic LED is not lit, consult the troubleshooting section in the technical manual or contact a qualified spa technician.

❓ Frequently Asked Questions

Q: Can I install the IN.MIX-300 myself? A: While physically mounting the unit is straightforward, the electrical connections MUST be made by a qualified electrician familiar with spa electrical systems. Improper installation voids warranties and creates serious safety hazards.

Q: Do LED lights come with the controller? A: No, LED light fixtures are sold separately. The IN.MIX-300 is compatible with various 5V LED systems including Rising Dragon, Proway, and J&J Electronics. You’ll need to purchase compatible LED fixtures separately.

Q: Will this work with my existing spa? A: The IN.MIX-300 requires a compatible Gecko spa control system (X or Y series Version 2 or later) and a compatible keypad (in.k1000, in.k800, or in.k500). If your spa doesn’t have a Gecko control system, this controller cannot be retrofitted without replacing the entire spa control system.

Q: How many lights can I connect? A: Up to 100 RGB LED points with J&J Electronics systems, or up to 120 points with Rising Dragon and Proway systems. The total is limited by the 1.6 Amp maximum output current. Actual capacity depends on your specific LED fixtures’ power consumption.

Q: Can I mix different LED brands on different zones? A: Generally not recommended. Different LED brands may have different voltage requirements, current draws, and control protocols. It’s best to use the same LED system throughout. Contact Gecko Alliance to verify specific combinations.

Q: What’s the difference between the 5V and 12V versions of the IN.MIX-300? A: This 5VDC model (part #0609-521001) is designed for 5-volt LED systems like Rising Dragon and Proway. The 12V versions (part #0609-521003 and #0609-521004) are for 12-volt systems like SloanLED and Rosstech. These are NOT interchangeable – always match the controller voltage to your LED system voltage.

Q: Can I control the lights when I’m away from home? A: Yes! When your spa is equipped with the Gecko in.touch 2 system, you can control all lighting functions remotely via the in.touch 2 mobile app on your smartphone or tablet, from anywhere with internet access.

Q: What happens if one LED fails? A: LED systems are typically wired in parallel, so one failed LED won’t affect the others. However, a short circuit in one LED could trip the controller’s protection system and shut down that entire zone until repaired.

Q: How long do the LEDs last? A: Quality spa-grade LEDs typically last 25,000-50,000 hours. At 3 hours daily use, this translates to 8-15 years of service life. The IN.MIX-300 controller itself has no consumable parts and should last the lifetime of your spa with proper installation and use.

Q: Is the IN.MIX-300 waterproof? A: The controller has an IPX5 water protection rating, meaning it’s protected against water jets from any direction. However, it should still be mounted in a protected location under the spa skirt, not in direct contact with water.

Q: Can I add more zones later? A: No, the IN.MIX-300 supports a fixed maximum of three zones. However, you can redistribute your LED fixtures among zones at any time. For example, you could start with one zone and add additional zones later by installing more LED fixtures.

Q: Do the rainbow effects work with all keypads? A: Yes, rainbow effect modes are available on all compatible keypads (in.k1000, in.k800, in.k500). However, the number of available colors and customization options varies by keypad model.

Q: What’s the warranty on the IN.MIX-300? A: Warranty terms vary by region and retailer. Contact your spa dealer or Gecko Alliance directly for specific warranty information. Always register your product after installation to ensure warranty coverage.

📄 Downloads & Technical Documentation

Official Technical Manuals

📄 Gecko IN.MIX-300Technical Manual (opens in new tab) Technical documentation for board-mounted IN.MIX-300 modules integrated into in.yt spa platforms. Includes compatibility information and installation procedures specific to YT-series control systems. 8 pages.

