Balboa Retrofit Kit 4.1: Revolutionize Your Hot Tub Experience

Introduction

As a dedicated hot tub enthusiast and spare parts specialist, I’m thrilled to introduce you to the Balboa Retrofit Kit 4.1, featuring the powerful combination of the Balboa GS510SZ control pack and the VL701S topside control. This kit is designed to breathe new life into your hot tub, offering unparalleled control and efficiency.

Product Overview

The Balboa Retrofit Kit 4.1 is the perfect solution for upgrading your hot tub’s electronic control system. With its advanced features and reliable performance, this kit will transform your spa experience, providing you with precise control over every aspect of your hot tub’s operation.

Key Features

• State-of-the-art Balboa GS510SZ electronic control pack
• User-friendly VL701S topside control panel
• Versatile pump compatibility
• Energy-efficient 3KW heater
• Advanced M7 technology for simplified installation and operation

Detailed Specifications

Specification	Detail
Control Pack Model	Balboa GS510SZ
Topside Control	Balboa VL701S
Power Requirements	230VAC, 50Hz
Pump Compatibility	Single or dual speed pump + circulation pump (if required)
Secondary Pump	Single speed
Air Blower	Optional (x1)
Heater	3KW (x1)
Ozone	x1
Light	x1, 12 volt
Radio/TV/AV	Connection point available
Heater Connections	2-inch socket heater union sleeves
Component Connections	Amp cables plug directly into PCB
Dimensions (Control Box)	Length: 500 mm (inc. heater), 320 mm (box only)
	Width: 120 mm
	Height: 270 mm
Topside Dimensions	187 mm x 83 mm
Topside Controls	Warm, Cool, Blower, Mode, Jets 1, Jets 2, Light

Documentation

• Balboa GS510SZ hot sheet
• VL701S cutout template
• VL series

Advanced M7 Technology

One of the standout features of this retrofit kit is the innovative M7 technology. This advanced system eliminates the need for additional sensors and flow switches in your tub. Instead, all monitoring and control functions are handled internally by two sensors within the control box. This simplifies installation, reduces potential points of failure, and ensures more accurate and responsive operation of your hot tub.

Easy Installation and Compatibility

The Balboa Retrofit Kit 4.1 is designed for straightforward installation, making it an ideal choice for both DIY enthusiasts and professional installers. The kit’s versatile design ensures compatibility with a wide range of hot tub models and configurations.

Enhanced Control at Your Fingertips

The VL701S topside control panel provides intuitive access to all your hot tub’s functions. With dedicated buttons for temperature control, jets, blower, lighting, and mode selection, you’ll have complete command over your spa experience. The clear, easy-to-read display keeps you informed of your tub’s status at all times.

Energy Efficiency

In today’s energy-conscious world, the Balboa Retrofit Kit 4.1 stands out with its energy-efficient design. The 3KW heater provides ample heating power while minimizing energy consumption, helping you keep your operating costs down without sacrificing performance.

Conclusion

The Balboa Retrofit Kit 4.1 represents the pinnacle of hot tub control technology. By upgrading your spa with this advanced system, you’re not just replacing old parts – you’re investing in a superior hot tub experience. With its combination of user-friendly controls, energy efficiency, and cutting-edge technology, this retrofit kit is the key to unlocking the full potential of your hot tub.

Upgrade your spa today and discover the difference that precision control and reliable performance can make to your relaxation and enjoyment.

 

Hot Tub Wiring – Configuring a Balboa BP7 Spa Control 4.0kW Spa Pack

If you are using a basic setup, and by basic I mean a regular dual speed hot tub pump with a single speed blower, out of the box, your Balboa pack is likely to work without any additional configuration. However, if you are not using a separate circulation pump, the chances are you will need to “configure” the pack using the details below.

On the underside of the Spa Pack covers, you will see a circuit diagram that looks something like this.

Firstly, you need to work through the setup table at the bottom on the left hand side and work out which setup number you need. For example, a 2 speed pump and a single speed blower will need setup #12.

Next, you need to change the DIP switch settings to match your setup. Once you have the right combination of DIP switches, using the topside control you should do the following to change the pack’s setup mode to #12.

To go into the low levels follow the following steps please.

1. Turn tub off.
2. DIP switch 1 move to ON.
3. Turn tub on
4. On the top side control, Press “WARM” twice
5. Press “LIGHT”
6. Press “WARM”
7. Then use “WARM” to move down to the low levels until you get on the set up number you need.
8. Turn off tub
9. DIP switch one back to OFF
10. Turn on tub

Getting the right setup and config is important for the pack to function correctly and the buttons on the top side to do what you expect them to.

