🛁 Gecko TSC-8 (K-8) 10 Button Topside Control Panel – 3 Pump + Blower – MSPA Series Compatible

Ten-button control panel with dedicated Power button for MSPA series spa packs – ideal for 3-pump spa systems

📋 Product Overview

The Gecko TSC-8 (K-8) 10 Button Topside Control Panel (TS-GCK07) is a comprehensive spa control interface designed for use with Gecko MSPA series control boxes. This full-featured panel provides complete control over three pumps, blower, lighting, and all spa functions through a ten-button layout featuring a dedicated Power button for convenient on/off control.

Built for the MSPA series control systems (both the newer blue version and older white metal version), the TSC-8 is a popular replacement topside for many major spa brands including LA Spas, Arctic Spas, Coast Spas, Sunrise Spas, and Coast Mountain spas. The button configuration includes a dedicated Power button, making it easy to turn the entire spa system on or off with a single press.

Operating at 12V with a white plastic strip plug connection, the TSC-8 features dedicated buttons for Power, Pump 1, Pump 2, Pump 3, Blower, Light, Economy, Filter, Up, and Down. This is the ideal choice for 3-pump spa systems that require a dedicated power control button.

⭐ Key Features

• ✅ 10 Button Control – Complete spa function access
• ✅ Dedicated Power Button – Easy on/off control
• ✅ 3 Pump Control – Pump 1, Pump 2, Pump 3
• ✅ Blower Control – Dedicated blower button
• ✅ MSPA Series Compatible – Blue and white metal versions
• ✅ Multi-Brand Replacement – LA Spas, Arctic, Coast, Sunrise
• ✅ Economy Mode – Energy saving function
• ✅ Filter Control – Filtration cycle management
• ✅ 12V Operation – Safe low-voltage design
• ✅ Compact Design – 178 × 83 mm dimensions

🔧 Technical Specifications

Specification	Value
Manufacturer	Gecko
Model	TSC-8 (K-8)
SKU	TS-GCK07
Product Type	Topside Panel
Total Buttons	10
Max Pumps	3
Blower / Aux	1
Operating Voltage	12V
Length	178 mm
Width	83 mm
Connection Type	White plastic strip plug
Box Quantity	12

🔘 Button Functions & Layout

The TSC-8 features a comprehensive ten-button configuration with dedicated Power button:

Button	Function
Power	Spa system on/off control
Pump 1	Controls pump 1 (low/high speed)
Pump 2	Controls pump 2 (low/high speed)
Pump 3	Controls pump 3
Blower	Activates air blower
Light	Controls spa lighting
Economy	Economy/energy saving mode
Filter	Filtration cycle control
Up	Temperature increase / menu navigation
Down	Temperature decrease / menu navigation

Display Shows:

• Current water temperature
• Set temperature
• Mode indicators (heating, filtering, etc.)
• Error codes from spa pack

🔗 Compatibility Guide

✅ Compatible Control Systems

System	Version	Compatible
Gecko MSPA Series	Blue version (newer)	✅ Yes
Gecko MSPA Series	White metal (older)	✅ Yes

✅ Compatible Spa Brands

Brand	Status
LA Spas	✅ Compatible
Arctic Spas	✅ Compatible
Coast Spas	✅ Compatible
Coast Mountain	✅ Compatible
Sunrise Spas	✅ Compatible
Other MSPA-equipped spas	✅ Compatible

⚠️ Important: The TSC-8 is designed specifically for MSPA series control boxes. Verify your spa uses an MSPA control system before ordering.