🛡️ Important Safety Information & Warnings

Electrical Safety

⚠️ DANGER – RISK OF ELECTRIC SHOCK

NEVER:

• Work on the controller or spa electrical system with power connected
• Open the controller cover with power connected
• Connect or disconnect cables with power on
• Touch internal components without proper electrostatic discharge (ESD) protection
• Attempt repairs or modifications yourself

ALWAYS:

• Turn off power at the main circuit breaker before any work
• Use only qualified, licensed electricians for installation
• Follow all local electrical codes and regulations
• Replace damaged components only with identical Gecko parts
• Keep the controller cover closed and secured during operation

Installation Safety

⚠️ CAUTION

• The IN.MIX-300 must be installed inside a spa equipment compartment or protected enclosure
• This product is NOT meant for any use other than spa/hot tub lighting control
• Install only as directed in the official technical manual
• Handle with care to avoid electrostatic damage to sensitive electronics
• Ensure all connections are secure and properly sealed against moisture
• There are NO user-serviceable parts inside the controller

LED Connection Safety

⚠️ WARNING – TO PREVENT DAMAGE, FIRE, AND ELECTROCUTION

• DO NOT connect any LED assembly cable that has not been approved by Gecko Alliance
• ONLY use LED fixtures specifically certified for use with the IN.MIX-300
• Current-limiting resistors must be included with LEDs (supplied by LED manufacturer)
• NEVER connect LEDs directly to any zone output without proper current limiting
• Verify correct voltage rating (5VDC) before connecting any LED fixture

Operational Safety

During normal use:

• Do not exceed the maximum load of 1.6 Amps per controller
• Distribute LED fixtures evenly across zones to prevent overload
• Monitor diagnostic LEDs regularly to detect issues early
• Keep the controller compartment clean and free of debris
• Ensure adequate ventilation around the controller
• Inspect cable connections periodically for corrosion or damage

Service & Maintenance

If you experience problems:

• Turn off power immediately if you notice unusual behavior
• Refer all servicing to qualified spa service personnel
• Do not attempt to repair the controller yourself
• Contact Gecko Alliance technical support for assistance
• Keep records of all maintenance and service performed

Additional Precautions

Water Damage Prevention:

• Ensure controller gasket is properly seated before closing cover
• Mount controller vertically to prevent water accumulation
• Check for water ingress periodically, especially after heavy rain
• Replace damaged gaskets immediately

Overheating Prevention:

• Maintain minimum 4″ clearance around controller
• Do not install near spa heaters or pump motors
• Ensure adequate ventilation in equipment compartment
• Do not cover or obstruct controller ventilation

🌟 Why Choose Gecko IN.MIX-300?

Industry-Leading Technology

Gecko Alliance is the world’s premier manufacturer of spa control systems, trusted by major hot tub brands globally. The IN.MIX-300 represents decades of engineering excellence and real-world performance in the demanding spa environment.

Proven Reliability: Tested to withstand extreme temperatures, humidity, vibration, and corrosive spa chemicals

Future-Proof Design: Compatible with current and future Gecko control systems and accessories

Professional Grade: The same technology used in commercial spa installations worldwide

Superior Color Control

Unlike simple fixed-color LED systems, the IN.MIX-300 offers:

✅ 78,000+ color combinations with in.k1000 keypads ✅ Smooth color transitions and fading effects ✅ Independent zone control for sophisticated lighting designs ✅ Rainbow modes for automatic color cycling ✅ Adjustable intensity to match any mood or occasion

Smart Integration

The IN.MIX-300 doesn’t just control lights—it’s part of a complete smart spa ecosystem:

🏠 Home Integration: Works with in.touch 2 for remote control and automation 🎵 Audio Compatibility: Coordinate lighting with Gecko in.stream 2 audio systems 💧 Water Care: Integrate with Gecko water management systems 📱 App Control: Full functionality via smartphone or tablet

Long-Term Value

Lower Operating Costs: LED efficiency dramatically reduces electricity consumption Extended LED Life: Quality 5V LEDs last 8-10+ years with typical spa use Maintenance-Free Operation: No user-serviceable parts means no ongoing maintenance costs Increased Property Value: Modern smart spa systems enhance home value and appeal

