🌿 Energy Guard 500M GeoBubble Solar Cover – 16ft x 36ft | Eliminate Algae, Slash Costs by £600+ Annually

Save £600+ Per Year While Ending Your Algae Problems Forever*

The Only Solar Cover That Pays for Itself in Under 12 Months

Tired of battling green water? Fed up with constantly rebalancing chemicals? Watching your energy bills climb every swimming season? The Energy Guard 500M GeoBubble Solar Cover solves all three problems simultaneously—while paying for itself in less than a year through dramatic reductions in chemical, heating, and water costs.

✅ Your Complete Savings Breakdown (Average 16ft x 36ft Pool)*

• Chemical Costs: Save up to £180/year (70% reduction, up to 11kg less chlorine)
• Heating Costs: Save up to £400/year (50%+ energy reduction, up to 5,000 kWh)
• Water Bills: Save up to £80/year (32,000 litres eliminated evaporation = 400 baths)
• Pump/Filtration: Save up to £100/year (50% less runtime needed)

Total Annual Savings: £600-£760*

Typical Payback Period: 8-14 months (based on average UK pool running costs)

🎯 The Triple-Threat Problem Every Pool Owner Faces

Problem #1: The Endless Algae Battle

You’ve been there. Water goes from crystal clear to murky green seemingly overnight. You shock the pool, add more chemicals, run the filter for hours… and three days later, it’s back. You’re spending £15-30 weekly on chemicals during peak season, and it never seems enough.

Problem #2: Heating Costs That Never Stop Climbing

Your pool loses heat every single night—and every degree lost costs money to replace. An uncovered pool can lose 3-5°C overnight through evaporation and radiation. That’s £30-50 weekly just to maintain comfortable swimming temperature, especially during those cooler UK evenings.

Problem #3: The Invisible Water Drain

Without realizing it, your pool loses approximately 88 litres of water EVERY DAY through evaporation alone. That’s more than a bathtub daily, quietly inflating your water bills and requiring constant chemical rebalancing as concentrations change.

What if one solution eliminated all three problems?

🌟 Introducing Energy Guard: The Only Solar Cover With Selective Transmission Technology

What Makes Energy Guard Different?

Unlike standard solar covers that simply trap heat, Energy Guard uses revolutionary Selective Transmission Technology—a scientifically-engineered dark grey surface that blocks the specific wavelengths of light algae need for photosynthesis, while still allowing beneficial solar energy to heat your water.

Think of it as “smart sunglasses” for your pool.

The Science That Saves You Money

The innovation lies in the dual-layer design:

🔹 Dark Grey Top Surface: Absorbs solar heat efficiently (similar to black surfaces) and blocks 99% of the light spectrum algae requires for photosynthesis

🔹 Black Underside: Creates a complete light barrier while conducting absorbed heat directly into the water below

🔹 500M GeoBubble Technology: Patented bubble design with no weak points, lasting 25% longer than conventional covers

Result: You get solar heating gains WITHOUT the algae explosion that typically comes with warmer water.

💰 How Energy Guard Saves You £600+ Every Year

1️⃣ Chemical Savings: Up to £180/Year (70% Reduction)

The Traditional Way (Uncovered Pool):

• Weekly chlorine: £8-15 during summer months (May-September = 20 weeks)
• pH balancers: £3-5 weekly fighting algae-induced pH swings
• Algaecide treatments: £15-25 monthly
• Shock treatments: £10-20 monthly
• Annual chemical costs: £250-£350

With Energy Guard:

• Algae physically blocked (no photosynthesis possible)
• 98% evaporation elimination (chemicals stay in water, not air)
• 90% of outdoor chlorine normally lost to UV photolysis—dramatically reduced
• Actual testing: Up to 11kg less chlorine needed annually
• Annual chemical costs: £75-£105 (70% reduction)

Annual Savings: £175-£245

2️⃣ Heating Savings: Up to £400/Year (50%+ Energy Reduction)

The Hidden Cost of Heat Loss:

An uncovered 16ft x 36ft pool loses approximately 10,000 kWh annually through:

• Evaporation: 70% of total heat loss (heat of vaporization is enormous)
• Radiation: 20% of heat loss (especially overnight)
• Convection: 10% of heat loss (wind and air movement)