🔄 TSC-4 vs TSC-8 Comparison

Feature	TSC-4 10-Button (TS-GCK04)	TSC-8 10-Button (TS-GCK07)
Total Buttons	10	10
Max Pumps	3	3
Blower	1	1
Power Button	❌ No	✅ Yes
Clock Button	✅ Yes	❌ No
Economy/Econo	✅ Econo	✅ Economy
Filter	✅ Yes	✅ Yes
Light	✅ Yes	✅ Yes
Dimensions	178 × 83 mm	178 × 83 mm
Box Quantity	12	12

Choose TSC-8 (TS-GCK07): If you need a dedicated Power button for on/off control

Choose TSC-4 (TS-GCK04): If you need a Clock function instead of Power button

---

🔌 Connection Information

Connector Type:

• White plastic strip plug
• Multiple thin wires configuration
• Connects to MSPA control box topside port

Connection Notes:

• The white plastic strip plug is specific to MSPA series systems
• Ensure connector matches your existing topside connection
• If unsure, contact Parts4Tubs with your spa make and model

📐 Dimensions & Mounting

Measurement	Value
Length	178 mm
Width	83 mm
Cutout	See drilling template

Drilling Template Available: A drilling template document is available for download to ensure correct cutout dimensions for new installations or when replacing a different size panel.

---

🔄 Replacement Applications

The TSC-8 is commonly used as a replacement for:

3-Pump Spa Systems:

• Spas requiring dedicated Power button control
• Systems with 3 jet pumps plus blower
• Premium spa configurations

Compatible Brands:

• LA Spas with 3-pump setup
• Arctic Spas (3-pump models)
• Coast Spas / Coast Mountain
• Sunrise Spas
• Any MSPA system with 3-pump configuration

🛠️ Installation Guide

Before Installation:

• ⚠️ Disconnect power to spa at the isolator/breaker
• ⚠️ Verify MSPA control box compatibility
• ⚠️ Check connector type matches existing panel
• ⚠️ Review drilling template if changing cutout size

Installation Steps:

1. Power Off – Isolate all electrical supply to spa
2. Remove Old Panel – Carefully remove existing topside
3. Disconnect Cable – Unplug white strip connector from control box
4. Check Cutout – Verify mounting hole fits (use template if needed)
5. Connect New Panel – Plug white strip connector into control box
6. Mount Panel – Secure TSC-8 in mounting position
7. Power On – Restore power and test all functions

Testing Checklist:

• [ ] Display powers on and shows temperature
• [ ] Power button turns spa on/off
• [ ] Pump 1, 2, 3 buttons activate respective pumps
• [ ] Blower button activates air blower
• [ ] Light button controls spa lighting
• [ ] Up/Down buttons adjust temperature
• [ ] Economy and Filter buttons respond

🔍 Troubleshooting

Common Issues:

Problem	Possible Cause	Solution
Blank display	No power / loose connection	Check power, reseat connector
Power button unresponsive	Connection issue	Check connector seating
Partial display	Display fault	May need replacement
Buttons unresponsive	Overlay wear / moisture	Check overlay condition
Wrong temperature	Sensor issue (not topside)	Check temperature sensor
Error codes	Various spa pack issues	Refer to MSPA manual
Connector doesn’t fit	Wrong control system	Verify MSPA compatibility

Error Codes: Error codes displayed are generated by the MSPA control box, not the topside panel. Refer to your MSPA control system manual for error code meanings.

---

🛡️ Maintenance & Care

Routine Care:

Task	Frequency
Wipe with damp cloth	Weekly
Check button response	Monthly
Inspect cable connection	Annually
Check overlay condition	Annually

DO NOT:

• ❌ Use abrasive cleaners
• ❌ Submerge panel in water
• ❌ Use solvent-based cleaners
• ❌ Press buttons with sharp objects
• ❌ Allow water to enter connector area

♨️ Ideal Applications

Application	Suitability
♨️ 3-pump spa systems	✅ Ideal
♨️ Spas needing Power button	✅ Ideal
♨️ LA Spas replacement	✅ Compatible
♨️ Arctic Spas upgrade	✅ Compatible
♨️ Coast Spas replacement	✅ Compatible
♨️ Any MSPA 3-pump system	✅ Compatible
❌ 2-pump spa systems	❌ Use 8-button model
❌ Need Clock function	❌ Use TSC-4 model
❌ IN.XM / IN.XE systems	❌ Not compatible
❌ IN.Y Series systems	❌ Not compatible

