♨️ Vian Power VP200 Spa Pump – 2.0 HP Single Speed
High-performance single-speed jet pump for powerful hydrotherapy massage
💧 Product Overview
The Vian Power VP200 is a robust single-speed jet pump engineered specifically for hot tub and spa applications. Delivering a powerful 2.0 HP (1.5 kW) output at 2900 RPM, this pump provides exceptional water flow to drive your spa’s massage jets with impressive force and consistency.
Designed as a dedicated jet or booster pump, the VP200 focuses entirely on delivering maximum performance when you need it most – during your relaxing hydrotherapy sessions. The single-speed design offers simplicity and reliability with fewer components to maintain compared to dual-speed alternatives.
Built to the same high standards as the VP200-II, this pump features a 56 frame motor, 2-inch plumbing connections, and comes pre-wired with a 3-metre cable and AMP plug for easy installation. The VP200 is widely used in Chinese-manufactured hot tubs and is compatible with various spa control systems, making it an excellent replacement choice for existing single-speed jet pumps.
⭐ Key Features
✅ Powerful 2.0 HP Motor – 1.5 kW output delivers strong, satisfying jet pressure for effective hydrotherapy
✅ Single Speed Simplicity – Dedicated high-speed operation for maximum jet performance
✅ 2900 RPM Operation – High rotational speed ensures powerful water flow through jets
✅ Industry-Standard Design – Compatible with common spa configurations
✅ 230V/50Hz UK Compatible – Designed for UK electrical supply
✅ 2-Inch Plumbing Connections – Standard 78mm OD male threaded ports
✅ Pre-Wired with AMP Plug – 3-metre, 3-core cable ready for connection
✅ Mechanical Seals – Quality shaft seal for reliable operation
✅ Compact Dimensions – 400 × 205 × 205 mm fits most spa cabinet installations
✅ Robust Construction – Reinforced pump housing with aluminium cooling fins
🔩 Technical Specifications
| Specification | Value |
|---|---|
| Pump Type | Single-Speed Jet/Massage Pump |
| Motor Power | 2.0 HP / 1.5 kW |
| Speed Settings | Single Speed |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Amperage | 7.0 A |
| RPM | 2900 |
| Capacitor | 30 µF |
| Wet End Configuration | 2-inch |
| Discharge Port | 2 inch / 78 mm OD (male threaded) |
| Suction Port | 2 inch / 78 mm OD (male threaded) |
| Dimensions (L × W × H) | 400 × 205 × 205 mm |
| Cable Length | 3 metres |
| Cable Type | 3-core with AMP plug |
⚡ Electrical Requirements
| Electrical Specification | Requirement |
|---|---|
| Supply Voltage | 230 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Full Load Amps | 7.0 A |
| Capacitor Rating | 30 µF |
| Thermal Protection | Built-in |
| Cable Configuration | 3-core (Live, Neutral, Earth) |
⚠️ IMPORTANT ELECTRICAL SAFETY NOTICE:
All electrical work must be carried out by a qualified electrician in accordance with UK wiring regulations (BS 7671). Hot tubs require RCD protection (30mA). The pump must be properly bonded to the spa’s earthing system.
⚙️ Compatibility Guide
This Pump:
📍 Type: Single-Speed Jet/Booster Pump
📍 Wet End: 2 inch
📍 Discharge: 2 inch (78mm thread OD)
📍 Suction: 2 inch (78mm thread OD)
📍 Electrical: 3-metre, 3-core cable with AMP plug connector
Compatible With:
- Chinese-manufactured hot tubs and spas
- Spas using Balboa control systems
- Hot tubs requiring dedicated jet/booster pump
- Systems with standard 2″ plumbing connections
Can Replace:
- LX LP200 single-speed pumps (verify dimensions before ordering)
- Similar 2HP single-speed pumps with 2″ connections
Note: This is a single-speed pump for jet operation only. If you need a pump that also handles filtration and heating at low speed, consider the dual-speed VP200-II.
🔌 Installation Requirements
Mounting:
| Requirement | Specification |
|---|---|
| Mounting Position | Horizontal (motor shaft horizontal) |
| Base | Solid, level, vibration-dampening surface |
| Ventilation | Minimum 50mm clearance around motor for cooling |
| Access | Minimum 300mm clearance for maintenance access |
Plumbing Connections:
| Connection | Size |
|---|---|
| Suction Port | 2 inch / 78 mm OD |
| Discharge Port | 2 inch / 78 mm OD |
| Union Type | Standard spa unions (sold separately if required) |
Electrical Connections:
The VP200 comes pre-fitted with a 3-metre, 3-core cable with AMP plug connector. The three wires are:
- 1 × Live (Red, Brown or Black) – high speed
- 1 × Neutral (Blue or White)
- 1 × Earth (Green/Yellow)
If your control system uses a different connector, the cable can be swapped from your existing pump.