At current UK electricity rates (£0.24/kWh average for heat pumps):

• Uncovered pool heating: £800-£1,000/year
• With Energy Guard: £400-£500/year (50%+ reduction = 5,000 kWh saved)

How Energy Guard Achieves This:

• Eliminates 98%+ of evaporation (removing the biggest heat loss factor)
• 500-micron thickness provides superior insulation
• Dark surface absorbs solar energy, warming water up to 4°C
• GeoBubble air pockets create an insulating barrier

Annual Savings: £350-£450

3️⃣ Water Savings: Up to £80/Year (32,000 Litres)

The Evaporation You Can’t See:

Your 16ft x 36ft pool loses approximately:

• 88 litres per day through evaporation (based on UK climate data)
• 32,000 litres per year = approximately 400 bathtubs full
• Higher in windy conditions or during heat waves

Cost Impact:

• Average UK water rates: £2.50 per 1,000 litres (combined supply + wastewater)
• Annual water loss cost: £80

With Energy Guard: 98%+ evaporation eliminated = £75-£80 saved annually

4️⃣ Pump & Filtration Savings: Up to £100/Year

Why You’ll Run Your Pump 50% Less:

When algae is physically blocked rather than chemically controlled:

• Less organic matter in water = cleaner filter, easier circulation
• Clearer water requires less mechanical filtration
• Reduced pump runtime = lower electricity consumption

Typical Scenario:

• Uncovered pool: 8-12 hours daily filtration (fighting algae and debris)
• With Energy Guard: 4-6 hours daily (maintenance circulation only)

Energy Savings:

• Average pump: 1.5 kW
• 4 hours less daily × 180 days = 1,080 kWh saved
• At £0.24/kWh = £95-£130 saved annually

📊 Total Cost of Ownership Comparison: 3-Year Outlook

Cost Category	Without Cover (3 Years)	With Energy Guard (3 Years)	Savings
Chemicals	£900	£270	£630
Heating Energy	£2,700	£1,350	£1,350
Water	£240	£12	£228
Pump Energy	£390	£195	£195
Cover Cost	£0	-£595 (one-time)	–
TOTAL	£4,230	£2,422	£1,808

Break-Even Point: 10-12 months 3-Year ROI: 304%

🧪 University-Proven Performance: Real Research, Real Results

Independent Testing by UK Universities

Energy Guard isn’t marketing hype—it’s backed by rigorous scientific research conducted in collaboration with two UK universities.

10-Day Comparative Study:

• Test Setup: Two identical outdoor pools, simulated use, no chemical treatment, no filtration
• Pool A: Standard solar gain cover
• Pool B: Energy Guard cover

Results:

• Day 4: Pool A showing visible algae growth
• Day 7: Pool A completely green
• Day 10: Pool B remained algae-free

Extended Test: Continued for 2 additional months—Pool B remained algae-free for entire 80-day period without chemicals or filtration

Why This Matters for You

This isn’t a slight improvement—it’s a fundamental change in how you maintain your pool. The ability to prevent algae through physical light blocking (rather than chemical warfare) means:

✅ Predictable maintenance costs (no emergency algae treatments) ✅ Safer swimming conditions (fewer harsh chemicals needed) ✅ More swim time, less maintenance time ✅ Confidence that your pool will be ready whenever you want to use it

🔬 GeoBubble Technology: 25% Longer Lifespan

The Problem with Traditional Bubble Covers

Standard bubble covers were originally designed for packaging, not swimming pools. They have critical weaknesses:

❌ Thin points at bubble tips (stress concentration points) ❌ Sharp corners where material degrades fastest ❌ No room for thermal expansion (leads to stress fractures) ❌ Weak joining points between bubbles

Result: Traditional covers typically last 2-3 seasons before becoming brittle and failing.

The GeoBubble Solution

Energy Guard uses patented GeoBubble technology with a scientifically optimized shape:

✅ Joined-waist design: Two bubbles connected at the widest point (no thin areas) ✅ No sharp corners: Smooth, flowing geometry distributes stress evenly ✅ 50% thicker overall: More material at every point ✅ Expansion room: Internal space allows for thermal expansion without stress ✅ UV stabilized material: Advanced additive package resists UV degradation

Result: GeoBubble covers last 25% longer than conventional designs—typically 4-5+ seasons of reliable performance.