🎯 Perfect For These Applications

Residential Installations

✅ New Spa Installations – Build your perfect spa lighting system from the ground up ✅ Retrofit Upgrades – Transform existing Gecko-equipped spas with advanced lighting ✅ Outdoor Entertainment Spaces – Create resort-style ambiance in your backyard ✅ Architectural Lighting – Highlight landscaping, water features, and hardscaping

Commercial Applications

✅ Hotels & Resorts – Impress guests with professional-grade spa experiences ✅ Fitness Centers – Enhance relaxation areas and therapeutic pools ✅ Wellness Spas – Create customized ambiance for treatments and therapies ✅ Rental Properties – Add a luxury amenity that sets your property apart

Special Requirements

✅ Chromatherapy – Use specific colors for therapeutic relaxation protocols ✅ Entertainment – Dynamic lighting for parties and social gatherings ✅ Romance – Create intimate ambiance for special occasions ✅ Safety – Improve visibility and navigation around spa areas

📦 Package Contents & Product Identification

What’s in the Box

When you receive your Gecko IN.MIX-300, verify you have all components:

• ✅ IN.MIX-300 controller module (1)
• ✅ AMP power cord with plug (1)
• ✅ Molex SL series connectors (4 – one per output)
• ✅ Installation documentation

Product Identification

Model: IN.MIX-300-SL-AMP-V-GE1 Part Number: 0609-521001 Output Type: 5VDC Connection Type: Molex SL + AMP + in.link

This is the 5-volt version compatible with:

• Rising Dragon 5V LED systems
• Proway 5V LED fixtures
• J&J Electronics ColorCHOICE series (5V models)

⚠️ Verification: Before installation, confirm your LED fixtures are rated for 5VDC operation. Using incorrect voltage LEDs will damage both the controller and the LED fixtures.

⚡ Quick Start Guide Summary

Before You Begin:

1. ✅ Verify you have a compatible Gecko spa control system (X or Y series V2 or later)
2. ✅ Confirm your keypad is compatible (in.k1000, in.k800, or in.k500)
3. ✅ Purchase compatible 5V LED fixtures (sold separately)
4. ✅ Download and review the complete technical manual
5. ✅ Schedule installation with a qualified electrician/spa technician

Installation Steps (Professional Only):

1. Power down spa at circuit breaker
2. Mount IN.MIX-300 vertically in protected location
3. Connect AMP power cord to spa pack accessory output
4. Connect CO cable to spa pack CO port
5. Wire LED fixtures to appropriate zone outputs
6. Verify all connections and diagnostic LEDs
7. Power up and configure zones on keypad
8. Test all colors, zones, and effects

Using Your Lighting System:

1. Access lighting controls from your compatible Gecko keypad
2. Select zone(s) to control
3. Choose colors from available palette
4. Adjust brightness and fading effects
5. Save favorite combinations for quick access
6. Enjoy your personalized spa lighting experience!

🏆 Gecko Alliance Quality & Heritage

Gecko Alliance has been the innovative leader in spa control technology for over 30 years. Trusted by the world’s top spa manufacturers, Gecko products are known for:

• Uncompromising Quality – Rigorous testing and premium components ensure reliable performance
• Innovative Technology – Continuous investment in R&D keeps Gecko at the forefront of spa automation
• Global Support – Worldwide dealer network and technical support infrastructure
• Environmental Responsibility – Energy-efficient designs reduce environmental impact
• Customer Focus – Products designed around real user needs and feedback

When you choose Gecko IN.MIX-300, you’re choosing the same professional-grade technology used in luxury spas and resorts worldwide, backed by decades of engineering excellence and proven reliability.

🛒 Ready to Transform Your Spa Experience?

The Gecko IN.MIX-300 5VDC LED Controller represents the pinnacle of spa lighting technology. With three independent zones, support for up to 100 RGB LED points, and access to 78,000 colors, you’ll have everything you need to create the perfect ambiance for any occasion.

Compatible with: Gecko X & Y Series Control Systems (V2 or later) Required: Compatible Gecko keypad (in.k1000, in.k800, or in.k500) Professional Installation Required