Installation Notes:
⚠️ Pump must be installed below water level (flooded suction) or primed before operation
⚠️ Never run pump dry – causes immediate seal and motor damage
⚠️ Ensure proper bonding to earth as per BS 7671 regulations
⚠️ This is a single-speed pump – runs at full power when activated
⚠️ Check all union connections for leaks before powering on
🔧 Maintenance Guide
Routine Maintenance:
| Task | Frequency | Notes |
|---|---|---|
| Check for leaks | Monthly | Inspect around mechanical seal and unions |
| Inspect unions | Monthly | Hand-tighten if loose; do not overtighten |
| Clean strainer/filter | As needed | Ensure adequate water flow to pump |
| Check amperage draw | Annually | Should match rated value (7.0A) |
| Inspect motor vents | Quarterly | Keep cooling fins clear of debris |
| Check mounting bolts | Quarterly | Tighten if loose to prevent vibration |
Warning Signs – Consider Pump Replacement If:
- Unusual noise (grinding, screeching, or humming)
- Water leaking from mechanical seal area
- Motor trips circuit breaker repeatedly
- Noticeably reduced water flow or jet pressure
- Motor runs excessively hot
- Pump fails to start or runs intermittently
Mechanical Seal Information:
📍 Seal Location: Between wet end and motor
📍 Seal Type: Mechanical shaft seal
⚠️ Replace seal at first sign of leakage to prevent motor damage
🛁 Ideal Applications
| Application | Suitability | Notes |
|---|---|---|
| ♨️ Hot tub jet pump | ✅ Excellent | Primary application – dedicated jet power |
| ♨️ Spa booster pump | ✅ Excellent | Additional pump for extra jet zones |
| 🛁 Whirlpool bath | ✅ Good | Suitable for whirlpool jet systems |
| 💦 Swim spa jets | ✅ Good | Can power swim spa jet systems |
Not Suitable For:
- 24-hour circulation duty (use circulation pump instead)
- Filtration cycles (no low-speed option)
- Heating circulation (requires separate circulation pump)
❓ Frequently Asked Questions
Q: What is the difference between the VP200 and VP200-II?
A: The VP200 is a single-speed pump running only at high speed for jet operation. The VP200-II is a dual-speed pump that also has a low-speed setting for quiet filtration and heating. Choose VP200 if you have a separate circulation pump, or VP200-II if you need one pump for both jets and circulation.
Q: What horsepower is this pump?
A: The Vian Power VP200 is rated at 2.0 HP (1.5 kW) single speed at 2900 RPM.
Q: Will this pump fit my hot tub?
A: This pump has 2-inch suction and discharge ports (78mm thread OD). Measure your existing pump’s dimensions and port sizes to confirm compatibility. Contact Parts4Tubs for assistance.
Q: What voltage does this pump require?
A: 230V / 50Hz single-phase supply, which is standard UK mains voltage. All electrical installation must be completed by a qualified electrician.
Q: How much power does this pump draw?
A: The VP200 draws 7.0A at full load, consuming 1.5 kW when running.
Q: What size are the ports?
A: Both suction and discharge ports are 2-inch with 78mm outer thread diameter.
Q: Can I use this for filtration?
A: No, this is a single-speed pump designed for jet operation only. For filtration, you need either a separate circulation pump or a dual-speed pump like the VP200-II.
Q: What cable connection does this pump use?
A: The pump comes with a 3-metre, 3-core cable pre-fitted with an AMP plug connector.
✅ Why Choose the Vian Power VP200
✅ Maximum Jet Power – Full 2.0 HP dedicated to driving massage jets
✅ Simple & Reliable – Single-speed design with fewer components to fail
✅ Strong Performance – 2900 RPM delivers powerful, consistent water flow
✅ Easy Installation – Pre-wired with AMP plug and standard 2″ connections
✅ Broad Compatibility – Standard 2″ connections for most spa systems
✅ Quality Construction – Robust motor with upgraded mechanical seals
🤝 Why Buy From Parts4Tubs
✅ UK-based company with local customer support and technical expertise
✅ Fast UK delivery to get your hot tub back up and running quickly
✅ Expert advice from spa specialists who understand your needs
✅ Competitive pricing on genuine quality spa components
✅ Full warranty support for peace of mind
✅ Easy returns within 30 days if you need to exchange
✅ Replacement seals and parts available for ongoing maintenance
♨️ Summary
The Vian Power VP200 is a powerful 2.0 HP (1.5 kW) single-speed jet pump designed for hot tub and spa massage applications. Running at 2900 RPM with 7.0A current draw at 230V/50Hz, this dedicated jet pump delivers strong water flow for satisfying hydrotherapy performance. With 2-inch connections (78mm thread OD) and pre-wired 3-metre cable with AMP plug, the VP200 is an excellent choice for Chinese-manufactured spas requiring a reliable single-speed jet pump. Perfect for spas with separate circulation pumps or as a booster pump for additional jet zones. Order today for powerful, reliable jet performance.