What This Means for Your Wallet

Traditional Cover:

• Lifespan: 3 years
• Cost per year: £130-£165
• 10-year total: £433-£550 (3+ replacements)

Energy Guard GeoBubble:

• Lifespan: 4-5 years
• Cost per year: £95-£119
• 10-year total: £238-£298 (2 replacements)

Additional savings from longer lifespan: £135-£252 over 10 years

📏 Technical Specifications: Energy Guard 500M

Specification	Details
Dimensions	16ft × 36ft (4.88m × 10.97m)
Thickness	500 microns (0.5mm)
Technology	GeoBubble with Selective Transmission
Top Surface	Opaque dark grey (solar heat absorption + light blocking)
Underside	Black (complete light barrier)
Material	UV-stabilized LDPE (Grade 4 recyclable)
Bubble Design	Patented joined-waist GeoBubble (no weak points)
Heat Retention	Eliminates 98%+ evaporation, 50%+ energy savings
Algae Inhibition	Blocks photosynthesis-required light wavelengths
Chemical Reduction	Up to 70% (up to 11kg chlorine saved annually)
Temperature Gain	Up to 4°C solar heating in optimal conditions
Lifespan	25% longer than traditional covers (4-5+ seasons typical)
Warranty	6-year pro-rata (UK & Ireland)*
Bubble Orientation	Bubbles face down (toward water)
Manufacturing	Made to order (2-3 week lead time)
Recyclability	100% recyclable LDPE

*Warranty void if water temperature exceeds 29°C or SPATA chemical/TDS standards not maintained

🆚 Energy Guard vs. Other Solar Covers: The Clear Winner

How Energy Guard Compares to Alternatives

Feature	Energy Guard 500M	Standard Blue/Clear 400M	Sol+Guard 500M	Gold 600M
Algae Prevention	⭐⭐⭐⭐⭐ Excellent	⭐ Poor (encourages algae)	⭐⭐ Moderate	⭐⭐ Moderate
Heat Retention	⭐⭐⭐⭐ Very Good	⭐⭐⭐ Good	⭐⭐⭐ Good	⭐⭐⭐⭐⭐ Excellent
Solar Heating	⭐⭐⭐⭐ Good	⭐⭐⭐⭐ Very Good	⭐⭐⭐⭐⭐ Excellent	⭐⭐⭐ Moderate
Chemical Savings	⭐⭐⭐⭐⭐ Up to 70%	⭐⭐ Up to 30%	⭐⭐⭐ Up to 35%	⭐⭐⭐ Up to 40%
Lifespan	⭐⭐⭐⭐⭐ 4-5 years	⭐⭐ 2-3 years	⭐⭐⭐⭐⭐ 4-5 years	⭐⭐⭐⭐⭐ 5-6 years
Best For	Algae-prone pools	Budget-conscious	Maximum solar gain	Premium heat retention
Typical Price

When to Choose Energy Guard Over Alternatives

Choose Energy Guard if you:

• ✅ Battle recurring algae problems (green water, slimy surfaces)
• ✅ Want the lowest possible chemical costs
• ✅ Prefer natural/physical algae control over heavy chemical use
• ✅ Have hard water or struggle with pH balance
• ✅ Experience filter blockages from organic matter
• ✅ Want excellent heat retention WITH algae prevention
• ✅ Live in an area with variable weather (algae thrives in temperature swings)
• ✅ Have children or pets (lower chemical exposure preferred)

Consider Sol+Guard 500M if:

• Your pool rarely has algae issues AND maximum solar heating is priority
• You have excellent chemical balance discipline
• Pool is heavily shaded and needs maximum UV penetration

Consider Gold 600M if:

• Absolute maximum heat retention is priority (not algae prevention)
• You have a heated pool and want lowest possible energy bills
• Algae has never been an issue for your pool

❓ Common Questions About Energy Guard

Will Energy Guard really stop my algae problems?

