♨️ Vian Power VP300 Spa Pump – 3.0 HP Single Speed

Maximum power single-speed jet pump for demanding hot tub applications

💧 Product Overview

The Vian Power VP300 is a high-performance single-speed pump engineered for spa and hot tub applications requiring maximum jet power. Delivering an impressive 3.0 HP (2.2 kW) output at 2900 RPM, this pump provides exceptional water flow for the most demanding jet systems.

As a dedicated jet pump, the VP300 focuses entirely on delivering maximum performance during hydrotherapy sessions. The single-speed design offers simplicity and reliability, with the full 3.0 HP power dedicated to driving massage jets with strong, consistent pressure.

With 2-inch plumbing connections (78mm OD male threaded) and a pre-wired 3-metre cable with AMP plug, the VP300 is designed for straightforward installation. This pump is commonly used in Chinese hot tubs and brands including AMC Winer Spas, DanZ Spas, Spa Serve, and Trade Price Hot Tubs.

⭐ Key Features

✅ Powerful 3.0 HP Motor – 2.2 kW output delivers maximum jet pressure

✅ Single Speed Operation – Dedicated high-speed for powerful jet performance

✅ 2900 RPM – High rotational speed ensures strong water flow

✅ 10 Amp Current Draw – Power for demanding applications

✅ 230V / 50Hz – UK standard electrical supply

✅ 2-Inch Plumbing – 78mm OD male threaded connections

✅ Pre-Wired with AMP Plug – 3-metre, 3-core cable for easy connection

✅ 50 µF Capacitor – Reliable motor starting

✅ Compact Design – 400 × 205 × 205 mm fits most spa cabinets

🔩 Technical Specifications

Specification	Value
Pump Type	Single-Speed Massage Pump
Motor Power	3.0 HP / 2.2 kW
Speed Settings	Single Speed
Voltage	230 V
Frequency	50 Hz
Amperage	10 A
RPM	2900
Capacitor	50 µF
Plumbing Size	2 inch / 78 mm OD (male threaded)
Dimensions (L × W × H)	400 × 205 × 205 mm
Cable Length	3 metres
Cable Type	3-core with AMP plug

⚡ Electrical Requirements

Electrical Specification	Requirement
Supply Voltage	230 V
Frequency	50 Hz
Phase	Single Phase
Full Load Amps	10 A
Capacitor	50 µF
Cable Configuration	3-core with AMP plug

⚠️ IMPORTANT ELECTRICAL SAFETY NOTICE:

All electrical work must be carried out by a qualified electrician in accordance with UK wiring regulations (BS 7671). Hot tubs require RCD protection (30mA). The pump must be properly bonded to the spa’s earthing system.

⚙️ Compatibility Guide

This Pump:

📍 Type: Single-Speed Massage Pump
📍 Plumbing: 2 inch (78mm thread OD)
📍 Electrical: 3-metre, 3-core cable with AMP plug

Compatible With:

• AMC Winer Spas
• DanZ Spas
• Spa Serve
• Trade Price Hot Tubs
• Chinese-manufactured hot tubs
• Systems with standard 2″ plumbing connections

🔌 Installation Requirements

Mounting:

Requirement	Specification
Mounting Position	Horizontal
Base	Solid, level, vibration-dampening surface
Ventilation	Adequate clearance for motor cooling
Access	Sufficient space for maintenance

Plumbing Connections:

Connection	Size
Plumbing Size	2 inch / 78 mm OD (male threaded)

Electrical Connections:

The VP300 comes pre-fitted with a 3-metre, 3-core cable with AMP plug connector. The three wires are:

• 1 × Live – high speed
• 1 × Neutral
• 1 × Earth

Installation Notes:

⚠️ Pump must be installed below water level or primed before operation
⚠️ Never run pump dry – causes seal and motor damage
⚠️ Ensure proper bonding to earth as per BS 7671 regulations
⚠️ Check all union connections for leaks before powering on

🔧 Maintenance Guide

Routine Maintenance:

Task	Frequency	Notes
Check for leaks	Monthly	Inspect around seal and unions
Inspect unions	Monthly	Hand-tighten if loose
Clean strainer/filter	As needed	Ensure adequate water flow
Check amperage draw	Annually	Should match rated value (10A)
Inspect motor vents	Quarterly	Keep clear of debris
Check mounting bolts	Quarterly	Tighten if loose

Warning Signs – Consider Pump Replacement If:

• Unusual noise (grinding, screeching, or humming)
• Water leaking from seal area
• Motor trips circuit breaker repeatedly
• Noticeably reduced water flow
• Motor runs excessively hot

🛁 Ideal Applications

Application	Suitability	Notes
♨️ Hot tub jet pump	✅ Excellent	Maximum power for massage jets
♨️ Spa booster pump	✅ Excellent	High-power boost for jet zones
🛁 Whirlpool bath	✅ Good	Suitable for large whirlpool systems

Not Suitable For:

• 24-hour circulation duty (use circulation pump instead)
• Filtration cycles (no low-speed option)
• Heating circulation (requires separate circulation pump)

❓ Frequently Asked Questions

Q: What horsepower is this pump?
A: The Vian Power VP300 is rated at 3.0 HP (2.2 kW) single speed.

Q: What are the amperage and RPM ratings?
A: The pump draws 10A and runs at 2900 RPM.

Q: What voltage does this pump require?
A: 230V / 50Hz single-phase supply, which is standard UK mains voltage.

Q: What size are the plumbing connections?
A: 2-inch with 78mm outer thread diameter (male threaded).

Q: What cable does this pump have?
A: 3-metre, 3-core cable with AMP plug connector.

Q: What is the capacitor size?
A: 50 µF.

Q: Will this fit my hot tub?
A: Check your existing pump’s dimensions and port sizes. This pump measures 400 × 205 × 205 mm with 2-inch connections. Contact Parts4Tubs for compatibility assistance.

Q: Which hot tub brands use this pump?
A: Commonly used in AMC Winer Spas, DanZ Spas, Spa Serve, Trade Price Hot Tubs, and other Chinese-manufactured hot tubs.

✅ Why Choose the Vian Power VP300

✅ Maximum Power Output – 3.0 HP for the most demanding jet systems

✅ Simple & Reliable – Single-speed design with fewer components

✅ Strong Performance – 2900 RPM delivers powerful water flow

✅ Easy Installation – Pre-wired with AMP plug and standard 2″ connections

✅ Proven Compatibility – Used in major spa brands

✅ Compact Size – Fits standard spa cabinets

🤝 Why Buy From Parts4Tubs

✅ UK-based company with local customer support

✅ Fast UK delivery to minimise spa downtime

✅ Expert advice from spa specialists

✅ Competitive pricing on quality components

✅ Full warranty support for peace of mind

✅ Easy returns within 30 days

♨️ Summary

The Vian Power VP300 is a powerful 3.0 HP (2.2 kW) single-speed massage pump for hot tub and spa applications requiring maximum jet power. Running at 2900 RPM with 10A current draw at 230V/50Hz, this dedicated jet pump delivers strong water flow for demanding hydrotherapy systems. Featuring 2-inch plumbing connections (78mm OD male threaded), 50 µF capacitor, and pre-wired 3-metre cable with AMP plug, the VP300 is commonly used in AMC Winer Spas, DanZ Spas, Spa Serve, and Trade Price Hot Tubs. Compact dimensions of 400 × 205 × 205 mm ensure easy fitment. Order today for maximum jet performance.