 

Balboa DIP Switches Explained

Most of the Balboa Spa Packs have a set of DIP switches that can seem a little confusing in the setup. In the most basic form, you are telling the Spa Pack how many pumps or blowers you have connected and how many it should allow to run before it turns off the heater (or let them all run at once). The reason for this is if you are limiting the amount of current the pack can draw. You are also telling the pack wither you need additional cool down times if you are using an gas/propane/ASHP additional heater. This to stop the kettling effect you can get in the heaters.

Check the circuit diagram that is on the inside of your Balboa pack and do not just copy the settings I explain below as they may be in a different order. The “logic” behind them is the same so just check what each of the DIP switches says it does.

Fixed-fuction DIP Switches 

A1 Test Mode (normally Off). 

A2 In “ON” position, add one high-speed pump (or blower) with Heater. (If you have 1 pump and NO blower use this)

A3 In “ON” position, add two high-speed pumps (or 1 HS Pump and Blower) with Heater. (If you have a pump and a blower use this)

A4 In “ON” position, add four high-speed pumps (or 3 HS Pumps and Blower) with Heater. (If you have two or three pumps and a blower use this)

You should only enable one of the A2, A3 or A4. You can use them in combinations, but it is easier just to use one.

A5 In “ON” position, enables Special Amperage Rule B.  In “OFF” position, enables Special Amperage Rule A. 

Special Amperage Rule A No Limitation (if you are not sure, set it to this. Worst case, your electric will trip if you don’t have enough current available)

Special Amperage Rule B 2 High Speed Pump Maximum, in Setups 1 – 9 1 High Speed Pump Maximum, and also Blower turns off with 1 High Speed Pump, in Setups 10 – 18 (avoid this if you can)

A6 Persistent memory reset (Used when the spa is powering up to restore factory settings as determined by software configuration). 

A2, A3, and A4 work in combination to determine the number of high-speed devices and blowers that can run before the heat is disabled. i.e. A2 and A3 in the ON position and A4 in the OFF position will allow the heater to operate with up to 3 high‑speed pumps (or two HS Pumps and Blower) running at the same time. Heat is disabled when the fourth high-speed pump or blower is turned on. 

Note: A2/A3/A4 all off = No heat with any high-speed pump or blower. 

Assignable DIP Switches 

A7 In “ON” position, enables a 5-minute cooldown for some gas heaters (Cooling Time B). In “OFF” position, enables a 1-minute cooldown for electric heaters (Cooling Time A). 

 

Who are Balboa Water Group?

Balboa Water Group is a prominent manufacturer and supplier of innovative spa and hot tub components. With a rich history spanning several decades, Balboa Water Group has established itself as a leading brand in the industry, known for its cutting-edge technology, quality craftsmanship, and exceptional customer service.

Balboa Water Group specializes in designing and manufacturing spa control systems, which serve as the brains behind the operation of hot tubs and spas. These control systems include a control panel, circuit board, and other components that regulate various functions, such as temperature control, water flow, jet activation, and lighting.

One of the key strengths of Balboa Water Group is their dedication to innovation. They continuously strive to develop new and advanced technologies that enhance the spa experience for users. From user-friendly interfaces and touchscreens to wireless connectivity and smartphone apps, Balboa control systems offer convenient and intuitive control over every aspect of the spa.

Balboa Water Group also places a strong emphasis on safety and energy efficiency. Their control systems often feature built-in safety mechanisms, such as high-limit sensors and automatic shutdowns, to protect users from potential hazards. Additionally, they incorporate energy-saving features that optimize power consumption, helping to reduce operating costs and environmental impact.

In addition to control systems, Balboa Water Group offers a comprehensive range of spa components and accessories. These include pumps, heaters, filters, jets, valves, and more. Their products are known for their durability, reliability, and compatibility with various hot tub models and brands.

Customer satisfaction is a top priority for Balboa Water Group. They provide excellent technical support, troubleshooting assistance, and product documentation to help spa owners and industry professionals make the most of their products. Balboa also collaborates closely with spa manufacturers and distributors worldwide, ensuring that their components are widely available and supported.

Balboa Water Group's commitment to quality and innovation has earned them a stellar reputation within the spa industry. Whether you are a hot tub owner, a spa designer, or a service professional, choosing Balboa products can provide you with the confidence and reliability you need to create a superior spa experience.

Overall, Balboa Water Group is a trusted and respected name in the spa industry, known for its technologically advanced spa components, commitment to customer satisfaction, and ongoing pursuit of innovation. Their products and solutions continue to elevate the spa experience for users around the world.