Yes—when used correctly. The university testing proved Energy Guard prevented algae growth for 80+ days without any chemical treatment or filtration. However, for best results:

✓ Keep the cover on when pool is not in use (blocks light = no photosynthesis) ✓ Maintain basic water chemistry (pH 7.2-7.6, minimal sanitizer) ✓ Clean cover surface monthly (prevent debris buildup)

If your pool currently has algae, treat it first, then use Energy Guard to prevent recurrence. The cover prevents algae growth but doesn’t kill existing algae.

How much time will this save me on pool maintenance?

Approximately 3-5 hours per week during swimming season:

• Chemical testing & balancing: Reduced from 4-5× weekly to 1-2× weekly (saves 1.5 hours)
• Skimming debris: Reduced by 90% (saves 1-2 hours)
• Algae treatment & scrubbing: Essentially eliminated (saves 1-2 hours monthly during algae outbreaks)
• Filter cleaning: 50% less frequent (saves 0.5 hours weekly)

Many customers report maintenance going from “daily chore” to “weekly check-in.”

Can I still heat my pool while the cover is on?

Absolutely—and you should! Running your heater with Energy Guard in place is actually the most efficient approach:

✅ Heat retention: The cover traps heat, so your heater reaches target temperature faster ✅ Reduced runtime: Less energy wasted = lower costs ✅ Solar boost: The dark surface adds 2-4°C of “free” solar heating ✅ Stable temperature: Pool maintains temperature overnight with minimal reheating needed

The cover also allows safe operation of your pool pump and filtration system.

Will this work with my pool roller/reel system?

Yes. Energy Guard is compatible with all standard pool roller systems. The 500M thickness provides an ideal balance:

• Thick enough: For durability and heat retention
• Flexible enough: To roll and unroll smoothly without bunching
• Lightweight enough: For easy handling (one person can manage it)

If you don’t have a roller system, we highly recommend investing in one—it makes daily use effortless and extends cover lifespan by preventing dragging and folding damage.

How does the 6-year warranty work?

Energy Guard includes a 6-year pro-rata warranty (UK & Ireland):

Coverage includes:

• Manufacturing defects
• Premature material degradation
• Bubble separation or delamination

Warranty is void if:

• Pool water exceeds 29°C (use a separate cover for heated spas)
• Chemical levels exceed SPATA standards (covers aren’t indestructible against chemical abuse)
• TDS (Total Dissolved Solids) exceeds recommended levels

Pro-rata means: If your cover fails in year 3, you receive partial credit toward a replacement based on remaining warranty period.

Pro tip: Keep your pool chemistry logs and water test records—this protects your warranty and helps diagnose any issues.

How do I install and store Energy Guard?

Installation (5 minutes):

1. Unroll the cover across your pool surface
2. Bubbles face DOWN (toward the water)—this allows trapped air to heat and transfer warmth directly into the pool
3. Trim if needed (if you ordered slightly oversized for perfect fit)
4. Secure edges (optional weighted edges or clips prevent wind lift)

Daily Use:

• Covering: Pull cover across pool using roller system (30 seconds)
• Uncovering: Roll cover off before swimming (30 seconds)

Storage (end of season):

1. Clean the cover: Rinse with hose, mild soap if needed, let dry completely
2. Roll or fold carefully: Avoid sharp creases that can create weak points
3. Store in cool, dry location: Garage, shed, or cover bag (out of direct sunlight)
4. Don’t store wet: Mold and mildew can develop
5. Keep away from chemicals: Concentrated pool chemicals can damage the material

Winter note: Energy Guard is NOT designed for winter storage. Replace with a proper winter cover (November-March in UK), then bring Energy Guard back out in spring for swimming season.

What size do I need?

Energy Guard should match or slightly exceed your pool’s waterline dimensions:

🎯 This listing: 16ft × 36ft (4.88m × 10.97m)

Ideal for pools:

• Exact: 16ft × 36ft
• Slightly smaller: 15ft × 35ft (trim excess)
• Rectangular pools in this size range

Need a different size? Energy Guard is available in:

• Standard sizes: 12ft-20ft width, 24ft-40ft length
• Custom sizes: Made-to-measure available for non-standard pools

Not sure? Use our [pool cover calculator] or measure:

1. Pool length (longest point)
2. Pool width (widest point)
3. Add 6-12 inches for slight overlap (helps with wind protection)

Custom orders: Typically add 1-2 weeks to lead time but ensure perfect fit.

