💦 Vian Power VP300-II Spa Pump – 3.0 HP Dual Speed
Maximum power dual-speed pump for powerful jets and quiet filtration
💧 Product Overview
The Vian Power VP300-II is a high-performance dual-speed pump designed for spas and hot tubs requiring maximum jet power combined with efficient filtration capabilities. Delivering an impressive 3.0 HP (2.2 kW) at high speed, this pump provides exceptional water flow for demanding jet systems while offering quiet, energy-efficient low-speed operation for filtration and heating cycles.
The dual-speed design allows the pump to serve dual purposes: high speed at 2900 RPM drives your massage jets with powerful, satisfying pressure, while low speed at 1450 RPM provides gentle circulation for filtration and heating. This versatility makes the VP300-II an excellent choice for larger spas requiring a single pump solution with maximum power.
With 2-inch plumbing connections (78mm OD) and a pre-wired 4-core cable with AMP plug, the VP300-II is compatible with Chinese spa models, Coasts Spas, and certain Jacuzzi systems.
⭐ Key Features
✅ Powerful 3.0 HP Motor – 2.2 kW output delivers maximum jet pressure
✅ Dual Speed Operation – High speed for jets, low speed for quiet filtration
✅ High Speed: 2900 RPM – Maximum power for massage jet performance
✅ Low Speed: 1450 RPM – Quiet, energy-efficient circulation
✅ 2-Inch Plumbing – 78mm OD male threaded connections
✅ Pre-Wired with AMP Plug – 3-metre, 4-core cable for easy connection
✅ 40 µF Capacitor – Reliable motor starting
✅ Compact Design – 435 × 200 × 235 mm fits most spa cabinets
🔩 Technical Specifications
| Specification | Value |
|---|---|
| Pump Type | Dual-Speed Massage Pump |
| Motor Power | 3.0 HP / 2.2 kW |
| Speed Settings | 2 Speed |
| High Speed RPM | 2900 |
| Low Speed RPM | 1450 |
| Amperage (High Speed) | 10 A |
| Amperage (Low Speed) | 3.2 A |
| Capacitor | 40 µF |
| Plumbing Size | 2 inch / 78 mm OD (male threaded) |
| Dimensions (L × W × H) | 435 × 200 × 235 mm |
| Cable Length | 3 metres |
| Cable Type | 4-core with AMP plug |
⚡ Electrical Requirements
| Electrical Specification | Requirement |
|---|---|
| Frequency | 50 Hz |
| Phase | Single Phase |
| Full Load Amps (High Speed) | 10 A |
| Full Load Amps (Low Speed) | 3.2 A |
| Capacitor | 40 µF |
| Cable Configuration | 4-core (2 × Live, Neutral, Earth) |
⚠️ IMPORTANT ELECTRICAL SAFETY NOTICE:
All electrical work must be carried out by a qualified electrician in accordance with UK wiring regulations (BS 7671). Hot tubs require RCD protection (30mA). The pump must be properly bonded to the spa’s earthing system.
