(Balboa Retrofit Kit 5.2) BP2100G1 + TP700 + Balboa Heat Pump (6kW)

2.Operates quietly at less than 50dBA

3.Variable speed compressor with smart algorithm

4.Fully integrated with the BP Systems and uses the same spa heating pump as the spa’s traditional electric element heater

5. Features a typical energy efficiency (COP) of 5 to 10 times a traditional spa heater and may reach up to 15 times in certain operating conditions, using less energy to keep the water hot, providing smart savings

6.Allows the spa user to set the spa BP Control System to utilize the Clim8zone™ Heat Pump alone, the spa’s traditional electric element heater alone, or both simultaneously when necessary

• System Outputs:
• Pump 1 230VAC
• – 2-Speed 12A max 15-minute timer for High Speed, 15-Minute timer for Low Speed

– 1-Speed in Setups 12, 14, 17

• This is the heater pump in Setups 1–6, 15, 18
• Must deliver 20 GPM through heater
• Pump 2 230VAC
• – 2-Speed 12A max 15-minute timer
• – 1-Speed in Setups 5, 6, 11–14, 17, 18
• Pump 3 230VAC
• – 2-Speed 12A max 15-minute timer 2-Speed in Setups 1, 7
• – 1-Speed in Setups 2, 5, 6, 8, 11–16
• – Unused in Setups 3, 4, 9, 10, 17, 18
• Blower 230VAC
• – 1 Speed 4A max 15-minute timer
• – Unused in Setups 1, 2, 4, 6–8, 10, 13, 14
• Circ Pump 230VAC
• – 1-Speed 2A max Programmable Filtration Cycles + Polling
• This is the heater pump in Setups 7–14, 16, 17
• Must deliver 20 GPM through heater
• Ozone 230VAC .5A max
• – Slaved to Circ Pump in Setups 7-14, 16, 17
• – Independent in Setups 1-6, 15, 18
• Spa Light 10VAC On/Off 1A max 240-minute timer.
• A/V (Stereo) 230VAC Hot 5A max Always on
• Heater 3.0kW @ 240VAC max

The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.

This system has been designed to be able to run from the comfort of your home or whilst you are at work or away. With the addition of the new WiFi receiver the BP2100 can be operated via Android®, iPhone®, iPod touch® or iPad®

This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.