Waterway Tiny Might: Small Pump, Big Performance

Introduction

As a dedicated hot tub enthusiast and parts supplier, I’m thrilled to introduce you to the Waterway Tiny Might circulation pump. This compact powerhouse is designed to keep your spa water crystal clear and perfectly circulated, all while maintaining energy efficiency and quiet operation.

Why Choose the Waterway Tiny Might?

The Waterway Tiny Might is a game-changer in the world of spa circulation pumps. Its innovative design and reliable performance make it an excellent choice for hot tub owners who demand the best for their home spa systems.

Key Features:

1. Efficient Performance: With its 0.28 HP motor, this pump delivers strong circulation without excessive power consumption.
2. Energy-Saving Design: Operating at 230V and drawing only 1.1 – 1.3 amps, it keeps your energy bills in check.
3. Quiet Operation: Enjoy a peaceful spa experience with this pump’s gentle, low-noise performance.
4. Improved Cooling System: The new design features a rear fan and cooling fins for enhanced reliability.
5. Compact Size: At just 250mm x 150mm x 125mm, it fits easily into most spa configurations.

Technical Specifications

To help you understand the Waterway Tiny Might’s capabilities, I’ve compiled this detailed specifications table:

Specification	Detail
Manufacturer	Waterway
Type	Circulation Pump
Power	230V, 50 Hz
Motor HP	0.28 HP
Amp Draw	1.1 – 1.3 Amps
RPM	2900
Capacitor	5 μF
Plumbing Connections	1 inch
Dimensions	Length: 250 mm, Height: 150 mm, Depth: 125 mm
Common Power Reference	200W

Installation and Compatibility

The Waterway Tiny Might is designed for easy integration into many spa systems. Its 1-inch plumbing connections make it suitable for standard spa plumbing setups. The pump comes with two temporary wire stubs, which you’ll need to replace on-site with standard cable for a permanent installation.

This versatile pump is commonly used with several spa brands, including:

• Coast Mountain Spas
• Southwest Spas
• Sierra Spas

If you’re unsure about compatibility with your specific hot tub model, don’t hesitate to reach out. I’m here to help ensure you get the right fit for your spa.

Improved Design for Enhanced Reliability

One of the reasons I’m excited about the Waterway Tiny Might is its improved design. The pump body used to be red and smooth, but due to overheating issues, Waterway has redesigned the motor. The new version features a rear fan and cooling fins, significantly enhancing the pump’s reliability and longevity.

If you’re looking to replace an older red pump, I strongly recommend this newer design. It’s an exact fit from the plastic end and has proven to be much more reliable than its predecessor.

Energy Efficiency and Quiet Operation

The Waterway Tiny Might is perfect for spa owners who want to maintain excellent water circulation without excessive noise or energy consumption. Its gentle circulation mode keeps your spa water clean and fresh while using minimal electricity. This makes it an ideal choice for those who like to keep their spas running continuously without worrying about high energy bills.

Maintenance and Care

To ensure the longevity of your Waterway Tiny Might pump, regular maintenance is key. The pump’s compact design and improved cooling system make it easier to maintain than some larger models. Regular checks and cleaning will help keep your pump running smoothly for years to come.

Additional Information

Please note that the unions for this pump need to be purchased separately. This allows for a customized installation that perfectly fits your spa’s configuration.

Conclusion

The Waterway Tiny Might circulation pump is a small but mighty addition to any compatible spa system. Its efficient performance, quiet operation, and improved reliability make it an excellent investment for maintaining the perfect hot tub experience.

As someone passionate about providing quality hot tub components, I’m confident that the Waterway Tiny Might will exceed your expectations and contribute to countless hours of relaxation in your home spa. Its compact size belies its powerful performance, making it the ideal choice for spa owners who want top-notch circulation without the bulk or noise of larger pumps.

The hot tub indistry doesnt make it easy for you when you are trying to match up the size of the unions (the part that screws your pipe work onto the pumps) Below you can see the physical sizes of the collars, and how they relate to the actual union size you need. So a measurement of 2.5", edge to edge on the collar of the pump is actually a 1.5" union - confusing - absolutely! If you are not sure, give me a shout!

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.
2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)
3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.
4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.
5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.
6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.
7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.
8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.
9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.
10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.
11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.
12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.
13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.
14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.
15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.
2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.
3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.
4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.
5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.