LX WP300-II Pump dual speed 3HP
£282.39
25 in stock
LX WP300-II Dual Speed Pump: Elevate Your Hot Tub Experience
Introduction
As an experienced hot tub enthusiast and parts supplier, I’m thrilled to introduce you to the LX WP300-II Dual Speed Pump. This versatile and powerful pump is designed to take your hot tub experience to new heights. Let me guide you through its features and benefits.
Product Overview
The LX WP300-II is a high-quality water pump that functions as both a jet pump and a 2-speed filtration pump. Manufactured by the reputable LX brand, this pump is renowned for its reliability and performance. With a robust 3 HP motor, it strikes the perfect balance between power and efficiency for your hot tub needs.
Key Features
1. Dual-Speed Functionality
The LX WP300-II’s standout feature is its dual-speed capability. This allows for optimal energy efficiency during regular filtration cycles and powerful performance when you need those invigorating jet massages.
2. Versatile Compatibility
I’ve found this pump to be incredibly versatile. It’s commonly used with various Chinese spa brands and Coasts spas (not to be confused with the American brand “Coast Spas”). Interestingly, it’s also compatible with some Jacuzzi models, making it an excellent replacement option for multiple hot tub brands.
3. Easy Installation
The pump comes with standard 2-inch plumbing connections, with the outside diameter of the male threaded wet end connection measuring approximately 78mm. This makes it interchangeable with other brands, simplifying the installation process for DIY enthusiasts or professional technicians.
4. Electrical Flexibility
The LX WP300-II comes with a plain 4-core cable attached, featuring 2 x Phase, 1 x Common Neutral, and Earth connections. This setup provides flexibility for various electrical configurations, ensuring compatibility with most hot tub systems.
Performance Specifications
Let’s dive into the technical details that make this pump stand out:
- Power: 230V, 50Hz
- Amperage: Low Speed: 3.2A / High Speed: 10.0A
- RPM: Low Speed: 1450 / High Speed: 2900
- Capacitor: 40 μf
These specs translate to efficient operation during filtration cycles and powerful performance when you need it most.
Dimensions and Installation
The compact design of the LX WP300-II makes it suitable for various hot tub configurations:
- Length: 435 mm
- Height: 235 mm
- Depth: 200 mm
Its size allows for easy installation in most hot tub cabinets, making it an excellent choice for replacements or upgrades.
Why Choose the LX WP300-II?
- Energy Efficiency: The dual-speed functionality allows for significant energy savings during regular filtration cycles.
- Powerful Performance: With 3 HP at your disposal, you’ll enjoy strong, invigorating jets when you want them.
- Versatility: Compatible with various hot tub brands, making it a go-to choice for replacements and upgrades.
- Reliability: LX is known for producing durable, long-lasting pumps that stand the test of time.
Specifications Table
| Specification | Detail |
|---|---|
| Type | Water pump / Jet pump, 2 speed filtration pump |
| Manufacturer | LX |
| Power Reference | 3 HP |
| Voltage | 230V |
| Frequency | 50 Hz |
| Amperage (Low/High) | 3.2A / 10.0A |
| RPM (Low/High) | 1450 / 2900 |
| Capacitor | 40 μf |
| Plumbing Connections | 2 inch (78mm approx. OD of male thread) |
| Electrical Connections | 4 core cable (2 x Phase, 1 x Common Neutral + Earth) |
| Dimensions (L x H x D) | 435mm x 235mm x 200mm |
Conclusion
The LX WP300-II Dual Speed Pump is a fantastic choice for hot tub owners seeking a reliable, powerful, and efficient pump. Whether you’re replacing an old pump or upgrading your current system, this model offers the perfect blend of performance and value. With its versatile compatibility and easy installation, it’s an excellent option for a wide range of hot tub setups.
The hot tub indistry doesnt make it easy for you when you are trying to match up the size of the unions (the part that screws your pipe work onto the pumps) Below you can see the physical sizes of the collars, and how they relate to the actual union size you need. So a measurement of 2.5", edge to edge on the collar of the pump is actually a 1.5" union - confusing - absolutely! If you are not sure, give me a shout!
How do I Replace a Hot Tub Pump?
Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.
Materials You'll Need:
- Replacement pump
- Pipe wrench
- Adjustable wrench
- Screwdriver
- Pipe sealant (thread tape or plumber's putty)
- PVC primer and cement (if you have PVC plumbing)
- Teflon tape (for threaded connections)
Procedure:
- Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.
- Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)
- Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.
- Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.
- Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.
- Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.
- Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.
- Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.
- Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.
- Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.
- Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.
- Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.
- Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.
- Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.
- Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.
Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.
How do I know what size hot tub pump I have?
Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:
- Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.
- Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.
- Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.
- Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.
- Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.
Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.
Related products