Will the dark color make my pool hotter than I want?

Unlikely to be an issue in the UK climate, but here’s the science:

Energy Guard can raise water temperature up to 4°C through solar absorption—but this is actually beneficial:

✅ April-June: Extends your swimming season earlier (comfortable water sooner) ✅ July-August: Provides “free” heat, reducing heater runtime ✅ September-October: Extends season later (maintains warmth longer)

If your pool does get too warm (rare in UK):

• Simply remove the cover during peak sun hours (11am-3pm)
• Use your pool’s water features (fountains, waterfalls) for evaporative cooling
• This is generally only a concern for pools heated above 28°C already

Most UK pool owners want more heat, not less—Energy Guard delivers exactly that while preventing algae (unlike clear covers which heat water but encourage algae blooms).

How does this compare to a liquid solar cover?

Energy Guard is vastly superior:

Feature	Energy Guard	Liquid Solar Cover
Heat retention	98%+ evaporation blocked	30-50% evaporation blocked
Algae prevention	Yes (physical light blocking)	No benefit
Debris protection	Complete barrier	None
Lifespan	4-5 years (one-time purchase)	Continuous repurchasing needed
Effectiveness	Works 24/7 when in place	Degrades with filtration/swimming
Cost	£595 (one-time)	£60-90/year (ongoing)
Effort	30 seconds to cover/uncover	Constant reapplication

Bottom line: Liquid covers are marginally better than nothing, but nowhere near as effective or cost-efficient as a physical cover.

🌍 Environmental Benefits: Good for Your Wallet, Great for the Planet

Your Pool’s Carbon Footprint—And How to Shrink It

An average uncovered UK swimming pool generates approximately 3-4 tonnes of CO₂ annually:

• 2.5 tonnes from heating energy (gas, electric, heat pump)
• 0.5 tonnes from pump/filtration electricity
• 0.3 tonnes from chemical manufacturing and transport
• 0.2 tonnes from water treatment and supply

With Energy Guard, you can cut this by 50-60%:

🌱 Energy reduction: 5,000 kWh saved = 1.3 tonnes CO₂ reduced annually 🌱 Chemical reduction: 11kg less chlorine = 0.15 tonnes CO₂ saved (manufacturing impact) 🌱 Water conservation: 32,000 litres = 0.08 tonnes CO₂ saved (treatment & pumping) 🌱 Pump savings: 1,080 kWh = 0.28 tonnes CO₂ reduced

Total annual carbon reduction: ~1.8 tonnes CO₂

What Does 1.8 Tonnes of CO₂ Mean?

That’s equivalent to:

• 🚗 Driving 7,500 miles in an average car
• ✈️ One round-trip flight London to New York (per passenger)
• 🌳 The annual CO₂ absorption of 82 mature trees

Over the 4-5 year lifespan of your Energy Guard cover, you’ll prevent 7-9 tonnes of CO₂ emissions—equivalent to taking a car off the road for nearly a year.

Plus: 100% Recyclable at End of Life

Energy Guard is manufactured from Grade 4 LDPE (Low-Density Polyethylene), which is fully recyclable. When your cover eventually reaches end of life:

♻️ Check with local recycling centers (many accept LDPE) ♻️ Some pool suppliers offer take-back programs ♻️ Material can be reprocessed into new plastic products

💎 Why Choose Parts4Tubs for Your Energy Guard Cover?

Made-to-Order Quality

Every Energy Guard cover is manufactured specifically for your order:

✅ Fresh from production: Not sitting in a warehouse for months ✅ Quality checked: Each cover inspected before shipping ✅ Custom sizing available: Perfect fit for non-standard pools ✅ Latest GeoBubble technology: You get the most current design improvements

Lead time: 2-3 weeks (direct from manufacturer)—worth the brief wait for custom-made quality.

Expert Support & Guidance

Buying a £500+ pool accessory online can feel risky. We’re here to help:

📞 Pre-purchase advice: Unsure if Energy Guard is right for your pool? We’ll discuss your specific situation (algae issues, pool chemistry, budget, goals) and recommend the best cover for YOUR needs—even if it’s not the most expensive option.

📐 Sizing assistance: Confused about measurements? We’ll help you get it right the first time.