⚙️ Compatibility Guide
This Pump:
📍 Type: Dual-Speed Massage Pump
📍 Plumbing: 2 inch (78mm thread OD)
📍 Electrical: 3-metre, 4-core cable with AMP plug
Compatible With:
- Chinese spa models
- Coasts Spas
- Certain Jacuzzi systems
- Spas requiring 3.0 HP dual-speed jet pump
- Systems with standard 2″ plumbing connections
🔌 Installation Requirements
Mounting:
| Requirement | Specification |
|---|---|
| Mounting Position | Horizontal |
| Base | Solid, level, vibration-dampening surface |
| Ventilation | Adequate clearance for motor cooling |
| Access | Sufficient space for maintenance |
Plumbing Connections:
| Connection | Size |
|---|---|
| Plumbing Size | 2 inch / 78 mm OD (male threaded) |
Electrical Connections:
The VP300-II comes pre-fitted with a 3-metre, 4-core cable with AMP plug connector. The four wires are:
- 1 × Live – high speed
- 1 × Live – low speed
- 1 × Neutral
- 1 × Earth
Installation Notes:
⚠️ Pump must be installed below water level or primed before operation
⚠️ Never run pump dry – causes seal and motor damage
⚠️ Ensure proper bonding to earth as per BS 7671 regulations
⚠️ Check all union connections for leaks before powering on
🔧 Maintenance Guide
Routine Maintenance:
| Task | Frequency | Notes |
|---|---|---|
| Check for leaks | Monthly | Inspect around seal and unions |
| Inspect unions | Monthly | Hand-tighten if loose |
| Clean strainer/filter | As needed | Ensure adequate water flow |
| Check amperage draw | Annually | Should match rated values |
| Inspect motor vents | Quarterly | Keep clear of debris |
| Check mounting bolts | Quarterly | Tighten if loose |
Warning Signs – Consider Pump Replacement If:
- Unusual noise (grinding, screeching, or humming)
- Water leaking from seal area
- Motor trips circuit breaker repeatedly
- Noticeably reduced water flow
- Motor runs excessively hot
- Low speed or high speed fails to operate
🛁 Ideal Applications
| Application | Suitability | Notes |
|---|---|---|
| ♨️ Hot tub jet pump | ✅ Excellent | Maximum high speed power for massage jets |
| ♨️ Spa filtration | ✅ Excellent | Low speed for quiet circulation |
| 🛁 Whirlpool bath | ✅ Good | Suitable for large whirlpool systems |
❓ Frequently Asked Questions
Q: What horsepower is this pump?
A: The Vian Power VP300-II is rated at 3.0 HP (2.2 kW) at high speed.
Q: Is this a single or dual speed pump?
A: This is a dual-speed pump with high speed (2900 RPM) for jets and low speed (1450 RPM) for filtration.
Q: What are the amperage ratings?
A: High speed draws 10A, low speed draws 3.2A.
Q: What size are the plumbing connections?
A: 2-inch with 78mm outer thread diameter (male threaded).
Q: What cable does this pump have?
A: 3-metre, 4-core cable with AMP plug connector.
Q: What is the capacitor size?
A: 40 µF.
Q: Will this fit my hot tub?
A: Check your existing pump’s dimensions and port sizes. This pump measures 435 × 200 × 235 mm with 2-inch connections. Contact Parts4Tubs for compatibility assistance.
Q: What hot tub brands use this pump?
A: Compatible with Chinese spa models, Coasts Spas, and certain Jacuzzi systems.
✅ Why Choose the Vian Power VP300-II
✅ Maximum Power Output – 3.0 HP for the most demanding jet systems
✅ Dual Speed Versatility – Jets and filtration from one pump
✅ Energy Efficient – Low speed uses only 3.2A for circulation
✅ Easy Installation – Pre-wired with AMP plug
✅ Proven Compatibility – Used in major spa brands
✅ Compact Size – Fits standard spa cabinets
🤝 Why Buy From Parts4Tubs
✅ UK-based company with local customer support
✅ Fast UK delivery to minimise spa downtime
✅ Expert advice from spa specialists
✅ Competitive pricing on quality components
✅ Full warranty support for peace of mind
✅ Easy returns within 30 days
♨️ Summary
The Vian Power VP300-II is a powerful 3.0 HP (2.2 kW) dual-speed massage pump for hot tub and spa applications requiring maximum jet power. With high speed at 2900 RPM (10A) for jet operation and low speed at 1450 RPM (3.2A) for filtration, this versatile pump handles both functions efficiently. Featuring 2-inch plumbing connections (78mm OD), 40 µF capacitor, and pre-wired 3-metre 4-core cable with AMP plug, the VP300-II is compatible with Chinese spa models, Coasts Spas, and certain Jacuzzi systems. Compact dimensions of 435 × 200 × 235 mm ensure easy fitment. Order today for maximum dual-speed performance.