Common Replacement Scenarios:

• 🔧 Cracked or damaged display
• 🔧 Unresponsive buttons
• 🔧 Water damage to existing panel
• 🔧 Faded or worn overlay
• 🔧 Upgrading to panel with Power button
• 🔧 Complete spa refurbishment

❓ Frequently Asked Questions

Q: What’s the difference between TSC-4 and TSC-8?

A: The main difference is button configuration. The TSC-8 has a dedicated Power button for on/off control, while the TSC-4 has a Clock button instead. Both control 3 pumps + blower.

Q: What does the Power button do?

A: The Power button provides convenient on/off control for the spa system. Press to turn the spa on or off without needing to access other controls.

Q: What control system does this work with?

A: The TSC-8 works with Gecko MSPA series control boxes – both the newer blue version and the older white metal version.

Q: What type of connector does it use?

A: It uses a white plastic strip plug with multiple thin wires, which is the standard connection for MSPA series systems.

Q: Will this work with my Arctic Spas?

A: Yes, Arctic Spas that use Gecko MSPA control systems are compatible with the TSC-8.

Q: How many pumps can this control?

A: The TSC-8 can control up to 3 pumps (Pump 1, Pump 2, Pump 3) plus a blower.

Q: What voltage does it operate at?

A: The TSC-8 operates at 12V, which is provided by the MSPA control box.

Q: What are the dimensions?

A: The panel measures 178 mm (length) × 83 mm (width). A drilling template is available for cutout requirements.

Q: Will this work with IN.XE or IN.YJ systems?

A: No, the TSC-8 is designed specifically for MSPA series control boxes and is not compatible with newer IN.X or IN.Y series systems.

Q: Does this have a Clock function?

A: No, the TSC-8 has a Power button instead of Clock. If you need Clock functionality, choose the TSC-4 model (TS-GCK04).

🏆 Why Choose the Gecko TSC-8 (K-8) (TS-GCK07)

• ✅ 10 Button Control – Full spa function access
• ✅ Dedicated Power Button – Convenient on/off control
• ✅ 3 Pumps + Blower – Comprehensive output control
• ✅ MSPA Compatible – Works with blue and white metal versions
• ✅ Multi-Brand Fit – LA Spas, Arctic, Coast, Sunrise
• ✅ Economy & Filter Functions – Advanced features built-in
• ✅ 12V Safe Operation – Low voltage design
• ✅ Compact Design – 178 × 83 mm footprint
• ✅ Drilling Template Available – Easy installation support
• ✅ Genuine Gecko Product – Quality assured

🇬🇧 Why Buy from Parts4Tubs

• ✅ UK-based company with local support
• ✅ Fast UK delivery
• ✅ Expert advice from spa specialists
• ✅ Compatibility assistance available
• ✅ Full warranty support
• ✅ Easy returns within 30 days

✨ Summary

The Gecko TSC-8 (K-8) 10 Button Topside Control Panel (TS-GCK07) provides comprehensive spa control for 3-pump MSPA series systems with dedicated Power button. Features 10 buttons controlling Power on/off, 3 pumps, blower, light, economy mode, and filtration with temperature adjustment. Compatible with Gecko MSPA series control boxes (both blue and white metal versions) and serves as an ideal replacement for LA Spas, Arctic Spas, Coast Spas, Coast Mountain, Sunrise Spas, and other MSPA-equipped 3-pump spas. Operating at 12V with white plastic strip plug connection, the panel measures 178 × 83 mm. Choose TSC-8 for Power button control; choose TSC-4 (TS-GCK04) if you need Clock function instead. Drilling template available for installation. Box quantity 12. Order from Parts4Tubs for fast UK delivery and expert compatibility assistance.