🛠️ Installation guidance: Questions about bubble orientation, trimming, or roller compatibility? We’ve installed hundreds of covers and share that knowledge freely.

🔧 Maintenance tips: How to extend your cover’s lifespan, cleaning schedules, storage best practices.

Competitive Pricing

Energy Guard covers represent a significant investment—you deserve fair pricing:

💰 Transparent costs: No hidden fees or surprise shipping charges 💰 Price-match consideration: Found it cheaper elsewhere with comparable service? Let’s discuss. 💰 Volume discounts: Multiple covers or commercial installation? We can help.

The Parts4Tubs Difference

We’re not just selling you a product—we’re helping you solve pool maintenance problems. Our success comes from your satisfaction:

⭐ Real customer reviews: See what other UK pool owners experienced ⭐ Long-term relationship: We’re here when you need advice 2-3 years from now ⭐ Problem-solving focus: We help you address the root causes, not just sell covers

🛒 Investment Summary: Is Energy Guard Right for You?

The Numbers Don’t Lie

One-Time Investment: £595 (16ft × 36ft size)

Annual Savings:

• Chemicals: £175-£245
• Heating: £350-£450
• Water: £75-£80
• Pump/filtration: £95-£130

Total Annual Savings: £695-£905

Payback Period: 8-12 months

3-Year Total Savings: £1,490-£2,120 (after cover cost) 5-Year Total Savings: £2,880-£3,930 (using one cover)

You Should Buy Energy Guard If:

✅ You’re spending £20-30+ weekly on pool chemicals during summer ✅ Your pool has recurring algae problems (any shade of green) ✅ You’re frustrated with constant pH rebalancing ✅ Heating costs are £40-80+ monthly during swimming season ✅ You want lower chemical exposure for family/pets ✅ You’d rather spend time swimming than maintaining ✅ You plan to keep your pool for 3+ more years ✅ You value proven, university-tested technology ✅ Environmental responsibility matters to you

You Should Wait/Consider Alternatives If:

❌ Your pool is perfect (never algae, heating costs under £30/month, no maintenance frustrations) ❌ You’re selling your house within 12 months (won’t reach payback) ❌ Your pool is very small (<10ft × 20ft)—smaller budget covers may suffice ❌ You have an indoor pool (foam covers more appropriate) ❌ You never use your pool (then why own one?—but seriously, a basic winter cover is sufficient)

The Bottom Line

If you’re spending £600+ annually on pool maintenance and heating, Energy Guard pays for itself within a year while dramatically reducing your workload. The choice isn’t really “should I buy this?” but rather “why am I still throwing money away without it?”

📋 Important Disclaimers & Assumptions

Savings Calculations Based On:

Standard Assumptions:

• Pool size: 4m × 8m (approximately 32m² surface area, 13ft × 26ft)
• Pool volume: 35,000-45,000 litres (9,250-11,900 gallons)
• Location: UK climate (average temperatures, rainfall, wind conditions)
• Season: May through September (5 months, approximately 150 days)
• Heating: Modern heat pump (SCOP 5-6) or gas heater
• Target temperature: 26-28°C (78-82°F)
• Cover usage: 70% of time during season (removed for swimming, covered otherwise)

Energy Assumptions:

• Electricity rates: £0.24-0.30/kWh (UK average, 2024-2025)
• Heat pump COP: 5.0 average across season
• Gas rates: £0.06-0.08/kWh (if gas heating)
• Uncovered pool heat loss: 10,000-12,000 kWh per season
• With Energy Guard: 50-60% reduction in heating energy needed

Chemical Assumptions:

• Chlorine costs: £8-12 per kg (granular or tablets)
• Uncovered pool chlorine consumption: 15-20 kg per season
• pH correctors: £30-50 per season (more frequent adjustments with algae)
• Algaecide: £15-25 per month during algae problems (June-August)
• With Energy Guard: 60-70% reduction in chemical consumption

Water Assumptions:

• UK water rates: £2.00-3.00 per 1,000 litres (combined supply + wastewater)
• Evaporation without cover: 3-4mm per day average (higher in hot/windy conditions)
• 32,000 litres annual loss based on 4m × 8m pool
• With Energy Guard: 98% evaporation eliminated

Individual Results Will Vary Based On:

• Actual pool size and volume
• Geographic location (southern UK = more sun = higher evaporation without cover)
• Local climate conditions (wind, humidity, temperature ranges)
• Cover usage discipline (more consistent coverage = higher savings)
• Water chemistry starting point (worse chemistry = higher initial savings potential)
• Heating system efficiency (older equipment = less overall savings potential)
• Energy rates in your area (higher rates = higher monetary savings)
• Swimming frequency (more use = less covered time = lower savings)
• Pool surroundings (trees/debris = additional cover benefits for cleaning time)

Warranty Conditions:

• 6-year pro-rata warranty applies to UK & Ireland purchases only
• Warranty void if pool water temperature exceeds 29°C
• Warranty void if SPATA chemical standards not maintained (very high or very low pH/chlorine)
• Warranty void if TDS (Total Dissolved Solids) exceeds manufacturer recommendations
• Normal wear and tear expected; warranty covers defects and premature failure

Performance Expectations:

• Algae prevention requires cover to be in place during daylight hours (algae needs light)
• Solar heating gains depend on sun exposure (shaded pools receive less solar benefit)
• Chemical reduction assumes proper baseline water chemistry
• Energy savings assume cover is used consistently throughout season
• University testing conducted under controlled conditions; real-world results depend on usage patterns

These disclaimers ensure transparency in our savings claims. The figures represent typical scenarios based on extensive research and real customer data. Your actual results may exceed or fall short of these estimates depending on your specific circumstances. We encourage you to track your costs before and after Energy Guard installation to calculate your personal ROI.

🚀 Ready to Slash Your Pool Costs by £600+ Per Year?

Here’s What Happens Next:

1️⃣ Place Your Order Your 16ft × 36ft Energy Guard cover is made to order specifically for you—ensuring fresh materials and quality construction.

2️⃣ Manufacturing (2-3 Weeks) Your cover is manufactured using the latest GeoBubble technology, with UV-stabilized materials and quality inspection.

3️⃣ Direct Delivery to Your Door Ships directly from manufacturer with tracking information.

4️⃣ Simple Installation Unroll, place bubbles-down, secure edges—you’ll be up and running in 10 minutes.

5️⃣ Start Saving Immediately From day one, you’re eliminating evaporation, blocking algae-causing light, and retaining heat.

6️⃣ Watch Your Costs Plummet Within the first month, you’ll notice reduced chemical consumption and lower heating bills. By the end of the season, most customers have saved £400-600.

7️⃣ Enjoy 4-5 Seasons of Performance GeoBubble technology ensures your cover delivers year after year—most customers use the same cover for 4-5+ swimming seasons.

Investment Protection: Our Commitment to You

✅ 6-Year Pro-Rata Warranty: Manufacturing defects covered ✅ Expert Support: Pre-purchase advice, installation guidance, maintenance tips ✅ Fair Pricing: Transparent costs, no hidden fees ✅ Quality Materials: UV-stabilized, GeoBubble technology, 100% recyclable

Don’t Wait Another Season

Every day without Energy Guard costs you:

• £2.50-3.50 in unnecessary heating costs
• £0.75-1.25 in excessive chemical consumption
• £0.25 in wasted water
• 30-45 minutes in extra maintenance time

That’s £3.50-5.00 daily or £105-150 monthly during swimming season.

The longer you wait, the more money you waste. Your cover will have paid for itself by next summer—but only if you order it now.

📞 Questions? We’re Here to Help

Not quite ready to order? That’s perfectly fine. We’d rather you make an informed decision than a rushed one.

Get in touch if you:

• Want to discuss whether Energy Guard is the best option for your specific pool situation
• Need help measuring your pool for the perfect size
• Have questions about compatibility with your existing equipment (heaters, pumps, rollers)
• Want to understand the warranty terms in more detail
• Need advice on addressing current algae problems before installing the cover
• Want references from other UK pool owners who’ve used Energy Guard

We’re pool problem-solvers, not just product sellers. Our goal is helping you find the right solution—even if that means recommending a different cover or approach.

Energy Guard 500M GeoBubble Solar Cover – 16ft × 36ft Transform Your Pool from Money Pit to Money Saver

Made to order | 2-3 week delivery | 6-year pro-rata warranty | 100% recyclable